Read/write permissions error message

Hello everybody,
I have recently upgraded to Logic Studio from LE8. Now, I am into manual reading and all that stuff, but there are a couple of issues that confuse me at the moment.
1) I am not able to edit an audio file that I created by recording an external instrument using Logic. When I try to use Factory functions in Sample Editor these appear to be faded.
2) The following message appears when I try to refresh audio file information in Audio Bin:
"The read/write permission of only one access path to a file can allow writing
Result code = -49
File = <filename>"
PS: I haven't had these issues when using LE8.

Ok, I fixed both issues by applying the same privileges to the folder (and its contents) where my Logic projects are, including LE projects. Just right-clicked the folder name, selected "Get Info" -> "Sharing & Permissions" -> defined permissions -> selected "Apply to enclosed items" from the drop menu at the bottom of the Info window.

Similar Messages

HT2237 what is Error code -8076 get it when changing read/write permissions on an iTunes music folder. I did google it but could not find

get it when changing read/write permissions on an iTunes music folder. I did google it but could not find anything???

get it when changing read/write permissions on an iTunes music folder. I did google it but could not find anything???

Is it possible to change the read/write permissions on a time machine back-up of iTunes? I need to restore it, but old version is locked....

Is it possible to change the read/write permissions on a time machine back-up of iTunes? I'm needing to restore it as my phone deleted half our playlists during sync & am not seeing a way to unlock the permissions. I have the current version unlocked, but can't seem to get the backed-up version. When I click on restore I get a pop-up that says iTunes can't be deleted as it is part of the OS. I'm not even trying to delete, just restore the old version. Any suggestions?

Hmmm, ok I'll give it a shot. I've always had the iTunes sync w/ my phone set up to only load selected playlists to the phone b/c there's a lot more in iTunes than I have room or desire for on my phone. A few months back I started having trouble w/ trying to sync everything & subsequently adding more to the phone than it could hold. The quickest thing at the time was to unclick the sync music option in iTunes so I could still backup the phone to the computer & not have a problem.
When I asked about it during one-to-one session shortly after, they advised me to delete the music off my phone & then re-sync it to the computer, run a backup of the phone & redownload the music to the phone. When I tried this it ended up deleting all my playlists (but not my husband's) from iTunes. Irritating, but I've been rebuilding the playlists since. I had also unclicked sync music again & an Apple person told me the most likely best fix was to delete & reload iTunes completely.
A few days ago I realized I hadn't backed up the phone to the computer in over a month so after deleting & reinstalling iTunes, & w/o changing anything (sync music was STILL unchecked) I ran a backup & my phone went from having 4 GB free space to being 2 GB over capacity due to iTunes trying to download the entire music library to the phone. I made a one-to-one appt again & it was suggested AGAIN that I delete all the music off my phone & then resync it to the computer & redownload the music. We did this (though a few random songs that had previously been purchased somehow remained on the phone), I got home, connected the phone & instead of the music that shows as 'on my device' disappearing from iTunes it just sat there, so, as the guy had told me I MIGHT have to do, I threw all those songs showing in iTunes as being on my phone, in the trash so that it was completely clear.
At this point I checked sync music, made sure the options were 'selected playlists only', checked the ones from my own list that I wanted (I usually have one playlist of comedians from my husband's folder that I also have on the phone, but didn't check it at this point). It uploaded all my stuff just fine, but for whatever reason when it saw that I wasn't uploading that comedy playlist any longer, it not only didn't upload it but proceeded to delete my husband's entire folder of playlists from iTunes. -_- I got on the phone w/ an Apple support person right away but he wasn't able to tell me anything .. basically said we'll have to rebuild everything. I asked about the possibility of using time machine, he said he's not qualified to answer that, so that's when I started looking around online & found, among others, the link I referenced a couple replies ago.
I hope this all makes sense. It's been a long-term issue so I'm trying to go from memory as I figured to begin w/ that I had just made a mistake somewhere, so didn't try to document anything. Now w/ it having happened a 2nd time, I'm not sure if it was 'user error' or something else.......

