Read & write lvm files

Hi All,
I am plotting one parameter against two parameters on XY Graph. I need to send this graph along with 4 numerics & 1 string data captured during the testing for printing. So I just thought of saving this as LVM file into a location & filename of my choice & read back for printing after the testing is over.
XY Graph requires cluster of 2 elements(one is X array, one is Y array) for plotting. I tried writing only graph part alone to lvm file by builiding an array. But when I tried to read back this, it is not either reporting any error or showing the graph on the indicator.
Hope someone can suggest me how to do.
Thanks
Kousy

Hi,
I am sending my vi, LV 7.1 version. Hoping helps me out how to use write & read lvm express vis.
Regards,
Kousy
Attachments:
WriteNReadlvm.vi ‏183 KB

Similar Messages

Read/Write Jar files?

This is really a newbie question, but since there's a forum specifically for jar questions I figured it was better to start here and move it to the newbie section if y'all deem it appropriate.
I have written a desktop application using Java 1.4.1 class libraries and intend the application to run on multiple platforms including Mac OS X, Windows XP and Linux. The application works standalone (not yet jarred) on the machine it was developed on, but now it's time to begin figuring out the distribution method.
Right now, the application reads several files from a flat text-file database, allows the user to peruse and display the information in a variety of ways, and gives the user a method to add to the flat-file database as needed. The file is about a megabyte and is excerpted into memory at initialization, then not referred to again unless the user writes additional data. When the user generates new data, write traffic to the file is fairly light, maybe 2-3kbytes per session.
I searched the forums for the best way to handle read/write data files for distribution and so far I haven't found anything that seems relevant, but surely the question must have been asked and answered before - maybe I'm using the wrong keywords?
Anyway, I have three basic questions:
1) Can I both read and write a file that's enclosed in a jar file? Or are files read-only once "jarred"?
2) Assuming I can both read and write a file within my jar file, is reading and rewriting within the jar so inefficient as to make that a non-preferred approach?
3) How do other folks who have a local read/write datafile in a desktop application deal with distribution? Keep the read/write datafile within the jar? Make a copy of it outside the first time the application is run and always read/write the copy outside the jar? Or some other strategy?
Thanks for any suggestions you can give a newbie at the Java game.
Jon

Thanks, that was pretty much what I suspected.
I have several data files and configuration files for this project, so I was trying to make the distribution as clean as possible. At least some of the config information can be hidden in Preferences, but I was struggling with the data files. I'll include the data files in my jar, then unpack them to the user's directory when launched the first time and work with them thereafter in the user's directory.
Enjoy the Dukes!
Jon

Why can't I open read/write rules file?

I have followed the Cookbook XML tutorial exactly as prescribed, even down to using all the examples from the 'Completed' folder, but when I try to perform any procedure such as generating a EDD or reading an XML instance (the ColorDoc.xml example) I get the following in the log file:
Could not open the read/write rules file
(App\ChapterReadWriteRules)
Make sure you have read access to the file and that
the file is not already in use.
Using XP and Framemaker 7.
Its a real blocker this proble. Have tries unsetting the XP Read-only folder property on all the folders in the heirarchy but XP won't let me do that. Very grateful if anyone could help me over this problem.

What is the path you mentioned the structapps.fm file for read/write rules
It should be full file path for read/write rules(including extension of file). Otherwise there is possibility of throwing the error you mentioned.
Would it be possible to paste your XML application defined in your structapps.fm file??
Thanks
Basav

Read several lvm files into VI

Hello all,
I have a question about how to load several files into a VI. I have done a long measerement with a high samplerate so LabVIEW has made approximatelly 900 lvm files. I want to do two things. The first thing that I want to do, is to see chart/graph of the data with a scroll bar so I can look trough the data. The second thing that I want to do is write the same data (approximatelly 900 files) to lets say 20 files. So the samplerate is from 100 Hz to 0.2 Hz. Is that possible?
In the attachment I have put the VI that I currently have + one of the 900 files that I want to load.
Thanks in advance.
Attachments:
VI + LVM file.zip ‏556 KB

