Reader X, Windows 7, autofill forms wrong

Reader X, Windows 7, autofill forms wrong
I often use pre made forms at work in Reader X. I have auto complete turned on to basic and save numerical is checked, though I rarely use the same numbers.
I think this started with the an update of Reader a few months ago, but when I am typing in numbers in forms sometimes it will not take what I typed, it overrides it with a previously used item. Sometimes I am trying to enter say, 1214, it will start autofilling other numbers after I type the 2 and if I just keep tying it still takes the autofill number even if I ignore it. The only way to get the correct number is to let it auto fill then go back and correct it and delete the ending characters that it filled in.
I did not create the forms I'm using, they are provided by my state and I cannot modify them.
I searched the web and the forums here and didn't find anything.

I am having the same problem but I don't think it has anything to do with the permissions or account information. This just started out of nowhere a few weeks ago. I tried installing a few older versions of adobe but I either get the same message, "An internal error occurred." or a different error message. I have attached a screenshot of the error message I keep getting. I also tried running the repair options via the control panel but that did not work. I can't change any settings within the program as each time I try to open it I immediately get the error message. I have uninstalled and installed adobe several times and there is no change.

Similar Messages

Can't download Adobe Reader because windows installer has something wrong with it. why?

Why am I getting a message that Adobe Reader won't install or download because something is wrong with windows installer?

Brady&Cam wrote:
something is wrong with windows installer
Is that really the message that Windows gives you?
What is your Windows version? What is your Windows Installer version?

Does Adobe Reader Touch for Windows 8 support forms with auto calculation?

I'm using a preformatted form that contains auto calculations. When I use it on Adobe reader 11 on my laptop, it works. However, when I use the Adobe reader app for windows eight the auto calculations do not work. Is there anything I Can do?

Adobe Reader Touch (Windows Store app with "Modern" UI) does not support JavaScript yet. Thus, auto calculations or field formatting will not work.
If your operating system is Windows 8/8.1 (Pro), not Windows RT, you can install and run Adobe Reader XI (desktop app with classic UI).
If your operating system is Windows RT, you may want to try Microsoft Reader (the built-in PDF viewer by Microsoft) to see if auto calculations work.

Has anybody read the Windows user from an Oracle Form?

Hi
Has anybody read the Windows Login from an Oracle Form?
Regards,
Néstor Boscán

in 6i, u can use d2kwutil
in 9i/10g use webutil. Search in this forum and u can see the previous posting.
Rajesh

Autofill form addon is missing page information to fill profile data

to use autofill form add on you must enter data after selecting the simple icon. I selected the simple icon and no fields are available to fill out your personal data. I am using firefox 3.6.13 on my PC using window 7 Home premium. It was working up until a few days ago.

One word: Templates
For more information, see: page: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_Dev_Templates.80.1.html
Unfortunately, templates don't work with Reader either, unless the document is Reader-enabled with LiveCycle Reader Extensions.

Autofill Form making inappropriate entry into Company fields?

DL's Autofill Forms addon into FF7 on Windows 7. It appears to be working fine except for one aberrant entry. Although I do not have any entries into the "Company" field profile, and I have disabled that field, when filling in a form, my full name appears in the "Company" field.

I'm not sure if Firefox is saving the URL of the page where you enter form data, but merely saves the name (id) of a field and if the same input field name appears on another web page then that data may get offered as a fill suggestion. If a web site uses a common name then you may get that problem.

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

WEB.Show_Document(POP Up Window In 11g forms)

Is it possible to open a Http inside the POP Up Window In 11g forms.
This is what i tried to use:
Created a Dummy Window,dummy Canvas and by clicking the push button i gave this message:
web.show_document('http://www.google.com','Html_Window');
WEB.Show_Document will open only in seperated window but i need to open in the Pop Window is it possible please help on this.