Can't update photos using iPhoto 6 - read/write permissions

Help!
Before you think this is the standard "iPhoto 6 permissions problem", please read on.
Upon installing iPhoto 6 and attempting to update my iPhoto Library, I get the dreaded "There is a problem accessing...files in your iPhoto Library folder...Make sure you have read and write permissions for the folder...all enclosed items." This is the problem noted in:
http://docs.info.apple.com/article.html?artnum=303135
However, it doesn't tell me what file(s) have the problem, even though the app note says it would for OS 10.3.9. No matter. I simply first did a get info on the iPhoto Library folder verified that it was not locked and that I had read/write permissions. I also applied that to everything inside the folder. Ran iPhoto again...same error.
Although I didn't get the "repair permissions" error, I did that too. Ditto for the locked files issue reported at:
http://docs.info.apple.com/article.html?artnum=303232
After attempting the update at least a dozen times, I even tried the UNIX chmod command (774) on everything in the iPhoto Library folder just in case the "get info" method didn't take. Still get the same error when updating iPhoto 6. What gives!
I willing to try any suggestions ya'll might have!
FYI - I do have my older version of iPhoto available and I have a complete backup of my iPhoto Library.
Thanks!
david

Hi David,
It's up to you, unless someone else comes along with some more things to try.
I am assuming you still have a version 5 of the iPhoto Library folder in the Finder.
Rename it to iPhoto Library_old and drag it to the desktop.
Do a search in the library for Thumbs. this will find all the Thumb folders which you do not want to import into the new Library. Delete those Thumb folders.
Now you have to decide if you want to import both the Original and Modified versions of a photo, or just the Originals. The problem is, if you import both, they will no longer be linked but will show up as separate photos in the library.
Actually it is going to be a big pain unless you have just the photos backed up to reimport.
If you want, you can check out a page I made showing the manual way to import the photos (#3)
http://homepage.mac.com/loridilo/iPhoto5help/Personal22.html

Error -61 with FTP Write permissions error; Not a publisher

Hi,
I am trying to use Safari to FTP with my schools server (FreeBSD) but when I try to delete something I get error -61 which is FTP Write permissions error; Not a publisher. When I select "Get Info" I see the permissions say "You can only read". How can I fix this?

Hi Rob
so far as I know, Safari and/or Finder can only read from ftp sites - hence the response you are seeing.
I've used http://cyberduck.ch/ for a few years - there are many other free/sharewware ftp clients

Write permission error message when I try to 'save image' from elements 12 raw camera to main editing section?

I get a 'write permission error' message when I try to 'save image' from Raw Camera sector to the main editing section of Elements 12. How can I overcome this problem?

Well, first of all Save Image doesn't have anything to do with moving a raw file into the regular editor. That's the DNG converter. Evidently you are trying to create a dng file in a place where you don't have permission to write. Take a look at the location and change it to someplace where you can write. An example would be opening a file that's on a disc and trying to save back to that disc.
But you should still be clicking the Open button instead of the Save Image button if you want to do anything other than make a DNG file.

Liquify tool says write permissions error, how do i fix?

Liquify tool is the only thing I can't seem to use in Photoshop so far, it gives me a write permissions error...why? My permissions are set to read & write...

HI I have this same problem. I uninstalled Photoshop CC and Photoshop CC 2014, reinstalled the latest Photoshop CC 2014 and now I am unable to use the liquify tool because I do not have "permission." I went in and double check that I have read and write permission, as well, I changed everyone to read and write permission and I still cannot use liquify. Help would be appreciated as no one from Adobe has contacted me even though I was promised a phone call yesterday.