Hello Mark,
I'm a bit confused about the situation:
- Although you're talking about 900 files I only see 1 file in your attachment (as you also mentioned in the post).
Do they all have the same format/sample rate (and amount of samples) in each column?
If not, then please provide the necessary examples, because I don't see your variation of 0.2 Hz to 100 Hz sample rate based on this file.
That left aside, merging files should always be possible (up to a certain point)
- Can you also provide the code you used to generate the lvm-files?
This will give some background information.
Especially beccause I don't see any metadata available in your lvm-files.
- Graph/Chart choice:
If you only want to see all data at once, then a graph would be the solution seeing that you are not interested in the data sets while they're loading and only in the full set of data. Please do also keep in mind the size of the data set you're loading.
If you want to plot all colums in the same graphg with different sample rates per channel/column, then a good idea would be a multiplot XY Graph.
However, here you will also have to keep the data set size in mind.
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

How to to read/write GIf files (not animated)

Hi,
Is there a labview vi(s) that will read a gif file and display it and also that will wirte it? I am interested in non animated gifs.
Louis

Ben wrote:
Well before Mike got carried away in this thread the answer to those questions was "NO".
But if you check that thread you will see that Mike has already done half of the work (reading a gif).
There is limited functionality for writing a GIFin LabVIEW, look in vi.lib\picture\gif.llb\Write GIF File.vi
Message Edited by Phillip Brooks on 10-09-2008 04:24 PM
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

How can I read/write data files (text file) from PL/SQL Script

I had an oracle forms pl/sql program to read/write a data file (text file). When this code is run on a command line as a PL/SQL script using the SQL*Plus I am getting an error:
-- sample.sql
DECLARE
vLocation                VARCHAR2(50) := 'r:\';
vFilename                VARCHAR2(100) := 'sample.dat';
vTio                   TEXT_IO.FILE_TYPE;
vLinebuf               VARCHAR2(2000);
vRownum               NUMBER        := 0;
-- use array to store data FROM each line of the text file
TYPE           array_type IS VARRAY(15) OF VARCHAR2(100);
vColumn      array_type := array_type('');
PROCEDURE prc_open_file(p_filename IN VARCHAR, p_access IN VARCHAR2) is
BEGIN
    vTio := TEXT_IO.FOPEN(vLocation||p_filename,p_access);
EXCEPTION
    WHEN OTHERS then
      -- raise_application_error(-20000,'Unable to open '||p_filename);
      message(sqlerrm);pause;
END;
PROCEDURE prc_close_file is
BEGIN
    IF TEXT_IO.IS_OPEN(vTio) then
       TEXT_IO.FCLOSE(vTio);
    END IF;
END;
BEGIN
--extend AND initialize the array to 4 columns
vColumn.EXTEND(4,1);
prc_open_file(vFilename,'r');
LOOP
      LTEXT_IO.GET_LINE(vTio,vLinebuf);
      vColumn(1) := SUBSTR(vLineBuf, 1, 3);
      vColumn(2) := SUBSTR(vLineBuf, 5, 8);
      vColumn(3) := SUBSTR(vLineBuf,10,14);
      Insert Into MySampleTable
      Values
        (vColumn(1), vColumn(2), vColumn(3));
      EXIT WHEN vLinebuf IS NULL;
   END LOOP;
   prc_close_file;
END;
SQL> @c:\myworkspace\sql\scripts\sample.sql;
PLS-00201: identifier 'TEXT_IO.FILE_TYPE' must be declaredIt works on the oracle forms but not on the SQL*Plus. Is there an alternative method using a PL/SQL script? A simple sample would help. Thanks.

