Reader incompatible with system configuration

Installing Reader Xl has turned all of my icons into Adobe symbols and will not open. Dialog box says that protected mode is incompatible with system configuration but still will not open even if I click to disable proteced mode. I cannot open Adobe Reader either. I use Windows 7

I have uninstalled and reinstalled several times. If my browser gets closed I have to uninstall the program just to open my browser or any other program. I scanned with Kaspersky TDSS Killer and it showed up clean. I have went to the Adobe Properties and tried it on the compatibility pack for windows 7 and also tried it on XP service pack 2. No luck.

Similar Messages

Adobe reader incompatible with system

When I try to open a document with Adobe Reader i get a message that says it is incompatible with my system. My system is Windows 7. How can i fix this?

start here (and untick mcafee unless you're certain you want it), http://get2.adobe.com/reader/
that link should display your os and language and offer a compatible version.

Problems With System Configuration

System Configuration is altered and not repairable. Selective startup is persistent. Normal startup is selected, but the Apply button is greyed out, inaccessible, and system always remains in Selective startup. As a result, Current User profile is probably
corrupted. Windows Store will not install (services are corrupt, SFC and DISM did not work). Outlook profile was deleted, needed to be reinstalled, and can not receive mail. Excel math engine totals values higher than actual amounts. IE automatically signs
into all Microsoft accounts (reset to default settings worked for a log on, but automatic sign in resumed afterwards).
Are there any solutions?
Office diagnostics produced the following report.
Diagnostic Results
None of the Microsoft Office Diagnostics found any problems.
More resources
Setup Diagnostic — File corruption or altered file
The Setup Diagnostic repaired problems with your installation of Microsoft Office. Your Microsoft Office programs should now function correctly.
If your Microsoft Office programs continue to crash, the source of the problem may be a hardware failure or hardware configuration problem. Review the results of the Disk and Memory Diagnostics to determine if a hardware failure is affecting your installation
of the 2007 Office release.
More resources
Setup Diagnostic — Missing media
The Setup Diagnostic was not completed because a valid source was not found. Either the local installation source is missing, or the original source that was used to install Microsoft Office is not available to the repair process. You may need to provide
the original source to allow this diagnostic to run successfully. Valid sources for the 2007 Office release include the following:
Your 2007 Office release installation CD
An installation disk or repair CD provided by the vendor of your computer
A connection to a network installation of the 2007 Office release
After you obtain access to a valid source, run Office Diagnostics again.
More resources
Disk Diagnostic — Failure of hard disk predicted
The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors that may indicate that the hard disk is likely to fail. SMART is a feature that some disk drive manufacturers provide to give users advance notice
of potential hard disk failure. Instability in your Microsoft Office programs may be the result of these hard disk drive errors.
Note This result can indicate a severe problem, but some hard disks may not accurately report their results.
We recommend that you do the following:
1.Back up your important data immediately.
2.Check the results of other diagnostics, and follow the instructions for resolving any issues that the other diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
3.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
More resources
Disk Diagnostic — Errors in system event log
The Disk Diagnostic found evidence of hardware errors. Instability in your Microsoft Office programs may be the result of these hardware errors.
This result occurs if one of the following has happened recently:
The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors. SMART is a feature that some disk drive manufacturers provide to give users advance notice of potential hard disk failure.
Microsoft Office Diagnostics has found blocked-out (failed) sectors on your hard disk.
Microsoft Office has had trouble accessing files from the hard disk; it needs these files to function properly.
We recommend that you do the following:
1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
2.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
More resources
Memory Diagnostic — RAM failure
The Memory Diagnostic found evidence of failure in the random access memory (RAM).
We recommend that you do the following:
1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Memory Diagnostic issue is resolved.
2.If you continue to get this result, do either of the following:
Run a Microsoft Windows memory diagnostic. For more information, see the following:
Windows Vista How do I know if my computer has a memory problem?
Microsoft Windows XP Windows Memory Diagnostic
Contact someone, such as the vendor of your computer or RAM.
More resources
Memory Diagnostic — User is not an administrator
The Memory Diagnostic was unable to run because you do not have administrative rights on this computer. To successfully run the Memory Diagnostic, someone with administrative rights must log on to this computer and run Microsoft Office Diagnostics.
More resources
Update Diagnostic — Installation is out of date
The Update Diagnostic determined that your installation of Microsoft Office does not have the latest service packs installed. Installing service packs improves stability. We recommend that you visit Downloads on Microsoft Office Online, and then, under Office
Update, click Check for Updates.
More resources
Compatibility Diagnostic — Conflicting versions of Outlook found
The Compatibility Diagnostic identified conflicting versions of Microsoft Office Outlook. To remove the version of Outlook from your computer that you do not want, do the following:
Microsoft Windows Vista
1.Click the Start button, and then click Control Panel.
2.Click Uninstall a program.
Note In Classic view, double-click Programs and Features.
3.Select the version of Outlook that you do not want, and then click Uninstall.
Microsoft Windows XP
1.Click Start, and then click Control Panel.
2.Double-click Add or Remove Programs.
3.Select the version of Outlook that you do not want, and then click Remove.
More resources

