Reader 10.1 update English MSP

Hi
Can anyone confirm if Adobe are going to release an 10.1 MSP for English only. I know they have a Multiple Language MSP for download but not the English only version.
As we can see from other forums the ML Update doesn’t work unless you have the ML Reader installed.
Can we conclude that the 10.1 update is only required for Multiple Language Reader????
Anyone at Adobe that can answer this please???
Thanks Jo

Hi all,
I am struggling to use the 10.1 patch to upgrade our existing installations [10.0.1].
Reader 10.0.1 was deployed via SCCM - it was done in two steps.
1) Reader 10.0.0 Non MUI was deployed first using a transform file [msiexec /i acroread.msi allusers=true transforms=acroread.mst /quiet]
2) 10.0.1 update patch was then applied [msiexec /p AdbeRdrUpd1001_Tier1.msp /qn]
I would have liked to just use the 10.1 patch to upgrade our existing installs as mentioned.
However, when trying to update using the 10.1 patch on existing installs, I get the following error message:
To summarize, I have deployed a non MUI base version of Reader and when trying to update using a MUI update patch, the error message above appears.
As Ankit_Jain states, The 10.1.0 update is intended as an update for all prior installations of Reader (MUI or otherwise).
Am I missing something?
How can I overcome this issue?
Many thanks,
Jay.

Similar Messages

Adobe Reader 9.1 Update "MSP"

Hello everyone,
I have Adobe Reader 9.1 deployed to 550 PC via SMS and now I need to apply the patch AdbeRdrUpd911_all_incr.msp. How is the way to apply the MSP patch without unintalling 9.1.
This what I did with the MSP patch, I've injected the patch throught the MSI of 9.1 and I have custom MST. When you install Adobe 9.1 with the injected Patch on fresh machine that doesn't have Adobe Reader 9.1, it will install fine and will show in the Add Remove Program " Adobe Reader 9.1.1. If you have Adobe Reader 9.1 installed on the machine and push the Adobe Reader 9.1 with the injected patch "MSP" it will fail.
I can remove Adobe Reader 9.1 and then install Adobe Reader 9.1 with the MSP "Adobe Reader 9.1.1" which I'm not planning on doing this.
I just need a way to apply the MSP patch on the top of the existing Adober Reader 9.1 on the PCs.
Any idea.
THanks

You can silently push the patch file using the following command line.
msiexec /update AdbeRdrUpd911_all_incr.msp /qn

Reader 10.1 update deployment through SCUP losing customizations.

Hi All,
I am currently in the process of testing the deployment of Adobe reader updates through the published SCUP catalogs and SCCM in a very large enterprise environment. I have run into an issue whereby %95 of workstations appear to be falling in scope for the base 10.1 update package and not just the msp patch. When testing this 'Adobe Reader 10.1 English' update the result is all corporate customizations that were built into the original 10.0.1 package are removed and the application returned to default settings.
Is anyone able to provide any guidance on the deployment of Reader X updates through SCUP in such a way the corporate settings are not lost?
Regards,
Ben

Hi Akshat,
Unfortunately we have a third party company repackage applications for internal use so to obtain a full list of customizations will take a little time however I am confirming this behaviour through previously hidden categories within the application preferences reappearing such as the 'Updater' entry. I believe our custom corporate settings were added through the customization tools provided by Adobe resulting in an MST which is installed with the base Reader 10.0.1 package.
I have also attempted to manually install the 10.1 msp update over our repackages Adobe Reader 10.0.1 install (AdbeRdrUpd1010_MUI.msp) and receive the following error.
'The upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program...'
Is there a reason why the 'APSB11-16 Reader Multi Lingual User Interface 10.1.0 Update \ AdbeRdrUpd1010_MUI.msp' would not a) scan for applicability when Reader 10.0.1 is installed and b) cannot be manually installed over an existing Reader 10.0.1 install.
At this time we cannot begin approving the 'APSB11-16 Reader English 10.1.0 Update \ AdbeRdr1010_en_US.msi' imported through the published Adobe catalog for deployment as it appears machines would revert to default settings such as having auto update re-enabled as an example.
Can anyone else confirm this behaviour whereby deploying 'APSB11-16 Reader English 10.1.0 Update' through SCCM\SCUP appears to perform a full reinstall of the application resulting in the loss of originally packaged settings?
Ben
Message was edited by: Ben2011
In reading the linked post below, am I to assume that the correct method to manage Adobe Reader 10.x in the enterprise with SCCM\SCUP is to redeploy the new quarterly updated base MSI's with MST's containing corporate settings and then only use SCUP to deploy interum quarterly patches? I was expecting that we can continue to use our packaged 10.0.1 base package and then deploy patches as released without having to redeploy the entire application each quarter.
http://forums.adobe.com/thread/865822?tstart=0

