Reader Shows Screen Artifacts and Slows Down

I am using Adobe Reader 9 on under Xfce on Fedora 17. I noticed that there are artifacts, often resembling a thumbnail of the document page, remaining on the screen and/or showing up at various places on the screen, even when the program is minimized.
I also notice that the program starts to slow down and stops being responsive to key strokes or mouse clicks.
No other program does this.

The first screenshot shows the artifact as described. It goes away if the program is closed. It doesn't always happen, but the program is unstable within the environment.
The second screenshot shows the version. (The program fails to allow copy and paste from that screen.)
There were no updates available when I checked with my package manager today.
Double check the opening message; there is no version 11.

Similar Messages

On iMovie for iPad2, is it possible to speed up and slow down voices?

On iMovie for iPad2, is it possible to speed up and slow down voices? (in order to sound like a chipmunk for example) I know that it can be done on a Mac, but what about iPad?

It it possible to speed up or slow down music from my iTunes file?
http://www.bulletsandbones.com/GB/GBFAQ.html#changeimportedtempo
(Let the page FULLY load. The link to your answer is at the top of your screen)
cut
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
(Let the page FULLY load. The link to your answer is at the top of your screen)
blend
open GB's help and search for "curve"
I am using music from my iTunes.
http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
(Let the page FULLY load. The link to your answer is at the top of your screen)

Wheel of doom spinning before I can log into the pro. Never happened before. The wheel spun a lot when i was using it yesterday and slowed down usage

wheel of doom spinning before I can log into the pro. So signing in was a panic attack in itself.
Never happened before.
The wheel has started to show up spun a lot when i was using it yesterday and slowed down general usage.
what is happening to the mac and what can I do to bring it back to life (before the rainbow wheel of doom)

If this has started happening suddenly without your having made any changes to your configuration, the it's likely that the boot drive is failing, or that there's some other hardware fault. Back up all data immediately, then run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

ATI 9800 Pro Mac SE - Screen Artifacts and Anomalies

Hello All,
I was lucky enough to be given a new video card this Christmas (ATI 9800 Pro Mac Special Edition). Unfortunatly I am having some serious issues.
When I frst installed the card in my G5 all seemed well, both my displays appeared to be working properly and I did not notice any problems. The next day I decided to update the ROM on the card to the latest offered by ATI; after doing this I began to notice some horrible screen artifacts and tearing.
Examples:
http://static.flickr.com/39/77612780675feadba0o.jpg
http://static.flickr.com/42/7761277964b07c6811o.jpg
As you can tell from the screenshots above this is not normal.
Here are some details of my Powermac:
Dual 2.0G5 w/ 3.5 GB of RAM
Running 10.4.3
Displays:
23" Apple (plastic) Cinema Display connected via ADC
17" Sony connected via DVI
And the ATI card:
Chipset Model: ATY,R350
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x4e48
Revision ID: 0x0000
ROM Revision: 113-A14402-126
I have attempted to downgrade the firmware on the card to the previous ROM offered by ATI; no luck.
I have taken the normal troubleshooting procedures:
- Repair permissions
- Clean caches
- Repair Disk
- Reseat video card
- Install a fresh copy of Tiger on a seperate drive
- Install different versions of ATI's software (currently using the most up to date)
- Remove ATI's software
- Boot into safemode
- Run one display at a time (first ADC then DVI)
It seems ATI support is out till 12/30; does anyone have any advice?
Thanks for all your help....
-Chris
Dual 2.0 G5 w/3.5GB RAM Mac OS X (10.4.3)

