Read text on pocket pc PDA

I have been reading various issues on reading text on the PDA but I can't seem to solve it. When I run the VI on the desktop, everything runs perfect. But when I put it on the PDA, nothing works. I'm attaching the VI and the text file that I am using on the desktop. I looked at the text file on the PDA itself and it looks different that when I transfer it to the desktop. It gets converted somehow. Anyways, I've also attached an example of how the text looks on the PDA. Please help.
Marcos
Attachments:
pda text example.txt ‏2 KB
testing pda read.vi ‏23 KB
Desktop text example.txt ‏16 KB

I actually can't read anything on the PDA when I select the text file. I have tried every which way I could think of to save data and read data. But I don't know what the problem is. Every method I use on the desktop works, but as soon as I transfer to PDA, I can't read anything. Attached is the VI that I use to acquire data. I use the standard acquire multiple analog signals vi for the pda but I added the index array function to separate the array into its three signals that I had coming into the CF-6004. Then I convert those arrays into strings that are tab delimited and into the save binary file. (I even tried to save at text file but I get the same results and problems). So when I recorded data, it was at 500 samples per channel and I had 4 acquisitions per signal. So signal 0 generates a text file with 4 different blocks of 500 samples a piece. The example of the text file is in the previous message I left. However this is how it looks when I transfer from PDA to desktop. When I look at the data directly on the PDA, the data is formed the same way. But I can't read it on the PDA. When I tried reading using the read text file vi ( with some slight modifications) for the PDA, nothing comes out. I can't see the time stamp, which would be the very first data point. However, what is odd is that I can move the cursor on the time stamp box 4 rows. No more and no less. Which means the text reader knows that there are 4 blocks of data that it needs to read, but it is just not displaying the data. What do you suppose is the problem?
Attachments:
June 15 PDA timing in seconds.vi ‏50 KB

Similar Messages

How to create and read text file using LabVIEW 7.1 PDA module?

How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
I attach my code here.
Attachments:
File_IO.vi ‏82 KB

Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

Is the PCMCIA-232/4 compatable with Pocket PC/PDA?

I am interested in integrating a pocket pc or pda (no moving parts) with the pcmcia-232/4 for some pseudo-realtime applications (anything rs-232 is pseudo realtime IMHO). The Pocket PC will collect/manage data from the rs-232 and issue commands to the rs-232 ports. I would prefer to use winCE as my OS (not my choice but I did not make the requirement)and a simple high level language to control the ops (again, high level languages are nearly always pseudo-realtime IMHO).
What would NI recommend as far as obtaining compatability of the pocket pc/pda, pcmcia-232/4, and win CE?
Also, does NI have any "high level" language support for managing data and issuing commands?
Thanks,
KTM

LabVIEW PDA (http://sine.ni.com/apps/we/nioc.vp?cid=12219〈=US) is the recommended high level language support for managing data and issuing commands. It was developed for both Palm OS and Pocket PCs. Currently there is not a pcmcia-232/4 driver written for either the pocket pc or palm os. If you could find a PCMCIA serial card with driver (dll) written for the pocket pc, it could be interfaced through a call library function node.

How to send texts via bluetooth linked PDA

I would like to be able to send text messages from my PDA via my bluetooth linked Nokia 6320i.
Please can anyone tell me how to do this or recommend any software for my WM5.0 PDA to be able to do it?
Thanks,
Stuart

23-Apr-2008 08:58 AM
psychomania wrote:
It can't be done.
The 6230i doesn't have the ability to move messages by bluetooth and I don't think WM5 has it either.
That's a downer.
I was wondering if there was any third party software out there that anyone used for PDA - I can send messages from my PC using the Nokia PC Suite, connecting my phone by bluetooth. It would be really useful to do the same from my PDA.

How to download / read text attachment in Sender Mail Adapter IN XI

Hi
I would like to know how to download / read text attachment in sender mail Adapter & sent same attachment to target system using file adapter.
Please help how to design / resolve this concept.
Regards
DSR

I would like to know how to download / read text attachment in sender mail Adapter & sent same
attachment to target system using file adapter.
Take help from this blog:
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
From the blog:
However in most cases
our message will not be a part of the e-mail's payload but will be sent as a file attachment.
Can XI's mail adapter handle such scenarios? Sure it can but with a little help
from the PayloadSwapBean adapter module
Once your message (attachment) is read by the sender CC, you can perform the basic mapping requirement (if any) to convert the mail message fromat to the file format.....configure a receiver FILE CC and send the message...this should be the design...
Regards,
Abhishek.

