Reading 7D Mark II files
Lightroom seems unable to read the Canon 7D Mark II files. Any fix?
Native Lightroom support for the D750 was added in the Lightroom 5.7 update released this evening.
Release details:
Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html
Camera Raw 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a vailable.html
Similar Messages
-
Communication Channel marked all files as being read on FTP
The Mailbox FTP has all the files flagged as being read when a single file is read through a communication channel. I manually unflagged the status field so all files had a status of N so none were pulled. I had 14 files for this test flagged as N. I turned off all our CCu2019s. I activated one that was pulling the last file in the list based on the Service Ref# which is unique file name. I refreshed the dir of the FTP several times as the CC was running. One by one as the flag was changed to Y (file read) from top to bottom. It only took a second for each one until it got to three very large files and the status stopped while it was reading the file. After a minute it continued to change the flag until it read the last one. All 14 files on the ftp now had the status flag changed to Y. It appears it actually read the file content one by one and set the flag until it was done. Do you have any ideas why it would do this? From a dos prompt I donu2019t have any of these issues so Iu2019m guessing itu2019s something unique in the SAP FTP adapter that is doing it?
From a dos prompt I can successfully do a get 003520827870964903 c:data.txt and it will only update that ST flag for that one file as being read. I can also do a get %EDT39A22%W_Z1JI4960 c:data.txt and it will only flag the four files as being read that have that Mailbox/APRF value. Now I'm trying to get my CC to do the same but no matter what I try it marks all six files as being read. I have in my source directory %EDT39A22%W_Z1JI4960 and * for a file name and this will mark all files as being read when activated. I have entered 003520827870964903 for a file name to further qualify and it still marks all files as being read. It seems to be getting the file I want cause when I view the communication channel monitor it shows the right data in the payload but it always refers to another file for the archive / delete / test option from the processing tab. There are no problems having a CC write a file out using similar parms for Mailbox/APRF, but trying to read a single file using the Service Ref # or a collection of files using a Mailbox/APRF mask seem to update the status for all files as being read. Any suggestions are welcome.
Mailbox ID St APRF SNRF Service Ref. #
CMS N CCR_GRIEF filekh5LhC0000 003520599937481654
CMS N CLAIM_STLMNTS fileza2TBr0004 003520769829611413
EDT39A22 N W_Z1JI4960 ileh3s0e60000 003520827846664146
EDT39A22 N W_Z1JI4960 fileUfXjR 003520827868994913
EDT39A22 N W_Z1JI4960 filePDFfKP0000 003520827870124419
EDT39A22 N W_Z1JI4960 fileQ7RFdR0000 003520827870964903
Edited by: Kenbrown on Jul 28, 2011 9:10 PM
Edited by: Kenbrown on Jul 28, 2011 9:13 PMHave you installed any apps that auto display the emails when they come in? If so the auto read feature may be triggering this, I had a app at one time that showed my emails in the preview window and it made the emails be listed as read... I would check your apps and make sure you are not using something like this unknowingly.
-
Bought a new camera and Photoshop advises me that it can not read my type of file.. Its canon 7d mark 2 and the extension is CR2.
Hi EddieGerdak,
The update is available now.
Release details:
Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html
Camera Raw 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a vailable.html
Regards,
Pete -
My ps5 wont read mark iii files
I need help! My ps cs5 wont read my new camera files, I tried downloading a converter and the converter didn't recognize the files either. Can anyone explain this in an easy step by step way?
Photoshop CS4 will never be able to directly open 5D Mark III images. Adobe stopped adding new camera support to Camera Raw version 5.x long ago. For ultimate integration and convenience you'll need to upgrade to Photoshop CS6.
But you have an alternative: You can download and install the latest DNG Converter software from Adobe. Then you will be able to convert your 5D Mark III images to DNG files, which Photoshop CS4 will be able to open.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5389 (PC)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5388 (Mac)
For reference, the chart at this link shows what versions of software support what cameras:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
This is where you'll find what versions of Camera Raw go with what versions of Photoshop:
http://forums.adobe.com/thread/311515
-Noel -
Write/read image to avi file, VI works incorrectly from the second run
Hi everybody, in my labview I write image from IMAQ USB to avi file and read image from avi file, the VI runs correctly at the first run then after that it goes wrong, I can write/read only one frame and it terminates automatically. Does anybody know why and how to solve this?
