Read the trim in and outs from Lightroom 4

Hi guys
I may want to use the lightroom 4 for organizing my videos, and I think it is nice to drag and drop from the grid view in LR to Premiere.
Though when I set an in and out point in Lightroom the Premiere (or Bridge) will not read these settings and just use the full clip.
Any way to get this to work without the need to export the clips first?
All the best
Morten Hilmer

Welcome to the forum.
There is no way, that I know of, to transfer In & Out Points from any other program, to PrPro. If there is, and someone shares it, then we will both learn something new.
PrPro is a non-destructive editor, so it only reads data from the original files, and then writes instructions on how to use/process that data. It does not contain any of the original Source Files.
Good luck,
Hunt

Similar Messages

How do I read the camera model and manufacturer from IMAQ in LabVIEW?

Hello All,
I have a machine vision application for automated test. I am required to save the image for each test for quality purposes. Since LabVIEW interfaces the CameraLink camera thru the IMAQ driver, various cameras can be used without changing the LabVIEW application. I need to store the basic configuration information, including camera model and manufacturer, with the image. I am able to read some parameters from IMAQ (like bit allocation and shutter speed) using the Read Attribute VI, but unable to read model and manufacturer.
Does anyone know how to read camera make/model from IMAQ in LabVIEW?

With this VI, any camera attribute that you can see and set in MAX, you should be able to see and set in LabVIEW. These are attributes that are defined in you camera file. Since Model/Make is not an "attribute" that you necessarily set, it is not included in your attributes tab in MAX.
If your camera file included a model attribute, then it would show up in MAX under attributes and you would be able to read it using the above-mentioned VI. The only thing I can suggest is perhaps use some File I/O instead of IMAQ VI's and read your camera file, if the ones you have are consistent in structure.
Hope this helps!
Tejinder Gill
National Instruments
Applications Engineer
Visit ni.com/gettingstarted for step-by-step help in setting up your system.

Have the same problem tried the signing in and out, rebooting, uninstalling and back again nothing is working, on 4th download of creative cloud still coming up with lightroom 5 after signing in anf out, also signing out dowloading and signing in, spent 2

have the same problem tried the signing in and out, rebooting, uninstalling and back again nothing is working, on 4th download of creative cloud still coming up with lightroom 5 after signing in anf out, also signing out dowloading and signing in, spent 2 days on this, just cannot spend days on trying tricks and hacks

I am getting so mad because I cant even sign out OR quit! They are both grayed out. I have the spinning blue wheel in my apps and am trying to fix that but none of the solutions are working.

Would Like to Get Report of Daily Emails In and Out from Members to a DL Exchange version : 2007 I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity is it possible ?

Would Like to Get Report of Daily Emails In and Out from Members to a DL
Exchange version : 2007
I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity
is it possible ?

Well, distribution groups don't really have a concept of "in" or "out". They only serve to distribute messages sent to them -- unless you're asking to know who was a member of the distribution group at the time a message was sent to the DL.
Message tracking logs hold the information you want, though. You'd have to look for EXPAND events that reference the distribution group and take the sender's e-mail address from that event. If the DL is a simple one that's not a member of any other groups
you could also look for RECEIVE events sent to the e-mail address of the group and get the sender's name from that event.
You can use Powershell extract the rows of data from the logs, but you'll have to write the code to get the data out of those rows and into a format you want. Perhaps LogParser could be useful in place of Powershell?
--- Rich Matheisen MCSE&I, Exchange MVP

How do I keep iMessage from going to the upper right and out of sight?

Imessage in Mavericks at random, on sleep, and when minimized, goes to upper right on the screen and I cant get it back. Even Mission control can not access it. I have close iMessage and restart. How do I keep it from going to the upper right and out of sight?

