Readiness check sproxy connection test issue ?

Hi Guys,
we are doing readiness check on the xi system and we went with the TR SPROXY and there we performed connection test as part of readiness check and ran 4 reports.
The last 2 reports SPROX_CHECK_IFR_RESPONSE and SPROX_CHECK_IFR_CONNECTION are not working. The connection to the integration builder works fine.
According to the readiness check document we shld get a ok response when we execute these 2 reports. any help would be really appreciated
Thanks,
srini

Hi Krishna,
we have dev environment and everything is working fine and the results of all the reports are ok. we are building test and during readiness check we have this problem.
we ran the CTC tool on PI 7.0 and we have all RFCs automatically and all are working fine
In dev i have only 1 HTTP connection - ie INTEGRATION_DIRECTORY_HMI. I dont find any other HTTP connections
anyhelp would be really appreciated
Thanks,
srini

Similar Messages

Cache Connectivity Test Issue..:-)

Hi XI Guru's ,
Currently i am working on a scenario JDBC-RFC-JDBC scenario using a BPM.
Issues i am facing....
1. I have made the polling interval from source table to 10 secs, but i can see table is not getting polled in 10 secs.
2. On running Cache Connectivity Test I found that It is not working perfectly : as i can see yellow and red symbols frequently..
3. Sometimes when XI is able to pick the record it is throwing error in Mapping Runtime
"Runtime Exception during application Java mapping com/sap/xi/tf/_MM_REQ_"..
I checked n no of times in Test Mapping it is working fine...
Mapping is between Async Req Object with RFC's import parameters...on drilling down further i figured out that values are not getting passed to this RFC ...as when i passed the constant values to RFC it is working fine...
So i am not sure where the the problem ?
Currently i am working on PI 7.0 and SP 9.0 ...ans also we are not using FQDN now....

Hi Santhosh ,

 on drilling down further i figured out that values are not getting passed to this RFC ...as when i passed the constant values to RFC it is working fine...
On passing the constant values in mapping to RFC the scenario is moving smoothly its only the record being picked by JDBC sender adapter not getting passed to RFC through BPM....
 Yes. You are having issue at Mapping (desing ) side . So, Even if your JDBC Sender picks up the data it won't send to RFC. Obsolutly, your constant value passed to RFC will woks fine .
 So, Have you tested like what i have suggested , like copying the Payload and test the mapping ?
 If you are getting the java.lang.NullPointerException . I am 100% sure your mapping is wrong . Please chek the MAPPING ONCE AGAING !
 Are you getting the Target message structure when you are passing the source etructure ? Executed successfully Message ?
 Please chek the Mapping once again . Test teh Interface Mapping too.
Assing points if you found helpful
Regards.,
V.Rangarajan

Connection Test issue with newly created INTEGRATION_DIRECTORY_HMI in PI7.0

Hi Pals,
Due to change in password for user "PIISUSER" in our system, i changed the login credentials in sm59 -> INTEGRATION_DIRECTORY_HMI.
But the test connection failed, popping up the username/password login dialog again and again.
So i deleted the RFC Connection "INTEGRATION_DIRECTORY_HMI" and recreated it with all the care mentioned in the XI installation guide, manually, step by step.
But again the test connection failed, popping up the username/password login dialog again and again.
I tried this exercise for almost 15 times but without success.
NOTE: I am able to login with "PIISUSER" from SAP system Login successfully.
Looking forward for your kind suggestions.
Thank you!
Saravanan

hi
could be the problem with password..we also faced the same problem while using an alphanumeric one.
after changing to a completely numeric one it started working fine
rgds
Arun

Check the connect to DB & SAP

Hello Guys,
Like R3trans -d for Oracle & SAP.. I wanted to know how to check the connection test for DB2 & sap , Is there any such commend Please let me Know,
Thanks,

Hi,
if u want to connect from R3 to any other SAp system like XI/PI,MDM,etc...
u can create a RFC destination in R3 (SM59) and give d IP and credentials in the columns specified.
After that click on Test connection tab which shows the details of connection like time required.
You can even click on Remote Logon to directly log in to the destination system...
Thus u can check d connection
Reward points if helpful
Menon

Hi I'm having issue to sign in using iPod touch cause it keep showing check network connection as I use wifi.. Can please hel me . Thanks

Hi I'm having issue to sign in using iPod touch cause it keep showing check network connection as I use wifi.. Can please hel me . Thanks

Sign in where?
Maybe:
FaceTime, Game Center, Messages: Troubleshooting sign in issues

