Reader won't install; not enough memory

Reader won't install because I have 128 MB of memory and Reader requires 256MB. Original hard drive died and had to be replaced, but was replaced with original discs. I used Reader for years with original discs. Is there a way to install it? Windows XP SP2. Please help!

Use the forum for Adobe Reader.

Similar Messages

Mavericks won't install - not enough memory

I have successfully downloaded Mavericks and restarted. But it seems I filled my hard drive and it won't install, because it does not have enough memory. It seems Mavericks install created a new virtual startup disc, so every time I restart, Mavericks tries to install but finds out it does not have enough memory to do so. Is there a way around the new Mavericks startup disc to the old startup disc, which is on the same hard drive, so that I am able to clean up hard drive before installing Mavericks? I only have access to Terminal, Disk Utility and System information through Mavericks Installer menu. When I quit the Mavericks Installer, it tries to select a new startup disc, but does not find any. I have iMac with Intel i3 and latest OS X Mountain Lion before Mavericks install. Thanks for any help.

Thanks for reply. Yes, sorry, I don't have enough free disc space. The question is, how to get out of the Mavericks OS X Install process and start the computer using old system, old start up disc, which is on the same hard drive. Otherwise, I don't have a chance to clean up space on the hard drive and I am in the loop, Restart - Install OS X Mavericks - Finding out there is not enough space - Restart - etc.

ITunes won't start: Not Enough Memory

I downloaded iTunes 8, used it once-fine, tried to change the skin with Kameleon, now iTunes won't start. I get the error message: The iTunes application could not be opened. There is not enough memory available. I changed the skin back to the default, removed Kameleon from my system completely, shut down and restarted the MacBook and tried to open iTunes again. And, again the same error. Is this an iTunes issue with the new version or is this truly a memory problem??

I got this exact same error just now!
I also have Kameleon but didn't bother to change the skin on itunes.
It kinda ***. So it's Kameleon's problem or iTunes?

ITunes won't open: "Not enough memory available"

Whenever I try to open iTunes, I immediately get this error message: "The iTunes application could not be opened. There is not enough memory available." I click OK and iTunes quits, and that's the end of the conversation. Does anyone know why this is happening? It can't mean RAM, since I have 185MB free and 492MB inactive, and it can't mean HD space because I have 21.4GB free, which is unusually high. This just started occurring today, for no apparent reason. Please help me, I want to watch The Office!
Edit: I just tried running a copy of iTunes from a backup I have, and it works just fine, so it has to be something with my computer specifically.

Hey, I had a similar problem. . .
My problem was that I had mine skinned (with aqua for itunes) and for some reason it wouldn't open for that same error message i reopened aqua for itunes and told it to unskin it and restore it to regular settings and itunes works like a charm, does that help any (although i really like the look from aqua for itunes)

Archive and install - not enough memory

I have installed 2 recent updates and when I I was prompted to restart my macbook it would not start up (just the gray screen appeared with the wheel running).
I tried to archieve and install 0S 10 from the start up disk 1 provided with the macbook. However I cannot complete this as there is insufficient memory.
There are some recent files that I have not backed up so I do not want to erase and install from scratch. Is there a way to retrieve the files and delete some large ones and then do archieve and install?
Thanks for any help.

If you have another Mac around, use FireWire target disk mode...
http://docs.info.apple.com/article.html?artnum=58583
If not post back.

N82, Unable to install, Not Enough memory error, p...

Like installing some selected applications like Skyfire, Coreplayer, Palringo, but it just did that one time I needed to install the applications, when I bought it new it was fine.

I don't know how much memory you have in N82, but in N81 this was a frequent issue.
The problem was that the installation itself takes up a lot of memory, so in order to install a 3mb application I would need 6mb free. With some 12 mb total available and the normal operation soon taking up all but 5 mb this would be a problem. Back at the time I still had my N81 (It has been in service shop soon 4 months, a fact I have been pouring my heartt out elsewhere) I solved the problem that was installing both Maps 2 And NGage client like this.
I made a total reset of the phone, and started with maximum memory available. Then I started by installing the biggest applications first - NGage and maps 2 while I had the memory to spare for the installation process. Only then I would install the rest of the apps.
6267, N81, E71, BH-503, MD-7W, LD-3W

