Read Write Calender Sharing with at least 1 other use

I've read several entries on the concept of publishing a calendar such that two people can both read and write to it. My situation is the same as numerous others, either a co-worker or a spouse trying to share a calendar where either party can edit events and have those edits reflected into the shared calendars on the others computers
What is the deal with this? Google calendars, Yahoo, etc all have this functionality. My wife and I are both mobile me users (unique user ID's in a family pack). We both use Apples, etc.
Giving the duplicity of entries, I think it would be in Apple's interest to publish a response on this topic. If the functionality is supported, then there should be a help file or application note on the topic. Same is true if a work around exists.
Anyone with any formula for how two people can share a common calendar that each other can edit and have those edits published to both parties calenders in iCal?
Thanks
MikeK

Mike,
Giving the duplicity of entries, I think it would be in Apple's interest to publish a response on this topic. If the functionality is supported, then there should be a help file or application note on the topic. Same is true if a work around exists.
Since Apple has not provided that native capability, and this is a user-to-user forum, you may want to try this third party solution: BusySync - Sync iCal and Google Calendar - from BusyMac
;~)

Similar Messages

Has someone already succesfully used the ni i2C library to read/write an eeprom with ni pxi 6551 on labview?

Hi,
I'm trying to read/write an eeprom with an i2c protocol and ni pxi 6551 module.
At first, I tried to simply read the eeprom, because i know i am expecting 11111111 as a response, but it did not work.
So I tried something easier, and I succesfully wrote a pcf8574ap.
But i can't read it.
Seems like I am not able to "hear" the answer; when the sda line should be filled with an 8bit information, it remains at Z-state.
And because I am using the i2c library, i think there might be a problem with this library, or i am doing something wrong.
Hoping someone has an answer.
Johanna

I think the best place to ask your question in this thread
I2C Digital Waveform (IDW)
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Problema di polimorfismo con Read/Write delle Shared variable

Salve,
Cercando di modificare l'esempio di progetto "Shared Variable Client/Server" in un progetto dove sono i diversi client a mandare dati al Server ( ovvero l'esatto contrario di quello che fa )
mi sono inbattuto nel problema illustrato nelle due figure che seguono.
Ovvero, sostituendo "Writable PSP Variable" ad "Readable" nella scheda "Connect"(FIGURA 1) mi da un errore nella scheda "Read/Write" (FIGURA 2), ovviamente anche qui ho sostituito a "Read Variable" un "Write Variable".
Mentre utilizzando il Data Socket funziona, ma non mi sono chiari i vantaggi e gli svantaggi nell'utilizzare quest'approccio.
Qual'è la strada migliore tra Shared Variable e Data Socket per creare un sistema Client/Server così costituito, ovvero con un cospicuo numero di client da servire ( destinato a crescere )che mandano simultaneamente un discreto quantitativo di dati ( circa quelli di una seriale a 115200bps ) ad un server
FIGURA 1
IMMAGINE 2

Translation
Hi,
Trying
to modify the sample project "Shared Variable Client / Server" in a
project where different clients to send data to the server (ie the
exact opposite of what it does)
I untapped in the problem illustrated in the two figures that follow.
That
is, replacing "Writable PSP Variable" to "readable" in "Connect"
(Figure 1) gives me an error in "Read / Write" (FIGURE 2), and of
course here I replaced "Read Variable" a "Write Variable.
While using the Data Socket works, but I have clear advantages and disadvantages of using this approach.
What
is the best route between Shared Variable and Data Socket to create a
client / server system so constituted, or with a large number of
customers to serve (to grow) that simultaneously sends a fair amount of
data (approximately those of a serial to 115200bps) to a server
The images points to a gmail location. It is not properly attached.

Editing read/write DVD's with OS X 10.5

Hi folks,
I wanted to delete a couple of videos from a read/write DVD, but leave a couple of the existing videos on it also (6 different videos on it recorded from TV on a DVR), and then copy a few files from my mac onto it to free up some space. Is this possible with a macbook pro? If so, how? I gather disk utility will only do multisession CD's and NOT DVD's....