"Itunes helper is not running" has a red light on under the Support services catergory of device connectivity test during Diagnostics check

When I ran the itunes Diagnostics Test for my new ipad, I had one test result that had a button in front of the test name, which was red.
The test was in the Device Connectivity Tests Portion, under the Support Services Category, Titled " itunes Helper is not running ".
What does this mean and how can I correct this situation, so the itunes helper is running?
Thank you vtdubu

When I ran the itunes Diagnostics Test for my new ipad, I had one test result that had a button in front of the test name, which was red.
The test was in the Device Connectivity Tests Portion, under the Support Services Category, Titled " itunes Helper is not running ".
What does this mean and how can I correct this situation, so the itunes helper is running?
Thank you vtdubu

Power Bi for o365 - Odata connection test worked but "The server encountered an error processing the request. See server logs for more details". Port 8051? Authority\System

We set up the Data Management Gateway and created a new data source (odata to SQL via sqL user)
Did a connection test and it was successful!
Tried the URL (maybe it needs more):
https://ourdomain.hybridproxy.powerbi.com/ODataService/v1.0/odatatest
That resolves to some :8051 port address and then spits out this message:
The server encountered an error processing the request. See server logs for more details.
I checked and the data management gateway is running.
Does that 8051 port need to be opened on our firewall for this server? How can I confirm that is the issue.. I see no event on the server indicating this is the issue?
I am seeing this event:
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'PowerBiTest'. [CLIENT: IP of the Server]

O365,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Outlook 2007 won't connect / Autodiscover issues

Hello Foristas,
I'm stuck ... so I hope someone will point me in the right direction. This is the scenario:
Target: Migrate 2003SBS to EX2013. SBS hat been migrated to 2008R2 AD Server plus EX2010. This went without problems. Outlook and OWA worked just fine. A 2012 AD Server has been added.
EX2013 has been installed on a fresh 2012 Server. Still everything worked. Mailboxes were moved and still everything worked. EX2010 was decomissioned (seemingly in a hurry :-( ) and now users can't connect via Outlook.
Outlook Version (2007) is up to date, OWA works fine. I can't use the external Connectivity Test because I have no access to either external DNS nor Firewallconfiguration. The customer also doesn't need external access.
Internally I have A-Records for
exchsrv.intdom.local
autodiscover.intdom.local
Lookups work fine. I can access https://autodiscover/autodiscover/autodiscover.xml as well as https://autodiscover.intdom.local/.... and exchsrv/autodiscover (I get the invalid request answer)
Certificates are signed by a domain CA, the root certificate is installed and there is no certificate warning when accessing OWA (or EWS, for that matter).
When trying to connect Outlook, I get that "no connection to Exchange - outlook ha to be online" error (like many others ...). When trying to create a new profile, Outlook barfs at "logging on to server" (wording might be different, I'm
on a german system).
I've double-checked that AutoDiscoverInternalURI is correct (it's autodiscover.intdom.local/autodiscover/autodiscover.xml) as well as AutodiscoverVirtualDirectory InternalUrl is set and correct.
Now here is what is really strange: Out of despair, I just clicked "repair account" and I was able to connect. Once. I could send Mails and receive internally. After restarting Outlook, it was and stayed disconnected. But at least I was able to
run the Outlook Autodiscover diagnostics and what I see: Outlook tries lots of autodiscover.EXTdom.com URIs, but net even tries the internal one. So for testing, I created a host entry on the client pointing autodiscover.EXTdom.com to the internal IP of the
Exchange-Server. I created a new profile and the ran through the assistant and had a working outlook. Once. After restarting, Outlook was disconnected again andcreating a new profile doesn't help. I've recreated that scenario and I'm able to create a working
profile just once and it will only work for the first start.
With the host entry present, when I open https://autodiscover.EXTdom.com/aut.... , a login prompt appears ...
I suspect something fishy in the AD, but I have no more ideas where to look after trying to track that down since yesterday morning.
Any help would be greatly appreciated!
Chris

Hi,
Glad that you have resolved the connectivity issue.
According to your description, there is something wrong with your OAB. And I recommend the following articles which can help you troubleshoot the OAB issue:
http://blogs.technet.com/b/exchange/archive/2012/10/26/oab-in-exchange-server-2013.aspx
http://msexchangeguru.com/2013/12/04/e2013-oab/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

Connection test to database failed: could not connect to server

I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.

I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks!