Hi,
I think a Screen Shot will help.
Use the CMD+shift+4 and then decribe around the area when you see the cross hairs.
To Post here use the Camera icon in the reply screen and then select/navigate to the Screen Shot (normally on your Desktop) and select it.
Then use the Insert Image button.
I don't use Sleep so I can't speak to that.
Minimise should put it in the DOCK.
Do you mean coming out of Minimise ?
Actually where is your DOCK (mine is at the bottom and I nearly forgot other people have it in different places)
If it is on the right is the Finder icon top of the icons ?
If the windows of an App are minimised then it does not appear in Mission Control (some of this is mixed with normal behaviour).
9:56 pm Tuesday; May 20, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Sample rate off the audio input and out devices do not match - what to do?

This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
Sample rate off the audio input and out devices do not match
and am asked to do this:
Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
I am trying to record from LineIn.
When running on a M-Audio sound card I don't face any problems.
HP 8560W, sound card IDT/High definition audio Codec
Any suggestions?
Knud
Copenhagen

You're sure you have set BOTH the input and output settings to 44.1 16 bit?
Which version of Windows are you running? There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard. Especially, you need to ensure that all "Windows Sounds" are turned OFF.

In and out from FCP brings entire source file into audio project

In FCP I have created in and out in the Viewer from a source clip, done an overwrite edit into the timeline. When I "send to" Sound Track Pro from Final Cut Pro from the timeline, Sound Track Pro opens with markers at the beginning and end of the audio track. The markers are where the in and out points are in the timeline in Final Cut Pro. However, if I scroll left and right, the entire source clip is in Sound Track Pro, not just the in and out from the affiliated clip in the timeline. How can I make only the audio from between the in and out on the timeline only come over into Soundtrack Pro as opposed to the entire source clip? Is there a setting somewhere?

I'm not having that problem, exactly but something similar. I find that a multitrack project sent to STP from FCP opens find, but when I open an individual file in the waveform, I don't get just the part of the clip I had in FCP (and had in the multitrack), but rather the whole clip before I made in and out points.
Is anyone else having problems like we're having?

Can I send Edited Photos and Video from Lightroom 5 to Premiere 11?

I am new to Lightroom 5 and love the product. Can I export edited Photos and Video from Lightroom to Premiere Elements 11? I need more flexibility than Lightroom offfers. I want to mix Photos then Videos with different music files and create a DVD. Thank You...Rory...

Also, can I load the Lightroom itself onto an external hard drive and keep all my images off my laptop? If I edit them, do the edits remain on my laptop regardless of where the originals reside. I think that's the issue that I'm running into with Aperture: edits stay on my laptop even though originals are on an external HD.
Your photos can be on any hard disk, internal or external or network. If they are stored on an external hard disk, then when you import them into Lightroom, you select the ADD option and the photo will remain on your external hard disk. The edits are stored in your Lightroom catalog (as opposed to "remain on my laptop"). Once you import photos into Lightroom, you no longer want to manage them (move, copy, delete) using your operating system. You do all photo management in Lightroom.
If you transfer the photos properly, your edits, cropping, metadata, etc. will transfer to Lightroom, but I will leave the details to some expert on Aperture.
If I could offer some advice, I don't think you want to just transfer SOME of your photos to Lightroom. In my opinion, you want ALL of your photos managed by Lightroom, and not some in application 1 and some in application 2. This makes your life much easier when trying to find your photos, you don't have to think "Is this photo in Lightroom or is this in Aperture?" (Note: this doesn't mean you have to import all the photos from Aperture into Lightroom in one HUGE operation; you can certainly do the importing in manageable sized groups)

My white macbook screen only works shortly when booting and when adjusting the brightness (turning it all the way down and up from there) and only stays on for seconds. any idea what to do?

Hi. I'm having quite an issue here. My macbook screen is only lid when i boot and when i adjust the brightness of the screen (going all the way down and up from there). either way it goes black again after a few seconds. External monitor works though.
Any ideas on how to solve this?
Lasse

I buy the dirty theory as well. plug and unplug a whole bunch of times - you may be able to dislodge whatever is causing the issue. Also - make sure the plug is fully seated - (some of the pad jacks are vert tight, and you really have to work them in). I gather you are out of warrenty? Blow in the hole.
last resotr - take a toothpick, dip the end in fingernail polish, get rid of the xs, then very very gently, insert the pick and try to rub the contacts. very gently as you do not want to bend them.

