READ This if you have a Yahoo email access issues on iPhone

It's just (10:53) been confirmed to me over the phone with 02 iPhone support that there is an email server down at Yahoo which is affecting iPhone email access for accounts set up on your iPhone with the Add Account - Yahoo Mail wizard.
There is NO estimation for a fix time, but support advised you to access your email via the safari browser (if you are mobile) and web access during this down time. Just go to http://new.m.yahoo.com
I hope this helps
Follow me on twitter and I'll post updates as I get them:
twitter.com/darrenaclarke

Thanks very much indeed for this, daccad. Would you mind if I pasted what you've written in the appropriate thread on the O2 forum?

Similar Messages

CMSS can cause for weird results. Please read this if you have surround issues

I'm a musician who frequently uses the Audio creation mode because this is the environment most optimal for creating music. For some time now, I've facing a certain problem where today, I finally found the solution about.
my problem
The problem I was having, is that some applications (they're optimised for stereo) played sound on my center speaker differently than those who use the windows 7 drivers. What happened in a nutshell, is that when I play sound in flash, the center speaker volume is about 3 times as loud as all the other speakers. Although this gives a nice and clear sound for presentations, this can be a pain when you want to listen to music.
my setup
For me, this is a bit awkward, because I have a big room where my speakers are positioned for my TV. My computer is next to my tv, but my center speaker is not in front of my pc monitor, but rather in front of my tv. Due to this, the right ear gets way more sound than my left one. Strangely enough, it weren't all the applications that had trouble with this. My music player plays everything equally throughout my speakers.
the mixer
The creative mixer (startup console) has several ways of tweaking this. Like assigning what channels to play if sound gets played through L/R, and their individual volume bars. You can guess it maybe. Changing these settings affected both applications differently. I could use the sliders to fix one, and then mess up the other. So when I went through all my settings I couldn't find what causes this.
CMSS is the fault here
I went reading this forum, and came to this post: http://forums.creative.com/t5/Sound-Blaster/How-to-enable-sound-for-my-center-rear-and-side-speakers-using/td-p/52 What gives, this option is not available when you are in Audiocreation mode. So it shouldn't affect my sound right? WRONG!
the problem
Even though you can't tweak the settings during audio creation mode, the settings are still in affect. So you have to switch to entertainment mode to access the CMSS-3D. I went there, and I had stereo enhancing surround enabled. When I changed that, it solved my problem. Since during audio creation, I mainly use stereo applications, I do not need surround enhancement.
my setup now
I turned it off, and as suspected, windows only parses sound to the left and right, not the other channels, even in audio creation mode. In the mixer, I have enabled output to all 7 channels I have for L/R output, and now the sound gets balanced to all my speakers. True, I get stereo sound over all the speakers, but when I want to use surround, I switch to the entertainment mode anyway.
Could a mod sticky this? I think its worth to have this stickied.

So my touchpad wasn't working and I have an HP dv6-6135dx. It started being messed up shortly after I took my PC apart to upgrade the screen. Sometimes it worked perfectly, sometimes it was completely unresponsive, sometimes the ring around the touchpad was lit, other times it wasn't etc.... It got worse and worse to the point where the touch pad almost never worked.
I followed this guide, and it didn't fix the problem; however, this got me thinking, and I pulled the keyboard out and reseated the touchpad cable where it connects right under there. BAM works perfectly. THANK YOU so much for this post, for some reason I didn't think to reseat the cable... I must have not plugged it back in completely when I took my laptop apart. You can find the service manual for the dv6t here Its in the first post

HP pavilion dv6 touchpad stopped working (read this if you have dropped your computer)!

Hello, this is not a question it is advice for people having touchpad issues with their dv6 (I've noticed a quite a few posts). My touchpad suddenly completely stopped working one day (didn't respond to anything that I did).
Most of the forums I've been to (actually, all of them... and they were many) ask you to try reinstalling the driver. However, if you did not recently uprage your OS or make any such major changes this is not likely to be the issue.
Try going to device manager. If your touchpad is not showing up under the mouse and pointer devices section (it should say Synaptics something or other) then it means that either something is broken OR your touchpad came unseeded.
For me, it was the second option (I drop my laptop... occasionally). The cable for the touchpad is held in place by a little plastic lever-like clamp. It can easily become loose, so try this out before taking your computer into a repair shop (and loosing it for weeks, not to mention the price if you're not under warranty!)
Three easy steps:
1) take the removable bottom cover off (that little plastic bit in the center where your hard drive is). For my model (6145dx), it just snaps off (with a flathead screw driver or other tool for leverage). You might have to unsrew a few things, but it should be easy.
2) Take out the hard drive (held in place by 4 screws in most cases). You do not need to disconnect the cables leading to the hard drive! Just pull it out and lay it off to the side.
3) Toward the very front of your computer (right under where your hard drive was, and where the touchpad is on the top cover) you will see the ribbon cables coming from your keyboard, touchpad, etc. Give them a little wiggle (just pull the plastic tabs that stick up. If one of them moves, then you need to re-clamp it! Push the cable all the way in and push down the lever.
Super easy! Should solve all your problems!

