Readability add-on buttons are not possible to hide from toolbar.

I have installed Readability add-on from the official website - https://www.readability.com/addons
This adds three buttons left off my navigation bar, as depicted here - https://i.imgur.com/SgYjJnp.png
Ideally, I would like to move "Read" button moved to Australis menu and other two buttons hidden entirely, however, whenever I restart the browser, the buttons are kept in their initial position.
This was not the cause with any other add-ons I have installed.
There is no difference between right clicking those buttons and pressing "Move to Menu"/"Remove from Toolbar" or dragging them to desired locations via "Customize" button in Australis menu, the outcome is the same.
Please help.

Some extensions do reposition their buttons at startup but I haven't heard about this one before. Does Firefox have trouble remembering any other changed icons positions on the toolbar or between the toolbar and menu? If so, then it could be one of the issues in this article: [[How to fix preferences that won't save]].

Similar Messages

Once I add my .swf to Dreamweaver, the buttons are not clickable, how can I fix this?

Hello there,
I'd just like to start out by saying that this is the first time I have posted on these forums, so if I have done anything wrong, I apologize!
Anyway, about my question, just like the title says, once I import the .swf into Dreamweaver the buttons are not clickable, however when tested outside of Dreamweaver, they work correctly.
Basically I have an animated banner with some audio and two buttons, the buttons mute and unmute the music.
The file consists of two layers, one of which has 2 keyframes, the first keyframe has the Audio with the settings; "Effect: None. Sync: Start, Loop" and a button leading to the next frame.
The next keyframe (still on layer one) has much of the same but the Audio settings are different; "Effect: None. Sync: Stop, repeat x 1" and this will stop the music.
Now on the other layer (Rocket) I have a movie clip of a space-themed background and a rocket flying across it, the movie clip is made up of a motion tween and another movie clip which is the rocket.
I am using Flash CS6 and Dreamweaver CS6 on a Windows 7 computer. I am also using Actionscript 2.0
I apologize for the amount of information and I'm not very briliant at explaining things, so here are some images of the flash file, hopefully they'll help;
Layer setup - http://i.imgur.com/iZHwfAw.jpg
The movie clip - http://i.imgur.com/ayvPJUZ.jpg
Keyframe one sound settings - http://i.imgur.com/LWbnQhO.jpg
Keyframe two sound settings - http://i.imgur.com/7kS9dO2.jpg
Actionscript for the first button/first keyframe - http://i.imgur.com/x6ROqPv.jpg - (The second button/keyframe has the same code, but obviously the instance name and frame number has been changed)
Again, I apologise if this all seems confusing!
Thanks in advance for any answers to this question
Adam.

If you did not create this swf yourself then you won't be able to do what I am suggesting. If you did, then open the fla in Flash and go into the Publish Settings and select the option to publish an html file as an output. That will create an html page that embeds the Flash file. Test that file in your browser and see if it plays properly. IF so, then copy that code in place of whatever Dreamweaver did to embed the Flash.
Dreamweaver is not a reliable tool for embedding Flash content... why it does not do it the same way Flash does it is anyone's guess.

HT3149 iPhoto 09 When I click on the preview pane to move a photo into edit, it shows up black and the edit buttons are not active. How do I fix that?

When I click on the preview pane to move a photo into the edit pane, there is no image just a black square and the edit buttons are not active. A few images in an event will move to the edit pane but most will not. I cannot work with those images that do not enter the edit pane..no attaching to email, make a card, slideshow, etc.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Buttons are not displayed for the first time when drawImage method is used

Hi
In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
Please help me!
Thank You

Hi
This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
import java.awt.*;
import javax.swing.*;
/*<applet code = MyClass width = 500 height = 500>
</applet>
public class MyClass extends JApplet
Image img;
JButton b1,b2;
Container cp;
Canvas1 cv;
class Canvas1 extends JPanel
public void paint(Graphics g)
super.paint(g);
g.setColor(Color.black);
g.fillRect(0,0,500,500);
img = getImage(getCodeBase(),"image1.jpeg");
g.drawImage(img,20,20,this);
public void start()
cv = new Canvas1();
cv.setBounds(0,0,500,500);
cp.add(cv);
public void init()
setLayout(null);
cp = getContentPane();
b1 = new JButton("Button1");
b1.setBounds(1,1,100,30);
cp.add(b1);
b2 = new JButton("Button2");
b2.setBounds(200,1,100,30);
cp.add(b2);
It would be very helpful to me if you could fix the problem.
Thank You.