Not enough memory or disk space in excel and word office 365

I have windows 8.1 and am having huge issues with excel and word in office 365.
When i download a document i am unable to open as message reads cannot open as not enough memory or disk space.
I have plenty of disk space and memory however have searched this and the following has been answered BUT I CANNOT UNDERSTAND This and need HELP with step by step instructions on how to do please;
To resolve the issue, refer to the methods below:
Go to this key on Registry Editor (Run | Regedit)HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User
Shell Folders
change key Cache to something like C:\Windows\Temp
You might also right click on the file with file explorer, choose Properties, then General tab and click on the Unblock button.
Some of our customers found it sometimes a permission problem.
cmd => dcomcnfg
Click >Component services >Computes >My Computer>Dcom config> and select micro soft Excel Application>
Right Click on microsoft Excel Application>Properties>Give Asp.net Permissions
Select Identity table >Select interactive user >select ok
However i do not understand a word of the above or how to do PLEASE HELP this is extremly frustrating as i am doing correspondence and I am unable to access any files.
Thanks

Hi,
You must have read this thread:
http://social.technet.microsoft.com/Forums/en-US/9773a7c4-29a8-48ff-9d16-e1ca4c478610/excel-2013-microsoft-excel-can-not-open-or-save-anymore-documents-because-there-is-not-enough?forum=officesetupdeploy
To detail the steps, please do as I describe:
Important
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the
registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
To open the Registry Editor, please press Win + R, type regedit in the blank box, press
Enter. / Or we can type regedit.exe in Windows 8.1 Search, you'll find it easily.
Now the Registry Editor is open.
Then we see the pane on left, expand the following path:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
Then we can see a list on right, find Cache, right click on it, click
Modify..., under Value data, change the value to something like
C:\Windows\Temp, click OK.
Exit Registry Editor.
As for "You might also right click on the file with file explorer, choose Properties, then General tab and click on the Unblock button." Just find the file, right click on it, choose
Properties, under General tab, if you see a
Unblock button, click on it.
"Some of our customers found it sometimes a permission problem.
cmd => dcomcnfg" Do the following:
Press Win + R, type in cmd in the blank box, press
Enter.
In the new black-background window, type in dcomcnfg, press
Enter.
Then the Component Services window will pop up, on the left pane, expand
Component services -> Computes ->
My Computer -> Dcom config -> and select
Microsoft Excel Application, right click on it -> Properties ->
Identity tab -> Select The interactive user ->
OK.
I hope I've explained the steps clearly.
Good luck.
Regards,
Melon Chen
TechNet Community Support

I am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band as my sou d board only while recordinelse'

II am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band only as my sound board only while recording on something else and the. I will delete it.. Real P I A....

How do I upgrade the ram?
The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
Crucial
Other World Computing
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X - Yosemite
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

HT4623 Help updated my ipad with IOS 7.0.4. It asks me what language, chooses my wi-fi and then asks.........1 - set up as a new ipad, 2 - restore from iclouds or 3 - restore from itunes but won't restore as not enough memory! What do I do now?

Help updated my ipad with IOS 7.0.4. It asks me what language, chooses my wi-fi and then asks.........1 - set up as a new ipad, 2 - restore from iclouds or 3 - restore from itunes but won't restore as not enough memory! What do I do now?
I don't want to lose all my pics, songs etc
Whats my next move as I CANNOT use the ipas at the moment!!!!!!!!

Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

Photoshop CS2 Cannot read PNG files--"Not Enough Memory"

Hi! I have a bit of a problem. I've scoured the interwebs for days but can't find a solution.
My copy of PSCS2 was able to open PNGs in the past, but it just up and decided it doesn't want to anymore. I'm serious--I can't think of any major overhaul or anything I did to cause it, but now it won't read them correctly. It says there's "not enough memory," which doesn't really make sense, when I have a Macbook Pro and nothing running in the background. On top of that, the particular files I've been trying to open are barely 100kb. I've used canvases upwards of ten thousand square pixels in dimension with no problem.
This is with any PNG file. It's not an "incorrect extension" problem, because I made these files and just need to reopen them to edit things.
Here are some screenshots that show what's been happening; nothing exciting, but just in case someone notices something I don't:
That's the picture I want to open.
And that's what pops up.
:/ I'm a little dumbfounded. Halp?