Check disk and memory diagnostics found no errors.
SFC and DISM listed errors when performed in diagnostic start up. Commands changed from previous attempts. Before SFC and DISM only had to be entered as SFC and DISM. Presently, additional commands are required.
Log Name:      Microsoft-Windows-MemoryDiagnostics-Results/Debug
Source:        Microsoft-Windows-MemoryDiagnostics-Results
Date:          8/21/2014 12:51:09 PM
Event ID:      2001
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:      TAS
Description:
Windows Memory Diagnostic results
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-MemoryDiagnostics-Results" Guid="{5F92BC59-248F-4111-86A9-E393E12C6139}" />
    <EventID>2001</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-21T16:51:09.612555200Z" />
    <EventRecordID>1</EventRecordID>
    <Correlation />
    <Execution ProcessID="5296" ThreadID="5300" />
    <Channel>Microsoft-Windows-MemoryDiagnostics-Results/Debug</Channel>
    <Computer>TAS</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <Results xmlns="http://manifests.microsoft.com/win/2005/08/windows/Reliability/Postboot/Events">
      <MemDiagRawData>89170000000000000200000003000000050000000A000000D80300000C0000000200000000000000964017005B090000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C800000000000000707E748DCE00000001000000C800000000000000C8000000000000000C00000038000000DE07080015000C001E00200000000700964017005B09000001000020000001000C00010000000000020001001E00010000000000040001004200010000000000060001002E0001000000000001000100660001000000000003000100EC00010000000000000001000D00020000000000020001001D00020000000000040001004200020000000000060001002F0002000000000001000100650002000000000003000100EC00020000000000</MemDiagRawData>
    </Results>
</UserData>
</Event>
Windows Resource Protection could not start the repair service.
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>DISM
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
DISM.exe [dism_options] {Imaging_command} [<Imaging_arguments>]
DISM.exe {/Image:<path_to_offline_image> | /Online} [dism_options]
         {servicing_command} [<servicing_arguments>]
DESCRIPTION:
DISM enumerates, installs, uninstalls, configures, and updates features
and packages in Windows images. The commands that are available depend
on the image being serviced and whether the image is offline or running.
GENERIC IMAGING COMMANDS:
/Get-MountedImageInfo   - Displays information about mounted WIM and VHD images.
/Get-ImageInfo          - Displays information about images in a WIM or VHD file.
/Commit-Image           - Saves changes to a mounted WIM or VHD image.
/Unmount-Image          - Unmounts a mounted WIM or VHD image.
/Mount-Image            - Mounts an image from a WIM or VHD file.
/Remount-Image          - Recovers an orphaned image mount directory.
/Cleanup-Mountpoints    - Deletes resources associated with corrupted mounted images.
WIM COMMANDS:
/Capture-CustomImage    - Captures customizations into a delta WIM file on a WIM Boot system. Captured directories include all subfolders and data.
/Get-WIMBootEntry       - Displays WIMBoot configuration entries for the specified disk volume.
/Update-WIMBootEntry    - Updates WIMBoot configuration entry for the specified disk volume.
/List-Image             - Displays a list of the files and folders in a
                            specified image.
/Delete-Image           - Deletes the specified volume image from a WIM file
                            that has multiple volume images.
/Split-Image            - Splits an existing .wim file into multiple
                            read-only split WIM (SWM) files.
/Export-Image           - Exports a copy of the specified image to another
                            file.
/Append-Image           - Adds another image to a WIM file.
/Capture-Image          - Captures an image of a drive into a new WIM file. Captured directories include all subfolders and data.
/Apply-Image            - Applies an image.
/Get-MountedWimInfo     - Displays information about mounted WIM images.
/Get-WimInfo            - Displays information about images in a WIM file.
/Commit-Wim             - Saves changes to a mounted WIM image.
/Unmount-Wim            - Unmounts a mounted WIM image.
/Mount-Wim              - Mounts an image from a WIM file.
/Remount-Wim            - Recovers an orphaned WIM mount directory.
/Cleanup-Wim            - Deletes resources associated with mounted WIM images that are corrupted.
IMAGE SPECIFICATIONS:
/Online                 - Targets the running operating system.
/Image                  - Specifies the path to the root directory of an offline Windows image.
DISM OPTIONS:
/English                - Displays command line output in English.
/Format                 - Specifies the report output format.
/WinDir                 - Specifies the path to the Windows directory.
/SysDriveDir            - Specifies the path to the system-loader file named BootMgr.
/LogPath                - Specifies the logfile path.
/LogLevel               - Specifies the output level shown in the log (1-4).
/NoRestart              - Suppresses automatic reboots and reboot prompts.
/Quiet                  - Suppresses all output except for error messages.
/ScratchDir             - Specifies the path to a scratch directory.
For more information about these DISM options and their arguments, specify an option immediately before /?.
Examples:
    DISM.exe /Mount-Wim /?
    DISM.exe /ScratchDir /?
    DISM.exe /Image:C:\test\offline /?
    DISM.exe /Online /?
C:\WINDOWS\system32>DISM.exe /English
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Error: 1639
No DISM options were specified on the command-line.
Run DISM with a command-line option specified, such as /Image or /Online. For more information, refer to the help by running DISM.exe /?.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

