Reader 9.4.0 on Win7 x64 won't print to network printer

I have Adobe Reader 9.4.0 installed on Windows 7 x64 and I am trying to print to a network printer attached to a Windows 2008 x64 server. The printer is a Kyocera CS-4035 and has the most recenter driver available installed.
When I open a PDF and attempt to print, I get the "you need to install a printer" error. This same error occurs when I change the default printer to any of the HP or Kyocera printers we have available. We have one Konica Minolta printer that appears to work when it is the default.
As I said previously, I have already verified that we have the most current driver installed on the print server. Any suggestions?

SOLVED: Instead of using the most current driver for the specific printer, I switched to using the manufacturer's more current universal driver, and this solved the issue.

Similar Messages

Premiere CS5 (win7 x64) won't recognize my Mini-DV camcorder.

I have Premiere Pro CS5 installed on a Windows 7 64-bit system.
When I try to Capture, I keep getting the error message: "Can't Activate Recorder. Try Resetting Camera."
the whole set-up worked fine on my XP system with Premiere Pro 1.5.
Extra info:
The Mini-DV camcorder is a Panasonic NV-DS33 (but personally I think it has nothing to do with my camera because I have seen so many threads online regarding this issue and no-one has any decent answer!)
the firewire cable is fine because it works on my old XP computer.
in premiere, if I change the camera to an HDV, then suddenly I can CONTROL the camera, but I can't capture)
Windows 7 (x64 bit) recognizes the Camcorder in the Device Manager (and says it is working properly).
I have tried several other DV capturing softwares (Stoik, Scenalyzer, WinDv). I have even tried my old Premiere Pro 1.5 on my 64-bit system.. and NONE OF IT WILL CAPTURE MY CAMCORDER!
This is very frustrating. I need my new win7 (x64) Premiere CS5 to capture successfully. I have spent a LOT of money on this new system. What on earth is the problem?
(i saw one thread on a similar issue regarding a 32-bit installation of Win 7, and it is marked as ANSWERED! but in my opinion, (from the amount of forums on many other sites) this issue is definitely not fixed.
is there any update to Premiere CS5? or a workaround? or anything else I should know?
PS: it is not an option for me to keep using my old computer to Capture video and then transfer it to my new system. i am passing my old system on to another person.
many thanks
Marc
[email protected]

I agree that the "Legacy" FW driver solution should be a stickie, or FAQ. Since Win7-64 was released, it has caused no end to the grief. Maybe Jeff, or Todd will have a better solution to getting the word out.
It was Harm Millaard, who brought that to MY attention, and he's posted it to many, many threads. In nearly every case, it's solved the issue.
Good luck, and thanks for reporting Colin's success,
Hunt
PS - per your suggestion, I just published this "fix" in the Tips & Tricks sub-forum for PrElements.

Mac Mini won't recognize Apple Network Printer

My Mac mini (1.42 GHz, 2005) suddently stopped recognizing my network printer. It's a printer run off of an Airport Express card, and works perfectly with my other two Macs on the system. I have deleted and reinstalled the driver on the mini, the rest of the network seems to work fine, but when you go to print to the printer, it goes to la-la land and then sets another printer as the default.
Any ideas?
Todd

I figured it out. Had to reset the router.

Acrobat Reader 3.02 vs. Win7 x64

Hi all,
I'd like to ask for help.
We have generated a lot of PDF files with automatic script. Problem is, that PDF files are openned correct only in Acrobat Reader 3.02, in newer version are not correct diplayed some slovak characters (I hope examples will be correct displayed below).
We plan to migrate to Windows 7 x64 next year, but AR 3.02 is not able to install on x64 system (installation finished with error).
I can copy directory with installed AR 3.02, it is working, but application sometimes crashed.
I don't have any idea, where the problem can be.(fonts? character coding?...)
Can anybody help me?
Thanks,
Lebedo
AR 3.02
dovoľujeme si Vás upozorniť, že spoločnosť eviduje voči Vám splatnú pohľadávku, ktorá vznikla
AR 9
dovo¾ujeme si Vás upozorni•, že spoloènos• eviduje voèi Vám splatnú poh¾adávku, ktorá vznikla

I don't know what is causing this problem with your language; I think contacting Adobe Support in your country or region may be the best way to a solution (they should know about display problems with your language); see http://www.adobe.com/eeurope/aboutadobe/contact.html

How to use acrobat reader with win7 x64?

