Reader 11 & Canon printers - duplexing

Running Reader 11.0.2 on OS 10.8;  have two Canon printers (LBP3360 & MP970) both of which have the latest drivers (the former is the Canon UFR II driver, the latter via OS X) and both of which can duplex print.  However, the duplex print option doesn't show in the Reader print dialogue.
Anyone have any suggestions?
Thanks,
Andy

74 views but no replies
Doesn't anybody use a network printer?

Similar Messages

  • Apple 's new drivers for Canon printers

    Apple has just released new drivers for Canon printers. I have an i9900 inkjet printer which is not listed in the supported printers. Will the driver work for me or am I out of luck?
    Thanks.

    The driver update is supplied to Apple from Canon, who has made the decision to end support for the i9900. They actually ended support several versions previously.
    So to print from Mavericks to the i9900 you can download and install Gutenprint v5.2.9 which lists the i9900 as a supported device.

  • 10.5.7 and Canon printers

    Has anyone else had connection problems with Canon printers following the installation of 10.5.7? With 10.5.6. on my Air I connected happily through Bluetooth with a Canon iP100. However once 10.5.7. was installed I kept getting error messages. I tried reloading software first from disc and then from Canon website. I also followed instructions from one site to clear everything out of hard disc and start again:no joy.
    I have bought a new 2.13 (not for this reason!) and am keeping it on 10.5.6 until the fault is acknowledged and cured. It works perfectly with the iP100.

    I, too, am having problems with printing photos on my printer (Canon iP4000) since getting the new iMac with OSX (10.5.7) and using Photoshop Elements 6. The Canon printer driver (and all my other data) were copied to my Mac by the techs at the Apple store from which I purchased the iMac. (I previousy had a Mac G4 with OSX 10.4.11 Panther.)
    Photos that used to come out crystal clear and brilliant with the printer on the G4, now are faint with kind of a white veil. When I try to print in Elements, I get a message that says "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer." I really have no idea what that means. :-S
    Text printing comes out fine, both from word processing documents and web pages. I am using the latest printer driver (4.8.3) for the iP4000 (probably 3 years old or so), and there are no new driver downloads available for it. I tried reinstalling the current driver, to no avail. I was, however, able to successfully download a new driver for my scanner.
    Does anybody know if this means I need to get a new printer? If so, any suggestions on a good, relatively inexpensive one for Leopard and Elements 6 on the iMac?

  • Canon Printers

    I have 3 Canon Printers of various ages which all work fine with Yosemite. I had noticed there was no Driver on the Canon website for my Pixma ip4300 so I emailed them to inquire when they would have one. I got the reply that I could forget it and get another printer since they had no intention of developing a Driver for either Mavericks or Yosemite. This was a surprise to me since the printer had been working fine with Mavericks. When I installed Yosemite I restarted the computer and decided to try the 4300 anyway. It works fine. I replied to Canon that it worked but got no answer to that, only a sales reply to buy more Canon printers. They don't know their own product.

    The ip4300 is supported with the most current OS X Canon Printer drivers. Might be why it works in Yosemite assuming you installed the 3.1 drivers.

  • Do any Canon printers AIO print with one empty cartridge?

    We are looking for a new printer all in one AIO, anyone have ideas, looking at MX922 at Costco.  We would like one that will print if a cartridge is out, considering how many cartridges these have.  Thanks for any help.

    Hi vanbass!
    Unfortunately, none of Canon printers will print when an error condition is present.  When an error condition occurs, the printer stops functioning until the error has been corrected.  This is the same with all of our printers.  The best thing we can recommend is to keep an eye on the ink levels and replace the ink when it gets low.  If you only print in black ink, then we recommend using Plain Paper and Draft or Standard as the quality setting.  This will ensure that only black ink is used.

  • I have two Canon Printers, an MP970 and a MX710, I want to use both to scan, but the Canon Solution

    I have two Canon printers an MP970 and an MX710, when I installed the MX710 it disabled my ability to access the MP970 SCANNER from the Canon Solution Menu.
    I have tried to re-install the drivers and the MP970 Solutions but even that only allows the scanner in the MX710?
    IS there any way to use the scanners for both? AND what do I need to do.

