Read / Unread Marks - why no controls??

I'm a recent convert to the Mac (happily), but miss the ability Outlook mail gives you to control whether messages are automatically marked as read, or remain unread, when previewing them in the preview pane. Is there no plug-in available to allow this control?
Thanks,

I don't know whether there is a plugin that does that, but there is a comprehensive list of plugins available for Mail here:
http://www.hawkwings.net/plugins.htm

Similar Messages

Is it possible to flag e-mails and/or right click an e-mail to mark as read/unread, etc. when using Microsoft Outlook Web Access in Firefox on a Mac?

Is it possible to flag e-mails and/or right click an e-mail to mark as read/unread, etc. when using Microsoft Outlook Web Access in Firefox on a Mac?
== This happened ==
Every time Firefox opened
== I've never been able to figure out how to do those things in Firefox.

When you use OWA in something other than IE, you're using OWA lite and no--it is not possible to do either in OWA lite (well, new Exchange stuff makes my answer a little less emphatic but still: pretty much no). Thanks Microsoft. But this guy made it possible to mark unread/read and select all/none:
http://david-burger.blogspot.com/2008/07/firefox-greasemonkey-outlook-web-access_19.html

Outlook 2010 shared mailbox marked as read/unread issue

Hi Outlook Pro's,
We've got a weird issue on a shared e-mail account in exchange. 2 users accessing the shared account currently experience this issue whereas another one works fine and we're trying to determine the source of the problem.
When browsing the shared e-mail account's inbox, and opening an e-mail, the e-mail isn't marked as read in the inbox. This is a problem as other users viewing the same e-mail account can't see whether the e-mail is being serviced.
However, if we categorize the e-mail, it is marked as read/unread instantly. Or if we switch to the users personal inbox and back again it changes the read/unread status.
User services has tried the following:-
1. Changed Reading Pane options for when the mail item is marked as read.
2. Enabled the reading pane addon for Outlook.
3. Repairing the OST (clearing the exchange cache)
3. Switching the effected user to another computer, it's almost like the problem follows their profile.
The e-mail account is shared between 5 users, only 2 of which are experiencing this problem.
Is there anything else we can try on the user end?
What should we investigate in Exchange?

Analysed first according to your description.
1. Changed Reading Pane options for when the mail item is marked as read. - no option problem
2. Enabled the reading pane addon for Outlook. - What's add-ins in your site?
3. Repairing the OST (clearing the exchange cache) - Not the problem for data file itself
4. Switching the effected user to another computer, it's almost like the problem follows their profile. - Not the problem related the shared mailbox
5. The e-mail account is shared between 5 users, only 2 of which are experiencing this problem - conflict with the result of Point 4, it looks the local profile still be the doubt..
At this point, please try to run Outlook.exe with safe mode on those two problematic computers and avoid any add-ins interrupt. You may also use the switch command-line /cleanviews to check the result as well.
On other hand, please double confirm if the problematic computers' connection status vs. none-issue machines'. Using the cable connection with the same network speed? RPC/MAPI or RPC over http? etc... Any difference might be the cause.
Tony Chen
TechNet Community Support

Detecting rows marked at table control

Hello Experts,
I need to display a message error when trying to delete operations in IW32.
For that purpose, I am validating the value of a field at user exit ZXBS1U01.
The problem is that I cant't know the rows I've marked in table control for deleting.
There is a table (LST), with the number of operations and a field FLG_MARK but this appears with an X (delete), after that user exit.
There is another structure ( RC27X ) with the index for deleting, but the problem is that it is not available for the last row at the user exit.
I tried to search for the table control, but I cant find it neither the rows I've marked at ZXBS1U01.
Can any one help me please ?
Thanks a lot,
Lilian.
CONSTANTS:
 c_loea(4) VALUE 'LOEA',
 c_valor(22) VALUE '(SAPLCOIH)CAUFVD-AUFNR',
 c_valor4(25) VALUE '(SAPLCODT)LST[]',
 c_valor5(25) VALUE '(SAPLCOVG)RC27X'.
FIELD-SYMBOLS:
 <fs_valor> TYPE caufvd-aufnr,
 <fs_valor4> TYPE STANDARD TABLE,
 <fs_valor5> TYPE rc27x.
DATA BEGIN OF t_lst OCCURS 0.
 INCLUDE STRUCTURE rclst.
DATA END OF t_lst.
IF sy-tcode = c_iw32 AND sy-ucomm = c_loea AND sy-dynnr = 3010.
ASSIGN (c_valor4) TO <fs_valor4>.
IF sy-subrc = 0.
 t_lst[] = <fs_valor4>[].
 ASSIGN (c_valor5) TO <fs_valor5>.
 IF sy-subrc = 0 AND <fs_valor5>-index_act IS NOT INITIAL.
 READ TABLE t_lst INDEX <fs_valor5>-index_act.
 IF sy-subrc = 0.
 validation *****