Help with opening Adobe Reader and downloading updates

I can not open Adobe .pdf files any longer (this started yesterday, prior to that I could open adobe files).
When I double click a .pdf file I get this notice on my screen: Windows cannot access the specified device path or file. You may not have the appropriate permission to access file.
So I went to the Adobe download site to download a new copy of Adobe. When I start the download I get this on the screen: The instruction at "0x0e3a0068" referenced memory at "0x0e3a0068." The memory could not be written. Then two options are listed: click OK to terminate or cancel to debug. So I click on cancel and I get this on my screen: Internet Explorer has closed this webpage to help protect your computer. A malfunctioning or malicious addon has caused I.E. to close this webpage.
I don't have AVG running, I do have avast but I've disabled it. I ran Registry Mechanic and an I.E. erasure program but nothing helps.
I have gone into I.E. and reduced the security level to its lowest state but no joy.
So, any ideas or suggestions on what's the problem and how to overcome it would be appreciated. Thanks, in advance, for your reply. Jim R.

Hi Mike..tried that as well but no joy. A friend of mine was looking at it all and noticed that it was an I.E. thing as far as not letting me redownload the reader so I went to Mozilla Firefox and I could download a new version but....whenever I attempt to open a .pdf file I get that message, "Windows can not open the specified device, path or file. You man not have the appropriate permissions to access the item."
Damn...this is irritating as I need to get to some of thos files as I need them for a Journal I'm working on as editor-in-chief.
It all worked just fine last Saturday but starting Monday when I was on my flight out to D.C. no joy.
Sigh...Jim R.
Jim R.
Date: Tue, 1 Dec 2009 14:50:27 -0700
From: [email protected]
To: [email protected]
Subject: Help with opening Adobe Reader and downloading updates
Under the help menu, there is an option to repair the installation of reader. Did you try that?
>

Process Chain : Read PSA and Update Data Target in BI 7.0

Hello Experts,
In my Process Chain I have a variant Execute Infopackage to load the data only into PSA. then I have next variant as *Read PSA and Update Data Target*. my data target was a Master Data table Hierarchy
In the variant " Read PSA and Update Data Target". the selection Parameters were
PSA.Table : 0GLACCEXT_T011_HIER_BA1
Selection Object Type : same Infopackage in Varaint Execute Infopackage
the Error message was Variant doesnot contain a valid combination request/data target
I checked the PSA-Table using RSA1OLD Transaction then I find four PSA Tables:
0GLACCEXT_T011_HIER_BA1
0GLACCEXT_T011_HIER_BA2
0GLACCEXT_T011_HIER_BA3
0GLACCEXT_T011_HIER_BA4
All the requests are linked to PSA Table *0GLACCEXT_T011_HIER_BA4*.
I can't understand why there exists four PSA Tables?
I try to link the PSA-table 0GLACCEXT_T011_HIER_BA4 in the variant *Read PSA and Update Data Target and try to save it it raises short dump.
If I select 0GLACCEXT_T011_HIER_BA1 in the varaint I shouldn't face any problems.?
but the process chain raises an Error message Variant doesnot contain a valid combination request/data target with this variant.
How shall I handle this issue?
Please carify me the issues as soon as possible.
thanks in advance
Regards
sailekha