All DVD burners can do DVD-R multisession, however the initial burn has to be setup as apendable.
Same with CD burners on CD-R. If the initial burn is not appendable, that's the last burn.
CD-RW and DVD-RW are complete rewrite burns rather than appendable, you lose everything on the disk during a rewrite. I am not sure if you can rewrite over an initial -R or +R burn.
DAO, if your burner supports it as far as I know would require installing Windows on your Mac.
Here are the options*
http://www.macmaps.com/macosxnative.html#WINTEL
- * links to my pages may give me compensation
Message was edited by: a brody

Can I read/write global variables that are in other PC?

I attach the vis and the executables.
My problem is that when I run( continuosly, because in other way, I read the default value of the variable) getvalue.vi and setvalue.vi, I don´t have any problem, I can read/write the global variables, the two vis is running in the same PC.
But when I do the exe and I run them continuosly , it doesn´t work.
Any solution?
Thanks in advanced!
Graci
Attachments:
Get_Value.vi ‏30 KB
Set_Value.vi ‏30 KB
Exe.zip ‏272 KB

Hello Bichillo,
By running the vis continuously you are running into race conditions. If you cannot control when you are writing to or reading from a global variable, you cannot know whether the value writen/read is the right one or not.
In your case the global variable value that is read is sometimes the last value writen and sometimes an empty string.
To make the global variable behave as desired, that is, keeping its last value, the global variable must be in memory when you access it using VI Server. If it is not in memory, the returned value is an empty string. That´s why you sometimes get a non-empty string: when you access the global variable to read its value, it happens to be in memory because you´ve just writen to it.
To ensure that the global
variable is always in memory and it keeps its last value, you must include the global variable into your block diagram. I am attaching modified vis that implement this.
Hope it helps.
César Verdejo
Training and Certification | National Instruments
Attachments:
Get-_Set_Value.llb ‏48 KB

Unable to access only Read Write addresses of AB Micrologix 1400 PLC using NI DSC and NI OPC server

Hi,
I have been using NI DSC and OPC servers (NI and Kepware) to communicate with Allen Bradley Micrologix 1400 PLC (1766-L32BXB). Recently at one site I found that I could access Process values from the PLC correctly (Read Only tags) but could not access the Read Write Tags at all. The latter are addresses to which it should be possible to write Set (i.e., references) values from MMI or PC software. I am able to do so from the MMI not from the PC software. I get communication error message on the MMI and PC, mentioning the PLC address being accessed (e.g. N7:0).
Support from the supplier is not available. Hence can anyone let me know if ladder logic could have been written to prevent PC software based access of Read/write addresses (N7:0 to 9 in this case), while permitting access to Read only addresses? Is the problem at the PLC end or OPC server end? Is there a way to get around this?
Thanks in advance.

The OPC Server cannot force Outputs so if th registers in question are the outputs of ladder rungs you cannot write to them via the server. The controller will accept the write from the server but will not execute the write. In some cases the server event log will post an error if it is the PLC. Do you get errors when you try to write and if so what are the posted error messages.
Fred Loveless
Kepware Technologies
http://www.kepware.com

I am looking for what type/setup of Read/Write command in RSLogix 5000 to be used with the NI Ethernet I/P Driver

I am working on trying to get LabView to communicate with an Allen-Bradley Compact Logix PLC using the NI Ethernet I/P driver. I am currently getting errors on both system of a CIP Message instruction error and cannot determine if the problem is in the PLC or the NI. At this time we are leaning toward the PLC, thus I was wondering if anyone new what type/setup of message read and write to utilize.

Hello jabcae,
Thank you very much for posting your questions.
I recommend posting to the PLC Manufacture’s forums. They will be able to provide more insight on the PLC code.
I also recommend posting this question to the Industrial Communications forum:
http://forums.ni.com/t5/Industrial-Communications/bd-p/260
That forum is monitored by the developer’s of the EtherNet I/P Toolkit. They will be able to assist with the LabVIEW programming.
Regards,
Thomas C.
Applications Engineer
National Instruments

E65 delay taking photo with camera - Can other use...

Can any other E65 users please confirm if the following camera behaviour is normal:-
When I take a photo I hear the shutter sound and see a frozen picture on the screen.
However, this frozen picture is not the one that is stored. The camera actually seems to take another freeze, (no accompanying sound), about a second later. This second shot, which is the one that is saved to memory, is invariably blured or incorrectly framed as the camera has moved away from pointing at the subject.
Anybody see this bug too?
Mike

All firmware is original I only got it last week, the only update I have made to it is installing the latest version of the Nokia pc suite (Nokia_PC_Suite_683_rel_14_1_eng_web) if you don’t already have this version and install it you may run in to a driver connectivity problem.
This happened to me, if it does happen it’s because there is old driver software conflicting with new software. to solve uninstall Nokia pc suite then go to start, control panel, add remove hardware and get rid of "Nokia connectivity cable driver" and "PC connectivity solution" then re-install the latest pc suite.
Other than that I don’t really know what firmware version I have on there at the moment, how can I check it?

