Read xml from url

Hello all,
I am trying to get the data from this particular url : http://api.openweathermap.org/data/2.5/weather?q=London&mode=xml
I have no problem to parse it directly from a .xml or in xml chain. But I can't read the data directly from labview or even save the file at the url under a .xml.
I already looked for the example like read http website and other but didn't succeed to adapt to my url.
If any of you can help me
thank you
Solved!
Go to Solution.

Both of these seem to work just fine here in LV 2011:
Note that the second one will require adding Datasocket support if you're building an installer and that the HTTP client VIs were only added around 2011.
Try to take over the world!

Similar Messages

  • Unable to read WSDL from URL

    This is my first web service. I thought I read that the
    service registers itself when first run, but it's just not jumping
    for me. I'd try registering it, but I'm not sure how to fill in all
    the blanks in the CF Administrator's Register Web Service form.
    I believe I'm doing this pretty plain and simple. Any ideas
    why this won't work? Tried both methods, both give the same error
    -- "Unable to read WSDL from URL"
    Calling URL:
    http://prod.trollsoftware.com/echotest.cfm
    Is looking at:
    http://prod.trollsoftware.com/trollws.cfc?wsdl
    which looks fine to me, but what do I know? This is my
    first....
    RLS

    I found this wonderful forum post
    {HERE}">http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=7&threadid=881689[/S
    and have been tyring to get it to run without removing the "/"
    mapping in case that would "break" something on my production
    server. I've tried hard to get Approach #2 to work as listed in
    that item, but to no avail. I can almost always see the XML code,
    but CF never wants to find it as an object reference.
    To answer your questions -- and thank you for your help on
    this! --
    1. Yes. I can see the XML code just fine.
    2. No. I get unknown host, connection failure, status not
    available.
    3. Doesn't work with IP, but that was expected as there are
    many domains on this server, not just this one.
    So, to continue, I thought I'd back up and try it on my CF7
    server. The program runs from here [
    http://www.saphea.com/echotest.cfm
    against the WSDL/CFC file here [
    http://components.findaportal.com/wsdl/trollws.cfc?wsdl
    I can see the XML file just fine, but the echotest does not work
    (code attached).
    I created a mapping of "/wsdl" to
    "d:\clients\components\wsdl" in trying to emulate Approach #2, and
    created a web subdomain of
    http://components.findaportal.com
    to "d:\clients\components", but no dice. Approach #2 may have to be
    abandoned.
    Why would it work for you and not me? That's the weird part.
    RLS

  • Read XML from a hardware sensor file into ODI

    Read XML from a hardware sensor file into ODI
    Hi,
    I am trying to extract xml data from a flowmeter that generates XML data.
    The xml file is found in http://ip_address/history.xml
    I’ve defined my Topology as such
    JDBC Driver: com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
    JDBC URL: jdbc:snps:xml?f=http://192.168.0.202/history.xml&ro=true
    Please note to access the file I have to supply a username and password so I did in the definition But when testing my setup I get an error:
    ava.sql.SQLException: The DTD file "http://192.168.0.202/history.dtd" doesn't exist: Server redirected too many times (20)
    Please note I cannot write dtd to the device as it is a read only device.
    Has anyone came across such an issue, how can I achieve this.
    Thanks
    Hicham

    Hi David,
    Thanks for your reply.
    I've tried this jdbc url
    jdbc:snps:xml?f=http://192.168.0.202/history.xml&d=c:\temp\history.dtd
    but when I test the connection i get the following error
    java.sql.SQLException: While generating the DTD from the XML file, a java.io.IOException exception occurred saying: Server returned HTTP response code: 401 for URL: http://192.168.0.202/history.xml
    If I browse http://192.168.0.202/history.xml and i supply the username and password I get an xml page.
    I've supplied the username and password in the definition tab of the Data Server windows but still getting the above error.
    THanks
    Hicham

  • Best way to fill CLOB with external XML from URL

    There seem to be a number of great tools available for pl/sql developers in the 8i DB environment and I am tryng to get a handle on them. So far I have worked with XSQL servlet (not PL/SQL), XML Parser and XSU.
    The problem I have is to fill a clob from an external xml file via a url and then make that clob available for DBMS_XMLSave to insert into DB. What is the best way to do this? I am thinking maybe I have to use utl_http or utl_tcp to fill the CLOB since I can't seem to find a method in the pl/sql XDK?
    XSU - can easily generate CLOB from a query but in this case it is not a query, it is XML from url
    XMlparser - can read in from a url using parse() but the document returned is a DOMDocument rather than CLOB.
    -quinn

    There seem to be a number of great tools available for pl/sql developers in the 8i DB environment and I am tryng to get a handle on them. So far I have worked with XSQL servlet (not PL/SQL), XML Parser and XSU.
    The problem I have is to fill a clob from an external xml file via a url and then make that clob available for DBMS_XMLSave to insert into DB. What is the best way to do this? I am thinking maybe I have to use utl_http or utl_tcp to fill the CLOB since I can't seem to find a method in the pl/sql XDK?
    XSU - can easily generate CLOB from a query but in this case it is not a query, it is XML from url
    XMlparser - can read in from a url using parse() but the document returned is a DOMDocument rather than CLOB.
    -quinn

  • Can not read data from URL!