Thanks a lot,
HannahWithout seeing your code I can't comment specifically, but if it runs correctly the first time and then stops be looking for something that is not getting reinitialized correctly. Also what exactly do you have to do to get it to work again? Close and reopen the VI? Restart LV? Restart the computer?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Getting repeated values when reading from a text file.
I need to read from a text file. When the token encounters a particular word (command) I need to read the next line and perform some actions. However, this part is working but it is repeating the values again and again until it encounters the next particular word (command). Hope that someone will help me out, as always when I posted a problem in these forums.
SetOperations class - contains the set methods
// Imported packages.========================================================
import java.util.Vector;
import java.util.Iterator;
// Public class SetOperations.===============================================
public class SetOperations
// Instance variables.===================================================
private Vector v = null; // Creates new instance of vector.
protected int memberCount;
// Constructor.==========================================================
public SetOperations()
v = new Vector();
} // end constructor.
// Method isMember.======================================================
* Checks whether the element is already a member of the set.
* @return True if Vector v contains Object member.
public boolean isMember(Object member)
if (member != null) // only if Object member is not null.
return v.contains(member); // returns true if vector already contains member.
else
return false; // returns false if vector does not contain member.
} // end public boolean isMember(Object member).
// Method addMember.=====================================================
* Adds a member to the set.
* @return Adds Object member to Vector v.
public void addMember(Object member)
//if (! v.contains(member)) // only if element is not already a member.
if (isMember(member) == false) // only if element is not already a member.
v.add(member); // adds a member.
} // end public void addMember(Object member).
// Method countMember.===================================================
* Returns the number of members present in the vector.
* @return Number of elements present in the vector.
public int countMember()
return v.size();
} // end public int countMember().
// Method isSetEmpty.====================================================
* Returns true if set is empty.
* @return True if no elements are present in Vector v.
public boolean isSetEmpty()
return v.size() == 0; // returns 0 if no elements are present in the vector.
} // end of public boolean isSetEmpty().
// Method printMember.===================================================
* Displays member/s of the set.
* @return Prints element/s present in the vector.
public void printMember()
for (int i = 0; i < v.size(); i++) // iterates through present members.
System.out.println("[" + i + "] " + v.get(i)); // displays member/s present in the vector.
} // end of public void printMember().
} // end public class SetOperations.
SetTextLauncher class - reads from a text file and implements the set operations
// Imported packages.========================================================
import java.util.*;
import java.io.*;
// Public class SetTestLauncher.=============================================
public class SetTestLauncher
// Main method public static void main(String args[]).===================
public static void main(String args[])
displayFile("test.txt"); // outputs result from text file.
// method to display a file on screen
public static void displayFile (String textFile)
// Instance variables.===============================================
// Creates new instances of SetOperations.
SetOperations setA = new SetOperations();
SetOperations setB = new SetOperations();
SetOperations setC = new SetOperations();
SetOperations setD = new SetOperations();
SetOperations setE = new SetOperations();
// Initialisation.
String line = "", nextLine = "";
FileReader fr = null;
try
// Opens the file with the FileReader data sink stream.
fr = new FileReader(textFile);
// Converts the FileReader input stream with the BufferedReader processing stream.
BufferedReader br = new BufferedReader(fr);
// Iterates through text file reading lines until end of text lines.
while (line != null)
line = br.readLine(); // reads one line at a time.
if(line == null) break; // when the line is null break the loop.
// Creates a new instace of StringTokenizer.
StringTokenizer st = new StringTokenizer(line);
// Loops until there are no more tokens.
while (st.hasMoreTokens())
String token = st.nextToken(); // reads next token.
// Only if the token encounters the String "membera".
if(token.equals("membera"))
nextLine = br.readLine(); // gets next line.
setA.addMember(nextLine); // adds a member to the set.
// Displays members present in the set if vector is not empty.
if (! setA.isSetEmpty())
setA.printMember(); // print members present.
// Displays the number of member/s present in the vector.
System.out.println("Number of set members: " + setA.countMember());
// Catches and displays exceptions.
catch (FileNotFoundException exp)
System.out.println(exp.getMessage());
exp.printStackTrace();
catch (IOException exp)
System.out.println(exp.getMessage());
exp.printStackTrace();
finally
try
// if file is found
if (fr != null)
// close file
fr.close();
catch (IOException exp)
exp.printStackTrace();
} // end public static void main(String args[]).