Document is being distributed - changes are not possible

Dear Guru's
I have an issue when making a quotation transaction. After i saved the quotation transaction, i would like to change the window into edit mode.
So i have to click the display or change button and then after i click that button, there is an message text "Document is being distributed - changes are not possible" but after i wait for some minute, system still can not be change. and still appearing a message text "Document is being distributed - changes are not possible"
Please could u give some information about this issue?

The order in the CRM system remains in status 'to be distributed'
because it waits for an answer of the OLTP system that the order has
been successfully saved.
The reason could be due to the following:
1. Check in your system the delta download is active ? Did you perform
 an initial download of SALESDOCUMENTS ?
 If you check in transaction R3AC4 there must be an entry for
 SALESDOCUMENT to enable a successfull delta download.
 Without a successful initial download of this object, no delta
 download will be performed. Please refer to the SETUP AND
 DOWNLOAD guide you will find in the service market place
 http://service.sap.com
2. Check if there are any ABAP Dumps related in OLTP ? If yes, status
 will always be in distributed as CRM is still waiting for a reply
 from OLTP.
3. Check your inbound/outbound queues are working.
The note 490932 will help you to check your dataexchange
customizing.
Please, reward points if it helps you.
Regards, José Ignacio

Popup saying RTC functions are not possible

Hi,
i have portal ep6 sp10. After my server restart, i log on with an user id, and logoff. and When i login agian..the popup comes up and says that the user is logged on some where else, thus the Real time collaboraion functions are not possible. But i have successfully logged off previously.
Any one ran into this kind of scenario. Can you point me in right direction..I was guessing that previous logoff didn't kill the session. Where can i track the session of an user. Any suggestions are appreciated..
thanks
Chiru.

Chiru -
You can check whether your user has a session open in the Visual Admin console. Navigate to Server -> Services -> Security Provider -> Login Sessions.
If needed, you can terminate sessions by clicking on the pencil to change to write mode and them selecting the session and clicking on the Terminate Session button.
Enjoy!
Kyle

New tab and close tab buttons are not enabled

On firefox page, new tab and close tab buttons are not neabled and right click shows the same functions as not available.

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Help Please - Buttons are not displayed in some platforms/browsers

I've designed my website using flash 8 and I've just noticed
that the buttons aren't being displayed on all browser/platforms.
It works fine on the majority of them but I just went to a couple
of places and accessed my page and the buttons are not shown at
all. Anyone knows why it works in some platforms and not in others?
What can I do to fix this problem?
my website is:
http://www.threecellos.co.uk
Marcello

Hi
This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
import java.awt.*;
import javax.swing.*;
/*<applet code = MyClass width = 500 height = 500>
</applet>
public class MyClass extends JApplet
Image img;
JButton b1,b2;
Container cp;
Canvas1 cv;
class Canvas1 extends JPanel
public void paint(Graphics g)
super.paint(g);
g.setColor(Color.black);
g.fillRect(0,0,500,500);
img = getImage(getCodeBase(),"image1.jpeg");
g.drawImage(img,20,20,this);
public void start()
cv = new Canvas1();
cv.setBounds(0,0,500,500);
cp.add(cv);
public void init()
setLayout(null);
cp = getContentPane();
b1 = new JButton("Button1");
b1.setBounds(1,1,100,30);
cp.add(b1);
b2 = new JButton("Button2");
b2.setBounds(200,1,100,30);
cp.add(b2);
It would be very helpful to me if you could fix the problem.
Thank You.

Some futures in bpel which are not possible with ESB and vice versa

Can anyone please tell me some futures in bpel which are not possible with ESB and For some features available in ESB that are absence in BPEL?