Can someone pls. Tell me how long it would take to have the iPad up and running from removing the plastic on the box?

Can someone pls. Tell me how long it would take to have the iPad up and running from removing the plastic on the box?

Upon applying for Telstra contract, salesman filled out all details & I was approved immed. He grabbed a new iPad 2 from the store's stock, all plastic wrapped, a white 32 gb. He then asked me if I needed to go and do some shopping as he had mucked something up and had to redo application. Everything had been completed and approved on screen, so I wasn't sure why he had asked me to come back in half an hour. I did so, and upon arriving back he was standing at the desk, iPad in hand together with receipt and box, no evidence of shrink wrap. As I already had bought a red cover, he basically grabbed that and slipped the iPad straight into it, without really asking me, and said, all ready to go. Was a bit surprised but accepted that. Did not see it being unwrapped, sim inserted or anything. Thought it to be odd, and without any further advice, was handed bag, box and receipt. Got home, thought it looked a bit fingerprinty, then wondered why it was basically set up ready to go. He knew I was a gadget freak, owning 25 wifi related devices, but had never bought apple products so he said I'd have no problems. There was virtually no set up to go through except for asking if I had an apple ID which I didn't so I created that and away I went. I was looking through the settings a bit later and noticed the ITunes said to sync back with WILLS-MSI when it was available. WILLS is the name of the store. There was a 32 gb white iPad 2 as a display model and now I am seriously wondering if he has taken that off the shelf and given to me. I have never in my life bought a display model and never would. From my description do you think I may be right? ( even the silver back looked 'not quite new').
OPINIONS appreciated, is there anyway of checking to see if a reset has been done as I am not at all happy & will be going straight to store manager on opening of store.

FCE4.0.1 won't open when the App Icon is clicked. I've checked all Ext HD (verified prefs)- have trashed the FCE App and reinstalled from FCE discs, have downloaded the Plug In. I clicked on the FCE icon, the windows that says :registered to...and then l

FCE 4.0.1 won't open when I click the icon in the Dock or in the Applications icon of FCE. It had been working well but I had trouble when I trashed the reference Scratch disk to a project and I was asked to get it back. I checked all my drives through verify in Disk Utility and a couple needed repair - eventually were given the OK. I then Shut Down and rebooted, I then trashed the FCE App and reinstalled from the Install discs and , finally, I tried opening a FCE project. None of these caused the FCE App to open with Browser, Viewer, Canvas,. Time Line. All that happens is the the first FCE window, the one that says FCE registered to...and the other that says loading AE Effects, Video Effects does show but then nothing except my Desktop with it's various folders and files I also downloaded the Plug In Tom Wolsky suggested to a recent query.
All I can think of is to backup everything to HDs and take this iMac in for a service.It is only six months old - I reckon it will be poor driving by it's proud but unskilled driver!
James Bowman
New Zealand

Don't panic . . . . . yet!
You may not have trashed FCE properly.
Deleting the application icon is useless as there are a number of files hidden elsewhere which may be corrupt.
Download this free app to uninstall FCE completely and then reinstall it.
FCS Remover - Uninstall Final Cut Studio, Final Cut Pro, Motion, Compressor, Soundtrack Pro, Color, DVD Studio Pro, LiveType, Cinema Tools
I know it is called FCS Remover but it also works for FCE.

I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next

I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next time is launches. I get the same message the next and every subsequent time it launches so I can't launch LR at all now.
I get that the preview file got corrupted somehow. Is there some way to fix this problem without building a new catalog?

Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You need to delete that folder and then start Lightroom again. Lightroom will generate a new previews folder.