    Hi bburtjr,
    The MP970 and MX710 use two seperate versions of the Solution Menu, so I think what is happening is that it copied over your desktop shortcut with the latest version which nly shows the 710.  If both versions of the Solution Menu are still on the computer, they should be accessible under your Start Menu if you are using Windows or your Applications Menu if you are on a Mac.  Under the Start Menu you would go to All Programs and Canon Utilities and it should list two seperate versions of Solution Menu.  The newwer version being for the 710 and the older being for the 970.  On Mac, if you click Go from Finder, and click Applications, you should have the same Canon Utilities folder and the same applies as it does in Windows.  You should have two versions of Solution Menu, one for each printer.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Yosemite - Canon printers stopped working 'filter failed'

    This is a curious tale. I have a MBP Retina Late 2013 and connect to a Windows network. I have two Canon Image Runner printers on the network. To install them, I downloaded the drivers, then in ADD PRINTER, chose 'Windows' and chose the printers from the list presented. All good so far.
    The printers have worked fine for 8 months.
    Two weeks ago all MS Office programs started crashing whenever I tried printing from them. I've had issues with Office on a Mac before so, because I was very busy, I put dealing with this issue into the 'eventually' basket.
    Last week Adobe Reader crashed when printing a pdf. Illustrator and InDesign printed fine, however, for a couple more days, but then they too failed to print (but the programs didn't crash). When I looked at the print queue I had the message 'Printing Stopped - 'filter failed'. This happened every time, whether I printed from any program (Word, Pages, InDesign, Illustrator, Reader, Acrobat Pro) or to either Canon printer. A search online threw up all sorts of reasons, mostly having to do with upgrading to Yosemite and the drivers being Sandboxed. But I had been printing successfully for months on Yosemite, and there had been no recent updates to the OS.
    After contacting the firm's IT support (Windows, with few clues about Mac), they suggested uninstalling the printers and reinstalling them. Which is where things got really curious. I deleted all the printers, rebooted, and went to ADD PRINTER, but where the network had earlier given me a list of available printers, there was nothing. Also curious, I suddenly had an Oki laser printer installed (Bonjour). To satisfy my curiosity I printed something to the Oki printer, and it went through. I then searched through the building for an Oki printer, found it out in despatch, and sure enough there was my print job.
    I tried to delete the Oki printer, but whenever I reboot it comes back!
    At home I have several printers (all deleted when I purged the printers at IT Support's request) and I reinstalled them successfully. A Fuji-Xerox and 2 Brothers all print fine.
    The problem, therefore, has to lie with either Canon printers specifically, the Windows network or ghosts. Nobody else uses my MBP and the IT Support denied any recent upgrade to the server or software.
    I really, really, really would like to be able to print at work, and the guy out at despatch is getting annoyed whenever I send something his way. Has anyone had a similar issue, or does anyone know what the heck is going on?

    Is it necessary for you to print via the Windows share? If not, then I would suggest you look at printing directly to the imageRUNNERs. To do so you will need to determine their IPv4 addresses, as the imageRUNNER series does not currently support Bonjour, so you will not see them in the Default view of the Add printer window. Once you have the IPv4 address for each imageRUNNER, you can add them by selecting the IP icon (instead of Default or Windows) and entering the IPv4 address. You then set the Protocol to HP Jetdirect-Socket and leave the Queue field blank. You can then change the Name from the IPv4 address to something more meaningful to you and you can enter a Location if so desired. Then the last step is to select the supporting Canon driver in the Use menu.
    If IT says you must use the Windows share then the ability to see a shared printer has nothing to do with an installed printer driver. So when you select to add the printer and select Windows, you should see the list of Workgroups and Domain names. Assuming you do and select the appropriate one the Windows print server belongs to, then you should get a prompt to authenticate to the server. Here you can enter your Windows domain account and this should result in you seeing the shared print queue. Does this happen?

