Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

I'm not 100% sure, but I believe you need Acrobat Pro for that.

Similar Messages

  • Firefox will not load pages when I use my back button

    It is just doing this on the one site

    Does this happen when you are both logged in and out of the website? I have tried accessing the website myself and I am able to access the site and use the back button on this site without logging into the site. If this only happens when you log into the site most likely it has to do with the login session that causing this problem.

  • "Non rectangular objects will not appear correctly when exported using CSS."

    I am using Ind CC 2014 exporting a document to a reflowable epub.  The document contains an .ai image.  The image exports correctly in some parts of the.epub but not others, where it is distorted. There is a warning on export :"Non rectangular objects will not appear correctly when exported using CSS."  Any suggestions appreciated.

    Thanks!
    >
          "Non rectangular objects will not appear correctly when exported
          using CSS."
    created by pooja2087 <https://forums.adobe.com/people/pooja2087> in
    /InDesign EPUB/ - View the full discussion
    <https://forums.adobe.com/message/6886892#6886892>

  • Collating Pages when printing

    I have just bought an Epson PX710W printer and attached it to my iMac. All works well except when printing documents with multiple pages I want them to print out in reverse order, so I select 'collate'. However whether collate is selected or not the pages just print out the same, i.e, in the order I do not want. Instead of printing pages 10 - 1 for instance, so that the result is a collated document I always get pages 1 - 10. The collate tick box appears to have no effect.
    Epson tell me this is a function within the OS that is overriding the setting within the printer dialog box.
    Where can I look to resolve this so I can get printed pages collated?

    "Collate" is not the same as "print in reverse order." To collate means that if you print multiple copies of multiple-page documents, the copies will be grouped such that each full document has all the pages in order.
    For example, if you print a five-page document ten times, you might get ten page ones, ten page twos, and so on in piles. Selecting "Collate" means that you'll get ten sets of pages 1-5.
    So what you need to do is look for an option that says "Print in Reverse Order" or something similar.

  • How can i collate pages when printing multiple copies in reader?

    i want to print 6 copies of a 12 page document. the new reader app allows multiple copies but does not have a collate button in the options???
    Any ideas ?
    Thanks

    Hi,
    Make sure you install the latest printer driver applied to Windows 8.1.
    Would you please let me know the full name of the Reader? Did you mean the PDF reader?
    We can also try to install the printer driver for Windows 8 in compatible mode to see what's going on.
    Keep post
    Kate Li
    TechNet Community Support

  • Safari will not load pages when connected to internet

    I have just received a new mac book through work and find that I am unable to load any pages when in a wirless hotspot or at home using Safari even though the Airport and the connection help tells me that i am connected to the internet.
    Does anyone have any ideas why this is? Might it be something to do with the way it has been configured?

    Hi Derek
    Welcome to Apple Discussions
    Go to your System Preferences (via the Apple Menu in the upper left of the screen) and open the Network panel. Select your connection on the left, then select "advanced". Click on the DNS panel. There, enter the following DNS codes:
    If you live in the US - 4.2.2.1 and 4.2.2.2
    These are Verizon codes for the general public
    If you live outside the US - 208.67.222.220 and 208.67.220.222
    Select OK when done. Then "apply".
    Restart Safari.

  • IMac will not boot up when printer is plugged in USB

    After buying my new iMac (with Tiger) I successfully transfered everything from my old iMac (with Panther) and all was well.
    The problem is that when my printer (Canon Pixma MP130) is plugged in on start up, the iMac will not boot up (no gears turning on the white/grey screen). When I unplug the printer from the USB and start it up, it works fine. Its not a super big deal because I can just plug the printer in when I need it. But why does it do this?
    I foound on the internet someone else who had the same issues. It was suggested to him to search the printer manufacturers website for updated drivers. I did this, installed them etc..... still no luck.
    I am without any mac guru's here in Yellowknife......help!
    Angie