Reading access to System Configuration

Hi,
we need a role for developer which can perform only read-access to all tasks of Workset "System Administration".
I have created a role and I have added workset "System Administration" (Portal Content --> Content Provided by SAP --> Admin Content --> System Administrators --> Worksets --> System Administration) to role. I have modified the workset in the role by deleting not needed pages. I have modified Security Zones (System Administration -> Permissions -> Security Zones -> com.sap -> Netweaver.Portal -> high_safety ) for that role (ADD the created role with None/ Enduser). I have also changed the permissions of folder Portal Content (ADD new role with read / No Enduser).
But the user with the created role has write/delete access to all System Administration objects like System Administration --> Themes or System Administration --> Knowledge Management --> System Configuration.
Do anybody of you have an idea how I can modify the System Administration Workset permissions so that the user only have read-access to the objects?
Regards
Sabine

Hi,
it doesn't work.
Let me explain once again. I have created a customized role and I have applied two workset as delta link to workset System Administration and Content Administration that means the role contains two worksets - workset "Content Administration" and workset "System Administration". I have assigned the role to the user and it works for workset Content Administration. That means the use can read the PCD Content and the KM Folder but the user can not modify. But for the second workset - System Administration - it doesn't work.That means the user can perform modifications in the whole System Configuration items.
Regards
Sabine

Adobe Reader incompatible with Windows Internet Explorer 9

I recently installed the update for Windows Internet Eexplorer 9 on my laptop (Vista Home Premium) and have installed the latest Adobe Reader as well.
After installing Windows IE 9 I found that I was not able to view any letters etc online where Adobe Reader was required.
I tried all the suggestions in the associated help screen to no avail, so I finally 'uninstalled' the Windows I E 9 update and magically I was once again able to view online letters etc.
I am wondering why the latest Adobe Reader is incompatible with Windows I E 9?
Any help would be greatly appreciated.
Judith Matthews [email address removed by host]

I believe IE9 is not supported with Reader9, but everything should work as usual. I have both on my machine and am able to use them without any problem.
Try repairing Reader from Programs in Control Panel.
Kindly refer to System Requirement section in http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_ReleaseNote_9.5.pdf

Safari suddenly "incompatible with system" ?!?

We recently had to get our G4 Titanium laptop repaired -- the power socket was damaged. While in the shop, the repairmen said they had to reinstall the system -- Mac OS 10.2. But now Safari won't open -- it says it's incompatible with the system. I re-downloaded Safari 1.0, and it still says it's incompatible, and won't open. Help! I much prefer Safari to Explorer now, and don't understand what the problem is. When they reinstalled the system, they put the old system in s "previous systems" folder. Is that fouling things up? Thanks in advance for any help.

Have you tried clearing the System Cache and System Preferences on your computer? If the shop re-installed your operating system it's likely they "archived" you OS when they re-installed the system in order to preserve any software that was on your computer. It's possible that you have scrambled preferences files or system cache files which are "confusing" the operating system and preventing Safari from operating properly. Once you delete the files, "restart" your computer and the operating system will rebuild the system cache and preferences files afresh. Also, clear the Safari cache and preferences files, there may be two sets or a set that's not connecting to your current copy of Safari which may be causing the program to not run properly. If you're looking for specific instructions on how to do this, check the Apple Knowledge base. You should be able to find the detailed instructions along with do's and don'ts guidance. Hope this helps...

