Reader update 10.1.3 fails to install error 1648*

When attempting to update Adobe Reader to version 10.1.3 i get the following error "No valid sequence could be found for the set of patches" When looking at the event log an entry is logged with "Product Adobe Reader X MUI - Update '{AC76BA86-7AD7-FFFF-2550-7A8C400A1013}' could not be installed. Error code 1648. Windows Installer can create logs...........etc.
When I turned on WIN Installer logging, the same message appears of the no valid sequence could be found.
I have tried an fresh install of 10.0.0 and straight to 10.1.3 with the same results. I have tried the suggestion on Microsoft's site with the installer entries in the registry and such to no avail.
Same results on Win 7 and Vista both 32 and 64 bit versions.
I have googled and googled and have found no solutions or even any body else that has ran into the same problem. Hopefully somebody can provide a little insight on this as I have over 2500 systems to push the update to.
Thanks.

A little follow up -- I re-downloaded the update patch and now the size of the file is over 20MB versus 6MB. I downloaded the patch several times yesterday so there must have been a fluke in the download. I will attempt to see if will install properly now.

Similar Messages

Cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

I wish I fully understood your post, but perhaps you should try re-downloading. Are you trying to download the 10.7.3 update? If so, then try downloading OS X Lion Update 10.7.3 (Client Combo).

Help, creative desktop failed to install error code 1000

I just subscribed for the creative cloud and when I try to install the app it fails with the error Creative Dekstop failed to install error code 1000. Can some one shed any light on how to resolve this
Thanks

Link for Download & Install & Setup & Activation may help
-Chat http://www.adobe.com/support/download-install/supportinfo/

What is the problem with the newest version of iTunes (Failed to install - error 7

What is the problem with the newest version of iTunes (Failed to install - error 7 & missing MSVCR80.dll) - the DLL is not missing. tgried to install today and it failed - what a waste.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall go to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT201366 Security Update 2013-003 keeps failing to install - 'Unexpected Error occurred' - and now my MacBook Pro is running extremely slowly?

I have repeatedly tried to update the software 'Security Update 2013-003' on my MacBook Pro OS X Version 10.7.5 but it keeps failing to install, stating that 'an Unexpected Error Occurred'.
Since the update failed the first time, my MacBook Pro has been running extremely slowly and failing to open basic apps like Mail and Safari at times.
All other updates have been successful apart from this one. I have made sure that my MacBook isn't full (emptied Trash etc) but it still runs really slowly at times so I think it's linked with the Security Update failure.
Please help!
*I have tried installing the update from Support Downloads but it says there isn't space on Macintosh to install it. There is 190 GB of free space on that disk so I don't understand that at all.
LION system.

I have tried and it downloads successfully but when I install it, it comes up with this:

Update 9.1.3 failed to install

Hi all,
First time on this site so i hope ive done this right.
Ive downloaded the latest update but when i try to install it i get a message almost stright away saying CPSID_49522 failed to install.
What am i doing wrong?
Regards

Here's the trick. first you must download 9,1,1 then update to 9.1.2 then update to 9.1.3. Then you still must go into explorer and find acrdr 9,0 (I think that's the name of the file) and manually remove it. If you go to secunia.com and download their free personal security advisor it explains it in greater detail, plus it's one of the best utilities on the web and did I mention, it's free? I promise this will work.

System Update 5.0.2 fails to install on Windows 8.1 Preview

I am trying to install System Update 5.0.2 on a W520 running a fresh install on Windows 8.1 Preview. Solution Center is already installed. No other software has been installed on this box, other than standard windows updates.
When I try to install SU5.0.2, I can get to the EULA screen, click on the "I accept ..." toggle, Next button enables, but does nothing when I click it.
Any suggestions on how to SU5.0.2 to complete?
Thanks.
Tom
Here are the last lines in the tvsuSetup.log file after I try to press next, but before I cancel the install.
Action ended 10:23:37: CostFinalize. Return value 1.
MSI (c) (9C:3C) [10:23:37:709]: Doing action: MigrateFeatureStates
Action 10:23:37: MigrateFeatureStates. Migrating feature states from related applications
Action start 10:23:37: MigrateFeatureStates.
Action ended 10:23:37: MigrateFeatureStates. Return value 0.
MSI (c) (9C:3C) [10:23:37:709]: Skipping action: PatchWelcome (condition is false)
MSI (c) (9C:3C) [10:23:37:709]: Doing action: InstallWelcome
Action 10:23:37: InstallWelcome.
Action start 10:23:37: InstallWelcome.
MSI (c) (9C:3C) [10:23:37:709]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'InstallWelcome'
Solved!
Go to Solution.

