Read/Write errors after installing SSHD
After installing a Seagate Thin 500GB SSHD into my Late 2008 MacBook Pro, I would get errors after my computer had been asleep for several hours. The error codes end with -50. I thought that limiting the speed of the drive with a jumper would work, but it hasn't.
This is from the Toshiba knowledge base : http://forums.toshiba.com/t5/Computer-Troubleshooting/Errors-after-installing-new-advanced-format-ha...
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****
Similar Messages
-
Read only error after instalation
I was using the Arch 0.7 beta2 build for a while and everything was, more or less, fine, I finally decited to update to 0.7 and now after I install I get a buch or "filesystem is read-only" errors and then it frezes when starting hotplug, I love Arch, the philosophy is what I have been looking for, I hope someone can help, Even Gentoo can't muster the speed!
you can start with disable hotplug,
you should also use udev instead if devfs, just edit your menu.lst(devfs=nomount) and your fstab to static naming scheme, (/dev/hdx),
if that not help it could be some form of apm/acpi trouble, there are afew kernel parameters you could try as a workaround for that, can't remeber them in my head right now but i think a popular one is "noapic", -
Hi,
I am facing a lot of relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express Edition).
I had followed Oracle E-Business Suite R12 Installation Steps on Windows XP (Oracle E-Business Suite R12 Installation Steps on Windows XP and for VS2008 have followed metalink note MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]
After applying the patch from section 1 9491976, there are a lot of relinking issues as follows:
=========================
Relinking module 'ADCONV.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/ADCONV.exe
Starting link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
Relink of module "ADCONV.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'AFTBLGEN.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/AFTBLGEN.exe
Starting link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
Relink of module "AFTBLGEN.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'APPR60UE.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this APPR60UE.dll
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
appr60ue.LIST
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Unable to get the objects for module "APPR60UE.dll".
See error messages above (also recorded in log file)
for possible reasons for the failure.
adrelink is exiting with status 1
=========================================
Has anyone faced something similar in the past?
Regards,
NeerajHi Helios,
That got resolved after I added the location of the dll in the PATH.
Now i m getting LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
The log looks like:
Relinking module 'fndcpesr.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
Starting link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2908:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:759:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2955:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:1340:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe
-MAP:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/fdpesr.obj \
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oranls10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
gnumake: ***
[D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe] Error 157
Done with link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
Relink of module "fndcpesr.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Regards,
Neeraj -
Getting error after installing admt 3.2
hi team
i am getting error after installing the admt 3.2 on server 2008 R2 where i have installed sql server 2008 sp1 with express edition
the server is a DC
the error is "Unable to check for failed actions. :DBManager.IManageDB.1 Unable to retrieve the database file pagth from the registry. the system cannot find the file specified"
Thanks,
virajYou should change the forum type on this to a question. The way you have this labled as a discussion not a problem.
See if the link below helps you out.
http://support.microsoft.com/kb/2266373
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, Vista, 2003, 2000 (Early Achiever), NT4
http://www.pbbergs.com Twitter @pbbergs
http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup. This posting is provided "AS IS" with no warranties, and confers no rights. -
My Xperia Mini Pro Touchscreen error after install Custom Rom , and now Bricked / Bootloop
Hi There. .
I've some problem here. .
My Xperia Mini Pro SK17i Touchscreen error after install Custom Rom , and now Bricked / Bootloop
I've tryin' to use Flashtool and flash Stock Firmware, but it still bricked. .
Any body may have a sollution for me?*Moved to Android development*
Hopefully you can get some help here.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
I get a 213.10 error after installing Captivate
Why do I get a 213.10 error after installing Captivate 7 on a Windows 7 32 bit workstation?
These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time? -
'CRT not initialized' error after installing MS Office 2010
Hi,
I encountered 'CRT not initialized error' after installing MS Office 2010. I think that with previous version of CVI there were no problems. But, with Labwindows/CVI 2012 error has outbroken. The details are as follows.
- OS : windows 7 Enterprise (32bit)
- Labwindows/CVI (v12.0.0 (422))
- MS Office 2010 (word, powerpoint, excel)
#1. clean install windows 7 (32 bit)
#2. install Labwindows/CVI v12.0.0 and device drivers (DAQ, Motion)
#3. compile and run attached test program : SUCCESS
#4. online update windows 7 (service pack, explorer 9, and etc)
#5. compile and run attached test program : SUCCESS
#6. install MS Office 2010
#7. compile and run attached test program : 'CRT error'
#8. uninstall MS Office 2010
#9. compile and run attached test program : SUCCESS
I think there are some conflicts between office 2010 and labwindows v12.0.0. How can I solve this problem?
