Reader 9.3.2, uncodumented SchemePerms value for javascript of "4"?

I tried to find the download for 9.5.5, but my OS is not in the list. I'm on a non-intel PPC mac. I tried finding that version on the web, but most of the links lead me back to Adobe, where it doesn't seem to want to be found. It obviously exists somewhere, but Adobe isn't making it easy to access!

Similar Messages

Read Internal Table based on Multiple Values for Key Field

Hi Gurus,
i have one query can you tell me how read an internal table it_kna1 for multiple values of land1 DE US IND etc.
i had tried as below but i could not can you try and let me knwo at the earliest.
here i want read the values with DE or US and want further prosess them.
REPORT YC001.
tables kna1.
select-options: cust for kna1-kunnr.
data: begin of it_kna1 occurs 0,
        kunnr like kna1-kunnr,
        name1 like kna1-name1,
        land1 like kna1-land1,
        end of it_kna1.
select kunnr name1 land1 into table it_kna1 from kna1 where kunnr in cust.
read table it_kna1 with key land1 = ( 'DE' OR 'US' ) .
can anybody suggest me some solution.
Thanks,
Jeevi.

This should be what you need:
REPORT ztest NO STANDARD PAGE HEADING LINE-SIZE 80 MESSAGE-ID 00.
TABLES kna1.
SELECT-OPTIONS: cust FOR kna1-kunnr.
DATA: BEGIN OF it_kna1 OCCURS 0,
        kunnr LIKE kna1-kunnr,
        name1 LIKE kna1-name1,
        land1 LIKE kna1-land1,
      END OF it_kna1.
DATA: itab_index LIKE sy-tabix.
SELECT kunnr name1 land1
INTO TABLE it_kna1
FROM kna1
WHERE kunnr IN cust.
SORT it_kna1 BY land1.
READ TABLE it_kna1 WITH KEY
land1 = 'DE'
BINARY SEARCH.
itab_index = sy-tabix.
WHILE sy-subrc = 0.
itab_index = itab_index + 1.
WRITE: /001 it_kna1-kunnr, it_kna1-land1, it_kna1-name1.
READ TABLE it_kna1 INDEX itab_index.
IF it_kna1-land1 <> 'DE'.
    sy-subrc = 99.
ENDIF.
ENDWHILE.
SKIP 1.
READ TABLE it_kna1 WITH KEY
land1 = 'US'
BINARY SEARCH.
itab_index = sy-tabix.
WHILE sy-subrc = 0.
itab_index = itab_index + 1.
WRITE: /001 it_kna1-kunnr, it_kna1-land1, it_kna1-name1.
READ TABLE it_kna1 INDEX itab_index.
IF it_kna1-land1 <> 'US'.
    sy-subrc = 99.
ENDIF.
ENDWHILE.
Rob

Error while reading UcdContext [trying to read / set application values for users]

Hi,
I am trying to write a program to store user selected values on NW7.3 Portal using "User Content Directory". I can see and read some code snippets on how to set and read the context but I am getting one error after another.
The error message I am getting is
"com.sapportals.portal.pcd.gl.PcdGlContext:service:[email protected]entClassLoader@84507ed@alive incompatible with interface com.sapportals.portal.pcd.gl.IPcdContext:sap.com/[email protected]der@f46d103@alive ". Code snippet is as given below at the end of the message.
1) I tried different ways to have a lookup and always gave message as "look up not found" and for pcd:portal_content came up with above error.
2) Once I read the UCD context, I would like to store some values based on user selection and store them. User may change the values whenever they like and I will be using the values for other purposes in another application.
3) Has any one successful in setting and reading UCD Context in NW 7.3. Will it be possible to share such sample code as the code snippets at http://help.sap.com/saphelp_nw73ehp1/helpdata/en/4a/8e1bce28e24dd8abd9f4de05e5587d/content.htm are not much of use unless I am able to read the UCD.
Thanks for your help!
Regards,
Raju
TestingUCD is my test application and the following is code snippet
InitialContext initialContext = null;
IPcdContext pcdCtx;
Hashtable env = new Hashtable();
env.put(UCD_INITIAL_CONTEXT_FACTORY, UCD_INITIAL_CONTEXT_FACTORY);
env.put(Context.SECURITY_PRINCIPAL, request.getUser());
env.put(Constants.REQUESTED_ASPECT, IPcdAttribute.PERSISTENCY_ASPECT);
try{
initialContext = new InitialContext(env);
//response.write("Before pcdCtx lookup");
try {
pcdCtx = (com.sapportals.portal.pcd.gl.PcdGlContext) initialContext.lookup("pcd:portal_content");
} catch(Exception e){
response.write("Some problem with lookup" + e.getMessage());