Hello,
In the Variant Read PSA and Update Data Target I have to select the PSA Tabelle Name from the preselection list in the System it shows me all the four PSA Tables that I mentioned.
I can select any one of them. So I trieed with all the four PSA Tables in the list but I can selct only the XXXX......BA1 table then only I can save and include it in the PC. If I select the remaining tables BA2, BA3, BA4.........while I try to save the Variant it raises short dump.
I checked the PSA using the Transaction RSA1OLD under PSA...... I find 4 PSA Tables( I don't know whether they are PSA Tables or not but in the Variant it states that they are PSA Tables) in which all the requests are attached to BA4. only.
I observed that ony for Hierarchies I find four PSA tables for remaining one only one PSA table was available.
I totally confused how to handle this situation. any suggestions......... please help me to resolve this problem.
Thanks & Regards

Reader 10.1 update fails, creates huge log files

Last night I saw the little icon in the system tray saying an update to Adobe Reader was ready to be installed.
I clicked it to allow the install.
Things seemed to go OK (on my Windows XP Pro system), although very slowly, and it finally got to copying files.
It seemed to still be doing something and was showing that it was copying file icudt40.dll. It still displayed the same thing ten minutes later.
I went to bed, and this morning it still showed that it was copying icutdt40.dll.
There is no "Cancel" button, so this morning I had to stop the install through Task Manager.
Now, in my "Local Settings\TEMP" directory, I have a file called AdobeARM.log that is 2,350,686 KB in size and a file MSI38934.LOG that is 4,194,304 KB in size.
They are so big I can't even look at them to see what's in them. (Too big for Notepad. When I tried to open the smaller log file, AdobeARM.log, with Wordpad it was taking forever and showing only 1% loaded, so after five minutes, I terminated the Wordpad process so I could actually do something useful with my computer.)
You would think the installer would be smart enough to stop at some point when the log files begin to get enormous.
There doesn't seem to be much point to creating log files that are too big to be read.
The update did manage to remove the Adobe Reader X that was working on my machine, so now I can no longer read PDF files.
Maybe I should go back Adobe Reader 9.
Reader X never worked very well.
Sometimes the menu bar showed up, sometimes it didn't.
PDF files at the physics e-print archive always loaded with page 2 displayed first. And if you forgot to disable the look-ahead capability, you could get banned from the e-print archive site altogether.
And I liked the user interface for the search function a lot better in version 9 anyway. Who wants to have to pop up a little box for your search phrase when you want to search? Searching is about the most important and routine activity one does, other than going from page to page and setting the zoom.

Hi Ankit,
Thank you for your e-mail.
Yesterday afternoon I deleted the > 2 GB AdobeARM.log file and the > 4.194 GB
MSI38934.LOG file.
So I can't upload them. I expect I would have had a hard time doing so
anyway.
It would be nice if the install program checked the size of the log files
before writing to them and gave up if the size was, say, three times larger
than some maximum expected size.
The install program must have some section that permits infinite retries or
some other way of getting into an endless loop. So another solution would be
to count the number of retries and terminate after some reasonable number of
attempts.
Something had clearly gone wrong and there was no way to stop it, except by
going into the Task Manager and terminating the process.
If the install program can't terminate when the log files get too big, or if
it can't get out of a loop some other way, there might at least be a "Cancel"
button so the poor user has an obvious way of stopping the process.
As it was, the install program kept on writing to the log files all night
long.
Immediately after deleting the two huge log files, I downloaded and installed
Adobe Reader 10.1 manually.
I was going to turn off Norton 360 during the install and expected there
would be some user input requested between the download and the install, but
there wasn't.
The window showed that the process was going automatically from download to
install.
When I noticed that it was installing, I did temporarily disable Norton 360
while the install continued.
The manual install went OK.
I don't know if temporarily disabling Norton 360 was what made the difference
or not.
I was happy to see that Reader 10.1 had kept my previous preference settings.
By the way, one of the default settings in "Web Browser Options" can be a
problem.
I think it is the "Allow speculative downloading in the background" setting.
When I upgraded from Reader 9 to Reader 10.0.x in April, I ran into a
problem.
I routinely read the physics e-prints at arXiv.org (maintained by the Cornell
University Library) and I got banned from the site because "speculative
downloading in the background" was on.
[One gets an "Access denied" HTTP response after being banned.]
I think the default value for "speculative downloading" should be unchecked
and users should be warned that one can lose the ability to access some sites
by turning it on.
I had to figure out why I was automatically banned from arXiv.org, change my
preference setting in Adobe Reader X, go to another machine and find out who
to contact at arXiv.org [I couldn't find out from my machine, since I was
banned], and then exchange e-mails with the site administrator to regain
access to the physics e-print archive.
The arXiv.org site has followed the standard for robot exclusion since 1994
(http://arxiv.org/help/robots), and I certainly didn't intend to violate the
rule against "rapid-fire requests," so it would be nice if the default
settings for Adobe Reader didn't result in an unintentional violation.
Richard Thomas