As Denis mentioned, you cannot show html content natively in a form. You would need a bean to do that. However, if you are just trying to create something that looks like a standard browser pop-up window, there are several ways to do it. Be aware however, that in some cases, the following example will not work if you are using an older JRE. The latest JRE is 1.6.0_29 and runs the following code correctly assume the browser is not set to block pop-ups.
EXAMPLE 1:
web.show_document('javascript:window.open ("http://www.oracle.com","myPop","location=no,toolbar=no,menubar=no,status=no,resizable=yes,height=600,width=600");self.close();');
EXAMPLE 2:
Declare
     inJS      varchar2(32767);
Begin
     -- More info about window.open here:
     -- http://www.w3schools.com/jsref/met_win_open.asp
     inJS := 'new_win=window.open("http://www.oracle.com","new_win1","menubar=0,location=0,toolbar=0,status=0,scrollbars=1,resizable=1,width=500,height=600");';
     web.javascript_eval_expr (inJS);
End;

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.
This is very annoying and we need this stopped as we have made no changes to any of the adobe files. Please advise how to do this.
Customer Service DCC

I first tried the version without the deflated stream (so everything uncompressed) against the online repair tool to check/analyse it @ https://www.pdf-tools.com/osa/repair.aspx
And it says no error found, but the reader still want to save it when closing so i still had no clue at this point.
Fortunately, i finally found what was wrong with my generated PDF.
In my xref table, each object reference was not end by a full EOL, i only did put a newline char.
Now i have "carriage return" "newline" which is the full EOL and the reader is happy and close the file silently.
As suspected i did not follow correctly the specs on xref table
Now i'll go and figure what i did wrong with the deflate filter
Thanks for your help.

Generic code to minimize all windows in a form

I want to write a procedure to minimize all windows in a form. This procedure will be called from a menu item.
This can be done by using SET_WINDOW_PROPERTY built-in by hardcoding window names in the form and setting the window state to MINIMIZE.
The requirement is, the code should be generic. So that, if it is called form the menu item, it will do minimizing of all windows in the current form.
Hope no form built-ins are available to get the list of window names in a form.
The requirement can be done by using FORMS The. I doubt it will not work for three tier architecture. Any alternate ways to get a solution?

You can loop through all blocks and items and collect the used window names.

Adobe reader for Windows 8 RT ?

I understand from reading the adobe blog that a version of adobe reader for windows 8 RT (tablets) was released last December however when I go the the adobe store it only shows versions of ipad and android. Am I looking in the wrong place?

Yes. Adobe Reader for Windows 8 Tablets supports both Windows 8 and Windows RT. You can download it from the Windows Store. Bring up the Search charm, select Store, and type "Adobe Reader" to find it.

WUC-24: Error reading URL when running WeubUtil form in Linux

We finally managed to successfully run a form (10g R2) to read from an Excel sheet in the Linux machine.
Now issue is just as the form loads we get this error
WUC-24: Error reading URL
http://192.168.x.xx:7778/forms/webutil/testwebutil.dllJava console gives
ERROR>WUC-24 [URLDownload.pullFile()] Error reading URL http://192.168.2.47:7778/forms/webutil/testwebutil.dllHowever the form is working and the Excel can be uploaded. We just want to get rid of this message.
This error is not even caught by the ON-ERROR error handler it seems???
Any help would be grately appreciated.

Ok. We opened his Java Console and this is what it read. I hope this gives someone a clue in trying to help me resolve this issue?
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\atrobi
Proxy Configuration: no proxy
JAR cache enabled
Location: C:\Documents and Settings\atrobi\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://springfield01:7777/forms/java/frmall_jinit.jar from JAR cache
Loading http://springfield01:7777/forms/java/frmwebutil.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 10.1.2.0
Loading http://springfield01:7777/forms/java/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
2007-Sep-12 16:03:32.727 ERROR>WUC-24 [URLDownload.pullFile()] Error reading URL http://springfield01:7777/forms/webutil/JNIsharedstubs.dll

How to read attachment from adobe interactive form

Hi,
My requirement is- vendor should fill all the detail in an offline interactive form and attach necessary documents in the form itself. How can i read the attachments from the form inside my program and how can i store it in SAP. I am using FM ' SMUM_XML_PARSE' to read all the data in the form.
Best Regards,
Tofan