Is it possible to browse a Snow Leopard back-up on a Time Capsule shared with a Lion backup using the Lion-only machine?

My 2006 Macbook died but was backed up to my Time Capusle. This machine was running the most uptodate version of Snow Leopard at the time.
I've read that I should be able to access this backup using a different Mac but I can't see it when I CTRL-click the Time Machine icon (in the dock), when using my Macbook running Lion 10.7.1. It only shows me the current backup for this machine.
I know the old backup must be there somewhere as the Time Capsule is almost completely full (700 gb of the 1tb was dedicated to the old MA

If you control-click on the Time Machine icon and select "Browse Other Time Machine Disks" but don't see the other backups, try this: Look in the "sidebar" of a Finder window for your Time Capsule. If you see it, select it, then look for the Time Capsule's disk (probably called "Data" if you didn't rename it). Double-click that to mount it. Now try again to control-click on the Time Machine Dock icon.

Read/Write speeds with Airport Extreme and USB Hard Drives

Anybody know how fast the read/write speeds are with a USB hard drive and the Airport Extreme Base Station?
My Setup
I have a 17 MBP (2010) and a 13 MBP (2011) - no SSD's
MBP generally connect via 802.11n 5Ghz with a very strong signal
Gigabit connection on a Windows Desktop
I have a variety of external drives (7200, 5400, Drobo) at varying capacity (320GB, 2TB, 5.6TB)
Goals
Backup: Time machine
Backup: File copies of pictures and home videos (greater than 1GB files)
Backup: Crashplan
File sharing: Aperture libraries--not sure if that is possible or practical. That is something that I need to research further...but on the off chance people have experience with it.
Thanks!

ishjen wrote:
Anybody know how fast the read/write speeds are with a USB hard drive and the Airport Extreme Base Station?
Welcome to Apple's discussion groups.
Apple's AirPort base stations aren't known for fast file serving, but for most purposed they're fast enough.
I can't comment specifically on your Aperture plan, but with some software it's important to avoid simultaneous access by more than one user.

How to: Create a Program with the rs232 Device -Magcard Reader Writer

Hi Guys!.
Im New in using VB.net 2010 express
and it is my first time to do a project with a device needed to incorporate with it.
I have a device Magnetic Card Reader writer and a i want to create a connection and UI
that interacts with the device alone without using the default application and process.start command.
the main problem i want to be solve is to perform the connection and commands on a single form by allowing the user to read and write the data on a single form.
what i want to do is to create a main form that executes the commands needed to activate the event or allows the user to use the device w/o using the software. with the use of text box and button, while the read executes automatically if the card is swipe
to it end fill out the focus textbox given.
i have here a document that discuss commands for the device and i think it is needed to successfully connect all the process from device to the system
can you help me to do this project? tnx.. :)

Hi,
Welcome to MSDN.
I am afraid that this is not the proper forum for this issue, since each Magnetic Card Reader writer has its API for developers.
You could consider getting supports by connecting with the publisher of that Magnetic Card Reader writer which should have the sample about using its API.
In addition, I did a research, you could refer to
Build a .NET Class for Serial Device Communications with P/Invoke to get how to communicate with that serial device.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

External HDD to be shared with Mac and Windows XP

I wish to share an external HDD via firewire/USB between an ibook G4 on OSX 10.3.9 and Windows XP. Apart from using FAT32 and having partitions for each OS just in case can anyone share any risks considerations I need to be aware of? I intend on having a generic 320Gb Seagate drive installed into an aluminium box but for some reason Lacie seem to be particularly good with Mac's and I can't ascertain why.
ibook G4 Mac OS X (10.3.9) Acer Windows XP