    Hello there,
    I hope it is OK to recycle this old thread.  I did not want to create a new one since I am experiencing the exact same issue as the original poster *flying girl* as well as other posters in the following threads:
    http://discussions.apple.com/thread.jspa?messageID=4190807
    http://discussions.apple.com/thread.jspa?messageID=3950255
    http://discussions.apple.com/thread.jspa?messageID=4201169
    http://discussions.apple.com/thread.jspa?messageID=4490899&#4490899
    http://discussions.apple.com/thread.jspa?messageID=4470944
    I have two Macs, a PowerBook G4 and an Intel iMac 20" (Aluminum)--please refer to my signature or profile for the specs of these machines.  Of course, I got the PowerBook before I got the iMac.  I am running the latest version of the Canon MP130 drivers, printer drivers version 4.8.3 and scanner drivers version 12.11.0, on both machines.
    When I turn on my PowerBook with the Canon PIXMA MP130 multifunction turned ON and connected via USB to the PowerBook, the PowerBook boots up just fine.  I have even experimented with both a USB hub and a direct connection to the Canon MP130, and the PowerBook boots fine in both instances.
    However, when I turn on my iMac with the Canon MP130 turned ON and connected via USB to the iMac, the startup tone plays, and then the iMac hangs at the blue/gray solid screen--it does not even show the Apple logo or the spokes--that is, until I turn the Canon MP130 OFF.  When I turn it off, the Apple logo appears, the spokes move, and my iMac boots up just fine.  And as long as the MP130 is OFF, I can boot the iMac fine from scratch too.
    I tried starting in verbose mode (⌘V) and single-user mode (⌘S), and the gray/blue screen still appears after the startup tone plays; again, if I turn the Canon MP130 OFF, the rest of the boot sequence resumes as normal, and only then do I get to see the descriptive text for those startup modes.  But the text goes by so fast that I miss most of it--I did manage to catch something that said something like "get full config descriptor = NULL," but I am not sure if that was the exact wording.  I would need a good camcorder or even just a digital camera or another device to capture exactly what the screen says in verbose mode.  If I had those options, I would post pictures here.
    I was thinking about contacting Canon, but since the issue happens on one Mac only, I figured they would tell me that it is a problem with my Mac.  So hopefully posting the information here is OK.
    Another key feature is that the Canon MP130 has a built-in card reader.  I made sure that my Startup Disk preferences were set to boot from the system drive, and they still are.  And I have reset the SMC and PRAM on the iMac.
    I would like to mention the following link:
    http://www.ehmac.ca/anything-mac/50389-intel-imac-wont-boot-when-canon-printer-p lugged.html
    If you go to page 2 on that above thread, it shows one user who allegedly physically disconnected the card reader connection from the inside of the Canon MP130 (I would NOT recommend that myself).  I just wonder if there is a more feasible resolution to this issue.
    Does anyone else experience the same issue with other printers or multifunctions?  Also, why does the issue occur only on my Intel iMac 20" (aluminum), and NOT on my PowerBook G4?
    Please let us know about your experience as it seems many of us are at a loss for a solution.
    Thank you very much for your help; we await!  :)
    Cya!
    \m/ Mad Metal Mage \m/

  • Hp laserjet pro color mfp will not wake up when print tasks are initiated!

    Is there anyone that can assist me with a HP LaserJet color printer mfp 200 that weill not "WAKEUP" when print tasks are sent to the spooler?

    These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and make your router secure and hack proof.
    1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual). 
        This is for Linksys routers but can be used for all routers.  Verify your DHCP range and change this
        first if needed.  More Wireless Printing help is here.
    2. Verify in the printer that 'Auto Off' is disabled.  Use the Embedded Web Server (EWS) by going to the  
        printers IP address in your browsers address bar, click  Settings Tab/Auto Off.  Or use the Printer
        Assistant, Printer Home Page (EWS). 
    In the router:  (Refer to your router manual for information)
    3. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest. 
    4. Set router to 20Mhz only, or 145Mbps depending on router. 
    5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode. 
    6. Disable WPS and never use it and disable UPnP for the routers security.  Nobody can hack your
        system now and helps with wireless connectivity (if you want to know why, search the web). 
    7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
        they must be different for all bands, even for any Guest networks. 
    8. Save all settings.  Power off both, wait 2 mins.  Power on router wait 2 mins. 
    9. Power on printer and verify it reconnects to router. 
    Windows 7/8/8.1   Is Network Discovery on or off?
    Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
    Under Home or Work (current profile) / Network Discovery.
    Select "Turn on network discovery" and save changes.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Ipad 2 will not find me when i use or maps, but it will in the office - all wireless

    My iPad 2 will not find my location when I use Maps when i am out of the office but it will when I am in the office - i use wireless. Location selector is ON.
    Any ideas?

    belvoirfarm wrote:
    Thanks for the quick reply.
    my location is found when i am in my office and wireless (don't have 3G)
    When i am home and connected to my wireless router - ( and i am connected as i surf the net, get emails etc.) it says it cannot find me.
    That's because the location of your home router is not yet in the router location database.

  • Will not display page that is used often...

    Hi.
    I use rapidshare.com and my home page is blingo.com. Yesterday all was well. I was downloading files, and searching with my home page. Today when I power on the computer my homepage does not load anymore. Neither will rapidshare.com. I have another computer in which i tried to access the pages and it works fine as well as my iPhone. I've tried to repair permissions for my computer and I reset Safari but no luck. Any ideas on what can be happening?
    Thanks in advance

    Is it maybe because CS3 does not include the cross references function (not a feature until CS4)?
    That's a real problem if we use an outside source to create a lot of our documents and they're working in a previous version.

