Reader for tablet

Can't move books from reader for PC to tablet. The reader for PC doesn't show tablet when connected by usb as my sony reader does.
Tom

Hello Tom,
Thank you for your post.
To be able to read your purchased books on the tablet, first you must set up and register the reader app to your bookstore account.
A walk through on how to do this can be found here
http://www.kb.sony.com/selfservice/micr ... 0406846531
Once you have registered your tablet at the Sony Bookstore to transfer any book you have previously purchased, open the reader App, then tap the Store tab along the top right and it will prompt you to open your WWW browser, once opened follow these instructions to download your previously purchased books.
http://www.kb.sony.com/selfservice/docu ... d=C1001259

Similar Messages

  • Adobe reader for tablet

    hi every one,
    Does Adobe pdf reader for tablet or mobile has the read out loud feature,
    if yes how does it work?

    If you save it to a google drive it will only let the document be a "read only" file unless it is saved to the device also.

  • Adobe Reader on Tablet

    Hi. Help appreciated please. I have two Fusion 5 tablets - One 7 inch and one 9 inch. I have downloaded Adobe X1 Reader for tablets from the Adobe website for both. The 7 inch installed perfectly and pdf files I had downloaded were instantly readable. The 9 inch says it has downloaded and installed the Adobe Reader programme but when I try to open a pdf file an error message simply says 'cannot open file' and a secondary message says there is no programme installed which is associated with the pdf file.  However if I try to download Adobe Reader again it fails to do so saying Adobe Reader is already installed and compatible with the tablet in question.  The programme icon does not appear anywhere on the second tablet in programmes or app downloads so I cannot find it to delete it and attempt a reinstall.
    Both tablets were bought on the same day from the same manufacturer and apart from the screen size are identical. Why do I have this issue please when the same procedure was used to download Adobe Reader and yet one works and one does not? The pdf files I am trying to open are identical on both tablets from the same source and are not password protected.  Many thanks in advance.

    Hi
    Fusion5 is a make of tablet here in the UK. Manufacturers website is www.fusion5tablets.co.uk if this helps. OS is Android ICS 4.0.3. Thanks.

  • I have a new version of adobe reader for android on my tablet now i cannot delete files

    I have a new version of adobe reader for android on my tablet. Now there is no delete tab to get rid of old files

    Sorry, I was asking about the version of your Android operating system.  But if your PDF documents are not stored on an SD card, it does not matter which Android version you have.
    To permanently delete a PDF document from your Android device using Adobe Reader,
    In the Reader home screen, tap Documents in the left pane.
    Long press (press & hold) the PDF document that you want to delete.
    Tap the trash can icon in the top toolbar.
    Please note that there is no Undo for the Delete operation.
    If you have many files that you want to delete, it would be easier to download and install a File Manager app and delete files at once.

  • Can not open pdfs w/adobe reader for android on archos 10i tablet?

    I can not open pdfs w/adobe reader for android on archos 10i tablet? How to fix it?

    Hi Dennis, thank you for the reply. I have Adobe Reader installed and open. When I click on the pdf documents an error message box opens and says "Error. The document cannot be opened beacause it is not a valid pdf document". Perhaps the pdf's on the USB memory stick are corrupted. I can't open them on the laptop either. I'll reload them and try again.

  • Olive Mobile Viewer for tablet gives error message when downloading n Chicago Tribune for offline reading.

    When attempting to download the Chicago Tribune for offline reading using the olive mobile viewer for tablets, I get the message "An error occurred while downloading pleas try again.

    We don't support the "Olive Mobile Viewer" this is an application used by the Tribune to display their site. The Tribune help can be found at
    https://members.chicagotribune.com/help/
    "Feel free to call us at 1-800-TRIBUNE (1-800-874-2863), or email Bill Adee, VP/Digital Development & Operations (billadee at tribune.com).
    You can also get help via our Twitter or Facebook pages."

  • Suggestions for Adobe Reader for my tablet

    I'm not sure if there's a better place to post this, so . . . in using Adobe Reader on my Nexus 7 tablet, I have a few suggestions for features:
    It would be great if you could include a search function as you find on Adobe Reader for PC and (I assume) Apple. Not sure why this is not included in the tablet version.
    When I open Adobe Reader on my tablet, it always defaults to the Recent Documents list. I would like it, if in the settings, you could have it default to open in the folder view; as it is, I have to go thru a few steps to get here which is a pain.
    Regards, David

    Also, it would help a lot to have a "fit to width" display option, as on the PC version.  This would mean somewhat larger text (good) and a better fit to the 5:8 aspect ratio of most android devices.

  • Adobe Reader for Windows 8 tablets.

