Reader 11.0.03 problems
after being on hold for 50 minutes the rep said there are no problems with the version. prior to downloading this version i could open pdf files now i annot open the pdf files from trusted web sites and windows 7 will not download any version of adobe reader. the pop up says run save or cxl i want to download it and it does not happen
Try running the Adobe Cleaner and remove all traces of Reader from your system.
Then download the offline installer to put 11 back on. Sometimes a "fresh start" fixes it.
Similar Messages
-
Adobe Reader has encountered a problem and needs to close.
When reading PDF attachments, I get the following: Adobe Reader has encountered a problem and needs to close. I have tried to remove Adobe Reader via Control Panel, Add or Remove Programs but that won't work. I get this: This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package. I don't know how to do what is being asked. I have tried to download Adobe Reader again but get this when I do: Note: this application already installed.
I have Adobe Reader X (10.0.1) with an update installed on 2/19/2011. I have Windows XP SP3.
Anyone who can help me get Adobe Reader working correctly again or uninstalling it so I can reinstall.
Thanks for any help.Thanks for the input. Did you remove Adobe Reader 10 first before you downloaded the older version? If you removed it, how did you do that? The add/remove programs in control panel won't let me remove it -- it says a patch package can't be opened.
Date: Mon, 9 May 2011 00:12:41 -0600
From: [email redacted by moderator]
To: [email redacted by moderator]
Subject: Adobe Reader Adobe Reader has encountered a problem and needs to close.
hi
i had also the same problem with that version.
so i download older version and this solved the problem.
> -
Getting "adobe Reader has encountered a problem and needs to close
On Windows XP service pack 3. Adobe Reader X
Get "Adobe Reader has encountered a problem and needs to close." . I have uninstalled adibe and reinstalled it and problem came back within 2 weeks after working for a short time.Try the following:
Uninstall Adobe Reader X
Reboot your computer
Delete directory C:\Program Files\Adobe\Reader 10.0
Download the EXE or the MSI installer from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/ and execute e.g. either of the following files:
AdbeRdr1010_en_US.exe
AdbeRdr1010_en_US.msi
Good luck! -
I have a client that uses Windows that has recently told me she can no longer open the PDFs I send her. I can't find this elusive "Always Send Windows-Friendly Attachments" setting that I have read may solve my problem. Can someone get me there?
Dear Dan,
It was from InDesign that I was creating the shared pdfs. I was one of two Mac drivers in a corporate sea of Win users and had to make the change I mentioned in order for the Win users to see my pdfs for review. The difference from what you appear to be doing was that were all on an MS Exchange Server so the files were shared over the company's Exchange Server e-mail system. However, some of these files occasionally went to outside users via regular e-mail and those people had no issues either.
So what I did was tested and worked for years.
You might look at the Adobe forums or Knowledge Base to see if that is a reported issue with newer version of CS. I was on CS2 when I was doing this, and the other Mac driver was on CS3 but had no problems either.
Some Win users I've talked to find a problem opening some pdfs (not mine) in general and found they had to open Reader first and them open the file from Reader's File menu. That most often happened if the client was using an outdated version of Reader. -
I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Reader 9 PDF printing problems
I have a Kyocera FS-C5015N. When I print any multi-page PDFs to the FS-C5015N, only the first page comes out or nothing at all. I have tracked the problem down to Adobe Reader 9. I say this because I can successfully print multi-page PDFs using version 8.2. But I cannot with v9. I have downloaded the latest drivers from Kyocera's website. Same problem. I can successfully print with Word, Excel, etc. just not Adobe Reader v9. Any ideas on what I can do to resolve this issue? Thanks.
I do realize that not all printers are affected. However, the problem is clearly with Adobe Reader 9. The reason I say this is that the problem does NOT exist with Adobe Reader 8. The problem ONLY occurs with Adobe Reader 9. Furthermore, I am not sure what specific resolution to this printer you are referring to, but there hasn't been a solution presented thus far that is an actual fix for the problem. Originally, I identified that if I selected "Print to Image" the entire multi-page PDF would print as expected. Although, this solution causes the multi-page PDF to print very slowly (for the reasons noted by Mike). Another reader reported that if you install FoxIT PDF Reader, multi-page PDFs print just fine. I have verified that installing FoxIT Reader DOES INDEED allow me to print multi-page PDFs to our FS-C5015N. Again, if it was purely a driver issue, why would a multi-page PDF opened with FoxIT Reader print as expected while the same PDF opened with Adobe Reader 9, not print as expected? There also were a couple other posts about using the generic Kyocera KX driver. This is not an option for us. Finally, there was a post about changing the Post Script driver setings. We do not use the Post Script driver. And just as a side note, we have tried using the Post Script driver to see if this will resolve the multi-page PDF issue, and it does not. With that said, I implore Adobe to once again acknowledge this problem and provide users with a fix. This is a very frustrating problem.
