Reader X will not open any PDF

I am running Windows XP SP3 and have just insta
lled Reader 10.1.0 and it will not open any PDF's
created in earlier versions, and just gives me a Microsoft error messag
e any help would be appreciated.  have tried repairin
gg and uninstalling and re-installing.

Have the same problem and, while not a total solution, offer a work-around that might help you temporarily.
And, yes, I'm running XP SP3 as well, so.....
1.) Find the folder where the Reader X lives (on my system - /Windows/Program Files/Adobe/Reader 10.0/Reader).
2.) Locate AcroRd32 - the file with the Adobe icon.
3.) Right click and go to Properties.
4.) Set Campatibility to *Windows2000*
Reply "OK" to everything and try opening your file(s) again......
Now, you'll still get the Error message initially, and intermittantly, but the PDF window won't close; you can read the document and saving the file still works.
Again, it's not a fix, kinda cludgy, but it got me back on track even tho the message popping up is an annoyance.
Maybe Adobe will fix it as I've seen several folks here with similar experiences.
Happ New Year, btw!!

Similar Messages

  • Adobe Reader XI will not open any PDF file

    I have tried removing and reloading reader.  I have also tried using the WIndows Control Panel to repair the Adobe file.  Nothing has helped.  I cannot open Adobe Reader XI directly from the programs folder.  Nor will it open any PDF file when I double click the file.  I am running WIndows XP.

    Some other things to try...
    Update to Reader version 11.0.5
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • Adobe Reader 8 will not open any pdf files.

    I have a Mac OS X G5. I have Adobe Reader 8 installed. I cannot open any pdf files. It has never worked since installing it. I tried going to File> Open with> Adobe Reader> I get an error that says: the file could not be opened because the file is either not supported or it has been damaged (for example it was sent as an email attachment and wasn't correctly coded). This error occurs no matter where I get the file; email or web page.
    Any thoughts? Thanks.

    I did get around this problem by trashing Reader 8 and confirming that I still had Reader 7.05 installed
    This tip in the MacWorld forum worked for me:
    http://forums.macworld.com/thread/102114
    Now I can open pdf files from the internet or email, in Reader 7.05.

  • Adobe Reader 9 will not open any pdf files

    I am running Windows 7 and use Adobe Reder frequently. Never had a problem. Last week, whenver I try to open a PDF file, I get a warning box "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item."
    The only thng that changed recently was a couple large Windows updates... I am always suspect when a large update occurs. I uninstalled the Reader and Download Manager and ree-installed themm. No change in performance.
    I checked the registry key - it looks correct based on other posts.
    Does anyone have any suggestions what else to try??

    I've got the same problem. I'll look forward to solving this on this thread.
    It really sucks- I have a ton of pdf files, and can't save them to Documents or send them out of the Adobe file.

  • Firefox will not open any pdf files

    FF will not open any pdf files with built in viewer or adobe. I have set applications in all different ways with no luck. PDF works with IE.
    I have ff 33.1.1 and Win 7 and i have tried all suggestions concerning pdf. I even downloaded ff again, uninstalled oldff, and installed new. no luck. all i get is a pop up stating ...download is in progress, please wait.... but it never loads. started after last update. Is ther a way to delete the last update to firefox?
    thanks

    Hello,
    In order to change the default reader for PDF files (to not open PDF files with Firefox's internal PDF reader), follow these steps:
    #Click the menu button [[Image:New Fx Menu]] and click Options (Preferences for Linux and Mac).
    #In the Options (Preferences for Linux and Mac) window, select the ''Applications'' panel.
    #In the ''Search'' field, type ''PDF''. You should find ''Portable Document Format (PDF)''.
    #On the right hand side you should find an ''Action'' column. Use that to select your favorite PDF reader. In order to view PDF files in Firefox, choose ''Preview in Firefox''.
    Did this fix your problems? Please report back to us!
    Thank you.

  • After reloading adobe creative suite cs3 on my mac 10.4.11 acrobat will not open any pdfs it previously opened. help!

    after reloading adobe creative suite cs3 on my mac 10.4.11 acrobat will not open any pdfs it previously opened. help!

    hello.   hey, thanks very much for writing back.  i got some good info with a search or two.  (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs,  OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
    what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro).   Then i deleted a few preference files:
    from User /Preferences/Adobe:
    com.adobe.AdobePremierePro.plist
    com.Adobe.Premiere Pro.5.0.plist
    and from System Preferences:
    the file:  Adobe Premiere Pro Prefs
    and..
    /.../Premiere Pro/5.0/...
    AMEPrefs.xml     (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
    Debug Database.txt
    Placeholder Preset.epr
    PostEncodeCmds.pref
    PresetCache.xml
    Trace Database.txt
    NOTE:
    of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but...  it seems to have worked.
    I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering,  so hopefully i'm good to go.   I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
    hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
    happy editing,
    peace

  • How do i Restore Preview as my default viewer when using Safari,seems adobe has hi jacked Safari,if i uninstall adobe safari will not open any pdf files.

    How do i restore Preview as my default viewer.
    Seems adobe has hi-jacked Safari and and opens using abobe not preview.
    Have uninstalled adobe but safari then will not display any pdf files.
    Preview still works fine to view existing downloaded files.