I think you've mistaken the meaning of both technologies. ESB actually works as a part of BPEL, for instance you can create partner link from any esb service.
ESB service can only expose data or retrieve and process (transform) them from another service. BPEL is using services like ESB as a source and adds decision making functionality which is not present in ESB.

I cannot add an event on my iPhone or iPad calendars. The "plus" button, or add event button does not even appear when I open the app.

I cannot add an event on my iPhone or iPad calendars. The "plus" button, or add event button does not even appear when I open the app.

Thanks for the suggestion. Sadly, that did not fix it. I changed the sync setting as you described, but I still don't get my older events. I have turned my IOS devices off and on again too. One more piece of information, the only events I see for October are recurring events. Either one day events like birthdays set to repeat every year, or events within the month that spanned more than one day. No one time events or appointments are showing.

Calendar invites are not possible

I am frustrated. Working with 10.8.5.Invites via ical are not possible. Is there anywhere a good and helpful manual which shows the different steps.
Once I enter the first letters of an mail address, than choosing the one from the pull down list it is always marked with a "?" question mark. Then I push the button "sent" or "refreh" button, but the person which should receive the invitation does not receives it, nor can I check whether the mail actually was sent.
Would be really interested in how to solve this problem
Kind regards
Gerhard

Sorry for the late reply, it is still an irritating issue. Apple says it's Google's poblem. Google thinks it's Apple's issue. Extremly irritating.
I tried setting up the Calendar using the Exchange presets but that did not solve the invitation problem.

Action Buttons are not getting displayed in UWL

Hi Experts,
I am facing some issues in UWL action buttons and I need your help in resolving this.
When a request is generated in ECC systems, a notification is generated in ECC as well as portal.
In ECC, we can see two buttons in the notification, "Complete" and "Cancel work item in Inbox".
But in portal, these two buttons are not visible in the notifications.
Please let me know how to bring these action buttons in UWL portal.
Thanks a lot,

First of all, please see SAP Note 1133821 - UWL Destination Service Configuration and create the RFC destination as explained in the note.
The procedure is also explained in the wiki:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=102793389
Thanks,
Shanti

PPT action buttons are not present in pdf file upon conversion

Hi
Am using Office 2003 (SP3) and Acrobat 8 (version 8.1.6).
Have been using action buttons in the presentations for several years, works fine.
When converting existing files, action buttons in both PPT show and pdf file just works, no problems.
Newly generated presentations work fine as PPT show. But when converted to pdf file, the action buttons are simply missing.
Have verified that all action buttons are "at front", same result.
Have tried to avoid corporate templates by creating a blank presentation and building a small and simple navigating presentation. Again, works fine as PPT show. And again, upon conversion there are no action buttons present in the pdf file.Corporate changes thereby should be ruled out.
Have checked all settings (including "Adobe PDF, Change Conversion Settings") between a working and a non-working PPT file, can't identify any differences.
A colleague helped out (using Acrobat 6), same result. But upon activation of "Adobe PDF, Change Conversion Settings, Restore Defaults", the action buttons worked for him. Tried it with Adobe 8, no such luck.
Have trialed the "Prep 4 PDF" tool, then the PDF file is complete and the "go to slide" keys appear and work again.
All new updates available are installed, anyone experienced the same and found a fix for this trouble?

Have tried both ways, same result.
When working with new presentations, the pdf file is viewable, but the action buttons are not present.
When working with past presentations, the action buttons are present and do work as expected.

Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?

Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

File Upload Action Button are not working

Hi ,
In the File Upload Process when the processor are open change request there are Action Buttons Approve/Reject ,
When the CR Processor are Click on either Approve or Reject these two Action Button are not working (means its not show any activity) , while rest of all action button like save,close check , Run validation are working ...
While Processor has authorization to Approve/Reject that CR ...

Hello Nikhilesh
These buttons are dependent upon the workflow steps. Check that. Check the linkage for workflow. Check SWI6 - CR number and the step. Based on the step you can identify whether the proper step is assigned or not.
Thanks
Kiran

Readability add-on buttons are not possible to hide from toolbar.

Similar Messages

Maybe you are looking for