How to read the data file and write into the same file without a temp table

Hi,
I have a requirement as below:
We are running lockbox process for several business, but for a few businesses we have requirement where in we receive a flat file in different format other than how the transmission format is defined.
This is a 10.7 to 11.10 migration. In 10.7 the users are using a custom table into which they are first loading the raw data and writing a pl/sql validation on that and loading it into a new flat file and then running the lockbox process.
But in 11.10 we want to restrict using temp table how can we achieve this.
Can we read the file first and then do validations accordingly and then write to the same file and process the lockbox.
Any inputs are highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

Hello Gurus,
Let me tell you about my requirement clearly with an example.
Problem:
i am receiving a dat file from bank in below format
105A371273020563007 07030415509174REF3178503 001367423860020015E129045
in this detail 1 record starting from 38th character to next 15 characters is merchant reference number
REF3178503 --- REF denotes it as Sales Order
ACC denotes it as Customer No
INV denotes it as Transaction Number
based on this 15 characters......my validation comes.
If i see REF i need to pick that complete record and then fill that record with the SO details as per my system and then submit the file for lockbox processing.
In 10.7 they created a temporary table into which they are loading the data using a control file....once the data is loaded into the temporary table then they are doing a validation and updating the record exactly as required and then creating one another file and then submitting the file for lockbox processing.
Where as in 11.10 they want to bypass these temporary tables and writing it into a different file.
Can this be handled by writing a pl/sql procedure ??
My findings:
May be i am wrong.......but i think .......if we first get the data into ar_payments_interface_all table and then do the validations and then complete the lockbox process may help.
Any suggestions from Oracle GURUS is highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

Drag and drop from Lightroom into Premiere doesn't work in Windows

I recently switched from OSX to Windows and noticed that in Windows, I'm unable to drag and drop from LIghtroom into Premiere. In OSX, it worked fine.
I do this a lot because it's a time saver. I basically use lightroom to find the photo or video clip I need for my editing project and then just drag in right on to the Premiere timeline. Now I have to do the extra step in Lightroom of "show in explorer", then drag the file from explorer to Premiere. Not really a big deal but just curious why it works in OSX and not Windows.
I'm running latest Windows 8.1, Lightroom 5.4, Camera Raw 8.4, and Premiere Pro CC 7.2.2 (33)
-Pete

Hi Pete,
You can obtain scripts here:
http://www.robcole.com/Rob/ProductsAndServices/MiscLrPlugins#MiscScripts
You'll have to edit lua code to adapt for Premiere. Not that hard really (e.g. clone, then change the script name and path to executable..), but may be too intimidating for some folks. If you are one of those folks, go for the plugin instead - it's usable via GUI - no lua code - can probably accomplish the same thing.
http://www.robcole.com/Rob/ProductsAndServices/OpenInWhateverLrPlugin
Let me know (outside the forum please) if problems - thanks,
Rob

How to make iTunes read the song's name/singer from the file's name itself?

Hi everyone,
So I have this file with songs from everywhere. I spent quite some time now to make sure that the structure of each file's name is as such : "Singer - Song name", hoping that everything would be read by iTunes accordingly. However, either iTunes read it well, or it didn't read it at all ("Singer - Song name" appearing in Title alone), or iTunes read the "media" of the file (ie. what the guy I downloaded it from wrote for it in the Preferences, which usually is in capital letters or with a bunch of weird underscores). As I'm OCD and need everything to be neat, I'm highly tensed right now. I really want everything to be neat and clear!
So, how do I make sure that iTunes reads the files' names such that it knows the structure is "Singer - Song name"? Thanks.

iTunes doesn't use file names to determine how music appears in your library, Rather, it uses metadata that is split between:
data elements that are embedded within the media files
data elements that are included in the entries in the iTunes database
No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes. Using your example:
the value of the track number element is 1
the value of the artist element is "Elvis Presley"
the value of the song name element is "Blue Suede Shoes"
Depending on how you configure iTunes then the file name is either:
completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
the file is in a folder called "Elvis Presley" (the name of the album)
that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works. There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step. However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

Read the trim in and outs from Lightroom 4

Similar Messages

Maybe you are looking for