Granting read/write permissions on Oracle Server processes

Hi
I'm trying to set up a BFILE datatype in a table. I have created the directory and the current user has permissions to read and write to that folder. (The current user has the create any directory permission granted). The insert statement does not give an error but when I look at the table the BFILE column contains an error of <Value Error>.
I suspect it may be because the current user does not have server read/write permissions on the directory I'm using. Can anybody help me with a correcting this please?
Here is what I've used so far:
CREATE or replace DIRECTORY pic_dir AS 'c:\temp'
INSERT INTO picture (pic_id, filename)
VALUES (1, bfilename('pic_dir', 'image1.jpg'))

Many thanks for the reply.
I am using the procedure as below (formats better if copied into Notepad). Gives me an error of "ORA-22285: non-existent directory or file for FILEOPEN operation" referring to the line containing the DBMS_LOB.FILEOPEN command.
I suspect there is something wrong with the SELECT statement because I can get the procedure to run fine on the text file if I provide the BFILE location directly into the bfile_loc variable (as opposed to using the SELECT statement to retrieve it from the db).
I created a directory: CREATE OR REPLACE DIRECTORY pic_dir AS 'C:\temp'
I then created a table: CREATE TABLE picture (pic_id NUMBER, filename BFILE)
Next I added a row: INSERT INTO picture VALUES(1, BFILENAME('pic_dir', 'testfile.txt'))
CREATE OR REPLACE PROCEDURE read_bfile IS
sep_char CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(32));      --separating character (space)
end_file CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(10));      --end of file character (new line)
bfile_loc BFILE;                               --pointer to BFILE
cur_pos NUMBER := 1;                          --current position in file
char_read BINARY_INTEGER := 0;                     --number of characters read
read_buff VARCHAR2(500);                          --read buffer
end_word NUMBER;                              --end of current word
ret_val BOOLEAN := FALSE;                         --return value
BEGIN
select filename into bfile_loc from picture where pic_id = 1;
DBMS_LOB.FILEOPEN(bfile_loc, dbms_lob.file_readonly);
LOOP
-- establish end of current word
end_word := DBMS_LOB.INSTR(bfile_loc, sep_char, cur_pos, 1);
-- process end-of-file
IF (end_word = 0) THEN
end_word := DBMS_LOB.INSTR(bfile_loc, end_file, cur_pos, 1);
char_read:= end_word - cur_pos - 1;
DBMS_LOB.READ(bfile_loc, char_read, cur_pos, read_buff);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(read_buff));
EXIT;
END IF;
-- read until end-of-file
char_read:= end_word - cur_pos;
DBMS_LOB.READ(bfile_loc, char_read, cur_pos, read_buff);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(read_buff));
cur_pos := cur_pos + char_read+ 1;
END LOOP;
DBMS_LOB.CLOSE(bfile_loc);
END;

Can't change read-write permissions on DMG despite ownership

Hey there! So, I recently followed these instructions to create a 20 megabyte, 128-bit encrypted DMG on my hard drive in order to password-protect some confidential documents. I have had no problems opening the DMG or editing its contents, but today I discovered that I am unable to add, delete, or edit its contents, as I receive the following message: "The document "___" could not be saved as "___". The volume “Encrypted” is read only."
I'm able to mount the DMG and open the document, but I can't make any changes. First, I tried changing the permissions on the document itslef; I went to "Get Info," but I discovered that the Sharing & Permissions indicates I (the admin) should be able "Read & Write." I wanted to to tinker with this, so I clicked the lock icon at the bottom of Info and entered my password, but--mysteriously--I can't change the permissions settings, even when unlocked. I click, but nothing happens.
Same thing when I try to change permissions for the whole DMG. It says that I have "Read & Write" permissions, but I can't try messing with these settings even after unlocking.
Now, it's possible that at some point in the last couple of weeks I may have changed the setting of the document to "locked"--I honestly can't remember--but shouldn't I still be able to "unlock" it given my admin status? And even if I compromised that one file, why can't I save any new documents to the DMG?
Any ideas as to how I can return my DMG to true read-write status?
Thanks ever so much!
embr

Okay, so I figured it out, and it was an "Oh, duh!" moment. Figured I should explain for anyone else experiencing this problem.
The DMG was locked, but I couldn't see this or change it while it was mounted. So, if you encounter this problem, simply eject the disk, then navigate to its location in Finder, Get Info, and uncheck the "locked" option. That did the trick for me!
embr

How do you create default Read/Write Permissions for more than 1 user?

