READ this: MSI TV @nywhere Plus + Dscaler

My Pinnacle pctv pro has gone ( I suspect overheating).
Used Dscaler for tv (ecxelent picture, ultra fast channel switchig) and VDub for recording (Huffyuv lossless codec).
It was super card. On differnt forums I read:this card is good, this card is peace of ....., but I think that every card is good as long it has good software.
Dscaler pulls maximum of the card out. For me is one of the best programs ewer written. :biggthumbsup:for the author !!
So I decided to buy something cheap. I bought MSI TV @nywhere Plus about 4 monthes ago.
Installation go smooth, MSI TVR works without problems, but TV picture was, like I ecxpected, not even close Dscalers.
After many ours, managed to work it with Dscaler 4.1.15.
Settings: Card Asus 7131D
Tuner Philips TDA8275
For each channel choose right Format ( for me Pal-B) and frequency.
Picture is on channels with good reception like watching DVD, but channel switch is a little bit slow ( the card is not directly supported).
Note - Dscaler is just for watching, for recording is original Msi Tvr more than good.
I had problem to use Dscaler and Msi tvr together ( Msi tvr reports error - list index out of bounds), but i solved it -
send shortcut C:\Program Files\MSI\TV@Anywhere Plus\TVR\MSITVR.exe to desktop and run it from there.
Remember - dont ecxpect miracles with MSI TV @nywhere Plus but for this money ( 3 x cheaper then was my pctv pro), must say that MSI TV @nywhere Plus is ecxellent card.
Hope, that I helped anyone with this.
Intel P4 3.0 Ghz BOX, 1Mb, 800M
Albatron PX865PE pro
2 x 512MB Ram
Radeon 9600 XT 256MB
MSI TV @nywhere Plus
Technisat SKYStar 2
120 Gig HDD SATA WD, 40 GIG ST, 160 gig USB2.0
LITE-ON DVD-RW
Taxan 21"
Windows XP SP2
.

glad you're enjoying it! i don't use my TV@nywhere Plus much, apart from to use it to play my Nintendo GameCube, but i think its an all round better solution than the TV@nywhere Master it replaced (as well as being much cheaper too). however, once you go down the Digital TV route, you'll never go back to analogue TV again

Similar Messages

MSI TV@nywhere plus sound

I have the MSI TV@nywhere plus card v 1.0. The tv and radio work... but my left speaker does not work. I hear the radio but it is distorted. I have boston speakers ba635. Any help would be appreciated.. Thank you

check the audio lead from the TV@nywhere Plus is fully connected into the Line-In socket on your soundcard (or motherboard, if you have onboard sound)

MSI TV@nywhere plus Remote with Windows 7 64 bit

I have the TV@nywhere plus and Windows 7 64 bit. Everything works except the remote. I downloaded the latest drivers from the MSI site and I have the remote icon in the bottom right of the screen. However it does not work. If I click on it (the icon) and under settings it shows MediaCenter; I can not get it to recognize the MSI TV software. And the remote doesn't work in Media Center either. Any suggestions? Thanks.

Did you download the >> TV@nywhere series Remote Utility << or just the other drivers? If it doesn't work with the Vista utility then it's not going to work in W7 64 bit.

MSI TV @nywhere plus and Satellite?

Hello, new to this card, just bought it new in box, just wondering if it will work with dish and bev sats?
I don't see many options, though there is a freq scan for manual entry though what those would be who knows?
Thanks,
Diabolical :D

you need to connect your satellite receiver set-top box to the TV@nywhere Plus card using either the composite or S-Video inputs. then you'll use the set-top box to change channels, as the TV@nywhere Plus card can't do that

MSI TV @nywhere Plus - Scheduled Recording not working

I just installed TV Anywhere Plus on my new Windows 7 PC, and everything works fine, except for the "Scheduled Recording" button. Has anybody experienced that before? What could be the problem?

Quote from: blazing storm on 07-February-10, 04:51:17
What exactly happens when you click the button?
Do you have the latest drivers installed for your card?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=616
The problem was that when I click the button nothing happened. But now it does.
I installed the driver as on the website you gave me.
Seems that [probloem is solved with that.
Thanks

MSI Tv @nywhere Plus to FTA

I am trying to program this nice tv tuner with my FTA box. Does anyone know if you can do this? I hope you can.