Field symbols and READ TABLE with system code 4

Hi,
I have a hashed table and I am using field symbols to point to it to retrieve the field content. I then use it in the READ TABLE statement in the following way:
Loop at x_data assign <fs>.
ASSIGN COMPONENT 'xxx' OF STRUCTURE <fs> TO <c1>.
ASSIGN COMPONENT 'xxx' OF STRUCTURE <fs> TO <c2>.
READ TABLE ZZZZ assign <fs> with table key a1 = <c1>
a2 = <c2>.
If sy-subrc = 0.
endif.
I ran the debugger and I keep getting a 4. I am not able to get the value from a1 and a2 to see what it is and why it is causing a 4 sy-subrc. I know the value from the hashed table and the values c1 and c2 are the same, so the sy-subrc should be 0.
How would I read a hashed table using field symbols? I know that usig a standard table, I have to sort the table on the key fields() before I actually can do the READ TABLE using the binary search.
Please advise. Thanks
RT

Hai Rob
Go through the following Code
Field-Symbols are place holders for existing fields.
A Field-Symbol does not physically reserve space for a field but points to a field, which is not known until run time of the program.
Field-Symbols are like Pointers in Programming language C .
Syntax check is not effective.
Syntax :
Data : v1(4) value abcd.
Field-symbols <fs>.
Assign v1 to <fs>.
Write:/ <fs>.
DATA: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB LIKE SORTED TABLE OF LINE WITH UNIQUE KEY COL1.
FIELD-SYMBOLS <FS> LIKE LINE OF ITAB.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2.
APPEND LINE TO ITAB.
ENDDO.
READ TABLE ITAB WITH TABLE KEY COL1 = 2 ASSIGNING <FS>.
<FS>-COL2 = 100.
READ TABLE ITAB WITH TABLE KEY COL1 = 3 ASSIGNING <FS>.
DELETE ITAB INDEX 3.
IF <FS> IS ASSIGNED.
WRITE '<FS> is assigned!'.
ENDIF.
LOOP AT ITAB ASSIGNING <FS>.
WRITE: / <FS>-COL1, <FS>-COL2.
ENDLOOP.
The output is:
1 1
2 100
4 16
Thanks & regards
Sreenivasulu P

I cannot access safari. Get error message: deals with system configuration. Tried basic reinstalling of OSx

Suddenly I am unable to access Safari when I click the icon. Read book and followed basic troubleshooting: reinstall Mac OS X & applications. Icon there but still cannot access. Error code reads: cannot be openned b/c problem; deals w/system config. System still under warranty. What am I doing wrong? Any thoughts out there?
angelia m

Suddenly I am unable to access Safari when I click the icon. Read book and followed basic troubleshooting: reinstall Mac OS X & applications. Icon there but still cannot access. Error code reads: cannot be openned b/c problem; deals w/system config. System still under warranty. What am I doing wrong? Any thoughts out there?
angelia m

X201 finger reader active with system off

The fingerprint reader stays on when my laptop is asleep or off. The green LED will be active, and when I slide my finger on it, the red one lights up.
I believe the fingerprint reader is a usb device, so this could be due to the new bios option to enable usb power when the system is off. The issue is that the LEDs are on even when my laptop is unplugged! This is a useful feature to me for charging devices, but I don't want usb devices drawing power when my computer is unplugged.
Any ideas?

You have a couple of settings in the fingerprint application. One is found under the "More Settings" tab where you can remove the check that says "Enable indicator lights on sensor" if you don't want this light. I don't think that one will draw much power though. There is also a setting under the "Authentication" tab that says "Use fingerprint scan instead of power-on button". I believe this is the setting that allow you to turn on the computer using the fingerprint reader. I'm not 100% sure, but i believe there is a similar setting in BIOS where you also can disable this feature.
-gan

Report with system configurations of a landscape

Hello,
Is there a way (report, t-code...) to get a report of all components in a system, or systems of a solution. By components I mean, server info (cpu, memory...), installed OS, SAP Version, SAP SP versions...
The aim would be to easily extract the desired info into an excel sheet.
Thanks in advance.