My wife and I share an iMac, but use separate User accounts for separate mail accounts, etc.
However, we have a business where we both need to have access to the same files and both have Read/Write permissions on when one of us creates a new file/folder.
By default new files and folders grant Read/Write to the creator of the new file/folder, and read-only to the Group "Staff" in our own accounts or "Wheel" in the /Users/Public/ folder, and read-only to Everyone.
We are both administrators on the machine, and I know we can manually override the settings for a particular file/folder by changing the permissions, but I would like to set things up so that the Read/Write persmissions are assigned for both of us in the folder for that holds our business files.
It is only the 2 of us on the machine, we trust each other and need to have complete access to these many files that we share. I have archiveing programs running so I can get back old versions if we need that, so I'm not worried about us overwriting the file with bad info. I'm more concerned with us having duplicates that are not up to date in our respective user accounts.
Here is what I have tried so far:
1. I tried to just set the persmissions of the containing folder with us both having read/write persmissions, and applied that to all containing elements.
RESULT -> This did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
2. I tried using Sandbox ( http://www.mikey-san.net/sandbox/ ) to set the inheritance of the folder using the methods laid out at http://forums.macosxhints.com/showthread.php?t=93742
RESULT -> Still this did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
3. I have set the umask to 002 ( http://support.apple.com/kb/HT2202 ) so that new files and folders have a default permission that gives the default group Read/Write permissions. This unfortunately changes the default for the entire computer, not just a give folder.
I then had to add wife's user account to the "Staff" group because for some reason her account was not included in that. I think this is due to the fact that her account was ported into the computer when we upgraded, where as mine was created new. I read something about that somewhere, but don't recall where now. I discovered what groups we were each in by using the Terminal and typing in "groups username" where username was the user I was checking on.
I added my wife to the "Staff" group, and both of us to the "Wheel" group using the procedures I found at
http://discussions.apple.com/thread.jspa?messageID=8765421&#8765421
RESULT -> I could create a new file using TextEdit and save it anywhere in my account and it would have the permissions: My Username - Read/Write, "Staff" or "Wheel" (depending on where I saved it) - Read/Write, Everyone - Read Only, as expected from the default umask.
I could then switch over to my wife's account, open the file, edited it, and save it, but then the permissions changed to: Her Username - Read/Write, (unknown) - Read/Write, Everyone - Read Only.
And when I switch back to my account, now I can open the file, but I can't save it with my edits.
I'm at my wits end with this, and I can believe it is impossible to create a common folder that we can both put files in to have Read/Write permissions on like a True Shared Folder. Anyone who has used windows knows what you can do with the Shared folder in that operating system, ie. Anyone with access can do anything with those files.
So if anyone can provide me some insight on how to accomplish what I really want to do here and help me get my system back to remove the things it seems like I have screwed up, I greatly appreciate it.
I tried to give as detailed a description of the problem and what I have done as possible, without being to long winded, but if you need to know anything else to help me, please ask, I certainly won't be offended!
Thanks In Advance!
Steve