So first of all you solution.
open Command Controll (CMD) (i would recommend in administator mode)
navigate to the folder where you saved your "systemupdate.exe"
type systemupdate502-06-26-2013.exe /s /a /v"/qn"
(this will install System Update silent. For more inforamtion about that you should visit the microsoft support)
Now wait a bit (depends on how fast your maschine is)
Now open Metro, press this new little "down arow" and there you must find your installed systemupdate
So and now a few words more:
I had this same Problem on a Leaked Final Windows 8.1 version. This means when in October Win8.1 will offical realease, Systemupdate will not work. I think lenovo should go back to his roots and provide the best support they could instead of blocking all work to Windwos 8.1 Threads. I know many people that buy your Laptops only because of the good support.

AppleTV software updates are downloading but fail to install. Help

New Samsung Smart TV and Home Theatre system. Also purchased new AppleTV.
When I go to AppleTV I get a message that new Software is available to download. When I agree it takes a while but when completed I get a message that the software has failed to install. Try again, but that never works either.

May need to restore via iTunes
http://support.apple.com/kb/ht4367

Skype Failed to install error 1603 after windows r...

Hey everyone! Thanks for any help in advanced.
Honestly after losing access to an old account and making a new account I've still been a long time fan of skype and love free 1 on 1 video calls. I'm really hoping this is an easy fix because honestly I've been looking at the skype community forums for the last hour and havn't been able to find a fix.
About 2 and a half hours ago I reduced the size of my only partiton on my 500 GB harddrive as much as I could. After doing this I reinstalled windows on the new 200ish GB partition. After installing and loading windows I coppied skype, smite, and steam from D:\Program Files to C:\Program Files (x86) and attempted to run skype. Skype opened and I signed in as usual but skype was having a really high CPU usage and kept reading/writing to some statistics.db file at several GB/s (Total IO was like 1.8GB/s, mostly write I think). The 13% cpu usage, although concerning as abnormally high, didnt really bog down performance too much. This high disk usage was really driving my mad as when it peaked my computer would almost stop responding and skype.exe would stop responding (although it resumed eventually). Skype in this state was unusable as any time the window was focused it almost crashed.
After this I decided to reinstall skype instead of using the backup I had. I went to uninstall skype and found that it didnt show up on the list to "uninstall a program" so I tried following as many steps I could at https://support.skype.com/en/faq/FA10634/how-can-i-completely-uninstall-and-then-reinstall-skype-for...
I've also followed all the steps here except for installing an earlier version of skype as I'm not sure what version to use. http://community.skype.com/t5/Windows-desktop-client/Skype-Problems-Troubleshooting/td-p/52260
I force ended skype.exe then made backups of my skype user and pictures folders. I skipped step 3 since it wasn't in the list. I then did steps 4-6. While doing this I noticed it said there may be "up to 50" references to skype in the registry but I noticed there were a lot more. I'm not exactly sure how many there were but I counted up to 40 and when I noticed I was only half way through the registry I started spamming "delete" key "enter" (to confirm deletion) as fast as I could. I'd say there were at least 70 skypes in the registry. I'm not sure if this registry includes things from my other installation of windows or if it got **bleep**ed up because of they way I tried to install skype.
After doing all this with my registry I rechecked to make sure the skype program files and skype app data folders were deleted and then tried to reinstall skype. Downloading from http://www.skype.com/en/download-skype/skype-for-computer/ I tried to reinstall it and all I did was unchecked "run skype when windows starts" hit next unchecked the bing and skype click to call stuff, hit next. After it said installing for a while it said installation failed error 1603.
I tried following advice of several posts on the forums and other sites, including going through the registry again, using Microsofts FixIt for install/uninstalls, and trying to install skype from another administrator account. After looking at several posts, trying all these fixes, and looking into it myself I'm really not sure what to do.
I've looked at all of the following posts and tried all the fixes I saw.
http://community.skype.com/t5/Windows-desktop-client/Skype-Problems-Troubleshooting/td-p/52260
https://support.skype.com/en/faq/FA10634/how-can-i-completely-uninstall-and-then-reinstall-skype-for...
http://community.skype.com/t5/Windows-desktop-client/Skype-using-100-of-my-disk-and-then-crashing-Wi...
http://community.skype.com/t5/Windows-desktop-client/Error-code-1603-installing-Skype-5-5-on-Windows...
http://community.skype.com/t5/The-Skype-Lounge/TheUberOverLord-Install-Issues-Check/m-p/156736/highl...
http://support.microsoft.com/mats/Program_Install_and_Uninstall/
http://www.msigeek.com/715/how-to-troubleshoot-the-error-1603-fatal-error-during-installation (This page gave me an "Error establishing database connection" page)
Not really sure what else to say or do, I've never really had to debug any programs or windows features before, and the only time I ever messed with the registry was a few windows installs before when I had to delete several instances of a self-reinstalling virus on my computer that spammed processes and lagged my computer.
Edit: After seeing this link I tried rerunning Microsoft's FixIt Install/Uninstall with the program ID from the folder name at %programdata%\Skype. I tried doing this and installing Skype from SkypeSetup_6.1.0.129.msi. Installation failed with some failed to read file totally forgot what it was. I then tried using the standard InstallSkypeFull.exe and it gave an actual error this time instead of the apparently "generic" error 1603 (see attached picture) After this installation failed I tried reinstalling from the 6.1.0.129.msi and it didn't say it failed. I'm about to try and open it.
Anddd opening Skype failed with the error message in the attached skype2 picture. I'm just going to close everything related to that except for this post and I'm going to close all my installers and debug stuff I have open and just wait for a reply. Currently I believe the system thinks skype is installed but I can't open it.
Solved!
Go to Solution.
Attachments:
skype.png ‏392 KB
skype2.png ‏232 KB