Now, this is strange.
I restarted my computer and now the message has changed--to a simple one, but albeit still confusing.
Sigh.
I didn't do anything but restart my computer.

TS1702 When I Had To Do An Update For GarageBand On My IPad 2. I Had Not Enough Memory For a that App Update. So I Deleted It And When I Tried To Purchase It Again It Says Installing When It's not So I Cannot Purchase My GarageBand. PLEASE ANYONE HELP!

When I had to do an update for GarageBand on my ipad2. I had not enough memory to instal the update. So I deleted the app and tried to install my app again but it says installing when it's not. So I can't purchase GarageBand ever again. PLEASE HELP!

Hi Ben...almost the same issue...read mine...not sure yet if it is solvable !!!!

Not enough memory message in Reader XI

Since I updated to Adobe Reader XI, and the subsequent fixes, I cannot read or print any downloads from Google Chrome or Firefox. Specifically, I am trying to print tickets for a game tomorrow night and I keep getting a message "Not enough memory". I've tried uninstalling and reinstalling and still get the same message. Also, it doesn't seem that Chrome recognizes that I have Flash. Help please!

Both Chrome and Firefox use their own PDF viewer, not the Adobe Reader plugin.
Does the same thing happen if you download the PDF in question to your local disk, then open it from there?
P.S. Chrome also comes preinstalled with Flash; you don't need to install it yourself. Just make sure it's enabled.

Cannot install PPro CS4 - not enough memory????

I am trying to install the trial version of Premire Pro CS4 for evaluation purposes.
For some reason the installer reports that I do not have sufficient memory on the chosen hard drive, which I clearly have. See bottom left hand corner of the screen here:
http://tinypic.com/r/2eekdqu/6
The default drive chosen by the installer is C, which indeed does not have enough space, but the message remain regardless of the drive I change to. I already tried to go back and forward and change the drive selected to see if it will refresh properly, but to no avail.
Any idea how to make this work?
TIA.

Managed to solve the problem...
The problem was that PPro installer installs some shared files into the C drive in addition to installing the application itself to your chosen drive (which could be a different one).
The oversight on the part of the developers of the installer is that the 'not enough memory' warning message during installation corresponds to having not enough memory on either or both the C drive AND your chosen drive. At the same time the installer also gives an indicattion of the amount of memory available and the amount required, but without indication that this only correesponds to your chosen drive.... So, if your drive has enough memory, but the c drive doesn't the installer gives you two conflicting messages...
I now clear some space for the shared files on C, and the warning disappeared and everything installed and ran fine.
Thanks again for the help.

Installed os x 10.6.8 and office 2008 excel not enough memory on start

I just installed OS 10.6.8 and when I try to run Office 2008 Excel I get a "Not Enough Memory" pop-up and it will not open any files. Any ideas on how to resolve this? If not how do I revert back to original operation system?

How much RAM is installed in your computer? You need a minimum of 1 GB for Snow Leopard and at least 2 GBs or more for any practical uses.
To revert to your previous OS you need to boot from that installer disc and do an Erase and Instsll. Be sure to back up your files first because the procedure will erase the hard drive.

"There is not enough memory" message won't let me save

After running photoshop cs6 for an hour or two, I could not complete the save command because "there is not enough memory" message comes and my file won't save

sounds like you have some corruption going on, or perhaps a permissions issue (though I think that's less likely). Here are some things I'd try.
Create a new sequence with the proper settings for your footage. Copy all the clips in your old sequence and paste into the new sequence.
Create a new project with a new sequence. Copy and paste the clips of old sequence into the new sequence of the new project. Save As and give it a new file name.
Check the pathway to your Render folder and your Save folder. Make sure that permissions allow for READ AND WRITE all the way down. In other words, if your render folder is in:
Harddrive/FCP/Render
Then make sure all three have READ WRITE permissions applied. Do this by selecting them one by one and hitting CMD+I for info. Then look at the permissions.
Hopefully one of those options will help.
Andy

Reader won't install; not enough memory

Similar Messages

Maybe you are looking for