PI : unable to connect to IR with cache connectivity test via RWB

Hi,
Please help to resolve the issues.
Server Details: SAP PI 7.0, SUNSOLARIS with DB2.
PI server was working fine without any issues for the past 2 weeks, Unfortunately issue is the connection failure.
PI services were unable to interlink internally.
cache connection Test Error Below:
Connection to system null using application null lost. Detailed information: Error accessing "http://sap-02.aig.com:50000/rep/conntest/int?" with user "PIRWBUSER". Response code is 404, response message is "Not Found"
SLDCHECK done with success,SPROXY no issues,
users are not locked & password not changed.
Thanks,
Bala

After full cache refresh. with SXI_CACHE i got cache error "UPDATE" detail error as below.
com.sap.aii.ib.server.abapcache.CacheRefreshException: Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://sap-02.aig.com:50000/rep/hmi_service_swc_manager/int?container=any" with user "PIDIRUSER". Response code is 404, response message is "Not Found"
     at com.sap.aii.ibdir.server.abapcache.content.CacheSwc.addContent(CacheSwc.java:63)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:360)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:324)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.processHTTPRequest(CacheRefreshRequest.java:145)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.handleHTTPRequest(CacheRefreshRequest.java:103)
     at com.sap.aii.ibdir.web.abapcache.HmiMethod_CacheRefresh.process(HmiMethod_CacheRefresh.java:67)
     at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
     at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
     at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
     at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl1_0.process(HmisLocalLocalObjectImpl1_0.java:144)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
     at com.sap.aii.utilxi.hmis.web.workers.HmisExternalClient.doWork(HmisExternalClient.java:75)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doGet(HmisServletImpl.java:640)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

System Configuration - SAP Web AS Connection - connection tests error

hi
I have a SAP ECC 6.04 and sap portal 7.01
When I entered in option System Administration / System Configuration / System Landscape / Portal Content Tree / Systems / SAP_ECC (System created by me)
I founded the following error (in SAP Web AS Connection / Tests the connection to an SAP Web Application Server )
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (htc-svr-erp.humantech.es:4200)
5. The host name htc-svr-erp.humantech.es was resolved successfully.
6. The Web AS ping service http://htc-svr-erp.humantech.es:4200/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://htc-svr-erp.humantech.es:4200 was not obtained successfully; this might be due to a closed port on the Firewall.
...also see a red "X" near a title SAP Web AS Connection
I have other system (old system). It dont have the last error, I show the properties of the "old system"(without error) and the "new system" (with error) for your analisys
In "old sap system", stack java + abap
http://img830.imageshack.us/img830/9755/oldsysstack.jpg
In "new sap system", stack java separated abap
http://img97.imageshack.us/img97/8627/newsysstack.png
In Portal
In "old system", I created "SAP_HCM" System
In "new system", I created "SAP_ECC" System
The "Connector" view (Object Option)
http://img706.imageshack.us/img706/3776/oldsysconnector.jpg (Old System)
http://img269.imageshack.us/img269/914/newsysconnector.jpg (New System)
*The "Internet Transaction Server (ITS)" view (Object Option)
http://img824.imageshack.us/img824/5043/oldsysits.jpg (Old System)
http://img822.imageshack.us/img822/1314/newsysits.jpg (New System)
The "User Management" View (Object Option)
http://img20.imageshack.us/img20/8646/oldsysuserman.jpg (Old System)
http://img97.imageshack.us/img97/5339/newsysuserman.jpg (New System)
The "Web Application Server" View (Object Option)
http://img101.imageshack.us/img101/6155/oldsyswas.jpg (Old System)
http://img69.imageshack.us/img69/434/newsyswas.jpg (New System)
My question of this view is: Is correct the Server port "4200" in New System? or Is correct the Server port "80+instance" in Old System?
I run tcode RZ10 in backend after "Extended Maintenance"
http://img15.imageshack.us/img15/8711/oldsysrz10.jpg (Old System) (Here do not exist parameter icm/server_port_1 )
http://img512.imageshack.us/img512/9268/newsysrz10.jpg (New System) (Here do not exist parameter icm/HTTP/j2ee_0 , is it correct?)
Which of these two syntax is correct? 80 + instance or 4200 (any number of port)
also in SAP Systems, I run tcode SICF and enter in "Port Information"
http://img265.imageshack.us/img265/5281/oldsysport.jpg (Old System) (two ports)
http://img441.imageshack.us/img441/7905/newsysport.jpg (New System) (three ports)
The "Information" view (Object Option)
http://img13.imageshack.us/img13/2012/oldsysinfo.jpg (Old System)
http://img714.imageshack.us/img714/6941/newsysinfo.jpg (New System)
My question is, Why in "Old System" the parameter "Created By" is "pcd_service"? is automatic?
because the paremeter "Created by" is the user j2ee admin , I created the system manually or Should the user create pcd_service ?
The "No Category" group (Object Option)
http://img827.imageshack.us/img827/8215/oldsysnoncat.jpg (Old System)
http://img193.imageshack.us/img193/3800/newsysnoncat.jpg (New System) (in this System does not exist the parameter sysnr , is it correct?)
The "Permisions" Option
http://img825.imageshack.us/img825/886/oldsyspermin.jpg (Old System)
http://img243.imageshack.us/img243/2057/newsyspermin.jpg (New System)
The "Delta Link Tracer" Option
http://img716.imageshack.us/img716/798/oldsysdelta.jpg (Old System) (two levels)
http://img828.imageshack.us/img828/8057/newsysdelta.jpg (New System) (three levels, is it correct?)
the other view the same (Old Sytem and New System)
The "Connection Test" Option
http://img412.imageshack.us/img412/5789/oldsystest.jpg
http://img243.imageshack.us/img243/5237/newsystest.jpg
Edited by: Ivan Quiroz on Sep 21, 2010 12:42 PM