How to load file thru reader which contains non-english char in file name

Hi ,
I want to know how to load file in english machine thru reader which contains non-english chars in file names (eg. 置顶.pdf)
as LoadFile gives error while passing unicode converted file name.
Regards,
Arvind

You don't mention what version of Reader? And you are using the AcroPDF.dll, yes?
Sent from my iPad

Adobe Reader 9.3 Update, DELL Monitor Issue, Comes up as Mobile PC

Hi Folks,
I have currently discovered a bug in the Adobe Reader 9.3 Update released on 1/12/2010 where in a multi-monitor environment one of the monitors or sometimes multiple monitors come up as a Moblie Display.
I have seen this happen when the update is applied on a Windows 7 64bit box with Quad or Dual Monitor set-up. Using Dell p2210t Monitors and Nvidia Quado NVS Cards (all models) not sure if this is only happening on other OS's with the same set-up but that's what we've seen. I have since stopped running the upgrade or roll it back on affected machines.
I wonder if ADOBE knows of the issue and has an update for it.

Use the forum for Adobe Reader.

Reading and writing non-English files

Hi there..
I wonder if anyone can tell me how to read and write non-English language files like French or Arabic files...
Im also interested in knowing how can i convert from Unicode to ASCII and vice versa..
thanx.. Mourad

hi there ..
thanx for ur cooperation .. but actually i have tried the following code and it didnt work; so, im looking for more help :)
esp. if there are any notes about the files themselves for example;
by the way i used Notepad files in unicode format..
my code is :
import java.io.*;
public class MainClass {
public static void main(String args[]){
String inputfile = "arabic.txt";
String outfile = "outfile.txt";
try{
RandomAccessFile raf = new RandomAccessFile(inputfile, "r");
InputStreamReader isr = new InputStreamReader(
new FileInputStream(inputfile), "Cp1256");
OutputStreamWriter osw = new OutputStreamWriter(
new FileOutputStream(outfile), "Cp1256");
for(int i=0; i<raf.length(); i++)
osw.write(isr.read());
osw.close();
}catch(UnsupportedEncodingException uee){
System.out.println("UEException: "+ uee.getMessage());
}catch(FileNotFoundException fnfe){
System.out.println("FNFException: "+ fnfe.getMessage());
}catch(IOException ioe){
System.out.println("IOException: "+ ioe.getMessage());
thanx again..Mourad

Adobe Reader 9.3 update beschädigt Windows Vista

Als Neuling gestatte ich mir erstmal die Verwunderung darüber, dass ich von einer deutschen hotline in ein deutsches Forum geschickt werde, in dem scheinbar ausschließlich englisch gesprochen wird?
Ich kämpfe seit Tagen gegen einen Kundenrechner, mit Vista home - aktuell, geschützt - der durch die Installation des Reader 9.3 updates unbrauchbar wird.
Alle Programme sind mit dem Reader verknüpft, NICHTS lässt sich starten, da IMMER der Reader 9.3 geöffnet wird, die eula.exe aufruft, die der Reader natürlich auch nicht öffnen kann.
Nach der Deinstallation des Readers verhält sich das System wieder völlig normal.
Foxit-Reader z.B. verursacht derlei Probleme nicht.
Ist das die einzige Möglichkeit, die man in so einem Fall hat?
Danke im Voraus!

You can find the german forum here:
http://forums.adobe.com/community/international_forums/deutsche

I need that Adobe reader don`t update automatically.