Hi,
There are quite few differences in the standard code snippet given by SAP Help on UCD and the once that you put above in the question.
Below is standard snippet.
Hashtable<Object, Object> env = new Hashtable<Object, Object>();
env.put(Context.INITIAL_CONTEXT_FACTORY,
IPcdContext.UCD_INITIAL_CONTEXT_FACTORY);
env.put(Context.SECURITY_PRINCIPAL, user);
InitialContext ctx = new InitialContext(env);
pcdCtx = (IPcdContext) ctx.lookup("");
============================
Check the ones highlighted in BOLD and compare them in your code. In your code when ur doing initial lookup you are not using the Correct class type cast for the returned lookup object!
Your code shows as below:
pcdCtx = (com.sapportals.portal.pcd.gl.PcdGlContext) initialContext.lookup("pcd:portal_content");
But may be it shd have been something like below:
pcdCtx = (IPcdContext) initialContext.lookup("pcd:portal_content");
Pls verify and hopefully this resolves your issues around look up.
Thanks,
Swapna Priya.

Default value for Read-Only Picklist Field

Hi, all--
I would like to have a default value ("Undetermined") for the "Associated Account" read-only picklist value. I have an account record of this value for this purpose. This is because if there is no value in the field, the record will not be included in a report that includes the field. I do not want to make the field required at this point.
Field management doesn't appear to allow any default value for read-only picklists. Does anyone know how to get around this, either at the lead record stage or at the lead report stage (without resorting to an analytic, which won't work for what we are doing)?
Thanks.

That's a great question. It doesn't appear as though you can select it from the typical method of Admin | Application Customization | Lead | Lead Field Setup | Associated Account.
Have you tried creating a workflow to populate the field using Before Modified Record Saved?

Can not read values for profile option proxy_user_id in routine& Routine

Hi all ,
I developed a new form in oracle apps R12 and deployed in respective top ,After entering all the details when i am going to save the data i am getting the message like
Can not read values for profile option proxy_user_id in routine& Routine and no action is taking place .
Can some one please help me how to avoid this issue.
Thanks in advance,
Srinivas

Hi Srinivas,
Please check below Metalink notes. Although it is not same as your issue but it will give you way to enable 'VISIBLE' flag(if not done already)
_'Cannot Read Value For Profile Option Proxy_user_id' Error While Trying To Create an AR Invoice [ID 1280915.1_
Thanks,
JD

Read color values for swatches in InDesign CS5, js

Hi,
I need to read color values for swatches. I got this in OMV and was hoping it would give me an array of the color values for all existing swatches, but I am only getting "Object color":
mySwatches = myDoc.swatches[1].getElements();
alert (mySwatches)
Thank you for your help.
Yulia

Hi Yulia,
Try this:
var
    mD = app.activeDocument, // document
    mS = mD.swatches, // document swatches
    gS = 4, // swatch index
    mC = [mS[gS].name, mS[gS].colorValue, mS[gS].space]; // swatch properties
alert(mC.join("\r"));
Hope that helps.
Marijan (tomaxxi)
http://tomaxxi.com