How to read text from a web page

I want to read text from a web page. Can any body tell me how to do it.

Ok i tell you detail. visit the site " http://seriouswheels.com/" you will a index from A to Z which are basically car name index i want to read each page get car name and its model and store it in data base. I you can provide me the code i will be very thankful.

How to read text from PDF and HTML

I have got solution to read text form .txt file but did'nt get code for PDF and HTML.
I dont want to convert PDF to txt.
Please help me ...

reading from a file is always the same. using the same strategy used for a .txt will allow you to read a .pdf file.
Offcourse in itself it will be useless becuase pdf files have a special internal structure.
html files are identical to txt files.
What are you trying to accomplisch with the files you are reading ?

Reading text from server socket stream

I have a basic cd input program i've been trying to figure out the following problem for a while now, the user enters the artist and title etc and then a DOM (XML) file is created in memory this is then sent to the server. The server then echos back the results which is later printed on a html page by reading the replys from the server line by line.
The server must be run it listens for clients connecting the clients connect and send DOM documents through the following jsp code.
<%@page import="java.io.*"%>
<%@page import="java.net.*"%>
<%@page import="javax.xml.parsers.*"%>
<%@page import="org.w3c.dom.*"%>
<%@page import="org.apache.xml.serialize.*"%>
<%!
   public static final String serverHost = "cdserver";
   public static final int serverPort = 10151;
%>
<hr />
<pre>
<%
        Socket mySocket = null;          // socket object
        PrintWriter sockOut = null;      // to send data to the socket
        BufferedReader sockIn = null;    // to receive data from the socket
        try {
            // #1 add line that creates a client socket
            mySocket = new Socket(serverHost, serverPort);
            // #2 add lines that create input and output streams
            //            attached to the socket you just created
             sockOut = new PrintWriter(mySocket.getOutputStream(), true);
             sockIn = new BufferedReader(new InputStreamReader(mySocket.getInputStream()));
        } catch (UnknownHostException e) {
            throw e; // This time the JSP can handle the exception, not us
        } catch (IOException e) {
            throw e; // This time the JSP can handle the exception, not us
String cdTitle, cdArtist, track1Title, track1Time, track1Rating;
// Retrieve the HTML form field values
cdTitle = request.getParameter("cdtitle");
cdArtist = request.getParameter("cdartist");
track1Title = request.getParameter("track1title");
track1Time = request.getParameter("track1time");
track1Rating = request.getParameter("track1rating");
// Create a new DOM factory, and from that a new DOM builder object
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
// Note that we are creating a new (empty) document
Document document = builder.newDocument();
// The root element of our document wil be <cd>
// It gets stored as the child node of the whole document (it is the root)
Element rootElement = document.createElement("cd");
document.appendChild(rootElement);
// Create an element for the CD title called <title>
Element cdTitleElement = document.createElement("title");
// Add a text code under the <title> element with the value that
// the user entered into the title field of the web form (cdTitle)
cdTitleElement.appendChild(document.createTextNode(cdTitle));
// Place the <title> element underneath the <cd> element in the tree
rootElement.appendChild(cdTitleElement);
// Create an <artist> element with the form data, place underneath <cd>
Element cdArtistElement = document.createElement("artist");
cdArtistElement.appendChild(document.createTextNode(cdArtist));
rootElement.appendChild(cdArtistElement);
// Create a <tracklist> element and place it underneath <cd> in the tree
// Note that it has no text node associated with it (it not a leaf node)
Element trackListElement = document.createElement("tracklist");
rootElement.appendChild(trackListElement);
// In this example we only have one track, so it is not necessary to
// use a loop (in fact it is quite silly)
// But the code below is included to demonstrate how you could loop
// through and add a set of different tracks one by one if you
// needed to (although you would need to have the track data already
// stored in an array or a java.util.Vector or similar
int numTracks = 1;
for (int i=0; i<numTracks; i++) {
String trackNum = Integer.toString(i+1);
Element trackElement = document.createElement("track");
trackElement.setAttribute("id", trackNum);
trackListElement.appendChild(trackElement);
// Track title element called <title>, placed underneath <track>
Element trackTitleElement = document.createElement("title");
trackTitleElement.appendChild(document.createTextNode(track1Title));
trackElement.appendChild(trackTitleElement);
// Track time element called <time>, placed underneath <track>
Element trackTimeElement = document.createElement("time");
trackTimeElement.appendChild(document.createTextNode(track1Time));
trackElement.appendChild(trackTimeElement);
// Track rating element called <rating>, placed underneath <track>
Element trackRatingElement = document.createElement("rating");
trackRatingElement.appendChild(document.createTextNode(track1Rating));
trackElement.appendChild(trackRatingElement);
OutputFormat format = new OutputFormat();
format.setIndenting(true);
// Create a new XMLSerializer that will be used to write out the XML
// This time we will serialize it to the socket
// #3 change this line so that it serializes to the socket,
// not to the "out" object
XMLSerializer serializer = new XMLSerializer(writer, format);
serializer.serialize(document);
        // Print out a message to indicate the end of the data, and
        // flush the stream so all the data gets sent now
        sockOut.println("");
        sockOut.flush();
        BufferedReader stdIn = new BufferedReader(new InputStreamReader(System.in));
        String fromServer;
        String fromUser;
         #4 add a while loop that reads text from the
        server socket input stream, line by line, and prints
        it out to the web page, using out.println(...);
        Note that because the reply from the server will contain
        XML, you will need to call upon the toHTMLString() method
        defined below to escape the < and > symbols so that they
        will display correctly in the web browser.
        Also note that as you receive the reply back from the
        server, you should look out for the special 
        string that will indicate when there is no more data
        to receive.
        while ((fromServer = sockIn.readLine()) != null) {
        out.println(sockIn.readLine());
            // If the reply from the server said "QUIT", exit from the
            // while loop by using a break statement.
            if (fromServer.equals("QUIT")) {
                out.println("Connection closed - good bye ...");
            // Print the text from the server out to the user's screen
            out.println("Reply from Server: " + fromServer);
            // Now read a line of text from the keyboard (typed by user)
            fromUser = stdIn.readLine();
            // If it wasn't null, print it out to the screen, and also
            // print a copy of it out to the socket
            if (fromUser != null) {
                out.println("Client: " + fromUser);
                sockOut.println(fromUser);
        // Close all the streams we have open, and then close the socket
        sockOut.close();
        sockIn.close();
        mySocket.close();
%>
I'm suppose to modify the commented sections labled with #.
#1,2 are correct but i have doubts on the 3rd and 4th modification.
for #3 i changed so i serializes to the socket not to the "out" object:
from
XMLSerializer serializer = new XMLSerializer(out, format);
to
XMLSerializer serializer = new XMLSerializer(writer, format);
with "out" it prints out some of the results entered but it just hangs i'm thinking it might be the while loop that i added in #4. If i changed it to serialize the socket XMLSerializer serializer = new XMLSerializer(writer, format); it doesn't print out nothing at all; just a blank screen where it hangs.
I can post the rest of the code (server thats in java and cdinput.html) but since i want to keep my post short and if required i'll post it later on i also omitted some of the code where it creates the DOM textnodes etc to keep my post short.