Thank you in advance.
Attachments:
step7-CRT error.jpg 31 KB
test program.zip 3305 KBMore specifically, I decided that some parts of MS Office files and features of NI's motion library conflicts. Because in the attacted sample program, if I exclude NI-Motion functions then the program excutes nicely. But if I include NI-Motion fucntion, for example flex_select_signal, then the 'CRT not initialized' error occurs.
To solve this problem I tried step by step installation check for MS Office 2010. During each step I included more optional features in MS Office and after each installation I compiled and executed my sample program. At finally, I found that the addtional part of MS Office 2010, if I install Office Sharing Function>Microsoft IME(Korean), then the 'CRT not initialized' error occurs.
Temporarly, I solved the problem with NOT installing 'Office Sharing Function>Microsoft IME(Korean)' optional feature in the MS Office 2010.
Could you tell me why this problem occur? -
Please Help Me, Windows Form Error After Install
help me to fixed this errors after install visual basic
Instances of this error (1)
1.
Hide Call Stack
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse..ctor(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse.GetUniverse(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkProvider..ctor(IVsDesignTimeAssemblyResolution assemblyResolution, IDesignTimeAssemblyLoader assemblyLoader, TypeDescriptionProvider parentProvider, IVsSmartOpenScope openScope)
at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.get_TargetFrameworkProvider()
at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.GetProvider(Type type)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.GetType(String typeName)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.System.ComponentModel.Design.Serialization.IDesignerSerializationManager.GetType(String typeName)
at System.ComponentModel.Design.Serialization.TypeCodeDomSerializer.Deserialize(IDesignerSerializationManager manager, CodeTypeDeclaration declaration)
at System.ComponentModel.Design.Serialization.CodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager manager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager serializationManager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.DeferredLoadHandler.Microsoft.VisualStudio.TextManager.Interop.IVsTextBufferDataEvents.OnLoadCompleted(Int32 fReload)Hello,
I am afraid that I could not get any error message form that list you shared, is there any other message about that error?
To narrow down this issue, I would recommend you check the following suggestions.
1. Rebuild your project and debut it to see whether it could work.
2. If #1 works fine, then publish it and install that application to check whether there is any issue while installing.
3. If #2 works too, then you could share the screenshot and the detailed error message with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)
Uninstalling and installing again - nothing change.Hi slawek,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena -
Error after Install SAP NetWeaver 7.01 ABAP Trial Version
Hi Everyone,
I am new on SAP and I am getting this error after install SAP Netweaver 7.01 ABAP Trial version in my notebook.
It is Windows Vista Basic, 3GB of RAM, 2.1 Core Duo 2.
Installed successfully, but when I go to "Start" in sevidor it returns the following error, and not start:
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24832,ERR_SHMNOTAVAILABLE: Shared memory not available
-24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
Someone could help me?Hello Marques Polastri ,
->Please check/stop all database applications and tools, like DBMGUI and dbmcli ... Then check/kill all processes left with name dbmsrv.exe, if you will still have them. After that rename C:\sapdb\data\wrk\NSP.dbm.shi and C:\sapdb\data\wrk\NSP.dbm.shm, shared memory files, to C:\sapdb\data\wrk\NSP.dbm.shi.old and C:\sapdb\data\wrk\NSP.dbm.shm.old.
Try to connect to the database NSP & let us know the results.
-> Please update with output of the following commands:
dbmcli db_enum
dbmcli -d NSP -u <control>,<pwd> db_state
Thank you and best regards, Natalia Khlopina -
Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
eth0 Link encap:Ethernet HWaddr 00:15:17:F7:81:53
inet addr:192.1.1.11 Bcast:192.1.1.255 Mask:255.255.255.0
inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:15868 (15.4 KiB)
Memory:dfcc0000-dfce0000
eth1 Link encap:Ethernet HWaddr B8:AC:6F:92:C2:0C
inet addr:192.1.1.9 Bcast:192.1.1.255 Mask:255.255.255.0
inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:18959341 (18.0 MiB) TX bytes:9476 (9.2 KiB)
Interrupt:169 Memory:dfbf0000-dfc00000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4035655 (3.8 MiB) TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
Thanks
A/AThis looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
# netstat -rn
# cat /etc/resolv.conf -
Getting a reistry error after installing telling me to reinstall itunes
I am getting a registry error after installing iTunes and tells me that the drivers and data associated with importing CDS or Burning CDs cannot be recoginized and to reinstall Itunes... I have done this about five times now and have removed my computer of all traces of iTunes and am still getting this error. if someone could help it would be greatly apperciated.