Quote from: Bas on 04-October-07, 17:48:43
Stu, FTA (=Free to air) and that receiver is a Sat-receiver.
However, Stu is right, I would buy a Sat-FTA card and plug the dish directly into the computer.
It gives you way more options.
Yes, something like the TV@nywhere Satellite might be better for you

Msi TV @nywhere plus

Has anyone tried getting this card to work under Arch?
Im considering buying one but i want to do some research before i do.
MSIs specification sheets says there is a saa7131 chipset and the tda8275 tuner onboard, which afaik should work fine under linux.
well id love to hear some success stories and and not as successful ones too, would be good for the problems that might lie ahead

Quote from: blazing storm on 07-February-10, 04:51:17
What exactly happens when you click the button?
Do you have the latest drivers installed for your card?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=616
The problem was that when I click the button nothing happened. But now it does.
I installed the driver as on the website you gave me.
Seems that [probloem is solved with that.
Thanks

TV@nywhere Plus remote issue resolved!!!

I have been searching and reading many posts to fix my remote issue / not working problem. I have had a MSI TV@nywhere Plus TV tuner for like a year and the remote never worked. I don't know the exact model number of the tuner card. I know my driver for the TVR is 2.0.2.2. I have the software that has the PVR Plus. I had seen several posts that link the issue to running the Initervideo Cinema Manager which I ran and I still did have any luck. So I uninstalled Intervideo WinDVD (which I did and this did not resolve the issue either) I left this program uninstalled an I searched the CD for some info.
The CD I have has a version number on the bottom around the hole MSI_7131_V1.1.
I found a program called P3XRCtl.exe that has a icon of a remote in the path E:\PCI\TVUtility (this is on the CD). I copied this program to my desktop and then clicked on the icon. Guess what, it worked!!! All of the functions on the remote work. It seems as if when I installed the software that this remote software/utility did not get installed and does not run when the TVR program starts. So I then created a folder in my program files to place this exe file. The path I placed it is C:\Program Files\MSI\TV@Anywhere Utilities (I created the TV@Anywhere Utilities folder) The MSI folder now has 2 folders called TV@Anywhere Plus & TV@Anywhere Utilities. I still had a problem of the program not starting when I start the TVR program so I added the exe file to the Startup folder. To do this create a shortcut to the exe file and place this new shortcut in C:\Documents and Settings\All Users\Start Menu\Programs\Startup
This program will now start everytime the computer starts and the remote should work when the TVR program is started. I am running Win XP Pro...

This is wonderful I just solve my problem with the Remote Control, I Follow the suggestions from this people and my problem is fixed... now I can use it. Thank You very much

I need drivers for TV @nywhere Plus Remote Controller!

Hi, I'm really getting depressed because I'm searching for drivers for months. I have TV @nywhere Plus but I lost my CD long time ago and I didn't care because everything still worked fine but last year I reinstalled my XP and everything changed from that day. I found drivers online for the TV card but not for my remote controller (actually I found something like that in the official site but it's not working and it's not the same like from the CD). And I continued searching and searching and lost hopes, and my remote controller stopped working, I bought new today and I hoped to fix it but still I can't make it work because I don't have drivers. :(
So guys, can you just send me the same drivers from this CD because I know they are there and they could help me. I really hope you have that CD. I found info in this topic - TV@nywhere Plus remote issue solved! - and I need exactly this program - P3XRCtl.exe version 2.0 something like that. It's a blue icon. I can't download anywhere this thing online :(
You are my last hope to help me, I don't want to dissapoint my parents again. Thank you again
P.S I bought the same things years ago

Yes but the version is 3.0 and not 2.0 and when I install it and start it I see the icon working but my controller is not working. And on the app when I open the settings it says something like - hold the power button on remote controller and choose the app you want to start and there is a blank list (probably there should be TV anywhere programme and when u choose it to start working. And that's it. It's just useless and I don't know why, I am holding the button trying to make something installing uninstalling and it's the same thing.

MSI TV Tuners - Please Read This Topic First!

Welcome to the forum! If you are looking for help with your MSI TV tuner, this is a good place to start before posting. Look through the stickies below, and make good use of the Search function to see if your question has been answered already.
Can't find an answer? Then start a new topic of your own, don't just hijack someone elses. Give as much information as you can, look in the Suggestions on posting and getting better answers for advice.
Please bear in mind that this is a global forum, viewed by members from all over the world. Please make good use of the 'Location' field in your Profile, and please also state your TV signal type (eg PAL, NTSC) as well as source (aerial, cable, satellite). That should reduce chance of answers that are not really appropiate for your location.
MSI TV@nywhere Master PCI TV Tuner (MS8606)
MSI Product Support page - download drivers, manuals, software
MSI TV@nywhere MASTER PCI TV Tuner card FAQ
TV@nywhere Video OK, But sound loss after 40 sec (solved)
Vox USB Tuner
MSI Vox Box USB 2.0 TV Tuner FAQ
MSI Vox Power Supply...awesome!! PLEASE READ
Troubleshooting problems with hardware and MSIPVS
TV@nywhere Plus PCI
Problems with Windows Media Center
TV@nywhere Plus and Vista SP1
How to get audio from TV@nywhere Plus
TV@nywhere Plus remote issue solved!
TV@nywhere Plus - Vista Drivers required for remote control
TV@nywhere Plus and Windows 7
Theater 550PRO (PCI)
Theater 550PRO install issues
MegaSky 580 USB2
Mega Sky 580 and Windows Vista
Mega Sky 580 unavailable in MCE?
MSI MegaSky 580 Fix?
MegaSky 580 Installation Problems
Problems with MegaSky 580
New update for MegaSky 580
Weak reception from MegaSky, whats wrong?
Patches for PrestoPVR for MegaSky
DigiVOX USB2
DigiVOX and Windows XP x64 Edition
DigiVOX Mini II v3.0
DIGIVOX mini II V3.0 + Windows 7
Other useful topics
Windows XP Media Center Edition FAQ
Microsoft MPEG4 or DivX codec