Good Afternoon
In My company actually have problems with the Adobe reader update, we had worked in various solutions for example , in the program option Edit/preferences option update and check in No download.... other was program files/common files/Adobe/ rename the folder update with other character or other name.
this solutions was not succesfull , I have the problem yet.
I need help with this situation because my data channel is not working correctly, my users have problems.
If somebody know about one solutions please help me!
I need that Adobe reader don`t update automatically.
Have good day!

If you have a Windows Domain environment in your company and domain controllers are Windows 2008/2008 R2, than you can use this Grou Policy Templates: https://sourceforge.net/projects/customadmx/
They are capable of switching auto updates off.

My Overdrive for my library books does not allow me to access the book that i am currently reading since IOS7 updated. also how do i now turn off the apps running in the background that are draining my battery?

my Overdrive for my library books does not allow me to access the book that i am currently reading since IOS7 updated. also how do i now turn off the apps running in the background that are draining my battery?

hey i m working on my illustrator and i m having many problems with my swatches
for example i use the green phosphorique i don't get this color i get another green
and many colors too it's like illustrator chooses for you the only green color
so please i kind of need help i can show you pictures of that i print screen viewed them.. so anybody who can help... pleaaaaaaaaaase contact me because i m having a project now..
my e mail is [email protected] i would be thankful
i even tried to download the illustrator on my friend's computer also i m having this problem ....

Adobe Reader XI - Deutsch - Update {AC76BA86-7AD7-0000-2550-7A8C40011004} could not be installed....

Hi, I want to install BlueStacks on my comuter. At the end of the installing process I get this message:
which means:
Adobe Reader XI - Deutsch - Update {AC76BA86-7AD7-0000-2550-7A8C40011004} could not be installed.... Errorcode 1625.
What to do now?

Hi, Pat, thanks for your reply. Actually I want to install BlueStacks, 'cause it enables me to use "What'sApp" on my PC.
Anyways, my current Reader version of Adobe Reader is 11.0.4, and I've tried several times to install BlueStacks.... no success!

Cannot re install adobe reader after Anna update !

Hi there, i know there has been some chat about losing Quick office and Adobe reader after Anna update on N8s on this site, I also lost office and Adobe after the update ! I needed to get office asap so i went to the quick office website and paid for it, that works fine but it seems adobe will not install even directly from quick office ! The support from QO has been great but i still cant re install adobe !! They have finally suggested that i re install Anna and than try again ! Does anyone have any other ideas !
Solved!
Go to Solution.

@beefy122
I have the same problem but I am not prepared to pay for Quick Office or pdf reader because the full versions came as standard with my N8.
It appears that the Anna upgrade comes in 3 parts:
The main Anna file, Additional file 1/2 and finally additional file 2/2.
I installed the Anna upgrade then 24 hours later I was offered (both via Ovi Suite on my PC) the 2/2 additional file.
However, Quick Office and pdf reader are apparently included in 1/2, which has not yet been offered to me, presumably because my phone has not recognised that it has not been installed.
I am on Orange Uk and I wonder if Orange have not yet fully tested the updates and therefore that is why the full suite is not available to me. I may be wrong of course.
At one point on one of the other threads, someone had posted a link to the updates required for both 1/2 and 2/2 but these links disappeared from the posting quite quickly.
Which updates have you loaded?
I have re-installed Anna 3 times and it has never offered me the 1/2 update that I require.
I would also appreciate other ideas but they have not been forthcoming yet despite many postings in quite a few threads (other than suggestions to reset the phone etc, that I am not prepared to do)
History: Always Nokia since 1994 including Nokia 2140, 7110e, 6150, 6210, 6310i, 6230i, N82
Current: Nokia N8 (Anna - I have no intention of going to Belle) - and delighted with it!

Adobe Reader won't update

Adobe Reader will not update on my Windows 7 OS. It says:
=========================================
Update failed
Updates have been disabled by your system policy.
Error: 1007
=========================================
What does this mean? How can I fix it so that it WILL update again on its own?

codyw1 wrote:
...does Adobe have some sort of removal tool like some vendors do or anything like that?
No, just uninstall from Control Panel | Add/Remove Programs.
As for the installer, you can download it directly from http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.4.0/en_US/AdbeRdr940_en_US.exe

Reader 10.1 update English MSP

Similar Messages

Maybe you are looking for