Did you ever noticed the search box at the right side of the forum?
A quick search (limited to this years entries) brought up this thread for example
Re: UTL_FILE Examples

Lion server file sharing issue with windows API read/write ini file (GetPrivateProfileString)

Hello,
I try to config lion server as file server for a windows application we use at work. All other computers are windows 7 or XP, lion server is the only mac. I choose lion server because it's size, quality and personal love of apple products.
10.7.2 lion server's samba file sharing works almost perfectly with all my windows machines, I can copy, delete, modify any text files or office files without any issue, but the most important windows application for my business doesn't work with samba file sharing. After some digging, I found it is because windows program can't read or write INI file stored on lion share. Windows API GetPrivateProfileString always returns empty if the INI file is store on lion share.
You can download a small application for read/write windows INI file from codeproject.com to test this problem:
http://www.codeproject.com/KB/files/ini.aspx
I can open/edit the in file using any text editor without any problem. The only problem is with those windows APIs. ACL is turned on for my lion share and assigned "delete" rights to samba users.
I install samba3 on the same server; it works perfectly with windows API. My windows program also works. Looks like there is something wrong with lion server's sambax.
I'd prefer to use built-in samba even I have samba3 working. Built-in samba is very immature right now, but considered how young it is, I will give apple some time to make it mature.
Does anyone have same issue or knows how to fix it?
Thanks,
Michael.

All the memory is fine. The server rarely if ever goes down when there are only around 10-12 users connected. When there are 20+ users connected and working heavily it goes down often. When I say working heavily, I mean they are transferring huge files to the SAN (100GB+), sometimes 5 at a time per user, and there are a bunch of others who are reading large video files at a minimum of 220MB/sec from the SAN.
Though this worked on Snow Leopard without any issues, Lion just doesn't seem to be able to handle it. The odd thing is, on Snow Leopard there was only a single 1GB ethernet connection to a NAS system, whereas with Lion we have a much more powerful machine with a 6-port 10GB ethernet card and a 4 lane 8GB fiber card to a true SAN. You would think that the newer scenario with Lion would handle far more users with ease.
So far, very disappointing with regards to Lion's file serving performance.

Read-Write ABF-Files

Hello!I wish to write the program allowing to read and write abf files. For this purpose on a site http://www.moleculardevices.com/home.html has downloaded library dll - Axabffio32.dll. The problem following - how with Call Library Function Node to describe function ABF_ReadOpen:
#include "abffiles.h"BOOL ABF_ReadOpen( char *szFileName, int *phFile, UINT uFlags,ABFFileHeader *pFH, UINT *puMaxSamples,DWORD *pdwMaxEpi, int *pnError );Opens an existing ABF data file for reading. Reads the acquisition parameters from the file header into the passed ABFFileHeader structure.Parameter szFileName Name of data file to open. phFile Pointer to ABF file handle of this file. uFlags Flag to indicate whether file is parameter file or not. pFH Pointer to acquisition parameters read from data file. puMaxSamples Pointer to requested size of data blocks to be returned. pdwMaxEpi Pointer to number of sweeps that exist in the data file. pnError Address of error return code. May be NULL.
The ABF_ReadOpen function opens the data file szFileName, allocates an ABF file handle for it and assigns this number to *phFile. Data is read from the file header into *pFH. If ABF_PARAMFILE is set in uFlags then no further processing is performed, otherwise internal buffers are allocated in preparation for file reading.For ABF_GAPFREEFILE and ABF_VARLENEVENTS files, *puMaxSamples is passed in as a requested maximum size of the blocks of data returned by the ABF_ReadMultiplex and ABF_ReadChannel routines. For all modes, the actual value that will be used is returned in this location.For Event Detected modes, on calling ABF_ReadOpen, the parameter pdwMaxEpi points to a the maximum number of sweeps to read from the file. If it is zero the maximum will be 8192 sweeps, depending on RAM availability. The total number of data blocks of the size returned in *puMaxSamples is returned in *pdwMaxEpi.
I try do it as
int8_t ABF_ReadOpen(CStr *szFileName, int16_t *phFile, uint16_t uFlags, int32_t *pFH, uint16_t *puMaxSamples, int32_t *pdwMaxEpi, int16_t *pnError );
But it's not working.
Thanks.