    Is there a version of Adobe Reader for Windows 8 tablets that supports rotation from landscape to portrait?

    The "normal" free Reader does not have this feature,

  • Adobe reader for windows 8 rt tablets

    I have samsung windows rt tablet,bSamsung Ativ Tab 32 GB. Is there Adobe reader version for that?

    Yes.  Adobe Reader for Windows 8 Tablets supports both Windows 8 and Windows RT. You can download it from the Windows Store.  Bring up the Search charm, select Store, and type "Adobe Reader" to find it.

  • LV7.1 Strange behavior with Automatic Error Handling occuring when it shouldn't [LV 7.1 Pro on WinXP for Tablet PC's]

    [LV 7.1 Pro on WinXP for Tablet PC's]
    I recently let a rather large LV app of mine run in the development environment while I was out for a couple of days. Upon returning I found that the app had hung for ~22 hours waiting for an answer to an Automatic Error Handling (AEH) dialog proclaiming an Error 7 in New File without any indication of the VI hierarchy that called New File.  I set about ensuring that AEH dialogs would not pop up and have not been able to discover how I could have possibly received one in the first place.
    Subsequent investigation revealed:
    Neither AEH option in Options>Block Diagrams were checked.
    Network problems had occurred around the time that the app had hung.  All file paths are network paths when running in the development environment, so the cause of the error was most likely valid, even if the AEH dialog appearance wasn't.
    My app has only one instance where the New File primitive is used by me. That subVI and all others above it in the hierarchy DO NOT have the AEH property enabled.  The error out cluster of New File in my subvi is wired.
    My app has three instances where New File is called from a vi.lib vi (Open/Create/Replace File.vi, Open Config Data.vi, and Prompt Web Browser Path.vi), none of which have the AEH property enabled.  Nor does any of their calling VI's.  All three instances also have their error out cluster wired.
    A utility to examine the AEH property of all VI's (with all top level and dynamic VI's loaded) in memory reported that only 1 of 308 vi's ( RGT Does File Exists.vi from the Report Generation Toolkit) had that property true.  That vi has no subVI's other than the File/Directory Info primitive and no calling VI's in common with any of the vi's that call New File, except a top level VI.
    As long as 'Enable automatic error handling dialogs' remains unselected in options>block diagram, I am unable to get an AEH dialog for either the New File or File/Directory Info primitives in a test VI with AEH property enabled and their error out clusters unwired no matter what invalid path I pass to the functions.  As soon as the options>block diagram>Enable AEH dialogs' is selected, both primitives fire AEH dialogs with no error out wired and don't when wired. i.e. works as advertised.
    In other words I can find no reason why I should have gotten the problem AEH dialog...
    I cannot afford for this app to hang because of a network problem, other portions of the app that were running concurrently correctly handled the error and, had the AEH dialog not appeared, the app would have made corrections or shutdown in an orderly fashion.
    Any ideas?

    Very good.
    Write Characters to File.vi>Open/Create/Replace File.vi>New File
    New File throws the error.  Open/Create/Replace strips the hierarchy from the source of the error.  Write Characters passes it to the General Error Handler.  I never looked above O/C/R file in the hierarchy except for enable automatic error handling property.  The tip-off should have been to realize that O/C/R file was stripping the hierarchy from the error and look above that. 
    The real irony is that Write Characters was being used to log error cluster data to an error log file...
    Save as... Copy without updating... the OEM 'Write Characters to File' is gone from this app.
    Thanx (a bunch)

  • Is there a way to create a vertical menu for tablet that stays in place?

    I am a novice in web design, and I want to make a vertical menu for a tablet page that stays in place.
    It should not scroll, and  it has to resize depending on screen size, so it looks the same across different tablet sizes.
    Is this possible in Muse? After reading some posts I am getting the feeling this is not possible at all, is that really true?
    If it can't be done in Muse, can I do it another  way? In Dreamweaver for instance?
    The reason I want this is that in my opinion horizontal menu's for tablets are ergonomically bad design, and just plain annoying. You always have to use two hands, lift one hand and then you probably block the view of the screen.
    Vertical menu's for tablets just make more sense since they can be made so that you could place them on the side of the screen so it would be possible to navigate with the hand that is holding that side of the tablet.
    I hope someone can help me.

    Yes, I am using the widget.
    It seems it is not possible to make the menu stick in tablet design (the pin options are greyed out). Nor is it possible to make the menu scale with screen sizes.
    A possible solution would be the ability to make it stretch to 100% screen size, like you can with horizontal objects.
    I have noticed though, that, for some reason, in web design it is discouraged or very hard to make things stretch 100% vertically. It seems to cause problems, and I don't understand why.
    Since I have started in web design, I have seen many posts of people having design problems, where stretching 100% vertically would be the obvious solution.