  • Is there a PS setting where it can read my Canon Mark 3 5D's monochrome setting so that the files will also appear in monochrome instead of colour? Or do I have to change from RAW each time to Monochrome within PS (even if I have set up for Monochrome in

    Is there a PS setting where it can read my Canon Mark 3 5D's monochrome setting so that the files will also appear in the same monochrome structure (instead of appearing in colour as it is now when i open in PS, not even monochrome)? Or do I have to change from RAW each time to Monochrome within PS (even if I have set up for Monochrome in my 5D)?
    1. Basically I am taking photos with a monochrome setting with my 5D and the screen shows monochrome.
    2. when i import this onto my computer and open with PS, it opens in colour.
    3. when I change this to Monochrome in PS. (It cannot read my monochrome setting with my preference of the greyscale mix when I viewed it on my 5D)
    4. my question is: is there a way so that PS can read the monochrome setting from my 5D and display the same monochrome setting as my 5D instead of a different one from PS.
    Lily

    you need camera raw 6.7 or better.
    i don't know what version of ps you have so i can't say if it can be updated to use that, but update anyway.
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html
    if you can't update your cr sufficiently, use the dng converter. DNG Converters:
    Win
    Mac

  • I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

    I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

    There may be some security issues related to the USPS PDFs.
    http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
    I can't help with the scan/print problem. You seem to have done everything I would try.
    I don't know if maybe using a registry cleaner would help.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Adobe photoshop elements 11 won't read my canon T5 raw CR2 files.

    adobe photoshop elements 11 won't read my canon T5 raw CR2 files.
    why?
    need help!
    Solved!
    Go to Solution.

    Hi Zach.
    Sorry to say but Elements 12 came out several months before your camera. Adobe stops updating camera raw files for old software editions so that people have to buy new versions of the software when they get a new camera. It happened to me with LR3 when I got a new camera.
    There are works rounds but they are a lot of extra steps and I think you would be converting the files to Some format other than RAW (tiff?) and which I am not sure will perform the same.
    I think you just need to get a newer version of Elements.
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

  • Epson and Canon printers not working with 10.7.5

    Anyone know if there is a fix for Epson and Canon printers for 10.7.5? Did Apple intentionally switch off printer drivers to force us to upgrade to Mountain Lion? I called Epson technical support and they mentioned it's a well-known issue and they said to "wait for an Apple update". I doubt that will fix the issue. My Canon printer stopped working for months already and there is still no fix.

    Hey there zoneinfinite!
    I have an article here that can help you find and manually install the most updated printer drivers for your specific printers:
    Printer and scanner software available for download
    http://support.apple.com/kb/ht3669
    We also have an article that will have some helpful tips for troubleshooting printer issues in OS X, and it can be found here:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Photoshop Elements Organizer 9 will not read in Canon 70D raw files. All updates have been made.

    Photoshop Elements Organizer 9 will not read in Canon 70D raw files. All updates have been made.

    The Canon EOS 70D was first supported in Camera Raw 8.2 (the plugin used by Photoshop Elements to read Raw files)
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Camera Raw 8.2 is only compatible with Elements 12 and later. It is not compatible with Elements 11 or earlier.
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Your choices:
    Upgrade to Elements 12 to open 70D Raw files in Elements
    Download the free Adobe DNG converter, convert all 70D Raw files to DNGs then open and edit the DNG files in Elements 9
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • How to make Canon printers work with Snow Leopard

    Can anyone explain simple language (I'm not technical which is why I chose Apple) how I can get my Canon MP 980 printer/scanner to work with Snow Leopard.
    Everything used to work perfectly and I'm beginning to regret the upgrade to Snow Leopard (what other suprises are waiting for me when I'm in a hurry?).
    I have other Canon printers in various locations (MP 600, MP 530 and iP90). Will I have similar problems with all of them and, if so, is there a simple way to resolve the issues across the board?
    I checked the Canon web-site but was totally confused
    Any help truly appreciated.