I downloaded the acrobat reader, installed v 9.2 for x64 as recommended on adobe web site. After the install, all my icons had changed to adobe and when I tried to run any other program the system gave me an error and thought it was running adobe and looked for the Eula file. Does anyone have success story using reader with win7 home with 64 bit system. My computer is a new lenovo t400.

You start by going here and selecting the forum for your operating system
http://forums.adobe.com/community/adobe_reader_forums

T61 and Fingerprint Reader Problems Win7 x64

hi everyone!
trying to use win7 x64 on my thinkpad t61, I have gotten into trouble using the fingerprint reader software;
when trying to register my fingerprints I get this error: "E7210005 operation is not permitted according to system guidelines"
(translated from german)
Lenovo fingerprint reader software 5.9.3
logged in as user: Administrator
This problem does not appear when using Win7 with another user account.
thx!

Hi and welcome to the forum!
See this thread:- http://forum.lenovo.com/t5/ThinkVantage-Technologies/Finger-Print-Reader-Error-Code-E7210005/td-p/20...
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Reader X, Win7 x64 and Outlook 2010 x64

Just testing Adobe Reader X in Windows 7 Professional x64 using Microsoft Office 2010 x64.
When using the PDF Previewer in Outlook, Outlook just locks up. It says "Starting PDF Preview Handler..." but the moving orange stripes freeze and nothing happens until I kill the AcroRD32.exe process spawned from prevhost.exe.
Is there a workaround for this or is it at least a known bug?
Thanks

Announcement: Would you like to help us improve Adobe Reader?
Hi All,
We have had a few bug reports related to Adobe Reader X protected mode coming in from you in this forum. We have addressed a large number of them in our upcoming Reader update and we would like to hear your feedback.
To that extent, we would like to invite you to the Adobe Reader Prerelease program and try out the latest build. To participate, please fill in the form available at https://www.adobe.com/cfusion/mmform/index.cfm?name=reader_prerelease_ interest and indicate Adobe Reader as the product of your interest.
We look forward to your active participation, feedback and help towards making Reader a better product.
Thanks and regards,
Adobe Prerelease Team

Win7 x64 Installation on late 2007 MBP+Mountain Lion

Dear All,
As a long time mac and bootcamp user, I've never expected to face this problem but I've been trying to do this for 3 days.
I'm having trouble installing bootcamp (win7 x64 ultimate) into my late 2007 MBP (2.4GHZ core 2 duo)
Pretty much use the bootcamp assistant from start to finish, tried using install dvd and create boot-able USB stick (by changing the plist.info on the bootcamp assistant package, as my MBP isn't supported.)
With USB stick created by bootcamp assistant, my mbp just simply won't read it even during startup and rEFit startup.
Sometimes it goes into the blank state and says no bootable device.
With win7 install DVD, whenever I use built in superdrive, it got ejected after 2-3 mins,
When I tried using Samsung external dvd burner/player, in place of who-knows dead superdrive, it went into blank screen with only a dash blinking (just like when the first time you start a PC) then disc stop spinning after awhile.
Burned few copy DVDs from extracted ISO (from the orginial install disc) and came up with same results
Recent changes, current condition,etc:
- Changed the stock 160gb harddrive into WD500GB blue scorpio.
- Installed fresh OSX Mountain Lion downloaded from App Store (was Lion) and updated everything.
- Had the very same win7 on bootcamp 3 installed on snow leopard few years ago and keeping it even with Lion (the exact same dvd!)
- Superdrive cannot be used to write but can read normally (install DVD shows up normally in OSX environment.)
- With USB created by bootcamp assistant, rEFit shows "legacy booting" and can't find files inside the USB
- Installation is working flawlessly on my 2011 iMac.
- Can still boot into bootcamp on old internal stock hdd (using external case)
- DVDs burned are Verbatim DVD-R and Sony DVD-R, both are top brands.
- Burner I tried to burn them are 2011 iMac's, 2012 MBP's, Samsung external dvd burner (all fail to boot on my 2007 MBP)
- Tried the method to create usb stick on windows 7, still can't boot.
- Burned DVD using Nero and alcohol 120% on windows 7, still fail.
I wonder if you guys can help me, I'm a designer and I really need to install Corel Draw on bootcamp so I can work on some CDR files on my MBP. And other stuff such as office's finance control program that can only work under windows.
Thanks in advance!