On your previous thread, why did you say the server was using http POST and application/xml content type when it quite obviously isn't, but a direct socket communication that abuses XML comments for message end delimiters?
The comments imply you need to wait for "" on a line by itself, but your loop is waiting for "QUIT".
Pete

Is there a way to have the iPad 2 "read" text from iBooks as with web sites or pages?

is there a way to have the iPad 2 "read" text from iBooks as with web sites or pages? A different App perhaps?

Isn't that you asking how to get it (undefined) back?
If you never had Pages '09, you can buy it from Amazon very cheaply:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&sid=f68e84cd2ec6 123bd2ed93806c7e7fb6&mforum=iworktipsntrick
Peter

What is use of Read-Text command in Sapscript plz replay

What is use of Read-Text command in Sapscript plz replay
i m geting problem with read-text command in sapscript as will as
perform and endperform .

Hi Majid,
It's a function module to read the texts from a text file. Generally it is used to retrieve the long texts.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ´
ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
Br,
laxmi.

Reading text file to make a list

Hello ,
I want to read a specific column from the text file if the columns are separated by a space.
When the whole file (as shown here http://imageshack.com/a/img834/6321/k55hx.jpg
) is read its column1 names should be visible in a drop list and whenever a name is selected from the list it should select its respective value from column2 in the text file and display the value in indicator.
I tried as shown here(http://imageshack.com/a/img829/6821/x4h0.jpg ) and got the output like this(http://imageshack.com/a/img840/1431/ior7.jpg ) but I am unable to get the required.
Can someone help me out with this.
Thanks.