I developed a program with php and mysql.in php file I am using applet tag to print out some informations.when I connected from client to the server.in that page I cant run applet.in client browser I have java plugin too.if I tried applets and also this print applet in my laptop it is working but if I put them into the server and if I connect from client applet isnt working problem is this.please someone help me

I am unable to add events to the calendar. The banner on the top of the calendar reads "no clendar" and the plus icon has dissapeared. How do I fix this?

I am unable to add events to the calendar. The banner on the top of the calendar reads "no calendar" and the plus icon has dissapeared. How do I fix this?

Its likely there but he pop up page isn't resizing properly.
Try a reset: Simulaneously hold down the On and Home buttons until the iPad shuts down. Ignore the off slider if it should appear. When shut down is complete, turn the iPad back on.

MSI tv@nywhere users plz read :)

lo guys, I'm sorry i have to ask such a newb question..altho i am kinda new at this...but can anyone tell me how they installed their Tv@nywhere with Windows XP? the drivers for me don't seem to work..when i install it...i get the windows xp error saying that it may not be compatible...i've tried continuing and the driver was installed but when i run the program...i can't get anything...:S plz help..i really want to run this on win xp...anything will be much appreciated...thanx a tonne in advance guys
-greetz

glad you're enjoying it! i don't use my TV@nywhere Plus much, apart from to use it to play my Nintendo GameCube, but i think its an all round better solution than the TV@nywhere Master it replaced (as well as being much cheaper too). however, once you go down the Digital TV route, you'll never go back to analogue TV again

MuseJSAssert: Error calling selector function:TypeError: Cannot read property 'msie' of undefined. Please help me in this.

MuseJSAssert: Error calling selector function:TypeError: Cannot read property 'msie' of undefined. Please help me in this.

Hi
Please check the following thread,
Re: MuseJSAssert: Error Calling Selector Function:[Object Error]
Do let me know if you have any question.

Problem with tv@nywhere plus on windows 8

hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?

I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.

TV@nywhere Plus - "Cannot init Direct show interface... (1001)" - Windows XP SP2

I just purchased a TV@nywhere Plus card, hoping to read video from a video camera.
Whenever I start the MSI video program - the program at the top of the MSI main panel interface (see the bottom of this page for a screenshot) - I get the following two errors one after another:
Cannot render audo renderer (5001)...
Cannot init Direct show interface... (1001)
Unfortunately, this means I can't read video from the card, so I'm stuck! Fixing the video error is critical, fixing the sound error isn't important (the video I'm importing is from security cameras, which don't have sound).
I've tried updating the directx drivers, but they seem to be the most recent?
I've tried updating the MSI drivers from the MSI site, but they seem to be the most recent?
Someone mentioned messing with codecs somewhere/somehow, but I don't understand how to do that.
I really need help. My only option at this point is to return the card and find another..
Thoughts?
Technical Details:
TV@nywhere Plus
NVIDIA GoForce 8400 GS, 512MB (using nv4_disp.dll v6.14.00.11.7516)
IBM ThinkCentre
Windows XP Professional SP2 (5.1, Build 2600)
Intel Pentium 4, 3.2GHz
1.5 GB RAM
DirectX 9.0c (4.09.000.0904)

I don't get errors using the program you suggested (or webcamxp, the program I was using), however, the video signal is black... no video going through to these apps.
Which is why I was testing with the MSI app, thinking if I could get it working there, it would work within my other apps.
I will try to refresh the video/audio drivers.
Quote from: Stu on 23-June-09, 01:32:15
Try AMCap, and see if you get the same errors there.
http://amcap.en.softonic.com/
Also, try updating your video card drivers, and audio drivers.

READ this: MSI TV @nywhere Plus + Dscaler

Similar Messages

Maybe you are looking for