Reader 10 & Dragon

Reader 10 introduced a conflict with Dragon Naturally Speaking 10, 11 & probably earlier versions as well. pecifically, I believe the problem was something in Reader10's new security features. Initially I could not find out anything about it, it just looked like Adobe & Nuance were both waiting for the other to fix it.
Can anyone tell me if recent updates of Reader 10 have fixed this conflict? Or should I continue to use reader 9 or Foxit?
I run DNS 10.1 & reader 9 on a Dell Optiplex 755 (2.33 duo processor, 4 GB RAM 0n 32 bit Vista), & DNS 10.1 & Foxit on an IBM notebook R503 1.4 GB Celeron 1.25GB RAM XP.

Never heard of that Dragoon software, but she can try using this tool to remove all traces of previous versions of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, she can try downloading the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
and runnning it immediately after restarting her computer.

Similar Messages

HP DV9500 DVD drive not working

My dvd drive will not read certain disks. It has been like this for a few months now, but it normally reads retail discs (games and Operating systems). Now it wont read Dragon age. the disk is in good condition, but it only shows the empty icon for the dvd drive and when I try to open it, it only says there is no disk. Drivers say they do not need to be updated when prompted from device manager and there is no repair for it on the health center.

Finally i found this post and it worked.
RE: I know this is a really old post but I found a solution for my computer that I didn't find on the internet. My DVD drive wouldn't show up in the device manager either. I tried drivers, deleted the upper and lower registry files...changing dvd drives...I tried everything I could find on the internet to fix this problem..and nothing worked. Today I download MagicISO and MagicDisc to burn an .iso image...I guess the virtual drive installed a driver when I installed MagicDisc...my DVD burner is working now and showing up in the device manager as well as my virtual drive and I am running Windows 7 on a DV9000 HP pavillion notebook. I hope anyone else reading this with this problem is able to solve thier issue with this solution. I have been searching for months!!! GoodLuck!
http://download.cnet.com/MagicDisc/3000-7970_4-10383679.html

SimplePass not fully working with IE 11

HP DV7 6143cl Windows 7 Home Premium 64 bit recently updated IE from 9 to 11.
I bought the laptop mid 2011and did not get around to looking at the fingerprint reader until the end of that year. I used it briefly but with very few passwords I un-enrolled my fingerprints and let it sit idle.
Recently I decided to use it again but it was dead.
I installed the Validity Fingerprint Sensor driver sp55109.exe and HP SimplePass Identity Protection 2011 sp54680.exe. Upon restart it took me though the fingerprint enrolment process and started working.
The first driver is the actual sensor and the second is the management software, correct?
Very recently I updated Internet Explorer from 9 to 11 and the SimplePass stopped working again. So I repeated the above steps but only overwrote the existing drivers.
It started working again in that I can logon the laptop with a fingerprint and I can assign a website to an enrolled fingerprint to launch but it is no longer asking me if I want simple pass to save passwords.
Could this be related to IE 11?.
I read Dragon Fur's tutorial on SkyDrive: Simple Instructions to Upgrade HP.
Should I try again after I delete the existing fingerprint driver?
I the tutorial mentions an very new driver sp63224 HP SimplePass V6.0.100.276 Win7-8
Would this driver help or am I just overlooking something else as it partially functions?
This question was solved.
View Solution.

The newer SimplePass adds better compatibily with newer browsers.Will it solve all of your problems? Possibly, but either way it can't hurt.
There is also a newer Validity you might want to try.
Validity:
http://ftp.hp.com/pub/softpaq/sp56001-56500/sp56403.exe
SimplePass:
http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63224.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Adobe reader XI "Enable Protected Mode at startup" dragon naturally speaking

adobe reader XI "Enable Protected Mode at startup" doesn't work with dragon naturally speaking, how do I download the older version?