  • Labels are not aligned properly when printed using HP5610

    Hi ,
    I am trying to print Avery J8160 labels using my HP 5610 Officejet. I am using official Avery templates and have checked all printer settings, there are no issues.
    Everything is fine if I use plain paper but if I use Avery label A4 sheet, the alignment goes out. It's as if the label paper is not being drawn into the printer properly. All print settings are fine. I have contacted Avery and they have no explanation. Avery infact said that there is issue of alignment with printer and contact HP for finding solution. And they said most probably its something to do with printer treating both papers differently and some kind of skidding on rollers or something else resulting into this issue.
    I have just done a quick test, I removed top row of labels and then feed the sheet and everything is fine. To me somehow seems that its thickness of label sheet and somehow printer start printing before actual print area on sheet starts. While in case if paper is thin (normal paper or top row of labels removed) , everything is fine.
    Any help would be great, I have already wasted many sheets of labels.
    regards
    Maninder

    Which SQL client and Linux version are we talking about?
    Assuming you are using the Oracle sqlplus client... it does not support command line editing and history using the arrow keys. For this to work you will have to install a product called Readline Wrapper. See my answer at the General Database forum:
    sqlplus command line editing

  • Adobe Reader 11.0.10, will not print.  Mssg "There were no pages selected" How do I print?

    Adobe Reader 11.0.10, will not print.  Mssg "There were no pages selected", even with pages selected.  Tried "Image", same mssg err.;  Printer has latest drivers.  Printer prints everything else (browsers, docs, .xls), but not Adobe.  Used cleaner to unistall, received Error: 5 on GetNamedSecurityInfo, and Could  Not Set Owner.  Any help would be greatly appreciated.  Thx

    Thank You very much !!!
    Security (Enhanced): disable 'Protected Mode at startup'
    has me back printing 
    How do I mark that you resolved my problem?

  • Reader 10.1.0 will not open PDF files

    Hi
    Reader 10.1.0 will not open PDF files in windows 7 64 bit using IE9
    However it open using firefox?
    Is it my settings ?
    Is this version not compatible with IE9 ???
    Please advise
    Thanks
    Perry

    I am able to open PDF in IE9 on win 7 64 bit machine using Reader 10.1
    Additionally,as per system requirements mentioned in Reader 10.1 download page (http://www.adobe.com/support/downloads/detail.jsp?ftpID=5138),Reader 10.1 is compatible with IE9.
    What error message do you encounter when you try to open PDF in IE9?

  • Adobe Acrobat Reader 8 Pdf files will not open normally

    This applies to all Pdf files.
    Double click or right click>click "open." 
    Receive:  Adobe Acrobat Reader is required to view the file.  Would you like to install Adobe Acrobat Reader now?
    I had Adobe Reader 9.  Experienced problem described above.  Uninstalled and installed version 8.  Same problem.
    I have three computers with only one with this problem.  PC Windows XP SP3.
    Please advise.
    Robert.

    I have opened: https://courses.worldcampus.psu.edu/public/diagnostics/Acrobat.html I click on test page and it downloads Acro_Test.pdf 5..8kb -- psu.edu,then I open the page, the hour glass comes on and goes off without ever opening. The Reader software in my program file.
    Don't keep sending the same message. it does'nt work
    Paul
    From: kglad
      To: ps walker
      Sent: Monday, April 08, 2013 2:43 PM
      Subject: Adobe Acrobat Reader x11.0.02 will not open
            Re: Adobe Acrobat Reader x11.0.02 will not open
            created by kglad in Downloading, Installing, Setting Up - View the full discussion

  • Adobe Acrobat Reader x11.0.02 will not open

    Adobe Acrobat Reader X11.0.02 will not open on my windows computer.

    I have opened: https://courses.worldcampus.psu.edu/public/diagnostics/Acrobat.html I click on test page and it downloads Acro_Test.pdf 5..8kb -- psu.edu,then I open the page, the hour glass comes on and goes off without ever opening. The Reader software in my program file.
    Don't keep sending the same message. it does'nt work
    Paul
    From: kglad
      To: ps walker
      Sent: Monday, April 08, 2013 2:43 PM
      Subject: Adobe Acrobat Reader x11.0.02 will not open
            Re: Adobe Acrobat Reader x11.0.02 will not open
            created by kglad in Downloading, Installing, Setting Up - View the full discussion

Maybe you are looking for