Found a workaround, to sum it up, it's pretty much my dead internal superdrive (as for unbootable USB, that's still a mistery). What I did was moving the HDD to my 2012 MBP and install from there. The problem is now that since I installed it on another machine (with ofc all different hardwares) I got blue screen whenever I tried to start Windows7 (in 2007 MBP after moving the HDD back there).
Next step will be replacing the superdrive on 2007 MBP with 2012's. Or if someone got a suggestion like installing the drivers via target disk mode etc, please advice

Photoshop CS4 (64bit) & Win7 x64 problem fixed

I just wanted to post this to help anyone who might be having this problem.
Here's the problem. When you use Photoshop's lasso tool, you can press ALT at the same time, and it would turn into a magnetic lasso tool that you can use to make straight lines.
Well, what would happen is that I would be making a selection, and then suddenly the screen (both screens, as I'm using a dual screen setup) would flicker, and the selection would complete by itself, and I would be SOL, as, obviously, the selection is not what I wanted.
I could replicate this without fail. I'm halfway done with making a perfect selection, and bam!, this crap happens, and I have to start all over again. It happens ALL the time, no matter what Photoshop setting I used. Photoshop was completely updated, and all my device drivers (video card, mouse drivers, etc.) were all at their latest. So I started looking outside Photoshop, as I was thinking it might be another software problem.
After much trial and error, I narrowed it down to Task Manager. I had Task Manager running in my tray. If I closed Task Manager (not minimize, close), restarted Photoshop, and made my selection using the lasso tool, the issue would go away, but would come back randomly.
The fix? Run Photoshop CS4 in Vista compatibility mode. This solves the problem completely.
I know a lot of you will probably say that you have Photoshop CS4 running flawlessly on Win7 x64, but I have 3 computers, each with completely different configurations, one of them being a laptop, that I was able to replicate this on. Once I ran Photoshop in Vista compatibility mode on each computer, the problem was completely solved.
So I hope this helps anyone who has run into this problem.

I confirm he is a blond wanna be.
function(){return A.apply(null,[this].concat($A(arguments)))}
Hudechrome wrote:
It won't work for me. I never used Vista.
(I will neither confirm or deny I am a blonde!)
Thanks for sharing.

Win7 x64 can't install iTunes 10.5

Win7 x64 and havent updated the windows 7 service pack 1
I tried to find the Microsoft.VC80.CRT and uninstall the win32 version, but still iTunes won't allow me to install.

Hi
Every time I try to update iTunes it will not install. I have to uninstall everything from Apple - restart - reinstall etc. iTunes & Quicktime and MS Windows is just not good friends. The old storiy about Apple being so userfriendly and all - it´s crap. iTunes is so crappy - non-logical userinterface - why can´t you just take files and put into folders etc? I really dislike iTunes - and even more when it never want to be updated without all this uninstalling, reeboot, reinstalling. I use 2 hours on updating everytime.
So Apple - please look into mS Windows 7 64 bit compatibillty - there must be something wrong when so many people are having issues when trying to install updates from Apple.

Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO

I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??

Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued

PrE-10 Will not start in Win7(x64)

