Read the output of the iseries CL Program from Java

I have a Java program running on the iseries(AS400). I need to call a CL program from this JAVA.I have to pass 7 arguments to it.Out of 7, three are input parameters to CL and other 4 are its output parameters to the calling JAVA program. I am using Runtime.getRuntime().exec(arguments) to call the CL. Please suggest me how to read the output from the CL in the JAVA program.

http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
Kidding:
If a method has at least 7 parameters, chances are one or two have been forgotten.

Similar Messages

Where to see the output of my Application Engine Program ?

Folks,
Hello. I am creating my first AE program in Application Designer and test it in the 2-tier mode. I open the AE program in Appication Designer and click Edit ->Run Program. Then open the log file to see its execution and know the AE program is running out. But I don't know where to see the output of the AE program.
The AE program is only executing a SQL "select" statement. Its output is the ResultSet of the SQL.
Do any folks know where to see the output of the AE program ?
Thanks in advanced.

The AE program is only executing a SQL "select" statement. Its output is the ResultSet of the SQL.
Do any folks know where to see the output of the AE program ?The output of the select didn't go anywhere. You have to actually do something with the values selected. App Engine selects them and puts them in memory (if you tell it to through %Select), but where those values go depends on you. If you have a DoSelect, then your next action may be an SQL insert/update/delete or even another %Select. If it is another %Select, then I would expect your next action to be Call Section or PeopleCode.
If you just want to select data and print it to the app engine log file, then I would setup a step with a DoSelect/%Select and then a PeopleCode action. In your PeopleCode action, use MessageBox(0, "", 0, 0, "The value in field MYFIELD is " MYREC_AET.MYFIELD);
I wrote a blog post a few years ago with additional tips and tricks for AppEngine output: http://jjmpsj.blogspot.com/2008/05/appengine-output-tricks-reporting.html.

[OLAP DML] display on screen the output while the program is running

Hi,
I'm running a script in AWM that is quite long, and I've placed some few 'show' so that I know what the program is doing, but it won't show on the screen the outputs until the program ends. I guess it writes all the outputs in a kind of buffer and release the content of the buffer at the end of the program.
How could I have it to release this buffer continuously?
Thanks

i think the relational analogy would be an anonymous pl/sql block executing a list of commands while outputting a list of useful dbms_output.put_line log statements:
Just as with SHOW and olap worksheet cmd line, you cant see the running dbms_output log while the pl/sql program is running... you need to wait for it to complete before you can see the log.
You can write to a file and close/exit the file each time or you can write to log table and commit each time but i guess, some such heavy lifting is needed if you want to track the long running process mid-way.
NOTE: For regular operations like dbms_cube.build load/forecast/allocate process/steps, you can always run queries against CUBE_BUILD_LOG etc mid-way. But if it's pure olap dml actions being performed then no neat pre-built handle to check things mid-way exists.

Selection-screen in the output of the program

Hi,
I want to print the selection criteria ( or Values ) in the output of the program on the RIGHT HAND SIDE OF THE HEADER. I am doing code through ALV and I want to include the respective code in 'TOP_OF_PAGE'
If there are no values in the selection screen fields, then I DO NOT Print them. Start the values with the texts, such as 'Material', 'Plant', 'MRP Controller' etc. For single values, print the values separated by commas, For a range of values, print the values separated by '-', For the exclusion of single values, print 'EX' before the values.
Thanks in Advance.

To get the parameter list, use [RS_REFRESH_FROM_SELECTOPTIONS|https://forums.sdn.sap.com/search.jspa?objID=c42&q=RS_REFRESH_FROM_SELECTOPTIONS], the rest is basic Abap.
Regards,
Raymond