Thanks again, V.K., for your assistance and especially for the very prompt responses.
I was unaware that I could create a volume on the HD non-destructively using disk utility. This may then turn out to be the better solution after all, but I will have to free up space on this HD and try that.
Also, I was obviously unaware of the special treatment of file creation by TextEdit. I have been using this to test my various settings, and so the inheritance of ACLs has probably been working properly, I just have been testing it incorrectly. URGH!
I created a file from Word in my wife's account, and it properly inherited the permissions of the company folder: barara - Custom, steve - Custom, barara - Read/Write, admin - Read Only, Everyone - Read Only
I tried doing the chmod commands on $TMPDIR for both of us from each of our accounts, but I still have the same behavior for TextEdit files though.
I changed the group on your shared folder to admin from wheel as you instructed with chgrp. I had already changed the umask to 002, and I just changed it back to 022 because it didn't seem to help. But now I know my testing was faulty. I will leave it this way though because I don't think it will be necessary to have it set to 002.
I do apparently still have a problem though, probably as a result of all the things I have tried to get this work while I was testing incorrectly with TextEdit.
I have just discovered that the "unknown user" only appears when I create the a file from my wife's account. It happens with any file or folder I create in her account, and it exists for very old files and folders that were migrated from the old computer. i.e. new and old files and foders have permissions: barara - Read/Write, unknown user - Read Only, Everyone - Read Only
Apparently the unknown user gets the default permissions of a group, as the umask is currently set to 022 and unknown user now gets Read Only permissions on new items, but when I had umask set to 002, the unknown user got Read/Write permissions on new items.
I realize this is now taking this thread in a different direction, but perhaps you know what might be the cause of this and how to correct or at least know where to point me to get the answer.
Also, do you happen to know how to remove users from groups? I added myself and my wife to the Wheel group because that kept showing up as the default group for folders in /Users/Shared
Thanks for your help on this, I just don't know how else one can learn these little "gotchas" without assistance from people like you!
Steve

My MB Pro is no longer syncing my iPad in iTunes. It did in the beginning, however I had to change my MB Pro password. Now I get a permissions error message trying to sync: "error storing your authorization information on this computer." Can you help?

My MB Pro is no longer syncing my iPad in iTunes. It did in the beginning, however I had to change my MB Pro password. Now I get a permissions error message trying to sync: "error storing your authorization information on this computer." Can you help?

First I would just try deleting the SCInfo folder, restart your computer, open itunes and see if you are still getting the error, at that point if you are it is a permissions error with the computer specificaly and not in itunes.
http://support.apple.com/kb/TS1389
that is for deleting the scinfo folder. scroll to the bottom of the article and the steps are there

Trying to download latest Adobe Reader - keep getting error message

Trying to download latest version of Adobe reader keep getting error message telling me that the file contains a virus - then it just shuts down

Hi neilthueel
Please try to download from Adobe Reader : http://get.adobe.com/reader/otherversions/
Regards,
Deepak

I need to copy a file over to my mac from a CD but it won't let me due to read write permissions. is it possible to get around this?

i need to copy a file over to my mac from a CD but it won't let me due to read write permissions. does anyone know of a way to get around this?
any assistance will be much appreciated

i need to copy a file over to my mac from a CD but it won't let me due to read write permissions. does anyone know of a way to get around this?
any assistance will be much appreciated

FM to read only system error message

Hi,
I want to read only system error messages.
Is any FM available to read only system error messages.
Thanks,
Anil
Moderated: Please use the search before posting. See The SCN Rules of Engagement
Discussion is locked.
Message was edited by: Andrei Vishnevsky

Hi Shiva,
Currently the standard restart job RSXMB_RESTART_MESSAGES is restarting below statuses.
You can copy the report to Z program and change the above code to below then the report will only restart system errors only.
Regards,
Praveen.

Capture error message and write the error message to file

Anyone know that how to caputre the error message which is generated in a scope catch? and then write the error message to file?
Thanks a lot!!

Hi,
Please try the following:
1. Double click on the newly created catch activity (denoted by an ‘!’ symbol
on it)
2. In the General Tab, Click on the ‘Browse Faults’ icon (denoted by a torch
symbol)
3. A fault chooser window opens, (Eg. Expand partner links->CreditRatingService
-> CreditRatingService -> FaultNegativeCredit)
4. Create a variable (Eg. Fault1_NegativeCredit) in the Fault chooser window to store this value.
5. Create a partner link, configured as a file adapter. (Specify your output file in this file adapter wizard)
6. Invoke this partner link and pass the 'Fault1_NegativeCredit' variable to that partner link
I hope you are aware of the terms I used, the steps are just guide lines. practically, u need to do a few more steps. Please refer the BPEL tutorials on exception handling and file adapters. that will help you...
best regards
Message was edited by:
hem chand

Read/write permissions error message

Similar Messages

Maybe you are looking for