I sincerely hope this is not redundant, but I have spent days on this forum looking for answers, but with no luck. I have seen many similar questions, but none of the 'fixes' proposed are relevant, or do not work for me.
History:
I have been running PrE-10 since its release, on Win-7(32-bit). I recently had a system crash after installing Windows-8 Beta and had to wipe my hard drive and start from scratch. This time I loaded Win-7 (x64). All my original apps I had stored on an external drive. Some re-installed, some not. I had to re-download PSE-10, and PrE-10 as 64-bit apps.
PSE-10 and the associated Organizer, work fine as before. PrE-10 however does not start. I get the splash screen, with the options of NEW, OPEN and Organizer. Of these, only Organizer opens. The other two options either bring up a Windows Error box 'Pre-10 has failed to start', or it just sits and does nothing.
It is not a system limitation as I have far more than the requirements needed to run it and as I said, it worked fine in the 32-bit version, and nothing else has changed (that I have input), so I am baffled.
As I said, I have done many of the proposed fixes I have seen on the forum, if they are pertinent to my system, and even some that were not. I have now completed the reinstallation of most of my applications, and so far only PrE is causing a problem, but it is very important to me as I am working on a project that requires it.
I have done a Belarc report, but I do not see a link to upload it. I see links for images, videos, tables and weblinks, but nothing for files (pdf). I will attempt to load it as an image and see if this works. I do not want to post it as text or HTML as it is 7 pages long! (Nope, it does not insert). Perhaps someone can tell me how to upload the file.
Here is a system summary:
OS Name
Microsoft Windows 7 Ultimate
Version
6.1.7601- Service Pack 1 Build 7601
Other OS Description
64-bit
OS Manufacturer
Microsoft Corporation
System Name
DOUG-IQ775
System Manufacturer
HPQOEM
System Model
SLIC-CPC (TouchSMart IQ-775)
System Type
x64-based PC
Processor
AMD Turion(tm) 64 X2 Mobile Technology TL-58, 1900 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date
American Megatrends Inc. 5.15, 11/26/2007
SMBIOS Version
2.4
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume1
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
User Name
DOUG-IQ775\DOUG
Time Zone
US Mountain Standard Time (AZ)
Installed Physical Memory (RAM)
   4.00 GB
Total Physical Memory
   4.00 GB
Current Available Physical Memory 1.68 GB
Total Virtual Memory
           8.00 GB
Available Virtual Memory
           5.32 GB
Page File Space
           4.00 GB
Page File
C:\pagefile.sys
STORAGE
USB Flash Memory, s/n 001D0F1FCF2DC8C08406020B, rev 1.00
Generic Flash Disk -- drive 8, 8GB s/n 03483DBB, rev 8.07
WDC WD16 00BEVS-60RST0 -- drive 7, 160GB s/n WDC WD1600 WD-WXC108351497
Generic CF Reader -- drive 5, s/n 058F12M111B, rev 1.01
Generic SM/SD/MS Reader -- drive 6, s/n 058F12M111B, rev 1.00
Century EX35SW4_SB4-A USB Device -- drive 1, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-B USB Device -- drive 2, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-C USB Device -- drive 3, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-D USB Device -- drive 4, s/n 011E011D3B, rev 0100
HARD DRIVES
c:/D:(NTFS on drive 0) *
500.11 GB
k: (NTFS on drive 7)
160.03 GB
w: (NTFS on drive 1)
250.06 GB
x: (NTFS on drive 2)
250.06 GB
y: (NTFS on drive 3)
250.06 GB
z: (NTFS on drive 4)
250.06 GB
WDC WD16 00BEVS-60RST0 USB Device [Hard drive K:] (160.04 GB) -- drive 7, SMART Status: Healthy
WDC WD50 00AAKS-65TMA SCSI Disk Device (500.10 GB) -- drive 0, s/n WD-WCAPW3069745, SMART Status: Healthy
Drives new – drive encryption
Memory Modules c,d
1660.37 Gigabytes Usable Hard Drive Capacity
914.49 Gigabytes Hard Drive Free Space
CD/DVD
TSSTcorp DVDR/RW TS-T632L ATA Device [Optical drive]
Software Versions & Usage
     i Adobe Download Assistant
     i Adobe Help
     i Adobe Photoshop Elements Editor Version 10.0
   ı i Adobe Photoshop Elements Version 10.0
   ı i Adobe Premiere Elements Version 10, 0, 0, 0
     i Adobe Systems Incorporated - Elements Organizer Version 10.0
   ı i Adobe Systems Incorporated - ElementsAutoAnalyzer Version 10, 0, 0, 0
       Adobe Reader and Acrobat Manager Version 1.5.7.0
    i Adobe Reader Version 10.1.3.23
     i Adobe Systems, Inc. - Shockwave Flash Version 11,3,300,270
   ı i Adobe Updater Startup Utility Version 2.2.0.2 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)
   ı i Adobe® Flash® Player Update Service Version 11,3,300,270
     i Amazon MP3 Downloader Version 1.0.0.0
     i Any Audio Converter Application Version 3, 3, 8, 1
     i Any DVD Converter Application Version 4, 0, 1, 1
   ı i Apple Inc. - QuickTime QuickTime 7.7.2 (1680.56)
   ı i Apple Push
     i Apple Software Update Version 2.1.3
   ı i Belarc, Inc. - Advisor Version 8.2g
     i Canon IJ Driver Uninstaller Version 1.2
     i Canon IJ Utility Uninstaller Version 1, 3, 0, 0
   ı i CANON INC. - CNSLMAIN.EXE Version 1, 4, 3, 0
     i CANON INC. - MP Navigator EX Version 1, 0, 7, 0
     i CyberLink - CLDownloader Version 2.3.0.2715
     i CyberLink - DZM Version 2.05.3206
   ı i CyberLink Corp. - PowerDirector Version 9.0.0.2930
   ı i Google Chrome Version 21.0.1180.75
   ı i Google Update Version 1.3.21.103
   ı i GSpot Codec Information Appliance Version 2, 7, 0, 1
   ı i Igor Pavlov - 7-Zip Version 9.20
   ı i INR Desk Version 2.0.0.0
   ı i Microsoft Corporation - Internet Explorer Version 9.00.8112.16421
   ı i Microsoft Corporation - Windows Installer - Unicode Version 5.0.7600.16385
        Microsoft Corporation - Windows® Search Version 7.00.7600.16385
   ı i Microsoft Malware Protection Version 4.0.1526.0
     i Microsoft Network Inspection System Version 4.0.1526.0
   ı i Microsoft Security Client Version 4.0.1526.0
     i Microsoft ® Windows Script Host Version 5.8.7600.16385
   ı i Microsoft® .NET Framework Version 2.0.50727.4927
     i Microsoft® .NET Framework Version 3.0.6920.5011
     i Microsoft® .NET Framework Version 4.0.31106.0
   ı i Microsoft® CoReXT Version 7.250.4232.0
   ı i Microsoft® Windows® Operating System Version 12.0.7600.16385
     i OpenOffice.org 3.4 Version 3.04.9590
     i OpenOffice.org Base Version 3.04.9590
     i OpenOffice.org Calc Version 3.04.9590
     i OpenOffice.org Draw Version 3.04.9590
   ı i OpenOffice.org Impress Version 3.04.9590
     i OpenOffice.org Math Version 3.04.9590
     i OpenOffice.org Writer Version 3.04.9590
     i OpenOffice.org Writer(Web) Version 3.04.9590
   ı i Orbitdownloader.com - Orbit Downloader Version 4, 1, 1, 1
     i PlotSoft L.L.C. - PDFill PDF Editor with FREE PDF Writer and PDF Tools Version 9.0.0.9
     i PlotSoft LLC - PDFill FREE PDF and Image Writer Version 9.0.0.9
   ı i Realtek - ReStart Application Version 500, 1001, 719, 2007
   ı i Realtek - RtlService Application Version 700, 1004, 1207, 2009
   ı i RichVideo Module Version 2.0.1.5417
     i Safer Networking Limited - Secure Shredder Version 1.9.0.0
     i Safer Networking Limited - Spybot - Search & Destroy Version 1, 5, 2, 0
     i Safer Networking Limited - Spybot - Search & Destroy Version 1, 6, 0, 30
     i Safer Networking Limited - SpyBot-S&D Version 1, 6, 2, 0
   ı i Safer Networking Ltd. - Spybot - Search & Destroy Version 1, 6, 0, 0
     i SmartSound Sonicfire Pro Version 5.7.1
     i Sun Microsystems, Inc. - Java(TM) Platform SE 6 Version 6.0.0.105
     i The Audacity Team - Audacity® Version 1,3,13,0
Can anyone help me get this app going... please!!
Thanks in advance!
DN