    Niac --
    What kind of files?  PDFs?  or Others as well?
    If you want Preview to open all PDFs, then find a PDF on your HD.
    Highlight it, and then press the Apple/Comand key along with th letter " i " key.
    When the window comes up, look down to the "Open with" line, and change it from Adobe to Preview.
    Then look slightly below, and select "Change All."
    Now, all PDFs should open with Preview.

  • Adobe 9 worked fine, then just stopped working.  Loaded adobe 11 and it will not open any .pdf files

    Why can't I get Adobe Reader 11 to work at all??  Won't open, repaired via Windows XP as suggested, does not help.  Will not open files in Emails, or stored on the disk. HELP!!!!!

    No, neither vers. 9 nor 11 will do anything by itself, no errors, no nothing, hourglass shows up for about 10-15 seconds, no message, no nothing.  Very frustrating, to say the least.  When you have 11 loaded it says Acrobat failed to load its core .DLL but this is several minutes later.  Can’t find anything relating to that problem.  Any help would be appreciated as I have some very important files that cannot be opened.
    Curtis Jenkins

  • Firefox will not open any pdf links, it doesn't attempt to load the link, and i just get a white screen.

    I cannot open pdf file links. How can I fix this. nothing happens when I click on a pdf link, a new window/tab will open up and it does not attept to load a page, I just get a blank window.

    I had this problem and managed to fix it.
    I went to the "Add-ons Manager" in Firefox then to the "Plugins" tab. I then disabled the Adobe Acrobat plugin and all other pdf plugins. This fixed my problems.

  • Adobe Reader Will not open any Type of PDF

    I resent days I have had to deal with my Adobe Reader X not wanting to open and show any type of PDF's whether it is from a downloaded file to a PDF that is being opened on the web.  It will give me a blank black screen and tells me that adobe reader is unavailable and should be restarted and when I do this is still does not want to open anything.  I have uninstalled and reinstalled every adobe format on my computer and it still will not open a PDF and not I am left to wonder what is going on.  If there anyone else that is having his problem at this time?

    My system is windows 7 32-bit
    Adobe reader X 10.1.3

  • My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good.  I can open on the web site but not from my mac computer

    My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good.  I can open on the web site but not from my mac computer.

    Maybe this: http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html ?
    Do you have a link to that document?

  • Adobe Reader will not open embedded PDFs in Safari with Yosemite

    Adobe Reader will not open embedded PDFs in Safari with Yosemite installed

    That looks like a perfectly good PDF, but since it's trying to open in Microsoft Word, that means your file association for .pdf files is incorrect.  You should change it to point to Adobe Reader instead of Word.
    If you are on Windows, see http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7

  • Reader v11 will not open in Windows Explorer (or browser) when clicking a PDF file; just a flash on the screen.

    Reader v11 will not open in Windows Explorer (or browser) when clicking a PDF file; just a flash on the screen. I can open Reader from Programs then open the file. I'm using a laptop upgraded to Windows 7

    I do no understand "flash on the screen"; could it be http://support.microsoft.com/kb/2716529 ?

  • I have adobe reader 11.0 it will not open a pdf file

    i have adobe reader 11.0 and it will not open a pdf file. what can i do to open  file.

    Can you please send process monitor logs:
    To take process monitor log follow the below steps:
    1) Download process monitor from http://technet.microsoft.com/en-in/sysinternals/bb896645.aspx
    2) Launch process monitor.
    3) Now try to open the PDF file at network share. It will not open with the network error so just cancel the error dialog.
    4) Save process monitor logs as a .pml file.
    5) Send it to me.
    Try above workflows with Protected Mode checkbox checked.
    Thanks,
    Shakti K

  • Downloaded the update for Adobe Reader Xl from 10.  Now the Reader will not open a PDF, if says  " Fatal error - Failed to connet to DDE Serer.

    Downloaded the update for Adobe Reader Xl from 10.  Now the Reader will not open a PDF, if says  " Fatal error - Failed to connet to DDE Serer.  Can anyone provide a solution.
    I cannot find a DDE  file on my windows 7 computer.

    Uninstall Reader. Use Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs to remove all traces of Reader. Download a new copy from http://get.adobe.com/reader/enterprise
    Install.

Maybe you are looking for

  • Objects Creation

    Hi All, I created one string variable with null,and then i assign empty string("") to that variable . for instance String temp = null; temp = ""; temp = ""; for the above statements how many objects will be created . Thanks,

  • Need some useful stuff on SAP BW Process Chain

    Hi all, i am rajendra and beginner is SAP BW. Now i am working in Process chains. can u plz suggest me some useful book, web sites etc etc. on process chains? waiting for ur precious reply. regards rajendra

  • Error "602" System error: AK Datapart too short

    Hi all, Ok, I have looked just about everywhere for an answer to this but to no avail...I even tried under a few rocks we have laying around. Anyway here it is: While running a compression in BW we get Error "602"  System error: AK Datapart too short

  • ABAP code generation

    After a transport was imported successfully into production the program screen did not look the same as in non-production. To correct - the code was regenerated manually. I thought the tp import did this for you? Whan I look at the log I see: Generat

  • New RAM, and getting kernel attacks

    I've bought myself a pair of 4 GB RAM for my Macbook Pro 2011. I bought from another dealer than Apple, but I made sure that the specs matched. But still i keep getting these kernel panics. Any ideas?