Hello!I wish to make record abf-files, therefore variants of the program which has sent srikrishnaNF me do not arrange.I have decided not to work with dll, and have found as is written abf a file as bytes. As it is told in the description the data are written in a format "as multiplexed two-byte binary integers". What does it mean? I have written the program which reads out on two bytes from a file and translates them in type single, but I do not find numbers which are written in a file (read this value with OriginLab).
Attachments:
Search value.vi ‏101 KB
ABF Structure.JPG ‏158 KB
Data Structure.JPG ‏142 KB

Read/Write App Files Under Limited User Account

Hi All,
My desktop app is intended for Windows only. I'm writing files to the hard disk to store app specific configuration.
The applications main data source is a ZIp file that consists several XML files. The user can store this ZIP anywehre they like and the application will extract the necessary files to a temp dir so that it can read in data.
When logged into a PC as either an Administrator or Power User, I am able to read write my config files and extract XML files from the ZIP with no problem.
When logged in as a user with "limited" access, I can only read and write the config files. But when I go to extract any XML files from the ZIP, it seem to get denied due to insufficient permissions.
The working directory for storeing all these files is: C:\Documents and Settings\<USER NAME>\Application Data\<MY APP>\
Don't users with limited access have full read/write permissions to their own home directory?
If not, what can be done to give them full read write access? Is there perhaps some other location I should be using?
Also, would code signing from some place like Verisign do any good?
I'm targeting Windows 2000/XP.
Thanks in advance.
Regards,
Jim

You can also access the user folder through the registry:
     public static final String APP_DATA_FOLDER_CMD = REG_QUERY_UTIL
          + "\"HKCU\\Software\\Microsoft\\Windows\\CurrentVersion\\"
          + "Explorer\\Shell Folders\" /v AppData";
      * Gets the current user Application Data folder path defined in the
      * registry.
      * @return The current user Application Data folder path.
     public static String getCurrentUserAppDataFolderPath()
          return queryREG_SZ(APP_DATA_FOLDER_CMD);
      * Performs the query in the registry for the specified value type.
      * @param queryString The query to be performed.
      * @param valueType The value type.
      * @return The value data for the specified value name in the registry.
     public static String queryREG_SZ(String queryString, String valueType)
          try
               Process process = Runtime.getRuntime().exec(queryString);
               StreamReader reader = new StreamReader(process.getInputStream());
               reader.start();
               process.waitFor();
               reader.join();
               String result = reader.getResult();
               int p = result.indexOf("REG_SZ");
               if (p == -1)
                    return null;
               return result.substring(p + valueType.length()).trim();
          catch (Exception e)
               return null;
     }This will get you the user directory from the registry. However, my issue is
that the value returned was:
C:\Documents and Settings\<USER NAME>\Application Data
Which is great, but that folder didn't exists on my computer. I cannot find
any documentation to say why it would be there. Except I had no Application
Data folders under any user. I have XP.
So when running the program on one computer, I had no valid folder to write
to and it wouldn't let me create it. Said the <USER NAME> folder could not
be written to. canWrite() returned false and the directory could not be
created.
On another computer, I had the Application Data folder, the canWrite()
returned false, yet I was able to create a folder and file inside.
I checked the default <ALL USERS> directory and the Application Data folder
did not exist there.
I don't understand how I am supposed to work around it...
If the folder doesn't exist, I need to be able to create it, whether it's in the
<ALL USER> or <USER NAME> folder.
I guess I am counting on the canWrite() to be accurate. Yet it appears that
I cannot rely on the canWrite() since a false was returned. I wrote!!
So confused ... need to be able to write to this folder on any computer...
Help!!

Unable to read/write Windows files on mac anymore

Today, out of much extreme panick as of a false alarm, i had installed MacFUSE, an application used so you can read and write windows files on your mac side. What i didn't know is that i already had NTFS-3G, one which could already do that. I uninstalled MacFUSE instantly (removed pane from system preferences), now i still can't see windows mounted on my mac desktop. When i boot up, i get an error; below. If i choose to manually mount it from the disk utility i get the same error. I'm not sure where to post this type of stuff since it's not really apple related but it's worth a shot.