Did you tried Implicit enhancement? From ECC 6.0 version we have Implicit and Explicit, try to find any implicit enhancment after choosing delete operation and write the code in that.

Why no controls on My Mac Pro display for the 9/12 event?

Why no controls on My Mac Pro display for the 9/12 event? I thought it odd that I had no conrols for the event (later in the day) - Just something Apple was trying different. - It was frustrating that I could not pause it , and later, jump to the point where it crashed. (anybody else have that problem?) But later I had my wife look at it on her 24" iMac, and the controls were present and it worked fine. I thought it might be because I had turn off Java; I turned it on and tried it, still no fade in on mouse move controls. Anybody have an idea why? (Apple STILL needs to update the product list on this submit page This is ML 10.8)

After 3 more days, and a reboot, still no controls on THIS video. Everything else seems fine. Even the Apple movie trailers with the same type of "floating" controls work properly. Does anybody have a clue?

I have an email account on qou but all the incoming emails subject and body appear as question marks, why???

I have an email account on QOU (al-quds Open University) but all the incoming emails subject and body appear as question marks, why???

Try to set the Boolean pref gfx.font_rendering.directwrite.use_gdi_table_loading to false on the about:config page.
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"

Determine the read/unread status of a message in a users inbox

Is there any way to see the current status of a read/unread message attribute. The email is confidential and the user is not supposed to see it. The sender wants assurance that the email was not read. He wont accept a screen shot as the email could always
be marked as unread. I have tried MSMAPI but the attribute doesn't seem to be listed, though I cant determine the Hex code meaning. Thanks for any leads.

"read"
is just a flag on the message (PR_MESSAGE_FLAGS), it can be changed and it cannot guarantee you if the message was actually read. Confidential mail should be encrypted or IRM-protected, so you can blame the sender as much as the recipient.

PhotoshopCS6 file is not longer working, error message reads unreadable

PhotoshopCS6 file is not longer working, error message reads unreadable. PLEASE HELP!!!!!! I've spent so many hours, the copied that I do have are in JPEG. and PNG and they arnt as clear.

And what exactly? You have neitehr provided proper system info nor the exact error message nor told us anything about your documents. If you are referring to PSD files suddenly registering as damaged, you might wanna check the forum. This has been discussed quite a bit. and of course you might want to read some primer on the big Internet why people use versioning/ incremental saves and backups to avoid critical files being lost...
Mylenium

How can I sort my email by read/unread?

Is it possible to sort the email list by read/unread?

IF you are using webmail https://mail.verizon.com/webmail/driver?nimlet=showmessages&view=emails unread should be in BOLD , but I do not see any way to sort.
I use zohomail free version http://email.about.com/od/Zoho-Mail/fr/Zoho-Mail-Review-Free-Email-Service.htm to send and receive Verizon email and it includes an unread folder.
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

Does "read / unread status" work consistently with the current version of iPad os and Exchange?

I'm having issues with "read / unread" email status syncing successfully between iOS devices and Outlook/Exchange.
Reading an email on the iPad only marks the email as "read" on Outlook about 50% of the time, and vice versa.
Syncing "red flags" on emails is inconsistent as well.
I'm unsure if this is just a quirk with iPad / iOS, or if this is an issue my hosted Exchange provider needs to look into.
Does read/unread sync work consistently for the rest of you? Thanks.\
The iPad is on 6.01. Unsure what version of Exchange the provider is running.
Thanks

We run Exchange 2010 with Activesync and we don't notice any issues with our exchange setup. Either on iPhones or iPads.