Can't understand the output of the exercise

here is the problem:-
An audio signal is sometimes stored as a list of int values. The values represent the intensity of the signal at successive time intervals. Of course, in a program the signal is represented with an array.
Often a small amount of noise is included in the signal. Noise is usually small, momentary changes in the signal level. An example is the "static" that is heard in addition to the signal in AM radio.
Smoothing a signal removes some of the noise and improves the perceptual quality of the signal. This exercise is to smooth the values in an integer array.
Say that the original values are in the array "signal". Compute the smoothed array by doing this: Each value smooth[N] is the average of three values: signal[N-1], signal[N], and signal[N+1].
For the first element of smooth, average the first two elements of signal. For the last element of smooth, average the last two elements of signal.
here is the original data for the signal array.
int[] signal = {5, 5, 4, 5, 6, 6, 7, 6, 5, 4, 1, 4};i had to declare another array by the name of smooth.
int[] smooth Now i am having a big problem. here is the output of the program from author point of view using the original data in signal array.
C:\>java Smooth
signal: 1 5 4 5 7 6 8 6 5 4 5 4
smooth: 3 3 4 5 6 7 6 6 5 4 4 4
C:\>i got completely lost. the original signal data is replaced by a new one but how ? if i can get a more detail explanation on this problem by anyone it would be great. so i thought to assign some duke dollars if i can understand the logic not trying to be greedy but to see who is a good teacher. thanks.
once i get a good explanation i can go ahead and start coding and see if i can achieve this. i am pretty much sure it is a simple task but author made it looks like my worst nightmare.

here is the problem:-
An audio signal is sometimes stored as a list of int values. The values represent the intensity of the signal at successive time intervals. Of course, in a program the signal is represented with an array.
Often a small amount of noise is included in the signal. Noise is usually small, momentary changes in the signal level. An example is the "static" that is heard in addition to the signal in AM radio.
Smoothing a signal removes some of the noise and improves the perceptual quality of the signal. This exercise is to smooth the values in an integer array.
Say that the original values are in the array "signal". Compute the smoothed array by doing this: Each value smooth[N] is the average of three values: signal[N-1], signal[N], and signal[N+1].
For the first element of smooth, average the first two elements of signal. For the last element of smooth, average the last two elements of signal.
here is the original data for the signal array.
int[] signal = {5, 5, 4, 5, 6, 6, 7, 6, 5, 4, 1, 4};i had to declare another array by the name of smooth.
int[] smooth Now i am having a big problem. here is the output of the program from author point of view using the original data in signal array.
C:\>java Smooth
signal: 1 5 4 5 7 6 8 6 5 4 5 4
smooth: 3 3 4 5 6 7 6 6 5 4 4 4
C:\>i got completely lost. the original signal data is replaced by a new one but how ? if i can get a more detail explanation on this problem by anyone it would be great. so i thought to assign some duke dollars if i can understand the logic not trying to be greedy but to see who is a good teacher. thanks.
once i get a good explanation i can go ahead and start coding and see if i can achieve this. i am pretty much sure it is a simple task but author made it looks like my worst nightmare.

Make the output of the BI report rtf file some fields non editable

Hello All,
I want to make some fields in the output of the BI report as editable and some non editable. Any output format is fine (PDF, RTF or HTML) Please let me know if anyone knows how to do it.
Thanks in advance..
Anu

You can add RTF to active allowed output type list (provided that your reporting system supports it) by going to CustomerReportExtensions.xml file and adding the following node right after ParameterTypes node:
<ActiveReportOutputTypes configChildKey="key">
<ActiveReportOutputType key="RTF" value="RTF" extension=".rtf"/>
</ActiveReportOutputTypes>

I have s mac book pro--I would like very much to have the output to the DVI cable --my audio(sound) wilkl nit default to DVI output --How can this be changed

I have a mac book pro--I would like very much to have the output to the DVI cable --my audio(sound) wilkl nit default to DVI output --How can this be changed, so it does not default to interabnl speaker
Is there a way to force the system to change to DVI output?????
thanks a lot

Hi there,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
-Griff W.