Hey, Chris...
Chipset Model: ATY,R350
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x4e48
Revision ID: 0x0000
ROM Revision: 113-A14402-126
I purchased this card on ebay as a new, unused Apple factory unit, which doesn't require the molex power drop from the superdrive. I've got a 20" aluminum cinema display and a 17" clear CRT studio display connected. My main problem is that I get random app freezing (mostly Safari, sometimes Preview, and occasionally Mail). I can browse with Firefox all day and not have a problem. Console shows nothing unusual, either.
Symptoms: cursor present and movable, but unable to click on anything, Dock icons don't display their names upon rollover, perpetual beachball in frontmost app, high-pitched screech coming from machine somewhere (unless 'Napping' is turned off in CHUD processor pref pane, then normal).
Until this evening, I was under the impression that these were freezes that required a hard restart - I had waited several hours for the symptoms to clear to no avail. Tonight I decided to try something: I pressed the power button on the 20" display, and then pressed the 'S' key to sleep the system (even though I got no feedback on screen). I waited a few seconds and then left the room for a minute or two, and when I came back, the machine was sleeping. I woke it up and found horrible corruption, which corrected itself after another sleep cycle.
I was actually preparing for an archive & install to see if maybe different drivers would be installed that alleviate the issue, but wasn't too hopeful.
Bizarre...
Now I'm not sure what to do. I haven't been able to use Safari for several weeks due to this. I had thought that since it only seems to happen with Apple apps, that maybe it was a core OS thing that 3rd party apps weren't affected by.
Dual 2 GHz G5 (Late 2003) Mac OS X (10.4.6) 1.5 GB RAM, 9800 Pro SE 256MB (OE replacement for original 9600 Pro 64MB)

My browser takes minutes to open then when the tab is fully loaded it will start saying "Connecting" and slow down or freeze.

When I open my browser, it takes 3-5 minutes to fully open. When I get to a website, randomly the tab will say 'Connecting' and slow down and take 10-15 minutes to function or freeze completely. This almost always happens on sites that require Flash Player use. I have uninstalled and reinstalled my Flash several times. I've added memory, as someone suggested it was a memory issue. It's so frustrating, please help!

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

What are the best editing softwares to create sequence shots and slow down video?, What are the best editing softwares to create sequence shots and slow down video?

What are the best editing softwares to create sequence shots and slow down video?, What are the best editing softwares to create sequence shots and slow down video?

Do you want free or do you want the best, your original post said best, now you are saying free. This is a contraction, there is no such thing as best free. There is such a thing as free and such a thing as best.
Also is your focus video or photos?????

Speed up and slow down tracks

I need a program that I can speed up and slow down tracks with. Is that possible in Logic Express? I know that it can be done in Logic Pro, however I don't need quite that much program.

xcuse me if i jump in here without answering the original question, but that brings up something similar to me:
if i have a setup in the arrange with a combination of various audio-files, apple loops and midi-tracks, and i want to record something additional into that (midi over connected edirol midi-keyboard): can i slow down the whole song, just to make it easier to record the new part without destructively destroying anything?
and after that just go back to the original song-tempo?
thanx a bunch for any thoughts!
again, sorry balletboy for jumpin in here, hope that is ok for you :o)

Making video start fast and slow down?

I am trying to avoid doing this in FCP because I know speed changed video can be jumpy...
Basically I have video that pans and I want to start fast, lets say 600% speed and slow down just at the end to 100%.
I know that in motion it doesn't work with percentages, so how's the best way to go about this. I tried variable speed, but It starts slow then speeds up...
Also, I would like to add a motion blur, is this achieved with activating motion blur in the render tab?
Thanks

Well, I had a bunch of videos that I overlaid with mattes to make it look like one continuous video... But the resulting video was 30 seconds and I needed it to be 5 seconds..
So I exported a QT movie and re-imported it into Motion. Then I just went to the Timing property and changed the speed to variable. This gave me a key frame at the beginning and end of the clip. So I just dragged the keyframe at the end to 150th frame (for 5 seconds).
But since I wanted to slow down the video just a tad at various points, I added a key frame to each area I wanted to slow. I then went into the Keyframe editor and made the interpolation to bezier, then just rotated the bezier to be horizontal. This slowed the video just a tad in each part.
I also changed the frame blending to motion blur blending.
Pretty straight forward once I got the hang of it.

