Read Variable using DSP Test Integration Toolkit
Hi,
I am using LabVIEW DSP Integration tool kit to get some variable values from DSP code during run time. I am able to get symbol values if I am specifying symbol name as string input. I am expecting to read from LabVIEW code some global variable values, if i am giving variable name as string. I could not find any help over the same.
Any help to resolve the problem is highly appreciated.
Thanks in advance.
Vijay
Message Edited by 12345qwertt on 08-05-2008 03:20 PM
Hi 12345qwertt,
This toolkit is no longer officially supported by NI, but you can download the VIs that were included in this toolkit, and there are still resources available on NI.com.
NI LabVIEW DSP Test Integration Toolkit
LabVIEW DSP Test Integration Toolkit for TI DSP Manual
LabVIEW DSP Test Integration Toolkit Video Demonstration
I'm having trouble identifying the question in your post. Would you please elaborate?
Similar Messages
-
DSP Test Integration Toolkit doesn't work with CCS4
Hello,
After good experience with CCS2 & DSP Tollkit I've got CCS4 from TI.
There is no connection from the toolkit to this CCS version.
Is there is new version of the toolkit or some support ?
Regards.
VladimirVladimir,
What Version of LabVIEW and the DSP Module are you using?
This document in the LabVIEW help may provide some help:
Using the TI Code Composer Studio Toolchain with the DSK6713 Example Target (Microprocessor SDK)
This Tutorial on our website also talks quite a bit about the Code Composer Studio:
Connecting to Texas Instruments DSPs Using the LabVIEW DSP Test Integration Toolkit
Ben Sisney
FlexRIO V&V Engineer
National Instruments -
NI LabVIEW DSP Test Integration Toolkit
hello.... i am 3rd year electrical engineering student @ RVCE banglore India, and i am doing a project on low power MP3 players using LabVIEW as a development platform and i have the support of DSK 6713 DSP kit by TI in my Dept Lab... but as a student i can't afford NI LabVIEW DSP Test Integration Toolkit for the interfacing of LV with DSP.. so.. if somebody is having NI LabVIEW DSP Test Integration Toolkit, i request them to kindly give me that software which is absolutely required for the completion of my project... thanks in advance...
Hey Saha,
We're really glad that you are interested in the DST toolkit, however, it is inappropriate for you to request that someone upload a piece of software that cost money. This is the equivalent of asking someone to do something illegal for you. That having been said, your school may have the software already. I would contact [email protected] to see if your school has a license.
Chris C
National Instruments
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect -
"labview dsp test integration for TI dsp": not available
hi
i have been trying to locate this particular toolkit "labview dsp test integration for TI dsp",but it gives me error "no content available. i have been refering to this particular book that guides on how to use labview with TI dsp.
check chapter 9,section 2(ie 9.2).
http://books.google.co.in/books?id=f-rFsAwd3TAC&q=TMS320C6173#v=onepage&q=TMS320C6173&f=false
http://digital.ni.com/public.nsf/allkb/305E2B0DA391CD4786256D0C006EE31C
but i was goin through i found that this toolkit is maybe not anymore supported by NI.can some one plz let me know on how to interface my TI dsp like TMSC6713b etc nd burn progm on it using labview.Debarati,
I did some more research into your issue and found out that unfortunately, NI no longer officially supports the DSP Test Integration Toolkit as seen here: http://zone.ni.com/devzone/cda/tut/p/id/5839
I also see that you located our example VI here http://zone.ni.com/devzone/cda/epd/p/id/4311 and that the VI asked you for a .pjt file that you could not locate in CCSv4. Being that we no longer support the DSP Test Integration Toolkit, your next course of action would be to contact TI and inquire what .pjt file corresponds to in the newest version of CCS. I hope TI can be of more help to you with this issue since, as I said before, we no longer support this toolkit.
My apologies,
Larry H
Applications Engineer
National Instruments -
Installing Blackfin Test Integration Toolkit
Hello
where can i find the necessary files (Blackfin Tookit.exe) to install this Toolkit for LabView Embedded Module for ADI Blackfin Processors board?
Are there further (free) Toolkits available for this board?
Best regards,
JohannesThe Blackfin test integration toolkit allows you to use LabVIEW on
Windows to connect to a board with an ADI Blackfin on it so that you
can control the Blackfin on the board. Using
this toolkit, you will be able to automate
the Analog Devices (ADI) VisualDSP++ development environment and
communicate bi-directionally to your Blackfin processor using
Background Telemetry Channels (BTCs). It's typically used by test or
design engineers who want to test their hardware or the C code running
on their Blackfin.
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=EEBFA0D90A3C1C75E0340003BA7CCD71
Joel Sumner
NI-Shanghai -
How to call test Sequences developed by using CVI Test Execuitve toolkit in Test Stand?