 Excuse me, because the message Editor has problems, I edited with html tags for best view 
 
 hi
 
 I have a SAP ECC 6.04 and sap portal 7.01
 
 When I entered in option System Administration /System Configuration /System Landscape / Portal Content Tree / Systems /SAP_ECC (System created by me)
 
 I founded the following error (in SAP Web AS Connection / Tests the connection to an SAP Web Application Server )
 
 SAP Web AS Connection
 Test Details:
 The test consists of the following steps:
 1. Checks the validity of system ID in the system object.
 2. Checks if the system can be retrieved from the PCD.
 3. Check whether a SAP system is defined in the system object
 4. Validate the following parameters: WAS protocol; WAS host name
 5. Checks if the host name of the server can be resolved.
 6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
 7. Checks HTTP/S connectivity to the defined back-end application
 
 Results
 1. The system ID is valid
 2. The system was retrieved.
 3. The system object represents an SAP system
 4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (htc-svr-erp.humantech.es:4200)
 5. The host name htc-svr-erp.humantech.es was resolved successfully.
 6. The Web AS ping service http://htc-svr-erp.humantech.es:4200/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.*
 7. An HTTP/S connection to http://htc-svr-erp.humantech.es:4200 was not obtained successfully; this might be due to a closed port on the Firewall.

 
 ...also see a red "X" near a title SAP Web AS Connection
 
 I have other system (old system). It dont have the last error, I show the properties of the "old system"(without error) and the "new system" (with error) for your analisys
 
 In "old sap system", stack java + abap
 
 <a href=http://img830.imageshack.us/img830/9755/oldsysstack.jpg>Stack Java + Abap<a>
 
 In "new sap system", stack java separated abap
 
 <a href=http://img97.imageshack.us/img97/8627/newsysstack.png>Stack Java and Stack Abap</a>
 
 In Portal
 
 In "old system", I created "SAP_HCM" System
 In "new system", I created "SAP_ECC" System
 
 The "Connector" view (Object Option)
 
 <a href=http://img706.imageshack.us/img706/3776/oldsysconnector.jpg> (Old System)</a>
 <a href=http://img269.imageshack.us/img269/914/newsysconnector.jpg> (New System)</a>
 
 The "Internet Transaction Server (ITS)" view (Object Option)
 
 <a href=http://img824.imageshack.us/img824/5043/oldsysits.jpg> (Old System) </a>
 <a href=http://img822.imageshack.us/img822/1314/newsysits.jpg> (New System) </a>
 
 The "User Management" View (Object Option)
 
 <a href=http://img20.imageshack.us/img20/8646/oldsysuserman.jpg> (Old System) </a>
 <a href=http://img97.imageshack.us/img97/5339/newsysuserman.jpg> (New System) </a>
 
 The "Web Application Server" View (Object Option)
 
 <a href=http://img101.imageshack.us/img101/6155/oldsyswas.jpg> (Old System) </a>
 <a href=http://img69.imageshack.us/img69/434/newsyswas.jpg> (New System) </a>
 
 My question of this view is: Is correct the Server port "4200" in New System? or Is correct the Server port "80+instance" in Old System?
 