-
Reader 10.1.4 problems with download
Hi All
I have been trying to down load a newer version. The doc i am trying to get is written on a newer version of reader.
The bank links me to the corect down load which i follow but i keep getting the same problem.
A box pop up saying "File in use that need to be updated are currently in use"
followed by " the following applications are using files that need to be updated by this setup. close applications and click retry to continue"
It say the problem is with Abode Reader 7.0
The problem i have is that i have not got any application open except the ones relating to the new download.
What do i need to do.
do i need to uninstall Adobe reader 7 or what?
HELP
Cheers
paulYou should uninstall your current Reader version before updating to a newer version that is several versions higher.
Download the installer from http://get.adobe.com/reader/enterprise/ -
I cant seem to be able to update to iOS 6.1 through my PC for my iPhone 5...The error reads: 'There was a problem downloading the software for the iPhone 'Thomas Honiball'. You do not have permission to access the requested resource".... please help!!
Only developer's have access to iOS 6 now. Thus, if you are a developer you have have access to the developer's forum for iOS 6.
Otherwise you have a bootleg copy and are on yur own./ -
Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN -
I installed a buyed version of Adobe Photoshop Elements 13. But is not possible to start the programm. I can read "There ist a problem, the program is not able to start". Is someone able to helb me?
Without system information and other details we can't know what might be going on.
Mylenium -
when I hook up ipod up to to itunes it reads: IP F There is a problem with this drive. scan the drive now and fix it. When I do this, nothing happens.
Hello,
I found the same issue. I have an iPod Classic 160 GB (Black) bought in April 2013. I'm using a Windows 8 Laptop bought in August 2014.
This is my account of this problem and why I think customers should just ignore the pop-up, but Apple (and possibly with Microsoft/Windows) should look at the issue.
Recently (approximately from early February 2015), when I connect the iPod to my computer I get a message saying there is a problem with the drive and it needs to be scanned and fixed. In full the message reads:
There's a problem with this drive. Scan the drive now and fix it.
This message appears very shortly and then immediately (once the message disappears, is clicked on, or x-d) brings up Windows File Explorer on the drive and its containing visible folders: which tells me nothing (though it can clearly open it and look at the files not locked to iTunes)
Other than this, the iPod seems to connect properly and work fine. iTunes (ver: 12.1.0.71 64bit) seems to find no issue. The iPod runs fine, it syncs properly (all of my music and podcasts). It responds as it always has and works for hours.
I did some troubleshooting: first on the wire, trying all ports and using an alternative, then on my laptop (all usb ports with other connectors and device drivers) and some basic testing of the iPod and iTunes. All of these seemed fine to me, no issue whatsoever other than the message every time I connect the iPod. So I just ignored it for a while.
Anyway, eventually I got curious (and had some more free time to look at it) and let Windows 8 do what it wanted (scan and fix the drive). Clearly the iPod works fine, and I have nothing important on it that isn't on my computer, so at worst Windows will break the software and I'd have to reformat the drive through iTunes (and Restore to Factory Settings) which I feel fine doing. I also took note of all of my settings on the iPod (like EQ, and the way I laid out the menus etc...) so I can redo those from defaults.
Prior to doing this, the iPod was version 2.0.5 (the latest version).
When I set the drive to be scanned, windows told me it identified the problem and would fix it. I don't remember the exact wording, as this message was immediately obscured by a pop-up telling me the drive was in use and software using it should be closed. So I closed iTunes which in turn caused the pop-up and message to disappear.
Windows then said it had succeeded and brought up the File Explorer of the drive again (now with some folders missing). When I loaded iTunes back up, it told me there was a problem with the iPod and it would need to be restored. Ejecting the iPod showed that it seemed to believe it had no content on it.