Just disable Protected Mode (Edit | Preferences | Security (Enhanced)).
If you do need a previous version: http://get.adobe.com/reader/enterprise/

My MacBook Pro has an aerphone jack but nothing for microphone. I am trying to use Dragon Dictate and a friend gave me a USB attachment to connect to the mic and headphone. It is in a transparent plastic case charcoal gray in color and says 3D sound on th

I have Dragon Dictate but did not notice until now that the earphone jack is only for listening so I cannot dictate using headphones and the mic on the computer is not good enough for that. A friend gave me a USB card that says 3D Sound on top; it is a plastic case, charcoal gray in color and side jacks to connect headphone and mic. Connected to computer but it does not do a thing. Any ideas on how to make it work?

You are not supposed to connect a pair of speakers(as in left and right in a stereo pair)to two separate out jacks on the sound card.the place on the card where headphones/speakers with the mini jack goes is the right place.

HT202159 I downloaded Dragon Express and now it won't open. It says it is INSTALLED but it won't open when clicked. Tried to trash it and start over but won't let me trash because it says it is open. But it isn't! Called mac help and they can't help e

I downloaded Dragon Express and think that it did not completely complete the download. However, it says that it has been installed and my account has been charged 50.00. However, when I click on the icon, it will not open. I have tried everything from restarting, trashing the app, but it continues to tell me that I cna't trash the app because it is open. I called apple support and they worked with me for about 30 minutes until they finally told me that the call had to end regardless of the fact that after all of their efforts, the problem was not resolved. He gave me a link to get a refund and said it was easy to navigate however, it led me nowhere. So now I am stuck with a worthless app, that does not work and a 50.00 bill to pay because I can't get support or link support to get a refund and even if I could get a refund I still have the Dragon express on my computer that does not work!!! HELP! I don't know how the app can be open when even support could not figure it out! When I restart, the finder window opens where it never did before.

Well first of all this is a public forum, so keep that in mind. The users here generally can not look up your case numbers.
If AppleCare didn't work out for you, I believe your next step is
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
Unfortunately, their case indexing is on a different database, and they will not be able to look up your case number either. However, their support is free, and despite it may take a few bounces of emails back and forth, there is a decent chance they may be able to get a solution.
Or... you can still try to shoot the **** with us here, which is Ok as well. But you'll have to keep in mind we can't look up your case numbers.
By the way, the link for a refund, I think is for the same link I just gave you, so on second though, mabye it's best to just go there.

TS3297 How do I purchase jewels from dragon vale with my iTunes card?

I'm trying to buy jewels on the game dragon vale, but the iTunes Store won't let me. I have $20 on my iTunes card. Can anyone help me?

Did you redeem it? What is happening?

How can I get the function of dictation in my Mac 10.6.8 without buying dragon?

I want to have the function of dictation in my Mac 10.6.8 Snow Leopard. I read that if I upgrade to ML I can have it, but it will not allow some softwares to work. Dragon is too expensive, so any other ideas???
Thanks!!!

There is no dictation facility built into Snow Leopard so you would have to obtain a third-party program; Dragon Dictate is the best known - I don't know if there even are any others; you could try Google.

Looking for a Dictation App for my Iphone and MacBook Pro. Want to send all dictation to Word. I have Dragon. Should I purchase Dragon Premium or Dragon for Mac?

Looking for a Dictation App for my Iphone and MacBook Pro.
Want to send all dictation to Word.
I have Dragon. Should I purchase Dragon Premium or Dragon for Mac?

Care to share which OS you are using?
OS has its own dictation program.
Should I purchase Dragon Premium or Dragon for Mac?
Only you can make that determination. Read the system requirements for both and read the reviews.

HT3648 I have an iPod touch 3rd generation. I would like to test it with talk to text for my deaf mother. I have downloaded the dragon program but I need an external microphone. Can you help?