Thanks,I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
HP4501e "print spooler off" error after installing printer update
Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?
Loralee,
?? I am sorry the computer is not working. I don't work for HP and cannot comment on lawsuits or other calamities.
If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
If you are using a Notebook:
Close all your programs and shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The procedure does not wipe out your files nor does it destroy your Windows setup in any way. This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
This does not fix severe Operating System errors -- it is just a device reset. It can fix minor problems that updates sometimes cause.
============================================================================
I am sorry you are having so much trouble.
Other help:
HP Mobile Printing
You can call HP for help --
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
Happy New Year, Loralee! I know it seems to be getting off to a rocky start!
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur -
IPod gets read/write error halfway through transfering songs
Ok, I posted the other day about a read write error on my iPod. I got it replaced. New one didn't work on my home computer but I did get it up and running on my laptop at work. When I got home I plugged the iPod into my home computer. Everthing was fine (I have it on manually update). When I tried to put music files on my iPod (drag and drop) I did one and it worked fine. Then I highlighted a group and dragged it over. They were transfering. Then halfway through I got the read write error.
Can anyone explain why this would happen? Why did it work for a little bit and then refuse to keep transfering songs? Do I have to do them one at a time when I manually update? I basically had to restore the iPod when I got to work this morning. Things are fine now. It would be a pain (but still bearable) if I can't use my iPod at home.Can anyone explain why this would happen? Why did it work for a little bit and then refuse to keep transfering songs?
The problem could be one of mnay mentioned in the link below. A complete Reformat of the IPOD using Windows would be a great start and then "restore" the IPODs software. The drive on the IPOD seems to get corrupted at some point and this is the best way I have found to get rid of the problem.
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring i
Pod:http://docs.info.apple.com/article.html?artnum=301267 -
Entourage read/write error
Help,
Entourage will not startup I get a read/write error - when I try to rebuild the database both standard and advanced it gives me this error. I located my mail identities and its empty. How can I correct this problem?
What is causing this?
ThanksI just posted this response to another user's query regarding an essentially identical problem:
This is a relatively frequent, recurring and ongoing problem for Entourage users. My advice is generally to migrate away from the application at your first opportunity, as it is prone to such data corruption issues. If that is not practical, you'll need to become an Entourage maintenance expert to reduce the likelihood of future problems, and you will need to back up regularly.
You'll find this site a great place to start when trying to deal with these issues:
http://www.entourage.mvps.org/faq_topic/database.html
Link segments four and five on this page may be particularly helpful, but you should read the entire document before attempting to recover or reconstruct your Entourage database.
Maybe you are looking for
-
I had been deleting some of the double Dylan songs that are in my I-tunes library and suddenly most of my Bob Dylan collection dissappered . I was requesting to "save file" at the time . How would I get those songs back - if it's possible ?
-
SQL Server Reporting Services configuration issue
When I click on "System Settings" in the SSRS service application management I get an 503 (server Unavailable) error even though the service is running. The farm consists of 4 servers (2 Web and 2 Application server). SSRS is running on one of the ap
-
Internal apple modem wont open
I recently tried an application ¨Service Scrubber¨and may have scrubbed somehow my internal modem. Internet Connect now tries without sounds or dial tone then produces a window that it¨cannot open the device¨. I have looked in every book, nook and cr
-
Calling stored procedure from ADF mobile client
Hi, I have a stored procedure in the database (server side). I need to call that through my mobile client application and display the result accordingly on my .mcx page. Please let me know if there is a way of doing this. Thanks, Ansh
-
Converting .mov files to .avi in Mountain Lion 10.8.2
For the past few years we have been preparing video files for our scoreboard in our arena by converting .mov files in Quicktime 7. All worked PERFECTLY!!! Now after a summer of changes to Apple's OS, we have discovered that we can no longer convert .