Read Xml file for Sender and Receiver Info

Hi
Is it possible to customize B2B to read Sender/Receiver/Document Information from the xml file which is supposed to be transmitted?
I do NOT the option to specify this information in channel configuration under file name since file name will not have this information.
But I am fine with writing any plug to set this information somewhere to achieve the same.
Regards
Punit

For outbound transactions, file name is the only option available currently if you are using Generic File internal listening channel. You may use any other transport like JMS/AQ/Fabric and partner and document information can be set in headers.
Can you let us know the complete use case?
Regards,
Anuj

Similar Messages

File Adapter - Reading 2 files from sender and one file to receiver

All - I am looking for a best solution for reading two files from sender and generating one file to the receiver.
Here is the scenario
Sender file s - A is a master file. B is a detail file; B will have a one to many records for each record of File A.. that is the relation ship between 2 files.. I am looking for a better solution to
Example
Input:
File A will have a record like "summary1 ABC 1234"
File B will have a record like "Detailfor Summary1 CDF 8679"
Output:
File C shall have a record "consolidatedofSummary&Detail ABC 1234 8679"
1) read records of master row and detail row from these 2 files
2) do the mapping to the receiver output format which it is creating for records with some harcoded values and based on the values from master and detail rows of sender file
if I can accomblish reading sender files and do the mapping to the receiver , assume that mapping to the receiver format would not be cumbersome.
please help me...
Thanks

Hi Gopal,
Ur approach to the interface is perfect.... Go ahead.
For selecting multiple files in source use Advanced Selection for files.. and specify the directory paths and also the file name shema...
This will fetch the 2 files into the integration engine... then u map the 2 source files to one target file(2:1 mapping).
Specify accordingly the receiver side FCC and test it end to end...
If u face any prblm post here... some1 will help u out..
Babu

Prerequisites for Sender and Receiver FTP adapter

Hi Experts,
I am new to PI and configuring simple file to file scenario. I need to know the prerequsites for sender and receiver FTP adapter. Scenario is System A -> XI -> System B .
What I want to know is:
1> What ports need to be opened?
2> Any service that I need to activate?
3> Do I need to install FTP server in any of the machine?
If I have missed something, please add.
Br,
Nilz

Hi,
1> What ports need to be opened?
mentioned in below link as said its 21.
2> Any service that I need to activate?
No
3> Do I need to install FTP server in any of the machine?
THere are two ways by which u can pick ur file.
1) NFS by which u can put the file on XI appplication directory and pick up ur file.
2) FTP u have to put ur file on FYP server and XI will pick up the file from there. U can use freeware FTP and install it on ur Desktop search on goolge u will get ti FTP installtion.
refer the below configuration requirement for FIle adapter.
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
ALso refer the end to end file to file scenario.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
chirag

My phone number is not coming up as an option for sending and receiving imessages

My phone number is not coming up as an option for sending and receiving imessages

You do not have a "phone number". Your ipad has a cellular access number and can't make phone calls.
You must use your apple ID email for imessage and FaceTime on iPad.

COPA: how to identify which cost element for sender and receiver in IMG

Hi Guru,
I know my cost element for sender and receiver from the settlement document, but where in IMG, i can identify how it settup to use which cost element for my sender - order , which cost element should be used for my reciever profit segment.
Thanks,
Kick

Hi,
Go to KEI1
Select your transfer structure
double click on assignment lines
check the source and value fields to get the mapping.
Regards,
Sridevi
Pls. assign points, if useful

TS3276 I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.

I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.

Open System Preferences > Sound > Sound Effects
Select: Play user interface sound effects
And make sure the Mute box is not selected.
Now open Mail. From the Mail menu bar clik Mail > Preferences then select the General tab.
Make a selection from the: New messages sound pop up menu.

Please..how to instal libero mail on mi Ipad. I need the parameter for send and receive mail..Thanks

Please..how to instal "libero" mail on my Ipad. I need the parameter for send and receive mail..Thanks

FYI: POP will by default, delete messages from the server after downloading them (This applies to most pop clients, computer or mobile). POP is old tech and is not recommended if IMAP or Exchange are available. The default when setting up a g-mail type account is IMAP. Full synchronization with the server. You may also be able to set it up as an Exchange account, allowing for push e-mail and sync of calendars and contacts as well. See the Gmail help pages for instructions.

Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

Hello Nikkii,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Troubleshooting telephone-number activation (iPhone only)
After each step, toggle FaceTime and iMessage off and then on in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that your iPhone is set to the correct time zone. Tap Settings > General > Date & Time.
Note: If Set Automatically is on but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
Verify that you can send SMS messages. You need a valid SMS messaging plan to activate FaceTime.
Contact your carrier to verify that there are no restrictions or blocks on text messages. Blocks on text messaging will prevent iMessage and FaceTime registration.
If you are unable to activate iMessage or FaceTime on a device after remote wiping it, wait at least 24 hours and try again.
If "Waiting for Activation" is displayed, leave FaceTime and iMessage enabled for 24 hours. Toggling FaceTime or iMessage off and on will cause the registration process to start over.
Best of luck,
Mario

FAX machine with Manual function & option to connect PC for Send and receive

Nearly every MFD out there has these capabilities. I know the Ricoh, Konicaminolta, and the Kyocera can do this. The larger machines the fax needs to be installed as an option. Once installed you have walk up fax, scan to PC, Scan to e-mail, Fax forwarding to PC, or e-mail and if the driver is installed you can fax from your PC through the copier.

Hi to the Community
We have a requirement of FAX machine which should fulfill
our below requirements
Manual mode for sending and receiving Fax as Traditional
Second option required is it can be connected to PC so that
fax can be sent and receive directly from computer as well
I know to set up windows fax option to fulfill the second
requirement, but we need both options
If anyone knows a specific model, kindly let me know
This topic first appeared in the Spiceworks Community

Different Ports for Sender and Receiver?

For testing a tool it would be nice to run RTPSender and Receiver on the same computer. But here?s the problem. I run VideoTransmit and AVReceive2 (both from the Sun code samples) with the following parameters. VideoTransmit should send to IP A and to Port 22224. AVReceive2 should listen to packets from IP B and Port 22224. Now VideoTransmit sends from a random port, but Port 22225 is used on both computers for exchanging user information. Because of this it isn?t possible to run both on the same computer because both want to use port 22225 for a connection.
Is there a possibility to change this?

http://java.sun.com/products/java-media/jmf/2.1.1/apidocs/
RTPManager
http://java.sun.com/products/java-media/jmf/2.1.1/apidocs/javax/media/rtp/RTPManager.html
SessionManager-Depricated
http://java.sun.com/products/java-media/jmf/2.1.1/apidocs/javax/media/rtp/SessionManager.html
You can Send and Receive on one computer.
Can't remember the combo though.
It's one of
transmit 192.168.1.255 22222 //multicastIP port#
receive 127.0.0.1 22222 //localhost port#
or
transmit 192.168.1.100 22222 //computerIP port#
receive 127.0.0.1 22222 //localhost port#
There is the answer in these forums somewhere.
I just hate to see people struggle.

Is there a free app for sending and receiving pics for ipod touch

My friend just received an ipod touch. Looking for a free app for him to use to send and receive pics. Can you help me with this? We are dummies when it comes to technical things, so please keep it simple for me! lol

there is no official app for sharing pics with i device to i device but there is a rumour that you can do it from an app called ibluenova.

Reading XML file using BAPI and then uploading that xml file data into SAP

I am getting a xml file from Java server. I need to take
data from this file using BAPI and need to upload into SAP using SAP.
Please tell me how to read XML files using BAPI's.