Hello,
I think my iPod touch is a 3rd generation. It is a 4.2.1 Version, 8 GB.
My 89 year old mother has totally lost her hearing. I would like to experiment with my ipod touch to see if an ipod is what she could use in her assisted living arrangement.
My ipod does not have an internal microphone as far as I can tell.
I see on the internet that I can purchase an external microphone.
I do not want a headset microphone just an external microphone where someone could speak into when the dragon app is on and it will transfer talk to text for her to read.
Can someone help me: a) do you think this will work.
b) what do I have to do to make it work.
Thank you.
Yours truly,
anetatsk

Just Google for: mic for ipod touch. You will find my hits.
http://touchmic.com/
http://www.cellphoneshop.net/microphone.html?CAWELAID=513810317&gclid=CIP-svXuy6 8CFUGo4AodXy-xaQ

I am using Dragon NaturallySpeaking 10 (a speech recognition software) to navigate through Firefox, but ever since I downloaded the newest version of Firefox how can I download some older versions?

ever since I downloaded the newest version of Firefox, my Dragon NaturallySpeaking hasn't been working very well. For example, I will say "click register" or "click contact us" to select links and buttons on websites. Before this worked fine, but now it hardly works at all, which makes me think that because I am using a Dragon NaturallySpeaking program from 2007 or 2008, that it just doesn't know how to handle a program like Mozilla Firefox six that was written after its time. Or maybe it's the operating system? I was running an older version of Mozilla on Windows XP and now I am on Microsoft's seven.
What I want to try is to download an older version of Mozilla Firefox to see if the problems go away. I don't know if that would mean I would use Mozilla five or four, but I would like to try both. How can I do this, when I go to the website it says "you have the most updated version" and will let me access in the winter versions click post question that post question

This article has the steps to resolve this annoying problem: [https://support.mozilla.com/en-US/kb/Websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser Websites or add-ons incorrectly report incompatible browser | Troubleshooting | Firefox Help]

Biometric Reader no longer works on my Envy 17-j092r Laptop

Hello Consumer Support Forum
I purchased a new HP Envy 17-j092nr Laptop about 15 months ago that came with a biometric (finger print) reader. I just recently had to re-install the operating system and when I did that my finger print reader no longer lights up (blinks) indicating that it is reading my finger print. I remember before I re-installed the operating system under device manager I use to see a catagory "Biometric device" which contained the necessary driver for the hardware. When I look at my device manager now there is no folder for Biometric Device. I believe what I need to do is to download the driver but I have looked everywhere under HP drivers and not able to find it. I also would think when I boot my computer that it would detect that I have a biometric reader and automatically download the driver.
Any help on this would be greatly appreciated.
Thanks,
Jim

jblackst2800
Welcome to the HP Community Forum.
There are two parts to the fingerprint logon with Windows 8.1 - the Native fingerprint logon Biometrics for Windows logon -- and the ability to support Third party software, in this case, HP SimplePass.
The Native fingerprint logon is a feature of Windows 8.1 -- if it is still part of your Operating System, the infrastructure might show up on Programs and Features as Validity WBF DDK -- if you see such, Do Not delete it, not even should you get excited later and need to reset, reinvent, or reinstall your HP SimplePass environment. This is not related to your HP SimplePass and you need to leave it be.
=========================================================================
Your computer's Support Pages:
HP ENVY 17-j092nr Notebook PC
You can use this Validity Driver from your notebook's Support Pages:
Validity Fingerprint Sensor Driver
The HP SimplePass program you need is in the following file along with the instructions for installation.
==========================================================================
READ the first page -- nothing is garanteed. You can heap blame -- this software can be stubborn. Smiling.
Open the file > Click on Download > Click “Open in Adobe Reader”
Instructions to Upgrade HP SimplePass
Follow:
Procedure - Update / (Re) Install HP SimplePass
Reminders:
You will be using Series 6 HP SimplePass; ignore references to Series 8
Pay attention to Order of Events...
I hope it works.
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Fingerprint reader on DV6t no longer works on windows logon

For some reason the fingerprint reader on my Pavilion Dv6t, LM720AV, does not work on windows logon anymore
I get the usual lock screen where I have to enter my password. The fingerprint option no longer appears
I have tried rebooting, powering off, reinstalling the validity sensor package sp55109 and it still does not work
Any help would be greatly appreciated
Thanks