This is frustrating! I just answered this post at length, but when I posted it it disappered!
Guess I have to start over and hope for the best!
Is that an HP laptop?
No, it is a desktop. However it is an HP 'hybrid' all-in-one, and uses a lot of laptop hardware and software to keep the low profile case.
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
I read this and it does not apply to my system.
Otherwise, unless I missed it, I do not see mention of your graphics/video card brand/model and driver number
This is why I asked how to upload the Belarc report! Too much info to post. Here is the Graphics info.
Name
NVIDIA GeForce Go 7600
PNP Device ID
PCI\VEN_10DE&DEV_0398&SUBSYS_2A40103C&REV_A1\4&1BC86A40&0&0020
Adapter Type
GeForce Go 7600, NVIDIA compatible
Adapter Description
NVIDIA GeForce Go 7600
Adapter RAM
256.00 MB (268,435,456 bytes)
Installed Drivers
nvd3dum,nvd3dumx.dll
Driver Version
7.15.10.9804
INF File
oem12.inf (nv_NV3x section)
Color Planes
Not Available
Color Table Entries
4294967296
Resolution
1440 x 900 x 59 hertz
Bits/Pixel
32
Display
Nvidia Flat Screen [Monitor] 19.25" vis
Driver
c:\windows\system32\drivers\nvlddmkm.sys (7.15.10.9804, 5.73 MB (6,006,696 bytes), 1/25/2007 6:43 PM)
Check the ATI or nVidia or ??? website to be sure you have a current driver
Another interesting story, that! Nvidia/GeForce does an auto detect and correctly identifies the graphics card, and sends me to a link to upgrade the driver. The driver page says it is for Vista x64 and Win7 x64 (even its long name has 'win7-x64' in it). I download and attempt an install, and it comes back with "you are running Windows 7 64-bit. This driver is for Vista only. Installer closing." I went back and tried 4 other Win-7 x64 drivers, all reported the same thing, even though they state on the site they are for Win7 x-64. I then went to the Device Manager and tried to update the driver, but it reported using 'the most current driver available'. So I uninstalled the current Nvidia driver, which put me into VGA mode. I then went to Windows Update and did a search for updates. It found a missing Nvidia driver and called it 'Nvidia Driver for Win7 x64'. I downoaded and installed it and my system returned to normal 1440 x 900 display. I checked the driver info and it is the same driver as the original, including the release date, so apparently the original driver was in fact x64 compatible, and there does not appear to be an updated driver for it.
Also, for laptops... if that is what you have
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modul es.html
-http://forums.adobe.com/thread/1001579
It is not a laptop, but as it uses many laptop softwares and hardware, I will check these and see if they help. I will post the results.
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
There are no DISPLAY options in my BIOS setup. There is also no update available for the BIOS from HP
Thanks for the help.
DN