Hello David,
I think you really will want to read this Blog!
/people/tony.dethomasis2/blog/2010/01/23/alm-functionality-teaser-2-landscape-reporting
Its what you are looking for and more.
Regards,
Paul

Cannot install itunes on computer says system configure

Trying to install itunes on computer keeps comming up with system configure error please help

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Apply System Configuration Settings Broken in SIU

I'm making a NetRestore image for a small lab with 14 MacBooks.
I want to apply Computer Name and Host Name and ByHost preferences to the clients.
I'm building a NetBoot image in System Image Utility using the Apply System Configuration Settings to Apply Computer Name and Hostname settings from a file, using a tab delimited file of MAC_Addresses(en0), Computer_Names and Hostnames. Here's a few example lines:
70:cd:60:28:13:14     Abana     Abana.local
70:cd:60:37:9f:ee     Abigail   Abigail.local
70:cd:60:38:8c:ea     Afra      Afra.local
Finally I'm using Change ByHost preferences to match Client after install to change a few settings like the visibility of Bluetooth in the menu bar and activating iChat's Bonjour Messaging.
The trouble is that the name and hostname never get applied and the ByHost settings don't end up matching the retored Client. It seems as if the step is simply ignored, even though it show that it completed successfully.
Has anyone successfully used Apply System Configuration Settings in Lion Server's System Image Utility?
My Workflow is fairly simple:
-Define Image Source (A preconfigured Lion client install on another partition)
-Enable Automated Installation (With Automatic Erase of "Macintosh HD")
-Apply System Configuration (As explained above)
-Create Image (NetRestore)
The workflow completes everytime without error after 2.5 hours for an 11GB image and the clients NetRestore just fine but the System Configuration Settings remain unchanged. Help? Ideas? Experience? Documentation?

Hi Ed Palma,
I have the same problem.
The NetBootClientHelper, who sets your System Configuration Settings, is not correct installed in your NetRestoreImage after creating an Image.
I try manually install the NetBootClientHelper in my Master-Installation and create a Image again.
Here are the steps necessary to get the necessary files to manually install the NetBootClientHelper in you Master-Installation.
1. Create an NetRestore-Image, or use your exsisting Image with System Configuration Settings
2. Open (mount) in .NBI-Folder your NetInstall.dmg
3. Goto Packagesa > Extras an Copy these Files to your Desktop/tmp
Here you can find the files do contain the System Configuration Settings, as sharingNames(.plist) an bindingNames(.plist) and the NetBootClientHelper-files an Startup-files.
4. Goto var > tmp > niu > postinstall an open the installClientHelper.sh with Texedit.
Here you can see which files you must be installed in you Master-Installation so that the NetBootClientHelper automatically starts at the fist boot.
This is a work-a-round, I hope that apple solve this problem with the next update.
Sorry for my bad english and good luck.
Tim

Issue with latest Adobe Reader 11.0.10 - Adobe Reader cannot open in Protected Mode due to incompatibility with your system configuration.

Since updating to the most recent Adobe Reader v11.0.10, getting an Adobe Reader Protected Mode: Adobe Reader cannot open in Protected Mode due do an incompatibility with your system configuration. Would you like to open Adobe Reader with Protected Mode disabled?

The solution I was looking for was to launch Adobe Reader in Protected Mode.
I could not identify issues preventing Protected Mode from starting. What ended up working, was to do a complete uninstall, followed by a reinstall. Now we can load Reader in Protected Mode.

Adobe Reader cannot open in Protected Mode due to a problem with your system configuration.

From Adobe website: "Note that this list is not regularly maintained as Protected Mode now runs transparently in the background and it is unlikely that users will experience issues."
This explanation on the Adobe website does not explain what the problem is with the "system configuration". What is the system configuration problem?

Hi Steve,
As mentioned on the troubleshooting page as well normally application like antiviruses, encryption and system maintenance tools causes this kind of problem. These software software intercepts some system calls for the Reader sandbox. Could you please check if you have any of these kind of software installed? Could you please answer following question then I would be in better position to help you?
1. Version of Reader being used
2. OS
3. What happens if you choose launch unprotected? Do you see a failure or Reader launches?
Thanks

Adobe reader cannot open in protected mode due to an incompatibility with your system configuration.

I keep getting the error message: Adobe reader cannot open in protected mode due to an incompatibility with your system configuration.
I have Windows 7 Home basic Service pack 1 and have already uninstalled and re-downloaded Adobe reader XI twice. I have also read other threads on this forum, and
tried the suggestions, including running Kaspersky anti-rootkit, no threats were found.
My Adobe reader shortcut icon shows a small blue and yellow shield in the bottom right (I uninstalled Windows essential protection), but the problem prevails.
I would rather get to the root of the error and fix it and not just disable protection mode!
Please help.

Hi,
Please refer to the solution in:- Error: “Acrobat Failed to Load core DLL”.
Also, may want to try disabling all Non-Microsoft Startup Services.
Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html
Regards,
Nakul

Reader incompatible with system configuration

Similar Messages

Maybe you are looking for