I'm afraid that after all the manipulations your system is so messed up that a regular Skype installation is no longer possible.
Try this:
Download but not run this msi-installer for Skype 6.9.0.106 version:
http://download.skype.com/msi/SkypeSetup_6.9.0.106.msi
Create a folder on your computer where you want Skype application to be located. This folder can also be C:\Program Files (x86)\Skype\Phone\, but any other location will work too.
Now using the procedure described here:
http://community.skype.com/t5/Windows-desktop-client/How-to-update-Skype-without-using-any-Skype-ins...
extract Skype.exe file from the SkypeSetup_6.9.0.106.msi file and copy this Skype.exe file to the selected installation folder.
Right click on the Skype.exe file and select: Send to – Desktop (create shortcut). You will have to start Skype using this new shortcut.
P.S. There is a new link to the latest Lessmsi program:
https://code.google.com/p/lessmsi/downloads/list

Iphone 6 plust update to 8.1 failed with unknown error (6)

Trying to update my iphone 6 plus to ios 8.1 using windows laptop running windows 7. It failed with giving message update failed with unknown error (6).
Exact error is:
     The iPhone "iPhone" could not be restored. An unknown error occured (6).
After this whenever I connect iphone to my laptop itunes shows serial number as n/a and it keeps on asking me to restore but always fails.
Any help in resolving the issue (either completing the update or restoring to factory defaults) is highly appreciates.
Thanks.
Checked the update logs and see the following at the end:
[11:07:48.0460] requested restore behavior: Erase
[11:07:48.0461] device did not return saved USB log
[11:07:48.0461] device did not return saved panic log
[11:07:48.0462] previous restore failed with exit status 0x100
[11:07:48.0463] connected to service com.apple.mobile.restored
[11:07:48.0464] using protocol version 13
[11:07:48.0464] unable to open device_map.txt: No such file or directory
[11:07:48.0465] board config = n56ap
[11:07:48.0466] no value returned for BootArgs
[11:07:48.0467] _copyDeviceProperty() failed for restore bootargs
[11:07:48.0468] no value returned for MarketingPartNumber
[11:07:48.0469] _copyDeviceProperty() failed for mpn
[11:07:48.0469] requested restore behavior: Erase
[11:07:48.0470] value query for 'HardwareModel' returned 'N56AP'
[11:07:48.0471] Established proxy for device ID 4
[11:07:48.0522] <Restore Device 06B9BF48>: operation 35 progress -1
[11:07:48.0525] requested restore behavior: Erase
[11:07:50.0998] <Restore Device 06B9BF48>: operation 28 progress -1
[11:07:59.0151] no override trust object found
[11:08:20.0357] device returned CFError with code 6
[11:08:20.0361] dumping CFError returned by restored:
[11:08:20.0364] CFError domainXXXXXXXXXXXXXXXXXXXin code:6 description:Fatal FDR Error returned from RestoredFDRCreate()
[11:08:20.0368] Sending acknowledgement that final status was received
[11:08:20.0759] Restore completed, status:6
[11:08:20.0759] Failure Description:
[11:08:20.0759] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
[11:08:20.0759]    Depth:1 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error 6 - Failed to handle message type StatusMsg)
[11:08:20.0759]       Depth:2 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error 6 - Fatal FDR Error returned from RestoredFDRCreate())

Hi sailesh.chopra,