I've had that same issue with NTFS-3G and Fuse. I ended up getting Paragon NTFS for Mac. Its about 20 bucks, but it works great. IMHO, this is a feature Apple should build into OS X especially since they have a feature such as Boot Camp

Read&write Excel file using java

Hi everybody,
I have an assignment about methods that read and write an excel file using java (Eclipse SDK), so if anyone know about that please post the solution as soon as possible.
Thanks
Sendbad

http://onesearch.sun.com/search/onesearch/index.jsp?qt=read+write+excel&subCat=siteforumid%3Ajava31&site=dev&dftab=siteforumid%3Ajava31&chooseCat=javaall&col=developer-forums

Read/Write text files in LabVIEW

We have developed an instrument control and data acquisition system for a mass spectrometer using LabVIEW FPGA. Currently we have 6 counters on the FPGA, counting for 1 second intervals and transferring data to the host using a FIFO.
The data, as a local variable, is used in several different parallel loops on the host. One of these is coded to write the data to a text file. Unfortunately everything we have tried has failed. It is proving impossible using either the write to file VI provided with labVIEW, or to use the Open file, write and close file utilities. Each attempt has failed. Yet when running a dummy code we can write to files. The dummy code consists of 6 random number generators running in one loop and the write to file VI in a second loop. The random numbers are transferred across the loops as local variables.
Can anyone offer any advice as to what we might be doing wrong. We're beginning to feel as though we are banging our heads against a brick wall and getting very frustrated.
Many thanks in advance for any suggestions.

Hi Paul,
you neither say, what is failing nor do you show any code... How should we help then?
"impossible using ... the write to file VI"
Well, usually they work just fine.
"Each attempt has failed."
In which way? Error number given? Did you use the debuging tools, like probing, breakpoints and highlighting?
"as local variables."
It seems you're not properly do program "real" LabVIEW code
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Could not read my LVM file

Hi Everyone
I have created this LVM file after acquiring my signal. Right now i have a problem of extracting data from this LVM file. For example data from cell B24 to J24.
I have not experienced anything like this because it should be relatively simple. I have used loops and some methods to extract the data but it return me value of NaN or some other number. I do not know what is happening.
The attached file is the LVM that i created. Please help me on this ,thank you
PX
Solved!
Go to Solution.
Attachments:
12143_0005_Fri_ 12 Mar_ 2010.zip ‏381 KB

Use the Express VI to convert from the dynamic data type to a 2-D array. Then index out the appropriate column of your array.
You may also want to check the integrity of your data. In your file, the first row of data is pretty full. Later rows have numerous blank columns before and after 4 columns of data.
When I ran the attached VI snippet, I noticed it imported the data, but the columns of the other rows did not align with the first full row in the same way they do when I viewed your file in notepad. You will get a lot of NaN's for wherever your data is blank.
Message Edited by Ravens Fan on 03-13-2010 11:57 AM
Attachments:
Example_VI_BD.png ‏49 KB

Read / Write Excel file using package dbms_util and util_files

hi,
i am beginner to this so please elaborate the answer more concisely

there's a ton of reading on this subject on google my friend.
http://www.google.co.uk/search?hl=en&source=hp&biw=954&bih=517&q=plsql+read+write+excel&btnG=Google+Search&aq=f&aqi=&aql=&oq=plsql+read+write+excel
and check the forum faq, there's a topic on excel in here:
SQL and PL/SQL FAQ
Edited by: smon on Mar 2, 2011 3:39 AM

Read/write external file from remote location

hi all,
due to more concern about storage, we are storing some pdf/doc/jpg files in remote location, we need to write/read that files without storing in the database,
the files would be external file. is there any procedure to do so,
thanks in advance
pa1

sachinpawan wrote:
hi all,
due to more concern about storage, we are storing some pdf/doc/jpg files in remote location, we need to write/read that files without storing in the database,
the files would be external file. is there any procedure to do so,
thanks in advance
pa1The database can only deal with files that reside on disk that is mounted to the OS that is hosting the database.

Read & write lvm files

Similar Messages

Maybe you are looking for