There is a feature in TestSatnd which can convert CVI sequence to test Stand Sequences. But test stand is not recognising these sequences saying " not a valid CVI test sequence". Is there any version Issues, while converting these sequences to TestStand?
Hi Scott
In continuation of previous question..
As per the suggestion, when I am trying opening one sequence(.SQU) file,developed in CVI Test Executive V 1.0.1., in CVI Test Execcuitve V 2.0.1, Executive is throwing error.
The Pop Error is " Section [Sequence] missing from sequence file c:\xxx.squ"..
and when I am trying opening these sequence file in sequence editor, the tool it self is crashing.
Please suggest!!
Is there any specific tokens which we need to add in .SQU files of V 1.0.1, so that V 2.0.1 can understand them? Just to check the possibility of manual updation of .SQU files.
Regards
Amit -
LabVIEW DSP Test Integratio​n Toolkit support for Code Composer Studio version 4
Hi,
I came to know about the LabVIEW DSP Test Integration Toolkit support for Code Composer Studio from the link http://zone.ni.com/devzone/cda/tut/p/id/5839. I would like to know if this works with Code Composer Studio version 4 also. I am using CCSv4 with TMS320C6748 board. If not, can you please tell me if NI has brought out any software that helps in real time data exchange between CCSv4 and Labview?
Regards,
Debarati.Debarati,
I did some more research into your issue and found out that unfortunately, NI no longer officially supports the DSP Test Integration Toolkit as seen here: http://zone.ni.com/devzone/cda/tut/p/id/5839
I also see that you located our example VI here http://zone.ni.com/devzone/cda/epd/p/id/4311 and that the VI asked you for a .pjt file that you could not locate in CCSv4. Being that we no longer support the DSP Test Integration Toolkit, your next course of action would be to contact TI and inquire what .pjt file corresponds to in the newest version of CCS. I hope TI can be of more help to you with this issue since, as I said before, we no longer support this toolkit.
My apologies,
Larry H
Applications Engineer
National Instruments -
How to Read Variable Values in WAD 7.0 Using JavaScript
I found a how to: How to Read Variable Values in WAD 7.0 Using JavaScript on SDN.
I get a Javascript error:
bics.getElementsByTagName is not a function
vars = bics.getElementsByTagName("VARIABLES")[0]; // <VARIABLES>
Thats my script:
function currency()
var varnm = "SFS_CP_CURR"; // Name of the variable to be read
root = document.childNodes[0]; // <HTML>
body = root.getElementsByTagName("BODY")[0]; // <BODY>
xml = body.getElementsByTagName("XML")[0]; // <XML>
bics = xml.childNodes[0]; // <BICS_VIEW>
vars = bics.getElementsByTagName("VARIABLES")[0]; // <VARIABLES>
varl = vars.getElementsByTagName("VARIABLE"); // gives no. of variable in DP
for ( i = 0; i <= varl.length; i++ ) // Loop one by one
vari = vars.getElementsByTagName("VARIABLE")<i>;
varnam = vari.attributes[0].text; // get variable name
mem = vari.getElementsByTagName("MEMBER")[0];
varval = mem.attributes.getNamedItem("name").value; // read variable value
if (varnam == varnm) //check varname in loop needs to be read
if (varval == "ZMON") // check for value1 and fire command1
SFS_CP_M();
if (varval == "ZKON") // check for value2 and fire command2
SFS_CP_K();
break;
Where's the mistake?I'm afraid I haven't made my question understood clearly.
What I am looking for is a method to get the value of variable inside excel (e.g. put it into a cell / range of a worksheet, so that we can reference it and use it as an input for planning function execution).
Please advice.
Thanks in advance,
Shady -
How to use a variable on columns using Oracle Data Integrator
How to use a variable in oracle Data Integrator expically on colums.
yes exactly,i selected update on new column,if i didn't select update on new colum then error is not coming regarding update.
but this time error is coming on "insert new rows".
java.lang.NullPointerException
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.bindSessVar(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.bindSessVar(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskPreTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source).
Can u please tell me what stpes i have to follow to solve this -
Error : A READ-ONLY bind variable used in OUT or IN-OUT context
Hi,
I got error from my report as A READ-ONLY bind variable used in OUT or IN-OUT context in formula column. I already face this problem but at that time i cleared , but now i cont able to do, please give suggestion to this
regards
venkiI find my ERROR in that report, that A READ-ONLY bind variable used in OUT or IN-OUT context is
when we assign a database column in a placeholder are summary column.
From that placeholder or summary column will call by formula column
you might be face that error, But how means
when that database column , we are assign that decode, case or NVL funtion using else condition as Null you may be face that error.
Without my knowledge it may seem some other problem also
without any idea we con't able to clear this error.
venki -
Read shared variable using D/3 DCS
This is a rather odd question.. I think it can be done, but I have not yet figured how.
A client has a DCS System (I believe from NovaTech), which communicates with a database.
They use a different PC to get data from a cFP using Shared Variables.