 I run tcode RZ10 in backend after "Extended Maintenance"
 
 <a href=http://img15.imageshack.us/img15/8711/oldsysrz10.jpg> (Old System) (Here do not exist parameter icm/server_port_1 )</a>
 <a href=http://img512.imageshack.us/img512/9268/newsysrz10.jpg> (New System) (Here do not exist parameter icm/HTTP/j2ee_0 , is it correct?)</a>
 
 Which of these two syntax is correct? 80 + instance or 4200 (any number of port)
 
 also in SAP Systems, I run tcode SICF and enter in "Port Information"
 
 <a href=http://img265.imageshack.us/img265/5281/oldsysport.jpg> (Old System) (two ports) </a>
 <a href=http://img441.imageshack.us/img441/7905/newsysport.jpg> (New System) (three ports) </a>
 
 The "Information" view (Object Option)
 
 <a href=http://img13.imageshack.us/img13/2012/oldsysinfo.jpg> (Old System) </a>
 <a href=http://img714.imageshack.us/img714/6941/newsysinfo.jpg> (New System) </a>
 
 My question is, Why in "Old System" the parameter "Created By" is "pcd_service"? is automatic?
because the paremeter "Created by" is the user j2ee admin , I created the system manually or Should the user create pcd_service?
 
 The "No Category" group (Object Option)
 
 <a href=http://img827.imageshack.us/img827/8215/oldsysnoncat.jpg> (Old System)</a>
 <a href=http://img193.imageshack.us/img193/3800/newsysnoncat.jpg> (New System) (in this System does not exist the parameter sysnr , is it correct?) </a>
 
 The "Permisions" Option
 
 <a href=http://img825.imageshack.us/img825/886/oldsyspermin.jpg> (Old System) </a>
 <a href=http://img243.imageshack.us/img243/2057/newsyspermin.jpg> (New System) </a>
 
 The "Delta Link Tracer" Option
 
 <a href=http://img716.imageshack.us/img716/798/oldsysdelta.jpg>(Old System) (two levels) </a>
 <a href=http://img828.imageshack.us/img828/8057/newsysdelta.jpg> (New System) (three levels, is it correct?) </a>
 
 the "System Aliases" Option
 
 <a href=http://img265.imageshack.us/img265/7574/oldsysalias.jpg> (Old System) </a>
 <a href=http://img256.imageshack.us/img256/9817/newsysalias.jpg> (New System) </a>
 
 The "Connection Test" Option
 
 I based in <a href= http://img64.imageshack.us/img64/6638/essalias.jpg> ESS SAP Documentation </a>
 
 In the seven point is diference (blue box) in the <a href=http://img412.imageshack.us/img412/5789/oldsystest.jpg> (Old System) (SAP_HCM System) (An HTTP/S connection to http://htc-svr-sap.humantech.es:8004 was obtained successfully.) </a> and <a href=http://img243.imageshack.us/img243/5237/newsystest.jpg> (New System) (SAP_ECC System) (An HTTP/S connection to http://htc-svr-sap.humantech.es:8004 was obtained successfully.)</a>
 
 I desactivated Firewall in my SAP Server and reviewed in <a href=https://forums.sdn.sap.com/thread.jspa?threadID=946905>SAP Forums </a> my problem but nothing
 
 Could This error also could be the problem that I get an error in the JCO Destination?
 
 <a href=http://img819.imageshack.us/img819/826/oldsysjcosso.jpg>(Old System) (Succesfully)</a>
 <a href= http://img822.imageshack.us/img822/4226/newsysjcosso.jpg>(New System) (com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Issuer of SSO ticket is not authorized)</a>
 
 because I configure SSO correctly (I configured last year SSO in "Old System"),I run tcode SSO2
 
 <a href=http://img709.imageshack.us/img709/7194/oldsyssso2.jpg>(Old System)SSO2 Tcode</a>
 <a href=http://img830.imageshack.us/img830/9704/newsyssso2.jpg>(New System)SSO Tcode</a>
 
 <a href=http://img185.imageshack.us/img185/9279/newsyssso22.jpg>(Old System) SSO2 Tcode Details</a>
 <a href=http://img227.imageshack.us/img227/416/oldsyssso22.jpg>(New System) SSO2 Tcode Details</a>
 
 <a href=http://img530.imageshack.us/img530/8710/newsyslog.jpg>(New System) In the SAP Logs: *** J2EE_ADM_DA1 | USERMAPPING.USE | USER.R3_DATASOURCE.J2EE_ADM_DA1 | | systemtype=[(none)], system=["UMESystemLandscapeDummy"], uses strong encryption=[false], remote user ID=[(none)] ***
</a>

Readiness Checks fail with "The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."