LabVIEW 6.1 If For Loop count terminal is zero then value going through the loop is not passed on to the output of the loop

Hello, one of our customers just encountered an execution error in a vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or 6.01. I have a simple vi that has two encapsulated For Loops. Two string arrays go in, one goes out of the outer loop. Inside the outer loop the first array is indexed. The string which results from this indexing is compared with all other strings from the second string array in the inner loop. If it matches one of the strings of the second array, it is not outputted, otherwise this string goes through the inner For Loop to the output of the inner loop and from there to the output of the outer loop. The count
terminal of the outer/inner loop is connected to the Array Size of the first/second string array. If the second array is empty, that means that the element in test from the first arry cannot match anything from the second array, so the element in test is send to the output of the inner loop and from there to the output of the outer loop. This works fine in LabVIEW 5.1 and 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never executed if the count value is zero (which is correct), but the data line running through the loop is not executed either, which is different to what LabVIEW 5.1 and 6.01 do. There, the input string is sent to the output of the inner loop correctly even if the loop counter is zero. The solution is easy - I just have to connect the output of the outer loop to the data line BEFORE it enters the inner loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is supposed to be a feature, but it brings some incompatibility in programming between the
different LabVIEW versions.
Best regards,
Gabsi

Hi,
When a for-loop runs zero times, all outputs are 'undefined' (and should
be).
Besides, how would LV know what the output of a not executed routine should
be?
It might be handled differently in LV5 and LV6, which is unfortunate. In
both cases, the result is undefined.
It's not a bug. It's just something that should be avoided in any LV
version.
> The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
In some cases this does the trick. But if the data is changed in the inner
loop, this will effect the results if the N is not zero.
Technically, I think the output in this construction is also 'undefined'.
But LV handles this as expected / desired.
Another solution is to use a shift register. If N is zero, the input is
directly passed through to the output.
Regards,
Wiebe.
"Gabs" wrote in message
news:[email protected]...
> LabVIEW 6.1 If For Loop count terminal is zero then value going
> through the loop is not passed on to the output of the loop
>
> Hello, one of our customers just encountered an execution error in a
> vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or
> 6.01. I have a simple vi that has two encapsulated For Loops. Two
> string arrays go in, one goes out of the outer loop. Inside the outer
> loop the first array is indexed. The string which results from this
> indexing is compared with all other strings from the second string
> array in the inner loop. If it matches one of the strings of the
> second array, it is not outputted, otherwise this string goes through
> the inner For Loop to the output of the inner loop and from there to
> the output of the outer loop. The count terminal of the outer/inner
> loop is connected to the Array Size of the first/second string array.
> If the second array is empty, that means that the element in test from
> the first arry cannot match anything from the second array, so the
> element in test is send to the output of the inner loop and from there
> to the output of the outer loop. This works fine in LabVIEW 5.1 and
> 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never
> executed if the count value is zero (which is correct), but the data
> line running through the loop is not executed either, which is
> different to what LabVIEW 5.1 and 6.01 do. There, the input string is
> sent to the output of the inner loop correctly even if the loop
> counter is zero. The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
> supposed to be a feature, but it brings some incompatibility in
> programming between the different LabVIEW versions.
> Best regards,
> Gabsi

How to execute the output of the below query automatically

Hi All,
I want to execute the output of the below query automatically, instead of manually copying it and execute.
select 'alter database ['+name+'] set recovery simple' from master.sys.databases where database_id > 4 and state_desc = 'online'
Please provide me a script to do this.
ThanK
Kate

EXEC sp_MSforeachdb N'ALTER DATABASE [?] SET recovery simple';--- This will set the recovery model for all the system database.The query provided by Vikash16, meets my requirement. Thank you.

Can you change the color of the output in the console?

When you run your program using NetBeans the color of the output in the console window is black. Is there any way to change the color of the output to say blue?

Hi AJL,
There is no way to color rows of the table control in a SUDialog. You could consider using the ActiveX container control and using the Microsoft ActiveX table control, which might have that functionality. Note though, that then you need to either ensure that control is always on all your client machines or make provisions for it to be installed/registered.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How can I disable the output of the domain name after a getent request?

I use an iPlanet DS 4.13 to resolve the hostnames to IP-adresses in my company network. I have several scipts in use which use the getent command to resolve name to IP, but if I do a 'getent hosts hostname' I get an output like this:
123.123.123.123 hostname.domainname
How can I disable the output of the domainname? I just want to get back the IP-adress and the hostname?!
Help, please?!