    Hello,
    I want to read data from URL (http://84.100.130.82:8000/;stream.nsv). But can not do it. Because when try to call function openDataInputStream() shows this error: java.io.IOException: response does not start with HTTP it starts with: ICY. How I can fix this bug?
    HttpConnection c = null;
    InputStream is = null;
    OutputStream os = null;
    StringBuffer b = new StringBuffer();
    String           response,
    responseLitle;
    c = (HttpConnection)Connector.open(“http://84.100.130.82:8000/;stream.nsv”);
    os = c.openOutputStream();
    os.flush();
    is = c.openDataInputStream();     // ERROR CODE HERE
    int ch;
    // receive output
    while ((ch = is.read()) != -1)
    b.append((char) ch);
    response = b.toString();Regards, Ramunas

    Hi, I�m trying to do the same as above, get MP3 from a Shoutcast server.
    I got the same fault ("response does not start with HTTP it starts with: ICY") when I tried to open an HttpConnection as bellow:
    ============================================
    HttpConnection conn = (HttpConnection) Connector.open("http://64.236.34.196/stream/1074");
    Then I tried to open a socket connection as bellow:
    ======================================
    SocketConnection conn = (SocketConnection) Connector.open("socket://64.236.34.196:80");
    String get = "GET /stream/1074 HTTP/1.1";
    DataOutputStream os = conn.openDataOutputStream();
    os.writeUTF(get);
    InputStream is = conn.openInputStream();
    But then I got the following error:
    =========================
    java.lang.SecurityException: Target port denied to untrusted applications
    Could someone help me to find out what is going on?
    Thanks a lot!

  • How to read XML from web page inside servlet/jsp ?

    i have a url, which on sending request, shows XML in browser.
    Now i need to read this XML in browser and then manipulate it according to my need and display it on another page.
    actually the process is. :
    1) i have to first retrieve an xml from other site. (XML will only be shown in browser)
    2.)then i have to read the Xml and show it in according to my requirements.
    Is there any way to read XML directly from a Web Page ??
    is their logic to accomplish this.
    e.g in Servlet i can do somewhat like this :
    String wholeXml=Somemethod(url);
    Please Advice

    Hi,
    if u wanna extract data from XML. you can use Digester(Apache-jakarta) parser. All u need to create the beans(as per the data in xml), that will be populated by Digester.
    Digester takes xml(string) as parameter and populates the bean specified.
    U can use this bean in ur JSP.
    :::Note:::; use Digester in ur servlet.
    for more read:::
    http://www.onjava.com/pub/a/onjava/2002/10/23/digester.html
    I hope it shall work..
    @mit

  • Can not read file from URL

    I have this code for loadbitmap() function:
    String s = getCodeBase()+sdir+sfile;
    System.out.println("codeBase is=" + s);
    URL url = new URL(s);
    InputStream fs = url.openStream();
    BufferedInputStream bs = new BufferedInputStream(fs);
    And the file is a .bmp file, so I go on decoding this etc. It works fine within VisualCafe.
    When I created a virtual directory in IIS and run this applet from
    http://localhost/ImageApplet/ImageApplet.html address:
    I get in 1.3.1 Plug-in this error:
    codeBase is=http://localhost/ImageApplet/duke/some1.BMP
    Caught exception in loadbitmap!java.io.FileNotFoundException: http://localhost/ImageApplet/duke/some1.BMP
    If a type this as address in browser, it shows the image.
    Could any one tell me what I am doing wrong here?

    You can try this, even though it is not supposed to be different from your original code:
    URL url = new URL(getCodeBase(), sdir+sfile);
    System.out.println("getting image from " + url);
    InputStream fs = url.openStream();
    BufferedInputStream bs = new BufferedInputStream(fs);
    I could understand a SecurityException but a FileNotFoundException... A FileNotFoundException... You are reading from a stream originating from a URL, not a file!!!
    Which line causes the exception?

  • Reading XML from Oracle directory to generate charts

    Hi,
    I have a requirement create graphs, charts and maps based on data from a data warehouse (dw).  As I see things, there are two possibilities:
    Graphs, charts and maps based on an XML file
    Graphs, charts and maps based on Oracle tables
    Both would contain small data sets that will allow for quick response.  The intent of these graphs, charts and maps is to generate a dashboard that would allow the user to quickly drill down to the desired warehouse data.
    The proof of concept has already been validated using the Oracle table scenario.  My question is whether or not this could be accomplished reading xml files for generating the same set of dashboard items?
    My Oracle database and APEX environments configuration are as follows:
    NLSRTL                 11.2.0.1.0                                                           Production
    Oracle Database 11g Enterprise Edition 11.2.0.1.0                         64bit Production
    PL/SQL 11.2.0.1.0                                                                            Production
    TNS for Solaris: 11.2.0.1.0                                                               Production
    Application Express 4.2.2.00.11
    APEX Listener Release 2.0.2.  / Tomcat
    An Oracle database directory has been setup and is accessible to our APEX application.
    Any suggestions/help is appreciated.
    Thanks,
    Charles

    An Oracle Directory has an underlying OS directory associated with it, Oracle just overlays it's control structure onto an existing folder in the OS. You can manipulate the files with stored procedures in Oracle or at the OS level from outside of Oracle.
    If you manipulate the files from the OS level, outside of Oracle, you may need a refresh of the Oracle Directory structure.