WIN7 x64 Home Basic, 0x80070013 when trying to write or delete files. Disk is write protected.

Hi,
My SD card reader is not able to write or delete and format sd cards.
WIN7 x64 Home Basic, 0x80070013 when I trying to write or delete files. When I trying to format I can see a message that disk is write protected.
The card is not locked, it's work in Lenovo Idea Pad s10 without any problem, It's also work in my Pentax camera.
I'm almost sure that the problem is software, but can't find solution.
Could Any one help me please?
Laptop is new, 8 days in use.

I have network shutdown 2.0.1 installed and the pcns process normally would be abend in 1 or 2 minute's time. What could be the problem ? Consider to upgrade the network shutdown to 2.2.1 version. Could the problem be resolved in new version ? Any precaution needs to be taken when installing the new version ?
Terence.

Adobe programs don't work on Win7 x64 with IE8 x32

I have been working for the last 2 hours trying to get adobe flash 10.1 downloaded and installed on Win7 x64 and IE8 x32. It downloads and crashes and never finishes the install, even though sometimes the adobe site tells me it's installed. when I access a website it asks to download the flash player each and every time.
Mind you I don't have a lot of time to troubleshoot and fix adobe issues. I have clients to take care of and if your not going to make your product easier to use then I will block all adobe flash sites from my clients computers. Needless to say this will make them angry at me but let me tell you I don't forgive. I will bash you each and every time a client calls me.

I don't understand - in your post you mention "new Flash Player" several times, but in the subject you mention 10.2...?
What is the exact FP version you have?
For your blue box problem, have you tried to disable Hardware Acceleration?

IPhone name not recognized by Win7 x64

Hi,
I have 2 iPhone 4, both are using one Apple universal docker to connect to PC, phone has its own name, and diaplay properly on PC wherever the device name is used, ie, under My Computer, Portable Devices. iPhone 4 are shown as A's iPhone or B's iPhone, as Digital Camera.
I encountered this issue after installed iTunes 10.5 or upgraded to iOS 5, I am not sure which one caused the problem. The issue is, B phone is no longer recognized as B by Win7 x64, while A phone has no problem at all, both are with iOS 5.
When I put B phone to docker or even connect to PC directly, it is always recognized as A, the device name is always A's name, but the content (camera photo etc) is still B's content.
When using iTunes, phone's name displays correctly.
I connected B phone to another USB port which is never used by iPhone before, Win7 detected and tried to download/install and finally, B phone is shown as Apple Portable Device, no Phone Name, not as Digital Camera as before. Again in iTunes, both phones are shown correctly with their own name.
Not a big issue but a little bit confused, how to correct device name here?
Thanks

Type "iphone not recognized by itunes" in the search box at the top of this page.

Reader 9.4.0 on Win7 x64 won't print to network printer

Similar Messages

Maybe you are looking for