The enrty in Ur DS for name to ip resolution might
have been given in the format "hostname.domainname" for the hostname.so if U remove the domainname it would resolve to the host name only.Check the attribute field in Ur directory server where U've entered the hostname.

Is it Possible to display the output of the ALV list as POP-UP

Hi Experts,
                 Is it Possible to display the output of the ALV list as POP-UP, if yes then provide some ideas on it.
thanking in advance,
Samad.

Hi samad, it is possible to display alv list as pop-up by using the FM " REUSE_ALV_POPUP_TO_SELECT"
try this sample code
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
      EXPORTING
   I_TITLE                       = P1_TITLE
       I_SELECTION                   = 'X'
       I_ZEBRA                       = 'X'
I_CHECKBOX_FIELDNAME          =
I_LINEMARK_FIELDNAME          =
I_SCROLL_TO_SEL_LINE          = 'X'
        I_TABNAME                     = 'T_VBAP'
       I_STRUCTURE_NAME              = 'T_VBAP'
       IT_FIELDCAT                   = T_FCAT2
       I_CALLBACK_PROGRAM            = 'ZTEST_ALV_POPUP'
   IMPORTING
       ES_SELFIELD                   = I_SELFIELD
       E_EXIT                        = W_EXIT
      TABLES
        T_OUTTAB                      = T_VBAP.
i think it will solve your problem
Regards,
Vijay

How to get the output of the Send Separate Remittance Advices in XML in R12

Hi All,
I have a requirement where we want the output of the standard report 'Send Separate Remittance Advices' to come in XML, currently its coming in PDF format.
Can you please help?
Thanks,
Dilip
Edited by: 990784 on Mar 12, 2013 2:57 PM

Refer these links
http://www.sap-img.com/bc037.htm
http://www.members.tripod.com/abap4/Save_Report_Output_to_a_PDF_File.html
CONVERT_ABAPSPOOLJOB_2_PDF FM convert abap spool output to PDF

To get the output in the chart for a single selection

Hi all,
I used a query to get the output of the table, and for the same query i have created a view to get the result in the chart.
to get the output of the table for a particular region i have created an input field and added value help to it. When i selected one particular region, i will be getting the data, in the table. But when i select a particular row in the table i need to get the data of that particular row only in the chart. (which i am getting)
But when i select multiple regions at a time, then i am facing the issue. I get result of multiple regions data(at a time two rows are displayed in the chart) in the chart. where in i want to get data only for one region (only one row needs to get selected at a time) to get the result.
Can any one throw a light of what needs to be done here.
Thanks,
Rani

Hi Rani,
I am not sure if I understand your question exactly, but it sounds like you need to set the selection mode for your table to "Single". If you do that the user will only have the possibility of selecting one row at a time in the table; they will not be able to select multiple rows.
You make that setting in the Configure Element panel for the table.
I hope this suggestions helps.
Margaret

How to send the output of the 1st BPEL process as a input to 2nd BPEL Proce

Hi,
I am working on OBPM 11G and my requirement is like below,
From Mediator we need to call two different BPEL process. 1st one is Synchronous one and second one will be a one way interface. We need to call a java call out from Mediator and then give the output to the first BPEL process. The output from the first BPEL process has to be given to the second BPEL process with a filter condition.
However we have achieved to call Java callout as well as call to two different BPEL process but facing issues in sending the output of the first BPEL process as a part of input to the second BPEL process.
Any help on this would be appreciated.
Bibhu

Hi,
Why do you need the third step, if the second step is a Numeric Limit Test step type, you can setup the limits of this step for your required limits of 11V and 12V. Your result is returned from your VI to Step.Results.Numeric which will be evaluated in the Status Expression giving you a Pass / Fail status.
Look at the example TestStand\examples\demo\..\Computer Motherboard Test\computer.seq
But to answer your reoriginal question, some additional information is required.
What are your inputs and outputs assigned to in TestStand, do you use the Step properties, Locals, FileGlobals?
Regards
Ray Farmer
Regards
Ray Farmer

Read the output of the iseries CL Program from Java

Similar Messages

Maybe you are looking for