Input Ready Query, Variable read mode setting Only Values for InfoProvider

Hi,
I have a problem with Selection Variable for a BEx Query :
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query built for an "aggregation level" based on "real time infocube" (Planning);
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
- Characteristic (info-object) has set the property: Business Explorer tab--> Query Def. Filter Value Selection as Only Values in the info-provider...
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
If I build a query for the Real Time Cube it works correctly, but if the query is built for the aggregation level it doesn't work!
Could someone explain me why it doesn't work correctly?
Thanks in advanced
Fede

Thanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse

Variable "read mode setting" Only Values for InfoProvider

Hi,
I have a problem with Selection Variable for a BEx Query:
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query;
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
Could someone explain me why it doesn't work correctly?
Thank in advanced
Fede

Thanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse

What the Initial value for sy-tabix & sy-index

Hi Folks
I have a small doubt.
What the Initial value for sy-tabix & sy-index?
Can anyone please clarify me?
Regards,
Sree

hi sree,
both values are initialized to 0 before processing and after processing values are changed according to used scenarios.
if helpful reward some points.
with regards,
suresh babu aluri.

Error that "specify a value for variable posting period (single value entry

hi
My query is running testing fine in RSECADMIN under some username..but when i try and open it using analyzer (under same username) it gives me error that "specify a value for variable posting period (single value entry, mandatry)" it does'nt even asks to enter variable values and gives this error message.
However the same query appears to be working fine under different username.
plz advise.

Hi Abhinav,
Just do one thing compare the Roles of two different users for which Query is getting executed and not.
Check the Object S_RFC.
Compare the Objects detail for Both the Users.
Please Assign points if useful.
Regards,
Rajdeep.

Sy-ucomm value for print preview

Hi friends,
Can any one tell me the sy-ucomm value for the print preview..?

Hi,
If you are asking the function code of Pop-up you get while printing ..then answer is no..even if you get the fcode you cannot handle it in your program.
What exactly you are looking for ?

Error: Missing initial value for session parameter

Hi,
I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR: Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
Please anyone give me an idea what is causing the problem.
Thanks,

in DAC > Run History > Task Details, query
Name = SDE_ORA_Product_Category_Temporary
Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
-lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing.

Incorrect initial value for characteristic 0fiscyear in i_t_range

Hi,
While extracting the data from the source DSO to Target I got an error message like '' Incorrect initial value for characteristic 0fiscyear in i_t_range".
what is the step should i take to resolve this?
Thanks in Advance.

Gurus
I have the same problem with my ABAP code written in DTP filter.
Can anyone please help what needs to be done , I am getting this error when I try to load the data to cube.

Initial value for a dropdown box

Hello all,
I have created a web template in the WAD (BI 70) with a dropdown box on a characteristic. A chart is displayed based on the query result. My query is built on an infoset.
My problem is to populate the filter with an initial value and still let users change the characteristic value in the dropdown (all values for the characteristic is not acceptable in the context) . Also, I don't want the variable screen to show up.
What is the best approach to achieve this?
Thanks,
JL

In Query Designer you put in your default value in the area to the right in the first pane..
If you put it on the left hand side, the filter will not be changeable.
Hope this helps.
Can give more presise answer if you need it.

What is the initial value for a numeric field ??

Can someone tell me what the INITIAL VALUE FOR A NUMERIC FIELD is ?? Thank you
Rod.

Using the following...
   class MyClass
     int myvar1; // Default initial value
     int myvar2 = 3; // Default initial value and default value
     MyOtherClass myclass1; // Default initial value
     void doit()
       int mylocal1; // No value
       MyOtherClass myclass2; // No value
All number member variables, like myvar1 start off with andefault initial value which is zero. For booleans this is false. Object reference variables, like myclass1, have a null value.
All local numeric variables are considered undefined. So mylocal1 and myclass2 are undefined. Before you can use them you must explicitly provide a value.
Finally note that myvar2 will have two values during class instantiation. Initially it will have a value of zero. Sometime later it will have the value of 3. (When that happens is very definitely outside the scope of what this forum covers. If you want to know then ask in the advanced forum.)

Reader 9.3.2, uncodumented SchemePerms value for javascript of "4"?

Similar Messages

Maybe you are looking for