    According to Apples website; they should work. Please see: http://support.apple.com/kb/HT3669#canon
    The driver version should be: 10.26.1.0 (or greater)
    The above article was modified in December 15th 2009
    If after installing the most-up-to-date driver, via the link provided, the issue persists, reset the printing system.
    How-to reset the printing system:
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/14001.html
    Then install the printing driver supplied by Canon on Apples website here:
    http://support.apple.com/downloads/CanonPrinter_Drivers_for_Mac_OS_X_v106
    If that still does not work, reset the printing system again. Now go to Canon's website and get the driver(s) for mac there.
    Canon's website for driver download for the PIXMA MP980:
    http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=334&modelid=17357
    There is the possibility the drivers on canon's website could be newer than apples. The version numbers, size of file to download, and release date all appear to be quite different.
    On *apples website*, the driver info stats:
    * Version: 2.2
    * Post Date: November 16, 2009
    * Download ID: DL899
    * File Size: 274.59MB
    On *canon's website*, the various driver info stats:
    File Name and Description Version File Size Date Posted
    ICA Driver Ver. 1.3.0m (Mac OS X 10.6)
    icaosx130m.dmg
    1.3.0m
    5.37 MB
    01/05/2010
    MP980 series CUPS Printer Driver Ver. 10.26.2.0 (Mac OS X 10.5/10.6)
    mp980sosxcp102620ea8-2.dmg
    10.26.2.0
    10.11 MB
    12/25/2009
    MP980 series Scanner Driver Ver. 14.8.2 (Mac OS X 10.3/10.4/10.5/10.6)
    mp980sosxsd1482ea8-2.dmg
    14.8.2
    23.86 MB
    09/01/2009
    MP980 series MP Driver Ver.1.0 for Network (Mac OS X 10.6)
    mp980sosxns10ea7-3.dmg
    1.0
    39.56 MB
    11/05/2009
    MP980 series Printer Driver Ver. 7.13.1 (Mac OS X 10.3/10.4/10.5)
    mp980sosxpd7131ea8-2.dmg
    7.13.1
    7.34 MB
    06/15/2009
    +I do not own the same printer+, however I would suggest installing some of or all of the following 3 drivers.
    If your printing via USB:
    MP980 series CUPS Printer Driver Ver. 10.26.2.0 (Mac OS X 10.5/10.6)
    If your printing via a Networked Printer:
    MP980 series MP Driver Ver.1.0 for Network (Mac OS X 10.6)
    If your going to use the scanner:
    MP980 series Scanner Driver Ver. 14.8.2 (Mac OS X 10.3/10.4/10.5/10.6)
    If you scroll down further, past the 'drivers', that same website from Canon also includes step-by-step guides/manuals for setting up the printer/scanner, both via USB & WiFi.
    If the steps above did not resolve the issue, please respond back.
    Good Luck!
    *The website for the Pixma MP600 (sorry no MP600R listed) is here:
    http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=238&mo delid=13800#DownloadDetailAct
    Message was edited by: MacLovin54321

  • Where can I obtain Canon Printer drivers for Maverick 10.9.2...since I have moved to Mavericks none of my printers work.   I have the following Canon Printers, Selphy CP720, Canon Pixma IP6600 and Canon Pro9500 Mark II

    Where can I obtain Canon Printer drivers for Maverick 10.9.2...since I have moved to Mavericks none of my printers work.   I have the following Canon Printers, Selphy CP720, Canon Pixma IP6600 and Canon Pro9500 Mark II?

    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US
    Canon drivers for Mavericks:
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp160#DriversAndSoftware

  • Q about compatibility between Canon printers and OS X

    I am planing on buying a canon printer, MP600R, which states under sys requirements that OSX is supported. I happened to call to one of those on-line warehouses and spoke to the Mac department where the sales guy said that they don't recommend Canon printers for Mac or that Canon doesn't support Mac.
    Even though I mentioned that on the Canon site they state that Mac is supported (for this model) he sounded very doubtful. Is this a load of cr@p?
    The company sells Canon printers, but probably mainly to PC users, so it's not that he wanted to sell his own brand.
    Any opinions out there? Because I'd like to give Canon a go after not being happy with my previous Epson home printer.
    Thanks.

    Hello Petter,
    Just to let you know that I print to an MP600R in the office (mainly to print on DVD's) from my MacBook Pro and it works fine. It is connected to the network and those of us with Mac's (both PPC and Intel) have no trouble.
    FYI - The R indicates that it is a network capable model. As Greg said, get a USB only model and you will have some trouble if you are planning on connecting it to a network, especially one where you are sharing the printer from a Windows box.
    Regards,
    Paul

Maybe you are looking for