There's another thread about this issue but the accepted answer actually has nothing at all to do with the original problem/question so that's a bit deceptive.
Anyway, when trying to install Exchange 2013 SP1 (on 2012 R2 Datacentre) the installation reaches the Configuring Prerequisites part of the Readiness Checks and then fails out with the message:
The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.
I honestly can't find any way around this issue and the only mentions I've seen resulted in people reinstalling Windows which obviously isn't really a resolution to the problem.
Is there any known fix for this issue?

Ok well I've managed to get around that now by recreating a few registry keys and documented that here (apparently I'm not allowed to create links so can't put that here).
I have a new issue now though. It seemed to get almost all the way through the installation process but is now failing due to a "memory" issue although due to the wording I can't tell whether it means RAM or Disk space. Either way, neither should
apply. The drive has 80GB of space available and the machine has 8GB of RAM (only 2GB in use at the time the installer was ran and the amount didn't drop).
The exact error is...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
$FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
$FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
Write-ExchangeSetupLog -Info "Loading FipFs snapin";
Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
# Copy Microsoft Engine to Engines folder during the install
$FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
$MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
$MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
$MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
if(! $MicrosoftEngineExists)
Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
" was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
$FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
$FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
Write-ExchangeSetupLog -Info "Loading FipFs snapin";
Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
# Copy Microsoft Engine to Engines folder during the install
$FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
$MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
$MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
$MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
if(! $MicrosoftEngineExists)
Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
" was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
So if it's not the drive (there's only one drive in the machine) or RAM then what exactly has it ran out of?

Error in SAP Web AS Connection Test

Connection Test for Connectors is successful
But
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (semdev.suzlon.com:8000)
5. The host name semdev.suzlon.com was resolved successfully.
6. The server semdev.suzlon.com could not be pinged successfully.
What culd be the pblm ?

Hi PK,
in R/3 go to SE37 and check the FM RSBB_URL_PREFIX_GET it will show the details for WAS, I believe the details you gave for WAS are fine.
Now for the issue go to T.Code SICF navigate to the webas path and activate the ping service. This will resolve the issue.
Hope This helps.
Cheers-
Pramod
Reward points if Helpful.

SPROXY related testing process

After configuring the ABAP Proxy with SPROXY transaction what is the testing procedure for the connectivity with XI.

Hi,
As I had already mentioned in one of your previous post, use below reports to execute and check the status of ABAP Proxy.
SPROXY -> Goto -> Test Connection Here you will get the list of reports including below reports. Execute these reports to confirm about ABAP Proxy configuration
SPROX_CHECK_IFR_RESPONSE, SPROX_CHECK_IFR_CONNECTION
Thanks
swarup

SPROXY CONNECTION

Does someone out there have detailed steps for getting SPROXY to communicate with the integration builder. We have both WAS6.40 SRM system and WAS6.20 with 6.4 kernal R/3 system. The online docs stink in regard to this.
I ran the connection test,
Put is http://nero.corp.bcm.tmc.edu:52100/rep(same as the exchange profile value the XI server uses to connect in SPROXY) in the SPROXSET table via the program.
HTTP is functioning
Then when I run IFR Response, the data is not inderstood.
Any ideas?
Chris

Here is what we went through, hope this helps!
First, if the back-end system is WAS 6.20, you need to implement not OSS #439915. This involves installing APPINT_620 addin, that will allow connectivity to the integration server for proxies. EVEN IF YOU ARE ON XI3.0, YOU HAVE TO INSTALL THIS ADD-IN EVEN THOUGH IT IS AN XI2.0 ADD-IN.
Second, use SLD check to ensure that you have connectivity to the SLD. If not, there is an SLDCHECK troubleshooting note available, just search for it.
Third, make sure the following two RFC connections are working on the backend system, this is not my expertise, but your basis person should know how to do this:
1) LCRSAPRFC- type T
   Registered server program
   Program name: LCRSAPRFC_DXI the last 3 chars are our XI
                 box sysid
   Populate gateway host and service
2) SAPSLDAPI- type T
   Registered server program
   Program name: SAPSLDAPI_DXI the last 3 chars are our XI
                 box sysid
   Populate gateway host and service
Finally make sure transaction SLDAPICUST is maintained.
Once we did this, the proxy framework was working

Readiness check sproxy connection test issue ?

Similar Messages

Maybe you are looking for