What happened to the unread marks?

OK, I give up... what happened to the unread marks in the forums?
I can no longer tell what threads have new content.
I also notieced the "Mark All Read" link is gone (which makes sense since there are no unread marks any more).
Makes it rather difficult to keep up, even with the discussions I'm involved in.

Well I was just trying to troubleshoot this earlier, thought I had something up with Safari, until Firefox clued me in
Tuttle, does this mean users will be stuck confused between what threads are new and old until the future? I don't mean to pin you down to a specific time, but any guestimate on how long?
Thanks.

Hotmail read/unread messages

Hello all,
Very please my iphone can now cope with hotmail, but the fetching doesn't seem to deal with knowing which messages are read/unread in my main inbox, and messages I read on my iphone aren't marked as such when I log in via a web browsed (i.e. normally) to hotmail... any help?

Get an email service that offers free imap support, or upgrade to the paid hotmail to get imap support.

Apple Mail not syncing Inbox Status (Read/ Unread)

This is Ramya from Zoho Mail Technical Support team.
When a Zoho Mail account is configured as IMAP in Apple Mail client in Mac Mail clients, the emails are synced fine in all folders except Inbox.
When the emails in Inbox are marked as Read/ Unread in other devices, the emails are not marked as Read/ Unread in the Mac Mail client. The new emails that arrive in Inbox are getting retrieved in the mail client, but only the status of the emails in Inbox remain unchanged.
After analyzing the logs in detail, we see that Apple Mail is not issuing the IMAP STATUS command for Inbox folder alone.
To check if there is any issue, we tried configuring Yahoo, Dovecot email accounts in Mac Mail client and the result was the same for Yahoo and Dovecot accounts also.
Interestingly, when we configure a Gmail account as IMAP, Apple Mail issues the IMAP STATUS command and syncs the status of the emails in the Inbox folder also.
We have a lot of users who use Zoho Mail via IMAP in Apple Mail Client who face this issue and have raised it to us in our community forums, emails. You can have a look at the https://forums.zoho.com/topic/zoho-and-apple-mail-via-imap to find the issues reported by the user regarding Apple Mail IMAP sync.

Very interesting but if you want Apple to see it please use this link:
http://www.apple.com/feedback/
We are just fellow Apple users on these forums, but thank you for posting!

Syncing read/unread e-mail for a non-mobileme account

Hi
While mobileme accounts sync fine. My work account doesn't. So if I use Mail on my iPhone, I have to go through my e-mail twice. Every e-mail on the server is marked as unread so I have hundreds of e-mail waiting to be downloaded to my iPhone.
Is there a way to sync read/unread e-mail for a non-mobileme account?

The reason this is available with your MobileMe account is because your MM account is an IMAP account. An IMAP account is designed for this very thing - accessing an email account with more than one email client on different computers and/or devices keeping all server stored mailboxes for the account synchronized with the server automatically with each email client used to access the account.
The same is available with any IMAP account, and this is supported with an Exchange account accessed via ActiveSync with the iPhone's mail client.
Your work account must be a POP account, which isn't supported with a POP account. Although it is possible to access a POP account with more than one email client, a POP
account is designed to be accessed with a single email client only.

Problems with read/unread mail on IMAP server

[ Edited by Apple Discussions Moderator; Please start a new topic about your technical issue. ]
I'm having the strangest problem and I've yet to find a pattern or explanation for it. I retrieve all my mail from an IMAP server and store cached copies on my Mac. Sometimes after I've read a message, and Mail.app marks it as such, it will re-flag itself as unread after a number of minutes. Sometimes it's immediately, other times it's after several hours. It doesn't happen on all messages, just some, and seems to happen in at random in any of my IMAP folders. It's incredibly annoying. Has anyone else had this happen or do you know how to fix it? It doesn't seem to happen with other MUAs, just Mail.app. Thank you!