} // end public class SetTestLauncher.Thanks for your interest. Please ignore SetOperations class, it is just the class containing the methods and it works correctly since I checked it without reading from a text file. I marked the part where I think lies my problem in class SetTestOperations.
The information in the text file is as follows:
membera
Hillman
membera
Skoda
membera
Honda
membera
Toyota
and the result is:
[0] Hillman
Number of set members: 1
[0] Hillman
[1] Skoda
Number of set members: 2
[0] Hillman
[1] Skoda
[2] Honda
Number of set members: 3
[0] Hillman
[1] Skoda
[2] Honda
[3] Toyota
Number of set members: 4
instead of just one set:
[0] Hillman
[1] Skoda
[2] Honda
[3] Toyota
Number of set members: 4
Hope it is easier to understand like this.
Regards
Marco
I need to read from a text file. When the token
encounters a particular word (command) I need to read
the next line and perform some actions. However, this
part is working but it is repeating the values again
and again until it encounters the next particular
word (command). Hope that someone will help me out,
as always when I posted a problem in these forums.
SetOperations class - contains the set
methods
// Imported
packages.=============================================
===========
import java.util.Vector;
import java.util.Iterator;
// Public class
SetOperations.========================================
=======
public class SetOperations
// Instance
e
variables.============================================
=======
private Vector v = null; // Creates new instance of
f vector.
protected int memberCount;
Constructor.==========================================
================
public SetOperations()
v = new Vector();
} // end constructor.
// Method
d
isMember.=============================================
=========
* Checks whether the element is already a member of
f the set.
* @return True if Vector v contains Object member.
public boolean isMember(Object member)
if (member != null) // only if Object member is not
ot null.
return v.contains(member); // returns true if
if vector already contains member.
else
return false; // returns false if vector does not
not contain member.
} // end public boolean isMember(Object member).
// Method
d
addMember.============================================
=========
* Adds a member to the set.
* @return Adds Object member to Vector v.
public void addMember(Object member)
//if (! v.contains(member)) // only if element is
is not already a member.
if (isMember(member) == false) // only if element
nt is not already a member.
v.add(member); // adds a member.
} // end public void addMember(Object member).
// Method
d
countMember.==========================================
=========
* Returns the number of members present in the
e vector.
* @return Number of elements present in the vector.
public int countMember()
return v.size();
} // end public int countMember().
// Method
d
isSetEmpty.===========================================
=========
* Returns true if set is empty.
* @return True if no elements are present in Vector
r v.
public boolean isSetEmpty()
return v.size() == 0; // returns 0 if no elements
ts are present in the vector.
} // end of public boolean isSetEmpty().
// Method
d
printMember.==========================================
=========
* Displays member/s of the set.
* @return Prints element/s present in the vector.
public void printMember()
for (int i = 0; i < v.size(); i++) // iterates
es through present members.
System.out.println("[" + i + "] " + v.get(i)); //
// displays member/s present in the vector.
} // end of public void printMember().
} // end public class SetOperations.
SetTextLauncher class - reads from a text file
and implements the set operations
// Imported
packages.=============================================
===========
import java.util.*;
import java.io.*;
// Public class
SetTestLauncher.======================================
=======
public class SetTestLauncher
// Main method public static void main(String
g args[]).===================
public static void main(String args[])
displayFile("test.txt"); // outputs result from
om text file.
// method to display a file on screen
public static void displayFile (String textFile)
// Instance
ce
variables.============================================
===
// Creates new instances of SetOperations.
SetOperations setA = new SetOperations();
// Initialisation.
String line = "", nextLine = "";
FileReader fr = null;
try
// Opens the file with the FileReader data sink
ink stream.
fr = new FileReader(textFile);
// Converts the FileReader input stream with the
the BufferedReader processing stream.
BufferedReader br = new BufferedReader(fr);
// Iterates through text file reading lines until
til end of text lines.
while (line != null)
line = br.readLine(); // reads one line at a
at a time.
if(line == null) break; // when the line is null
null break the loop.
// Creates a new instace of StringTokenizer.
StringTokenizer st = new StringTokenizer(line);
// Loops until there are no more tokens.
while (st.hasMoreTokens())
String token = st.nextToken(); // reads next
next token.