So my touchpad wasn't working and I have an HP dv6-6135dx. It started being messed up shortly after I took my PC apart to upgrade the screen. Sometimes it worked perfectly, sometimes it was completely unresponsive, sometimes the ring around the touchpad was lit, other times it wasn't etc.... It got worse and worse to the point where the touch pad almost never worked.
I followed this guide, and it didn't fix the problem; however, this got me thinking, and I pulled the keyboard out and reseated the touchpad cable where it connects right under there. BAM works perfectly. THANK YOU so much for this post, for some reason I didn't think to reseat the cable... I must have not plugged it back in completely when I took my laptop apart. You can find the service manual for the dv6t here Its in the first post

Read this if you have the Looping Audio issue...

I was having this problem and it was driving me nuts. It would do it randomly everytime I used iTunes. I searched around the web but could not find anything related to this issue except for these forums.
What fixed it for me -
Go into your Sound preferences and look at the Output tab. Is the balance centered? Mine wasn't. It was moved a few notches to the left. This problem has been occuring for quite awhile where the balance will move by itself! I moved it to the center and have NOT had a single problem with the looping audio anymore.
Try it! Let me know if it works! =)

I had same problem not with XP but with Windows 7 beta. I posted online and a lot of people said Realtek this and Realtek that, it didn't work for me. I finally tried installing Bootcamp 2.1 and voila it worked. While it was installing drivers, I noticed bootcamp saying "Removing Realtek audio ... " then "Installing SigmaTel audio ... " few seconds later i started hearing all the bells and whistles of Windows 7. Woohoo!
I guess Realtek works for some people with various configurations but for me it was Siggy.

I have a yahoo email account on my iphone 4s and the server keeps failing? pls help

My rocketmail account will sometimes work and sometimes not.
This has been happening for a month or so? I have tried deleting the account and reloading it on, when I do that it works fine for a while then will error (connection to the server failed).
I can send emails fine, the issue seems to be trying to recieve? I have not changed any settings and it had been working fine for a nearly a year now!
Any help would be mauch appriciated and given a small round of applause.
Jay

Yahoo mail servers are famous for failing regularly. If it works at times and doesn't and settings have not been changed, I would guess it is because of this.

TS3899 I have a yahoo email account setup on my iPad & iPhone. The new mail is never marked as unread when downloaded to my iPad or iPhone. Is there anyway to fix this?

I have a yahoo email account setup on my iPad & iPhone. The new mail is never marked as unread when downloaded to my iPad or iPhone. Is there anyway to fix this?

Hey there Fabian,
If I understand correctly you are going to Settings > Mail, Contacts, and Calendars > Add Account but that last option is not usable because it is gray. In testing this for you, I was able to reproduce this by enabling Restrictions and denying Account Changes. You can configure that with this article:
About Restrictions (parental controls) on iPhone, iPad, and iPod touch
Thank you for using Apple Support Communities.
Regards,
Sterling

Why have my yahoo emails suddenly started to fail to open yet the timer icon keeps spinning?

Why have my yahoo emails suddenly started to fail to open? Up until last week, no problems, now they appearing the inbox, but, I can't open to read them, yet the timer icon continues to spin!

Hi jeanmcdiarmid,
Thanks for visiting Apple Support Communities.
See this article for some troubleshooting steps that you can try on an iOS device or Mac:
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
All the best,
Jeremy

I changed my ID due to an email accessibility issue and I lost access to all my purchased music for the last few years. Been browsing through the support area and it seems like everyone is saying I will have to rebuy everything. Is this really true?

I changed my ID due to an email accessibility issue and I lost access to all my purchased music for the last few years. Been browsing through the support area and it seems like everyone is saying I will have to rebuy everything. Is this really true?
Apple has to be more user friendly than to let something like this happen, right?

Did you change the ID, or did you create a new Apple ID? If you had simply changed the ID then what I suggested above should work as the ID itself is the same (even though the name of the ID - the address - has changed).
However if you created a new ID, logged in with that, and purchased items on it, then you have two separate IDs each with purchased associated with them. You say that you can't log in to the original account with the 'alternate' email - have you tried logging in with the original email address? It doesn't matter if it doesn't actually work to receive mail, as far as logging in is concerned it's just a text string.