I brought this up with Apple and Mirapoint (the providers of our mail server infrastructure) a year and a half ago when I was running 10.3.4. The discussions ended up to a difference of opinion between the two companies concerning the IMAP spec. This has always been a issue with Mail.app ever since I can remember from back in the 10.0 days up until at least 10.4.4.
I will post the tail end of the discussion with the names removed to protect the innocent. I will admit that alot of this stuff is over my head. I also don't know how this applies to other mail servers. I don't think any other IMAP clients that I know of exhibit this read/unread state issue.
FROM APPLE:
Thanks for your patience on this escalation. A Mail.app engineer has reviewed the logs you sent in and determined that the Mirapoint server is returning the wrong response.
Specifically, in return to SELECT their server is returning:
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen NotJunk Junk Forwarded JunkRecorded)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen NotJunk Junk Forwarded JunkRecorded \*)]
* 11 EXISTS
* 0 RECENT
* OK [UIDVALIDITY 1057775569]
3 OK [READ-WRITE] Completed
They are using the PERMANENTFLAGS response for session-based IMAP flags, which unfortunately does not abide by the IMAP spec. The engineer has agreed that Mail.app could likely do a better job handling session-based flags but concurrently Mirapoint needs to rev their software to return the appropriate response as per the IMAP spec.
MIRAPOINT'S RESPONSE:
I went through the spec (RFC 2060) and found the following...
IMAP server can allow a client to create permanent flags that can be stored:
Under Section 2.3.2. Flags Message Attribute
A keyword is defined by the server implementation. Keywords do not begin with "\". Servers MAY permit the client to define new keywords in the mailbox (see the description of the PERMANENTFLAGS response code for more information).
Also,
Under Section 6.3.1. SELECT Command
If the client can not change the permanent state of one or more of the flags listed in the FLAGS untagged response, the server SHOULD send a PERMANENTFLAGS response code in an OK untagged response, listing the flags that the client can change permanently.
Also,
Under Section 7.1 Server Responses - Status Responses....
PERMANENTFLAGS Followed by a parenthesized list of flags, indicates which of the known flags that the client can change permanently. Any flags that are in the FLAGS untagged response, but not the PERMANENTFLAGS list, can not be set permanently. If the client attempts to STORE a flag that is not in the PERMANENTFLAGS list, the server will either reject it with a NO reply or store the state for the remainder of the current session only. The PERMANENTFLAGS list can also include the special flag \*, which indicates that it is possible to create new keywords by attempting to store those flags in the mailbox.
Now, referring to the earlier IMAP session (over telnet ) that I had you do:
. select inbox
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen NotJunk Junk JunkRecorded Forwarded)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen NotJunk Junk JunkRecorded Forwarded \*)]
* 12 EXISTS
* 2 RECENT
* OK [UNSEEN 11]
* OK [UIDVALIDITY 1056569562]
. OK [READ-WRITE] Completed
. fetch 1:* flags
* 1 FETCH (FLAGS (\Seen))
* 2 FETCH (FLAGS (\Seen NotJunk))
* 3 FETCH (FLAGS (\Answered \Seen NotJunk))
* 4 FETCH (FLAGS (\Answered \Seen Forwarded))
* 5 FETCH (FLAGS (\Seen))
* 6 FETCH (FLAGS (\Seen))
* 7 FETCH (FLAGS (\Seen))
* 8 FETCH (FLAGS (\Seen))
* 9 FETCH (FLAGS (\Seen))
* 10 FETCH (FLAGS (\Seen))
* 11 FETCH (FLAGS (\Recent))
* 12 FETCH (FLAGS (\Recent))
. OK Completed
As you can see above, "NotJunk", "Forwarded" are the PERMANENTFLAGS defined and stored by Mail.App client, not the session specific flags. According to the snippets that quoted above from the IMAP specs, I think Mirapoint is correct in its PERMANENTFLAGS response.

Read / Unread Marks - why no controls??

Similar Messages

Maybe you are looking for