So I restored the iPod through iTunes, downloading the latest iPod update again and started syncing the iPod. After adding a couple songs, I ejected it and played them - they worked fine, the menus had returned to defaults but I quickly changed them to how I liked and overall the iPod is back to how it was. I've now set it to sync the remaining thousands of songs (and couple hundred podcasts). Edit - by the end of this post, this has finished copying Music, Podcasts, and Playlists. It's back to exactly how it was before.
Annoyingly, this has not removed the pop-up message when I connect the iPod, still the same as before - the most irksome thing being the file window opening every time i connect the iPod, though this is still minor (I just have to remember that this will happen and manually close it each time).
So I'm at a loss on the cause, and am going to return to ignore it. I'd greatly appreciate if Apple could look into this. I'm wondering if it is a recent update to iTunes or to Windows, but I don't trust that I won't be able to undo changes if I myself began looking through them (and I lack the time and expertise to do that effectively). I think there might be that Windows is detecting something in the way that Apple formats their iPod drives that it believes is an issue (even when it isn't). My guess is the way of formatting is unchanged (the iPod hadn't received an update recently to suggest and alteration to this) but maybe the things Windows is looking for may have slightly changed and disagrees with Apple's way of keeping the iPod Drive proprietary to iTunes.
TL,DR: Advice to others (and Ljchicago) searching this topic is to ignore the message for now.
Thanks,
Dixavd -
I upgraded to iOS 7 to my ipad using iTunes. When signing with the Apple ID I get an error reading "There was a problem connecting to the server" anyone who knows what to do next
Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
https://appleid.apple.com
if you can sign in there, try to sign in to itunes on your computer. -
Adobe Reader 10 + Plugins = Adobe Reader has encountered a problem and needs to close.
Platform: Win XP SP3 and Win7 SP1 (both 32bit)
Problem experienced with both Reader 10.0.1 and 10.1
To eliminate our custom plugins as an issue, we've performed our testing using a generic plug-in using the Adobe plug-in creation method.
We encounter this error ~3 times out of 5 tests.
When using a plugin I recieve the error about 2 seconds after I close Reader.
This is the message displayed in "more information":
Error signature
AppName: acrord32.exe AppVer: 10.1.0.534 ModName: acrord32.dll
ModVer: 10.1.0.534 Offset: 0001912dspartan@343 wrote:
I can start PSE but when I start the organizer I get the error once the organizer opens.
You haven't said how are you starting the PSE? There are many ways, of course, but the two main methods are:
1) clicking on the desktop icon
2) Start/Windows Logo >> All Programs > Adobe Photoshop Elements
Now I suggest use the second method and then go into Edit first. Once you are in Edit, click on the Organizer icon on the top right corner.
This should start the organizer. Hopefully this would fix it forever when you exit from the PSE because the settings are normally saved on exit.
The above is an adaptation of this thread:
<http://forums.adobe.com/message/4597703#4597703>
Good luck. -
Reading file and parseInt - PROBLEM
Hi, I am trying read from .txt file but I have a problem when I use Integer.parseInt. Can you see what could be wrong in this source:
public String loadPlayerFromTxt() {
String result = "";
try{
FileInputStream fstream = new FileInputStream("Test.txt");
DataInputStream in = new DataInputStream(fstream);
BufferedReader br = new BufferedReader(new InputStreamReader(in));
int position = 0;
while ((br.readLine()) != null) {
Gamer gamer = new Gamer();
gamer.setName(br.readLine());
gamer.setRace(br.readLine());
gamer.setRole(br.readLine());
gamer.setLevel(Integer.parseInt(br.readLine()));
String [] array = new String [6];
String abilities = br.readLine();
String str = abilities.trim();
//System.out.println(abilities);
array = str.split(",");
gamer.setStrength(Integer.parseInt(array[0]));
gamer.setEndurance(Integer.parseInt(array[1]));
gamer.setDexterity(Integer.parseInt(array[2]));
gamer.setIntelligence(Integer.parseInt(array[3]));
gamer.setWisdom(Integer.parseInt(array[4]));
gamer.setCharisma(Integer.parseInt(array[5]));
this.gcollection.addGamer(gamer,position);
position++;
result = "succesful";
in.close();
catch (Exception e){//Catch exception if any
System.err.println("Error: " + e.getMessage());
e.printStackTrace();
e.getLocalizedMessage();
return result;
Error message is:
Error: For input string: "12, 15, 19, 9, 14, 7"
java.lang.NumberFormatException: For input string: "12, 15, 19, 9, 14, 7"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:456)
at java.lang.Integer.parseInt(Integer.java:497)
at ca5.GameControle.loadPlayerFromTxt(GameControle.java:56)
at ca5.GameControle.main(GameControle.java:112)Pavel.Prochy wrote:
Hi, I am trying read from .txt file but I have a problem when I use Integer.parseInt. Can you see what could be wrong in this source:
Error: For input string: "12, 15, 19, 9, 14, 7"
java.lang.NumberFormatException: For input string: "12, 15, 19, 9, 14, 7"The Integer.parseInt() method expects a String that contains only numbers. You are passing it the following string:
12, 15, 19, 9, 14, 7Which contains punctuation and whitespace (i.e. not just numbers). When the string you pass to Integer.parseInt() contains anything but numbers you get the "NumberFormatException" thrown. What you need to do is to do some pre-processing on the string you read from the file or (ideally) change the format of the file so that you have each of the numbers on their own line rather than having multiple numbers on the same line. If you HAVE to keep all the numbers on the same line then you will need to do the following (or something very similar to it):
public class Tester3 {
public static void main(String[] args) {
String input = "12, 15, 19, 9, 14, 7";
String[] strings = input.split(",");
for(String string : strings) {
int parameter = Integer.parseInt(string.trim());
System.out.println("parameter: "+parameter);
}Program output from above code:
parameter: 12
parameter: 15
parameter: 19
parameter: 9
parameter: 14
parameter: 7When you use the Integer.parseInt() call you should consider the possibility that your input will cause the call to fail. You can pre-process the input to ensure it will not fail, catch the NumberFormatException by wrapping the call to Integer.parseInt() in a try-catch block or create a method in your class that throws a NumberFormatException to its caller and let the caller handle the error
Edited by: amp88 on Nov 4, 2009 2:26 AM
Edited by: amp88 on Nov 4, 2009 2:27 AM -
I'm not able to send emails with mail.ru. Receiving is not a problem. Creating a mail is also not a problem and the mail will be stored at mail.ru as still to be send, only problem is its not possible to send. I noticed the buttons for sending change colour when used but they don't perform. What it is?
Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.
-
My Apple TV is reading " There was a problem connecting to the network" error - 3906
I have reset all network components and the Apple TV. I first set up Apple TV and it worked beautifully. The next time I turned it on it gave me the error message. I have tried reconnecting to the netwrk multiple times. I have my laptop and my ipad connected to the network, but the Apple TV will no longer connect. I am out of solutions. Any suggestions would be greatly appreciated. Thank you.
I had the same problem. I just solutioned it just by disabling MAC Address filtering in my LinkSys router. This is strange as I did enter the address of my ATV3 in the list of allowed devices in the router configuration software.
The truth is that it now works! I just seems that ATV is not compatible with MAC Address filtering.
Maybe you are looking for
-
Line Item Sorting in Payment Proposal in F110 (Automatic Payment Program)
Hi all SAP Gurus... I really need a help here... In FBZP, I set up 'note to payee lines on the form' restricted to 17 rows. And the sorting for line items, I use 'document date'. For example, I have 68 open items. When I run F110, in the payment prop
-
'Error Occured in the Source System' for Non SAP system
Hi Gurus, We have an Info Package which is getting the data from the Source System 'DOCP' and it has failed due to 'Error Occured in the Source System'.Since the source system is Non SAP system there is no option 'Replicate Data Sources'.So,First I a
-
Regarding cisco storage level certification
Hello, i am planing to write cisco storage certification. so i would like to know from what level of exam i need to start & what will be resources(like books,documents) i need to refer for writing my exams. appreciated for your help. Thanks
-
5-in-1 Card Reader on T410i / Windows 7 x32
Is there a post, or website, spelling out (in simplest terms) how to set up this onboard device from BIOS (if necessary) onward to full function? I want to start this from scratch since, to date, I've tried too many times and had no luck. Surely som
-
Why iMovie files won't open in iMovie?
I have iMovie files that won't open when I click on them. iMovie opens but the files don't. What is wrong?