SDIXML_DATA_TO_DOM Convert SAP data (elementary/structured/table types) into DOM (XML
SDIXML_DOM_TO_XML Convert DOM (XML) into string of bytes that can be downloaded to PC or application server
SDIXML_DOM_TO_SCREEN Display DOM (XML)
SDIXML_DOM_TO_DATA
data: it_table like t001 occurs 0.
data: l_dom TYPE REF TO IF_IXML_ELEMENT,
 m_document TYPE REF TO IF_IXML_DOCUMENT,
 g_ixml TYPE REF TO IF_IXML,
 w_string TYPE XSTRING,
 w_size TYPE I,
 w_result TYPE I,
 w_line TYPE STRING,
 it_xml TYPE DCXMLLINES,
 s_xml like line of it_xml,
 w_rc like sy-subrc.
start-of-selection.
select * from t001 into table it_table.
end-of-selection.
initialize iXML-Framework ****
write: / 'initialiazing iXML:'.
class cl_ixml definition load.
g_ixml = cl_ixml=>create( ).
check not g_ixml is initial.
write: 'ok'.
create DOM from SAP data ****
write: / 'creating iXML doc:'.
m_document = g_ixml->create_document( ).
check not m_document is initial.
write: 'ok'.
write: / 'converting DATA TO DOM 1:'.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
 EXPORTING
 NAME = 'IT_TABLE'
 DATAOBJECT = it_table[]
 IMPORTING
 DATA_AS_DOM = l_dom
 CHANGING
 DOCUMENT = m_document
 EXCEPTIONS
 ILLEGAL_NAME = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
check not l_dom is initial.
write: / 'appending DOM to iXML doc:'.
w_rc = m_document->append_child( new_child = l_dom ).
if w_rc is initial. write 'ok'.
else. write: 'Err =', w_rc.
endif.
visualize iXML (DOM) ****
write: / 'displaying DOM:'.
CALL FUNCTION 'SDIXML_DOM_TO_SCREEN'
 EXPORTING
 DOCUMENT = m_document
 EXCEPTIONS
 NO_DOCUMENT = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
convert DOM to XML doc (table) ****
write: / 'converting DOM TO XML:'.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
 EXPORTING
 DOCUMENT = m_document
 PRETTY_PRINT = ' '
 IMPORTING
 XML_AS_STRING = w_string
 SIZE = w_size
 TABLES
 XML_AS_TABLE = it_xml
 EXCEPTIONS
 NO_DOCUMENT = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
write: / 'XML as string of size:', w_size, / w_string.
describe table it_xml lines w_result.
write: / 'XML as table of', w_result, 'lines:'..
loop at it_xml into s_xml.
 write s_xml.
endloop.
write: / 'end of processing'.
end of code
Hope this will be useful.
regards
vinod

Can we use same Business Service for Sender and Receiver

Can we use same Business Service for Sender and Receiver

Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore

Same BS for sender and receiver comms

Hey pals,
can we use same BS for sender and reciever communication channels?!!
-Esha

Hello Esha,
You have to you 2 BS
One from where u hav to pick the file and the other one where you want to post it.
what is a Business system? What is use of creating it
Business System have an entry in the SLD and Buiness Service do not.
Business Systems are used when you are sending data to and from an R3 system and can be of ABAP, JAVA and Third Party Types.
Business System is a logical representation of a Technical System.
Business Service is a abstract representation of a System. For instance, www.google.com have a several system working together and IPs of this machines change eventually. When we use a Business Services like google we reference a computer that we don't know the phisical implementation.
Thanks,
Satya
Edited by: SATYA KUMAR AKKARABOYANA on May 15, 2008 5:51 PM

Message protocol is different for sender and receiver JDBC

In File adapter the message protocol can be either FTP or NFS for both sender as well as receiver. but for JDBC adapter the message protocol is JDBC and for receiver adapter the message protocol is XML SQL Format or native sql string only. Why this is different ? Why cant we use JDBC as message protocol for receiver also ?
I thought JDBC is the message protocol for JDBC adapters irrespective of whether they are sender or receiver. Can someone throw light on this ?

Hi,
You can find more about JDBC scenario at following links:
Configuring the Sender JDBC Adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm|http://help.sap.com/]
[http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm|http://help.sap.com]
Configuring the Receiver JDBC Adapter
[http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm|http://help.sap.com]
[http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm|http://help.sap.com]
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d36d51d-0b01-0010-b3aa-9cb313b63cf4|https://help.sap.com]
Regards,

Read Xml file for Sender and Receiver Info

Similar Messages

Maybe you are looking for