mailForm
Parameters: bUI, cTo, [cCc], [cBcc], [cSubject], [cMsgBody]
Returns: nothing
This method exports the form data and mails the resulting FDF file as an attachment to all recipients,
with or without user interaction depending on the value of bUI.
If it is set to true then the rest of the parameters are used to seed the compose new message window that is displayed to the user.
If bUI is set to false, the cTo parameter is required and all others are optional.
You must use a semicolon u201C;u201D to separate multiple recipients in cTo, cCc, cBcc parameters.
The length limit for cSubject and cMsgBody is 64k bytes.
Example:
/* This will pop up the compose new message window */
this.mailForm(true);
/* This will send out the mail with the attached FDF file to fun1 @ fun . com and fun2 @ fun . com */
this.mailForm(false, "fun1 @ fun . com; fun2 @ fun . com", "", "", "This is the subject", "This is the body of the mail.");
Note:
This is a Windows-only feature. In addition, the client machine must have its
default mail program configured to be MAPI enabled in order to use this method.
I had to change the code:
instead of this.mailDoc :
var myDoc = event.target;
myDoc.mailDoc(false, "fun1 @ fun . com; fun2 @ fun . com", "", "", "This is the subject", "This is the body of the mail." );
But the outlook new message window still opens...
Any Idea's?
Eran

Read values from Adobe Interactive Form inside the webdynpro

Hello,
I have problems to read the values of the fields inside de adobe. I read an article on saptechincal that told:
You can see the Adobe form that we have designed, enter the data as shown below and press the submit button. (As I said earlier an activex control will be installed on to the client machine, you can see the activex control in the internet explore go to the menu: ToolsàInternet optionsàgo to the programs tab àPress button Manage add-ons.
You can see an activex control named u2018SAP ACFu2019, if you donu2019t have this control you will not see this page: Note you need to have adobe acrobat reader 7.1 installed, I have used version 9, the activex control was not working properly so down graded my adobe reader to 7.1)
This is true ??? I have the Acrobat reader 9.3 and i saw that also have the SAP ACF installed.
The value of the property displaytype on adobe interactive form on webdynpro is activeX or native.
Thank you in advance.

Hi,

Thank you for the answer.

I change the value of the attribute but again i can read anything from the adobe form. So let me explain what i'm doing.

Objective: I have to create one webdynpro with an adobe interactive form for create new clients on r/3 system.

1. I create de the view with 2 elements an interactive form and one submit button.

2. Create the context of the view with the following tree:

> context (node)

 > ADOBE_DATA (node)

 > Clients (from KNA1 table) (node)

 > KUNNR

 > LAND1

 > NAME1

 > ORTO1

 > TELF1

>PDF_SOURCE

3. Complementing the properties of the interactive form:
datasource = clients node of the context
displaytype = native
pdf_source = pdf_source attribute of the context
templatesource = name of the form

4. Create the form, and add the data source to the interface of the form

5. On the form bulider i add and subform on the hierarchy tab and the all the fields of the interface to the form and
automatically the value of the fields are binding.

6.Add a submit button from web dynpro native and add the event click to the button. Then i change the value of the layout type and save e activate the form and the interface

7. The next step is create an action for the button submit for the event "onSubmit". So i create the function and start coding this code:

DATA: adobe_node TYPE REF TO if_wd_context_node,

 client_node TYPE REF TO if_wd_context_node,

 client_element TYPE REF TO if_wd_context_element,

 client TYPE if_create_client=>element_clients.

*Get reference to the adobe_data node from the context

adobe_node = wd_context->get_child_node( name = wd_this->wdctx_adobe_data ).

*Get reference to the clients node from the context

client_node = adobe_node->get_child_node( name = wd_this->wdctx_clients ).

*Get element node

client_element = client_node->get_element( ).

*Get the values from the form

client_element->get_static_attributes(

 IMPORTING

 static_attributes = client ).

8. Then for finalize i add the view to the window and crate a web dynpro application and put one break point on the submit function event.

9. Activate and test the application and when the program try to add a reference to the element node always returning a null reference and the application dumped.

So please help with this situation i can't understand what is the mistake.

PS: Now i have installed the acrobat reader 7.0.8

Edited by: miglsilva on Sep 4, 2010 5:50 PM
Edited by: miglsilva on Sep 4, 2010 6:01 PM

Is there autofill forms for firefox ver 13? I cant get the download to install

I am using firefox ver 13, and I can download autofill forms but it wont install just hangs. Is there a way round this?

Only Mid 2011 or newer Macs running OS X 10.8 (ML) can use AirPlay Mirroring.
Read here > http://support.apple.com/kb/HT5404
Try AirParrot > http://airparrot.com/
Hope that helps

Reader X, Windows 7, autofill forms wrong

Similar Messages

Maybe you are looking for