Lion stalling and slowing down

Dead LION
Two-three months ago I upgraded to Lion (10.7.4)
The Lion discriminates a lot of applications
I should never have done that. Waste of money and especially a waste of my time.
There are NO essential news in Lion. It's just a monymaker for Apple
A bunch of applications does not work in Lion, while they been working fine in Snowleopard.
I could not delete the Lion and re-install SnowLeopard. (With out deleting all my datas).
I had to install SnowLeopard on a seperate external harddrive and now have to organize and disintegrate my else integrated work on two harddrives.
What a f'''''' bore. And absolute no thanks to Apple.
The Lion is stalling and slowing down, quits applications etc.
Since I installed the Lion on my computer (MacBook Pro 2 Ghz Intel core i7. 4 GB 1333 Hz DDR3)
is has been slowing down, in general and especially my browsers (Safari 5.1.7) (Google Chrome 13.0782.215) (Firefox 13.0.1). And Mail (5.2).
The OS quits applications, especially Mail and Safari.
The OS makes applications ever so often go in no-answer mode . Then I have to forcefully end them and start all over.
For speed and comfort I am back to 1991 Apple LC with 2 MB RAM. And no, the comfort was better then.
I have repaired disk with the OS own disktool.
I have reparied permissions again and again.
I have scanned for all problems and virus (MacKeeper).
I have rebooted and set the parametres to zero.
All applications are updated
Nothing helps.
I hope some of you friendly users or nerds can help. Thank you.
Best wisges Jan Knus

Sounds like a failed HD. Get another HD, install it, reinstall the OS, upgrade to Lion, and then restore the TM backup.

Can the wireless card in my mac wear out and slow down internet connection??

can the wireless card in my mac wear out and slow down internet connection??

Yes the WiFi card can wear out but not what you would really call wearing out like a pair of pants do. It can start to fail causing the connection between your computer and your Wifi router to slow down, IE transmit and receive less data in a given time period. And then it will fail completely.
But as to your internet connection being affected by a failing WiFi card no that can't happen.
If you turn the WiFi off and connect the computer to your router with an Ethernet cable does your internet browsing and downloading speed increase? If it does then there may be something wrong with the WiFi card in your computer or the WiFi section of your router. Hard to say which.
If after connecting the computer to your router with an Ethernet cable and your speeds do not increase then it is a problem with the router or on your ISPs end.

My ipod jumps, skips and slows down while playing songs. It is very annoying.

My ipod jumps, skips and slows down while playing songs. It is very annoying. Is it fixable??????

I have the same problem. Often, the songs worked perfectly fine before, even the previous day! Changing the format does not help either, nor does restoring iPod settings. In another case, a song WILL work after settings are restored, but after a few plays will return to its old state of making the ipod reset.

GE60 fan problem. speeds up and slows down constantly [EC reset done]

My model is GE60 OCN and bios and EC is the newest ones for win7 embeded on msi website.
I have the same problem with others if you search here 'ge60 fan'.
The temperature between 50~60℃ the fans runs slow and really quite.
But if the temperature goes down under about 46℃, it speed up and slows down constantly and it is annoying and much noiser.
I think msi should provide new EC firmware for this. Even the temperature is low, it annoys and nosier than when the temperature is between 50~60℃.
Please check this problem and provide new EC firmware for fan policy.
Someone has uploaded video link: youtube.com/watch?v=OQjjjVOpsEQ
this is exact problem with me as well.

I have exactly the same problem. Let's continue in the other thread (https://forum-en.msi.com/index.php?topic=165613.0)

Messages are in to be delivered state and slows down the message processing

Hello,
Messages are in to be delivered state and slows down the message processing.
this happenens in case of DB2 on some machine where the issue about high load on DB2 is caused by standard programming in SAP XI that executes a statement, where it uses the condition 'where 1<0' prio to the original SQL statement configured in the channel configuration,
Can you please help me out in solving this issue?
Thanks,
Soorya

Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords

Over the years and upgrading machines, I now have over 20k of emails in the import mailboxes within several folders. How can I archive these in way so the are still available, if necessary, to search, but don't load and slow down my mail app.

Over the years and upgrading machines, I now have over 20k of emails in the import mailboxes within several folders. How can I archive these in way so the are still available, if necessary, to search, but don't load and slow down my mail app.

Ok Thank you.
I wont worry now.
Just maybe dig in deep and delete the deleted mails that are still around and that will hopefully clean it up a bit.
Many thanks for your help and advice.
Regards
Chrispl0

Why does Facebook keep crashing and slowing down my phone?

Why does Facebook keep crashing and slowing down my phone? I have the latest updates. It's driving me insane. I want a different phone!!!!

Stankon69,
We understand how important staying in touch via Facebook can be. We encourage you to remove the application completely from your phone and then redownload the phone.
RobinD_VZW
Follow us on twitter @VZWSupport

Reader Shows Screen Artifacts and Slows Down

Similar Messages

Maybe you are looking for