I have a yahoo email address that shows up on the icon on my iPad. It is updating correctly but if I try to compose an email it doesn't know my email contacts. Anyone?

I have a yahoo email account that shows up on my iPad icon and seems to be updating my emails accurately but when I compose an email it doesn't know my yahoo contacts. In the settings it does not show a contact default line. Anyone?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Read this if you can't hear callers or voicemail o...

If you can no longer hear callers, cannot hear your voicemail, and are tearing your hair out trying to get any help from the obvious sources (your service provider, Nokia, your local store) - do not panic.
Call 121, as if you are making a vm call. While it is connecting, adjust the volume control button on the right of the phone. You will find that this volume control button operates on a 1-10 scale and is completely different from the one that is normally adjustable from the main screen, which operates on a 1-30 scale. Hopefully you will start to hear the recorded voice and all will be well.
This is not mentioned anywhere in the handbook or any of the online resources. I eventually found a clue via a different help site - but couldn't find where the 2nd volume control was. Thank goodness I eventually stumbled upon it by accident.
I know I am not the only one to have lost connection with a caller half-way through a conversation. It must be a design fault of some sort. I am just relieved that I did not follow the Nokia diagnostics advice to reset my phone to factory settings (after backing up etc etc), or pay out vast ££s for the privilege of sending off my phone for a non-existent repair.
I am not techy - but I am posting this in the hope that it will save others the frustration, expense and time I have wasted over the past 3 days trying to get any sense out of Vodafone and Nokia. (I am sorry if that breaches some form of discussion board protocol - but it is a fact.)
If anyone from Nokia is reading this will you PLEASE update your handbooks to include this information, and take account of it within your online diagnostics page, which told me to restore factory settings. (Fortunately I have no idea how to backup data on my phone, and the advice didn't tell me either.)
If anyone from Vodafone is reading this, will you PLEASE train your sales staff and helpdesk staff to understand this problem.
Feeling calmer now ... off to make a large mug of coffee.

This is normal an also the same with other phone brands and OS. Even on android and IOS the call volume is different from the general volume of the phone. If you have a non-lumia nokia phone, it is also the same.

Failed to send email. failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly.

I get the message listed above when I try to email pics. It asked me to set up an email account. I chose gmail. It asked for a password. I'm assuming it was asking for my email password. And yes I may have typed it in wrong, but how do I "please make sure you have entered the email account and password correctly" ??? I can't find out how to get back to that point?

Have you checked your Gmail in-box? See if this helps:
https://forums.adobe.com/thread/1642613

I try to get my first access and add a book to my library but all it says is E_ADEPT_CORE_USER_NOT_ACTIVATED...and it keeps telling me this although i have the right email and the right password...i am using a tolino..i just got it so it acnt be an update

i try to get my first access and add a book to my library but all it says is E_ADEPT_CORE_USER_NOT_ACTIVATED...and it keeps telling me this although i have the right email and the right password...i am using a tolino..i just got it so it acnt be an update problem

Eva:
Yes, updated to firmware version 1.28. That was the 1st thing I did.
Then I authorized my iRiver. ADE had been installed way before I got
iRiver. It has a couple library books there. I hoped to read them on
iRiver. After I read this thread and another one at
http://www.mobileread.com/forums/showthread.php?p=1832825, I used
CtrlShiftE and CtrlShiftD to de-authorize both my computer and the
device. Then authorized both and had to download books again, deleted
previously copied books from iRiver and copied fresh copies. No luck.
Don't know what to do next. Emailed iRiver.

Post Moved How-Do-You-Setup-BT-Yahoo-email-Accoun...

Moved http://community.bt.com/t5/Other-BB-Queries/How-Do-You-Setup-BT-Yahoo-email-Accounts-on-a-Windws-8-O...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

My wife has a new Windows 8 laptop, and she uses the Thunderbird e-mail client, just like she did on the old laptop.
The setup is shown here.
Using Thunderbird e-mail client
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

HT4897 Can I have my yahoo email forward to iCloud account?

How can I have my yahoo emails forward to iCloud?

That would be a question for Yahoo to answer.

I have changed the email signature on my iPhone, when composing a new email the signature is there, however when I am replying to an email it is not, how can I make sure that the signature is at the end of every email I send?

I have changed the email signature on my iPhone, when composing a new email the signature is there, however when I am replying to an email it is not, how can I make sure that the signature is at the end of every email I send?

Yes I know what you mean about it cluttering the thread and for personal emails it is better without the signature. However this relates to sending business emails from an iPhone so I need the signature present on every email.
I can't find anything in Settings so I was hoping someone may have some knowledge/information/experience regarding this problem.

READ This if you have a Yahoo email access issues on iPhone

Similar Messages

Maybe you are looking for