Export the Webcard Database:
If you have working SimplePass software, Export your Webcards before proceeding. In the event that you must later remove the SimplePass software, your webcard backup can be used (imported) to restore your website login information.
Start SimplePass > Settings > Export NOTE: File will be named *.tsd
Then:
Try / Consider:
===================================================================
The Hard Reset:
This method works for a variety of Driver connection and ‘stuck’ program issues.
Shut down the computer
Disconnect all external devices - everything.
Remove (disconnect / unplug) the AC power
If the notebook contains a removable Battery, remove it
Press and hold power button for at least 30 seconds
Reinstall the AC power cord for first startup ** See Note
Power on - Log in
Next time you shut down the system, reinstall the battery.
** Note: If time is short, reinstall battery the first time and be done with it.
Reference:
Hard Reset to Resolve Hardware and Software Issues
===================================================================
If that does not resolve the issue, then try this:
Repair the SImplePass Software:
Control Panel > Programs and Features >
Look for this program:
Right-Click on HP SimplePass
Select "Repair"
Restart / Reboot your computer and log in...
====================================================================
Kind Regards,
Dragon-Fur

Yoga 2 Pro/i7/8GB/512SSD Dragon Assistant and other (software) issues

Hi all,
I've been playing with my new Yoga 2 for a week now. I like how light, fast and quiet the machine is. I do however feel the machine is kind of buggy and wanted to see if anyone else was having similar issues. Windows 8.1 makes me feel like an idiot but I'm slowly learning how to customize everything to my liking. On to the issues:
1. I tried to download the Dragon Assistant installer and the installation didn't work properly. Now I can't find the installer anywhere on my computer to relaunch it. I am able to find it when I'm in control panel/uninstall program but I only have the option to uninstall from the machine, not repair it. Where the heck is the dang installer?!?
2. I wasn't able to download iTunes, after a few unsuccessful tries I went to an online forum and someone having the same issues posted an alternative link for the download and that seemed to have done the trick.
3. I have duplicate apps listed under my start pin, like the Lenovo phone compainon is listed under two different sections and it's driving me NUTS!
4. My screen seems to flicker everyonce in awhile, is this common with other Yoga 2 users?
I guess I'm trying to find out if others have had the same issues as I have, if there are solutions to the issues and if I should ultimately return the machine because it's faulty and try to get another one.
Any help/ advice would be greatly appreciated. Thanks.

emeria wrote:
I am glad to hear this because I have screen flickering too. I also have a problem with my Dragon not working correctly.
emeria & Dream2300...
Would you describe the "flickering" as though the panel brightness was stepping up (or down) a number of steps in very small increments? If so, what you may be seeing is the adaptive brightness feature at work. I have disabled it on my Y2P and see no flickering.
If you go into the advanced settings of your power plan, look for the Display settings near the bottom. Expand the tree and check the Adaptive Brightness settings. You may also want to check the Power section under the Intel HD Graphics Control Panel. Check the Display Power Saving Technology item under the On Battery heading. Mine is set to Off.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

I bought dragon dictate with my mac pro. NO DVD DRIVE.. now what do i do?

Can I return it and just get the dragon express in apps? My mom got this Mac book for school and I am paralyzed. I need a talk to text app. She bought the Dragon and we did not know the mac did not have a dvd drive (this is my first mac) PLEASE HELP. CAn we return the dragon dictate?

You have a couple options.
Depending on where and when you purchased the Dragon software, they will possibly, even likely, allow you to return the software if it is unopened. If you've already opened the packaging, it will obviously be more difficult to return. In that case, you might try reaching out to the folks at Dragon and explaining the situation. If they use license/activation numbers, it should be pretty easy for you to prove to them you haven't activated the software, and they might swap it or offer a refund.
Another option is to use an external DVD drive to install the software. You could purchase such a device (newegg.com, amazon.com, apple.com). Or, a better option would be to visit an Apple store, and ask them to install the software for you. That won't cost you a dime.
Don't fret! There are plenty of good solutions available to you. Good luck!

Reader 10 & Dragon

Similar Messages

Maybe you are looking for