  • What are the appropriate document/stage dimensions in Flash for tablet optimized apps?

    What are the appropriate document/stage dimensions in Flash (width x height in pixels) for tablet optimized apps?
    (Dec. 2013)
    Using Flash and AIR for Android/iOS I would like to develop a educational interactive title optimized for tablet PCs, hopefully both the Android but finally also the iOS platforms. With so many tablets on the market today and with different resolutions (and even aspect ratios) I have difficulty deciding what document/stage size to set for my project/app. I have been experimenting with an Android Google Nexus 7 and Samsung Note 10 tablets and discovered that Android automatically resizes the app's stage to fully fit the screen of the tablet BUT this creates the following two issues for me:
    if the stage/document size in Flash is too small and I include bitmaps when the app's stage is enlarged to fit the tablet screen the bitmaps look pixelated.
    If I make the stage dimensions too big so that there is no bitmap pixelation because the bitmaps will be shrank instead of enlarged, I am afraid that on some older tablets with slower processors the app may be too slow to run (but I have to say that I did not experiment with very large stage dimensions yet).
    Until today I had looked at some of the most commonly used tablets on the market and their resolutions Google Nexus 7, Samsung Note, iPads etc and was inclined towards using a stage size of approximately 1280 x 720 pixels which I considered a medium solution, but now the new generation tablets came out (Nexus 7 gen 2, iPad Mini with Retina, iPad AIR etc) with much higher resolutions so I don't know what size to use now. Anybody has any suggestions?
    I would appreciate any ideas and suggestions on this matter.

    You explained your problem well enough that looking at the picture won't matter.  It looks like you found out too late that one of the first things you should do when you create a Flash file is set the movie properties, which include the dimensions and other things like background color, frame rate, publish settings, etc.  While the string that I just listed can pretty much be revised anytime, the dimensions should really be done before anything else, when possible.
    One way to go about resizing is to leave the file as is and specify the larger dimensions in the html page code.  This could end up reducing the quality of any bitmaps you might have in the file(s) since you would essentially be enlarging them, but any Flash drawn elements will resize cleanly.
    If you resize the stage, then you don't have much choice but to resize and relocate everything in it keyframe by keyframe.

  • Do you have any more information about the Lightroom Mobile for tablet?  [was:Information]

    Hey just doing a check. In. Do you have any more information about the Lightroom app for tablet?  Like when it is coming out, what features will it have?  Because I can't Waite. Especially for editing a raw file on a tablet. Excited. 
    I do have a  Few questions. 1. Will the app have a library mode that allows the photographer to display the raw files  on the app like how photo shop touch does. Example. When your  import a photo from the iPad it shows up in the photo app that Apple makes. But when you take that photo into photo shop and save it as a psdx file, the project or photo does not show up in the original photo app by apple.
    2. Will the app use the smart previews when you import a raw file on to the iPad the same as you do with a computer? 
    3. Do you have to Waite to go home to edit a raw file or can you edit on the tablet once you import the photo from camera to iPad? Instead of going home import to computer into Lightroom 5, then to adobe cloud, then to iPad.
    4. Will the app display catalog, book, etc modes like Lightroom 5 has?

    At this stage, we don't know any more about Lightroom Mobile than Adobe revealed in Sep 2013
    http://laurashoe.com/2013/09/09/on-the-adobe-horizon-lightroom-mobile/
    Adobe will reveal more when they're good and ready.

  • How can I copy or print all text highlights in Adobe Reader for Android?

    I read many tech books as pdfs. And highlight the parts I want to note.
    Since I am now reading them on an Android Tablet using Adobe Reader for Android, I need to find a way to move my highlights to a separate doc when I am done reading. I don't see instructions for this anywhere.
    How can I copy all text highlights at once from a document?
    And / or
    How can I print all text highlights from a document?
    Thanks,
    ken

    Thanks.
    Kindle Reader will let me do that with Kindle books and docs that I buy from
    Amazon, but not with personal docs (such as pdfs) that I import, unfortunately.
    Is a VERY useful feature!

  • After creating a form from an existing document, viewing it in Adobe Reader for Android only shows the form fields, and not the document behind it.

    Using an existing PDF file to create an editable form that I can update on my tablet as I go, but when I open the file on my tablet (using Adobe Reader for Android), it only shows the blue editable fields that I've created, but not the actual form that's supposed to be behind it. However, it views properly on my PC. Am I not saving it out correctly?

    Please share the sample file with me. I am sending you instruction via private message.
    Regards,
    Anoop

Maybe you are looking for