  • Write n then read xml from database to create graph in an applet

    Hi mates
    I have one problem I want show a trend(graph) from sql database which is having the records of about 8600 in a day. And i want to show a graph for a day
    but sometimes it gives a problem like out-of-memory, so can anyone tell me how i can get read of it.
    and other this can i use xml for this means first write a data in xml format from database then read it at sametime and show graph in applet
    can anytell me how to do it
    any suggesion is appreciable
    thanx

    Here's are two example for what you are looking for
    Re: Load xml data in Oracle table
    Re: insert .xml file into xmltype table?
    First you need to create a DIRECTORY object.  That is how Oracle works and it expects a DIRECTORY object instead of a physical path when performing operations that read/write from disk.  The directory path provided to the CREATE DIRECTORY command must be a directory that the machine Oracle DB resides on can see.
    Then you can go either of two routes.  You can INSERT that XML directly into a table, as shown in the second link I provided or you can read it into PL/SQL as the first link shows.  Then in either case, you can use SQL to parse the XML for you.
    Depending upon your needs, you may get better performance if you insert the XML into a table as the second link shows, assuming the XMLType column is stored as SECUREFILE BINARY XML.

  • Read XML from remote server

    Not sure if this is even possible.
    I am using APEX on a INTERNAL server, on the same network is another server hosting files.
    Using PL/SQL code, I need to read the XML file.
    So APEX/ORACLE is at http:\\server1\apex\f?p........
    And the files are at \\server2\xml\file.xml
    Can I load the xml from server2 using pl/sql in server1?
    The XML is generated automatically from another system and can not be stored on the APEX server. It does not need to go into the database, just read, parced, and displayed.

    Hi,
    Using PL/SQL code, I need to read the XML file. You can create a directory object pointing to the location on server2 :
    CREATE DIRECTORY xml_dir AS '\\server2\xml';then you can access the XML content like this :
    DECLARE
    v_xml_doc xmltype;
    BEGIN
    v_xml_doc := xmltype(bfilename('XML_DIR', 'file.xml'), nls_charset_id('CHAR_CS'));
    -- XML processing here...
    END;
    /

  • Read xml from https

    Hi experts,
    I need to read a XML from https address,i have no idea to make it possible, any idea?
    points for all
    thanks all.

    Hi,
    It is secure link at XI end need to configure SSL else it is not possible.  We can read data through HTTP & SOAP adapter.
    Find below links for more help.
    http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/964f67ec-0701-0010-bd88-f995abf4e1fc
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/23894238-0701-0010-40b0-a0a6d5c4ad9f?prtmode=navigate

  • Read xml from application server

    Hello guys,
    I have craeted program read xml file from presentation server. its working fine...
    below is program
    now i want to program read xml file from Application server.
    so please give me some idea for that.........
    <MODIFIED BY MODERATOR - RESPECT THE 2,500 CHARS LIMIT>
    thanks
    jigar
    Edited by: Alvaro Tejada Galindo on Jan 12, 2010 11:50 AM

    Hi
    U need to just replace the fm to upload the file with command OPEN DATASET / READ DATASET / CLOSE DATASET: if you upload the data from application server in the same internal table loaded by fm for presentation your report should be the same
    Max

  • Read XML from applet

    Hi there,
    I would like to read XML data from Applet,
    first of all is it possible?
    If yes then how and will I require any extra pugin other than Java Plug-in?
    Thanks

    Sure you can, as long as the applet has permissions to read the xml file. If it is in the same directory as the applet it should be ok.
    There is no need for an extra plugin. Here's a starting point:
    import javax.xml.parsers.DocumentBuilderFactory;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    import org.w3c.dom.NodeList;
    Document doc = DocumentBuilderFactory.newInstance().newDocumentBuilder().parse(<some stream>);
    Element data = doc.getDocumentElement();
    NodeList dbChildren = db.getChildNodes();

  • Read xml from SQL Server

    Hello
    I need to read a xml from a sql server 2000 database. The field in the database is declare as text.
    When a try to read <a>3</a> the database adapter returns something like this.
    /a/3//a/.
    How do I solve the problem?
    Thanks
    Gonçalo Ribeiro

    Hello again.
    I'm using ora:parseEscapedXML to convert the string that contains XML into XML.
    I'm doing it in an assign. My doubt is what kind of variable should received the information?
    Thanks
    Gonçalo Ribeiro

  • READING XML FROM JAVA

    I am developing web services based GIS, I have XML file which was generated from Geoserver. I dont know how to link Java with XML and query XML from Java. I need help pls.
    PAI

    there are apis to parse xml using java,
    http://www.cafeconleche.org/books/xmljava/chapters/ch09s06.html
    try this link..
    regards
    Shanu

Maybe you are looking for