There appears to be some misunderstanding about what systems can read or write what hard drives.
OS X can read and write HPS+ and FAT32 formatted drives, and can read, but not write to NTFS drives. Windows can read and write NTFS and FAT32 drives, and cannot read nor write HPS+ drives. Fresh out of the box the only read/write file sharing is via FAT32 drives.
There are reasonable methods for expanding this capability.
(1) Windows can be given the ability to read and write HPS+ drives by installing MacDrive 6 on the Windows machine. As far as I know there is no software available which gives OS X the ability to read and write NTFS drives - - maybe it exists or is under develpment somewhere.
(2) Both OSX and Windows can read/write files that are on a networked file server regardless of the file system used by that file server. The server hides its underlying file system from clients. Just connecting a network capable HDD to a router is NOT the same thing as having a file server on the network - - the same basic file limitations still exist.

~/oradiag_$USER/.. and "Directory does not exist for read/write" issue

Hi.
Recently I've discovered that ADR was creating a folder in one of ours Oracle 11.2.0.1 server, in the users home like ~/oradiag_$USER/.. The problem is that this logging files dont stop growning, and they are filled only with this lines:
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:41:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
etc
I've searched around internet about this issue all that I've found is a "workaround" by creating those folders. And yep, it works, it stops growning.
Then I checked the others servers that we have, and the problem replicates in some servers with the same Oracle version.
My question is: Why this? Why in some servers ADR is looking for that folder? That folder didnt exist in any of them, but only some servers tries to read/write on it (or, at least, log it) What parameter relies on it?
Regards.

Metalink note
11g Sqlnet Log Shows Error "Directory does not exist for read/write" [ID 797678.1]
Errors Filling log.xml and sqlnet.log: Directory does not exist for read/write [opt/oracle/oemagent/agent11g/log] [ID 1291286.1]

InputStream - OutputStream: Reader - Writer

What was not possible by InputStream & OutputStream that JAVA had to provide Reader and Writer. I have found out that if I use InputStream to read a Chinese HTML page, it reads it. I can create a copy of the same HTML page by using OutputStream, the data remaining un-affected. Then, why do I go for Reader and Writer?
What happens if InputStream encounters some unicode charchters to be read? How does InputStream and OutputStream function internally?

Well, you can go look at the source of InputStream/OutputStream.
The reason we have Reader/Writer as well is because the streams don't deal with character encoding (or at least, they tried to and did it very badly). So you would normally use streams for dealing with binary data and reader/writer for dealing with character data. If you're using streams to copy a file and this file happens be be HTML with Chinese characters, this will work fine because you're just duplicating bytes. But if you try and use a stream to read this file into memory, you will have problems because it won't understand the Unicode characters in the file. In this case, you need to use a Reader and tell it what the character encoding of the file is.

NFC tags read/write operations on low level

Hi,
I know this is little bit offtopic question - but since you are experts in the area I will try to ask you probably a pretty simple question:
1/ I would like to know which protocol is used for the read/write operations to the NFC tags are used. According to my understanding after the tag is placed on the NFC reader (NFC phone, USB reader), it is powered and set to the ready state. Then the application protocol for read/write operation is used. As I think the exact format and the content of commands used for read/write is not specified in ISO 14443 and it is dependent on a tag hardware/manufacturer and will be different for FeliCa/Mifare/Innovision/etc. tags, so there is no way how to handle NFC tags read/write operations with the single implementation. Is that assumption correct?
2/ Are there any tags, which supports the APDU 7816-4 commands for read/write operations?
Thank you for reply
Kind regards,
STeN

hello,
you have to read the NFC forum specs. all of this will be better explained than by me.
more than one protocol are used according the the contactless front end configuration and abilities. It includes ISO14443-A, ISO14443-B and Felica. Sometimes other protocols are also available, for example Innovatron (not Innovision lol)
Mifare is not a protocol, it is a line of NXP products. These products use the lower layers of the ISO14443-A protocol specification.
There are 4 types of tags
1) using the lower layers of ISO14443-A
2) using the lower layers of ISO14443-B
3) something related to felica?
not sure exactly about these 3, you have to read the specs. Everything is clearly understandable, not like ETSI.
4) something using ISO7816-4 commands on top of ISO14443 A or B or others. You have SELECT, READ BINARY, UPDATE BINARY. You can implement that using javacard, I did it and it works. You need two binary files, that can be hardcoded.
Regards
Sebastien

Read Write Calender Sharing with at least 1 other use

Similar Messages

Maybe you are looking for