Thanks for the question. After reviewing your post, it sounds like you are not able to update because of an error 6. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Just bought Creative Cloud single-app membership for After Effects (one-year) but I am unnable to download creative cloud on my latpot - message says "creative cloud desktop failed to install error code 1"

please help

Error Code 1: "Failed to install" | Creative Cloud Desktop : https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

Failed to install : error code 1

I cannot get the installer to complete installation. It gets about half way through the down load then gives me an Adobe Installer error box indicating:
We've encountered the following issues:
Creative Cloud desktop failed to install. (Error code: 1)
Any suggestions ?

hi,
Which OS are you using? Do you have any other Adobe software installed on your machine?
regards
deto w

ITunes Sync failed to install error

Hello everyone,
I'm fairly new to Apple forums, so please excuse the informalities and possible lack of information. The other day, I restored my iPhone from a backup made that same day. During the restore, I encountered this error numerous times: iTunes Sync: "xxxx" failed to install, where xxxx is the name of the app. This happened with numerous apps that I had opened that day, as well as with apps that I have not opened in some time. I am running a Windows 7 machine with iOS 6.1.3 installed on my iPhone. All of my other data (texts, call logs) seem to be transferring normally. I've tried restarting both devices, and have also tried to restore my iPhone numerous times since this happened several days ago, with no luck. It seems to be a problem with the app stored in iTunes - I can successfully run the app if I download it from the app store. That method isn't optimal because savegames and other saved files don't exist (within the newly downloaded apps). Does anyone have a solution to this issue, or has experienced a similar problem? Any help would be greatly appreciated!

hello,
same problems happend to me also. an error "Fifa 12 HD" failed to install. anybody with the solutions? we need help.
thanks,
Shy

AE update 11.0.3 fails to install on OSX Mavericks

I have tried installing this update and it gets to 99% then fails.....
any help?

did that.
I need to log in to install, but this is an enterprise account. I dont want to use my personal accout to install software on a work computer...
so I am SOL?

Windows update keeps trying but fails to install HP enterprise WSD multi-function printer update

I don't think we even need this update from Windows update but since upgrade to Windows 10, It keeps popping up as a failed update. I used to be able to HIDE unwanted updates. On this new os, I don't see an option to do that and the Windows 10 help site is NO HELP. Do I really need this and how do I stop the update notices? Thank you

Hi guys
The Acrobat is version 11.0.2 (Danish)
I'm downloading the patch AcrobatUpd11003.msp from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5593
I'm lunching the installed Adobe Acrobat XI it straight away promts me for updating the application through Adobe Updater.
Any Ideas what i can do to solve the problem, i need to deploy the update to quite a lot of pcs so i cant run the update manually.

Reader update 10.1.3 fails to install error 1648*

Similar Messages

Maybe you are looking for