Hi stefan57.
If I understand you correctly, you are trying to make a dropdown list with the values from the first coloum, and when the user changes this values, you want the data to be shown.
I have made a small exampled that demostrates how this can be done.
(please note, that this code should be further improved, eg. by implementing proper error handling)
Best Regards
Alex E. Petersen
Certified LabVIEW Developer (CLD)
Application Engineer
Image House PantoInspect
Attachments:
Read Text.vi ‏25 KB
File.txt ‏1 KB

Reading text file to JEditorPane

Hi,
I'm trying to read text file to JEditorPane and it works but first line is always missing. Here is the code for reading:
try {
   in = new BufferedReader(new FileReader(filePathIn));
   while ((lineIn = in.readLine()) != null) {
        editorPane.read(in, new Object());
} catch (IOException ie)...Any suggestions?

in.readLine is changing the input stream position.
Do this instead:
FileInputStream in = new FileInputStream(filePathIn);
while (in.available() != 0)
    editorPane.read(in, new Object());

Read text from purchase order.

I have few queries regarding texts in a document.
1. How do i identify the id for a text of a line item in any PO document?
2. Secondly a pgm is using read_text to get this text. before which 'stxh' is queried. But when i debugged i found that for a particular document there is no entry in this table though there is a text in the document and hence doesnot perform a read_text. The text is auto generated through info records. How to retrieve this text?
Ans wil be appreciated and rewarded

Hi Ravikumar thanks for u quick reply.
This is wht is currently coded.
concatenate values to get item text for read text function
   invar3+0(10) = invar1. "PO number
   invar3+10(5) = invar2. "PO line number
   SELECT SINGLE * FROM stxh WHERE tdobject = 'EKPO'
                               AND tdname   = invar3
                               AND tdid     = 'F01'
                               AND tdspras = sy-langu.
   IF sy-subrc = 0.
     invar4 = invar3.
reading the text for the document items.
     CALL FUNCTION 'READ_TEXT'
       EXPORTING
         id       = 'F01'
         language = sy-langu
         name     = invar4
         object   = 'EKPO'
       TABLES
         lines    = it_itab.
I have seen some PO's which have info rec texts in that, which gets pulled by the above code...first thing is its id is F02 which exist in STXH table also there is other text with F01 id, and hence the table it_itab gets both these text hence no pbm.
but i came across a PO which has only one text which is info rec text with id F05 and is not store in stxh and hence doesnot get pulled by read_text fm. How do i change my cod to get this text which should not hamper other PO's as well.
As mentioned in above msgs, this F05 could be retrieved by providing object name as EINE.
anyhelp will be appreciated and rewarded.
thanks

Indesign CS3-JS - Problem in reading text from a text file

Can anyone help me...
I have an problem with reading text from an txt file. By "readln" methot I can read only the first line of the text, is there any method to read the consecutive lines from the text file.
Currently I am using Indesign CS3 with Java Script (for PC).
My Java Script is as follows........
var myNewLinksFile = myFindFile("/Links/NewLinks.txt")
var myNewLinks = File(myNewLinksFile);
var a = myNewLinks.open("r", undefined, undefined);
myLine = myNewLinks.readln();
alert(myLine);
function myFindFile(myFilePath){
var myScriptFile = myGetScriptPath();
var myScriptFile = File(myScriptFile);
var myScriptFolder = myScriptFile.path;
myFilePath = myScriptFolder + myFilePath;
if(File(myFilePath).exists == false){
//Display a dialog.
myFilePath = File.openDialog("Choose the file containing your find/change list");
return myFilePath;
function myGetScriptPath(){
try{
myFile = app.activeScript;
catch(myError){
myFile = myError.fileName;
return myFile;
Thanks,
Bharath Raja G

Hi Bharath Raja G,
If you want to use readln, you'll have to iterate. I don't see a for loop in your example, so you're not iterating. To see how it works, take a closer look at FindChangeByList.jsx--you'll see that that script iterates to read the text file line by line (until it reaches the end of the file).
Thanks,
Ole

How to read text in .kep files

hey friends,
how to read text in .kep files
please help me .
with regards,
s.jagadeesh babu

Hi,
check this link:
http://help.sap.com/saphelp_nw04s/helpdata/en/8f/42a293e35011d29b340000e8a4b41d/content.htm
.kep files are SapShow Training Files. They can be played with sapshow.exe in Knowledge Warehouse.
SAP Show is KW Viewer Application. You can use it to see Kep files. It can be run in windows without the SAP environment. To run SAP Show (4.6D version) you just need 3 files. First is SAP show executable file, another two are Sapstg.dll and ZLib.dll. You can easily find these files on internet.
Regards,
Niraj

Read text on pocket pc PDA

Similar Messages

Maybe you are looking for