There is mention of data being sent over a Modbus Interface.
They want to know if it is possible to read the Shared Variables directly using their DCS System. If the DCS was from NI, it would probably be easier to accomplish. However, I am not at all acquainted with the NovaTech product, but I believe there must be a way to innterface to it. Probably using Data Sockets and/or PSP Protocol.
I realize the above is rather obscure... I have sent an email requesting more info and I am preparing the next email. I figured that I'd better do some background investigation and ask proper questions.
Has anyone attempted such a thing or similar? How about reading Shared Variables from Non-NI software? I did find some threads discussing reading/Writing (to/from) Shared Variables using LabWindows-CVI, but I suspect this will be quite different. Maybe I'm wrong..Thanks Christian.
I will continue in this thread after I find out more details from the client.
RayR -
ID: How to use the test Configuration tool
Hi all,
I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
I have given the input parameters what it has asked.
Header details:-
sender service,sender message interface and namespace.
payload:-
xml format( taken from message mapping)
log result:-
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
Please help me how to work with this tool.
Regards,
Deviprasad.hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
i think it means...its trying to make a connection : HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
pls rectify me and convey me if u get the proper answer....or if i m wrong..
pls try to do use the test after login to IB through a user with maximum authorization.... -
Hi, I've been trying to figure out how to pull data out of my SQL Server databases and from reading some posts and doing some tests with examples, I can kind of get data connecting into my SQL server, but so far nothing that helps. Is it possible to actually get data out of a SQL Server database without using the Database COnnectivity Toolkit? and if so, how? are there whitepapers and/or examples of this? So far, I cannot find anything that works. thanks.
I haven't ever done it before in LabVIEW and don't have the time to do much of the research right now.
That having been said, you will want to look for either a .NET library or an ActiveX control. Aside from the toolkit, you aren't going to find a native solution to LabVIEW - which means using other libraries. A quick google search returns this:
http://msdn.microsoft.com/en-us/library/ms810810.aspx
which may help. -
Session variable using :GROUP variable in init block
I'd like to filter using session variable.
This session variaible should be build using :GROUP special session variable
I'd like do something like this (init block):
select case when instr(upper(':GROUP'), 'ADMINISTRATOR')>0 then 'Yes' else 'No' end from dual
but it seems to doesn't work properly (It means I have always 'No' value)
After investigation i did some simple test
initialization block like this:
select upper(':USER'),upper(':GROUP') from dual
set variables using above init block: UPP_USER and UPP_GROUP
next i did simple reques with 4 columns:
*1. VALUEOF(NQ_SESSION.USER)*
*2. VALUEOF(NQ_SESSION.GROUP)*
*3. VALUEOF(NQ_SESSION.UPP_USER)*
*4. VALUEOF(NQ_SESSION.UPP_GROUP)*
and my result is:
1. Administrator
2. Administrators;IT_Deparment ....
3. ADMINISTRATOR
4. _:GROUP_
Why in 4th column I didn't get: ADMINISTRATOR;IT_DEPARTMENTS ....
Can I use special variable GROUP in initialization block?
Could someone explain it?Hi,
Only :USER and :PASSWORD are available
try (select 'VALUEOF(NQ_SESSION.USER)', 'VALUEOF(NQ_SESSION.GROUP)' from dual instead.
(You migth have to force a fill of the group variable first)
Regards
John
http://obiee101.blogspot.com/ -
How to use Http test Client for Java Client Proxy Scenario
Hi,
I build a scenario using Java Client Proxy where JSP as my FrontHand.
Can I know that whether i can use Http Test Client in place of JSP for sending data and getting response back. If yes than how can i implement this ?
Regards,
AbhiHi,
with Http Test Client you post your messages
directly to the Integration Engine (not using adapter framework)
so you can use Http Test Client to simulate any message
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>
Maybe you are looking for
-
Safari won't open (EXC_BAD_ACCESS)
I have tried to update the latest version of Safari (for Tiger 10.4.11) but, still, won't open. It keeps unexpectedly closed. The log is here : Date/Time: 2010-12-29 21:13:07.783 +0700 OS Version: 10.4.11 (Build 8S165) Report Version: 4 Command: Safa
-
Alternative to f:verbatim to use custom DIV classes?
I have some pages with panelCustomizable facets containing simple HTML like so: <f:verbatim> <div class="tableClass"> <table cellpadding="0" cellspacing="0"> <tr> <td colspan="2"><h2>TABLE TITLE</h2></td> </tr> </f:verbatim> At runtime, in "*Edit mod
-
Any help please. I am new to MAC products
-
Re:check box in smartforms
Hi all, How to add a check box in a smartform ?
-
Hi, When I ran my baseline with one jdbc record adapter there was no issue. When I added one more JDBC record adapter it fails. I have mentioned the pass through properly itself COLUMN_HANDLER_CLASS com.endeca.soleng.itl.jdbc.AdvancedJDBCColumnHa