// Only if the token encounters the String
tring "membera".
if(token.equals("membera"))
// *****THE PROBLEM LIES HERE....I GUESS
// need to read the next line after encountering the word membera in text file
nextLine = br.readLine(); // gets next line.
setA.addMember(nextLine); // adds a member to
ber to the set.
// Displays members present in the set if
set if vector is not empty.
if (! setA.isSetEmpty())
setA.printMember(); // print members present.
// Displays the number of member/s present in
ent in the vector.
System.out.println("Number of set members: " +
s: " + setA.countMember());
// Catches and displays exceptions.
catch (FileNotFoundException exp)
System.out.println(exp.getMessage());
exp.printStackTrace();
catch (IOException exp)
System.out.println(exp.getMessage());
exp.printStackTrace();
finally
try
// if file is found
if (fr != null)
// close file
fr.close();
catch (IOException exp)
exp.printStackTrace();
} // end public static void main(String args[]).
} // end public class SetTestLauncher. -
Hello everyone,
I’ve been assigned one requirement wherein I would like to read around 50 CSV files from a specified folder.
In step 1 I would like to create schema for this files, meaning take the CSV file one by one and create SQL table for it, if it does not exist at destination.
In step 2 I would like to append the data of these 50 CSV files into respective table.
In step 3 I would like to purge data older than a given date.
Please note, the data in these CSV files would be very bulky, I would like to know the best way to insert bulky data into SQL table.
Also, in some of the CSV files, there will be 4 rows at the top of the file which have the header details/header rows.
According to my knowledge I would be asked to implement this on SSIS 2008 but I’m not 100% sure for it.
So, please feel free to provide multiple approaches if we can achieve these requirements elegantly in newer versions like SSIS 2012.
Any help would be much appreciated.
Thanks,
Ankit
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.comHello Harry and Aamir,
Thank you for the responses.
@Aamir, thank you for sharing the link, yes I'm going to use Script task to read header columns of CSV files, preparing one SSIS variable which will be having SQL script to create the required table with if exists condition inside script task itself.
I will be having "Execute SQL task" following the script task. And this will create the actual table for a CSV.
Both these components will be inside a for each loop container and execute all 50 CSV files one by one.
Some points to be clarified,
1. In the bunch of these 50 CSV files there will be some exception for which we first need to purge the tables and then insert the data. Meaning for 2 files out of 50, we need to first clean the tables and then perform data insert, while for the rest 48
files, they should be appended on daily basis.
Can you please advise what is the best way to achieve this requirement? Where should we configure such exceptional cases for the package?
2. For some of the CSV files we would be having more than one file with the same name. Like out of 50 the 2nd file is divided into 10 different CSV files. so in total we're having 60 files wherein the 10 out of 60 have repeated file names. How can we manage
this criteria within the same loop, do we need to do one more for each looping inside the parent one, what is the best way to achieve this requirement?
3. There will be another package, which will be used to purge data for the SQL tables. Meaning unlike the above package, this package will not run on daily basis. At some point we would like these 50 tables to be purged with older than criteria, say remove
data older than 1st Jan 2015. what is the best way to achieve this requirement?
Please know, I'm very new in SSIS world and would like to develop these packages for client using best package development practices.
Any help would be greatly appreciated.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com
1. In the bunch of these 50 CSV files there will be some exception for which we first need to purge the tables and then insert the data. Meaning for 2 files out of 50, we need to first clean the tables and then perform
data insert, while for the rest 48 files, they should be appended on daily basis.
Can you please advise what is the best way to achieve this requirement? Where should we configure such exceptional cases for the package?
How can you identify these files? Is it based on file name or are there some info in the file which indicates
that it required a purge? If yes you can pick this information during file name or file data parsing step and set a boolean variable. Then in control flow have a conditional precedence constraint which will check the boolean variable and if set it will execute
a execte sql task to do the purge (you can use TRUNCATE TABLE or DELETE FROM TableName statements)
2. For some of the CSV files we would be having more than one file with the same name. Like out of 50 the 2nd file is divided into 10 different CSV files. so in total we're having 60 files wherein the 10 out of 60 have
repeated file names. How can we manage this criteria within the same loop, do we need to do one more for each looping inside the parent one, what is the best way to achieve this requirement?
The best way to achieve this is to append a sequential value to filename (may be timestamp) and then process
them in sequence. This can be done prior to main loop so that you can use same loop to process these duplicate filenames also. The best thing would be to use file creation date attribute value so that it gets processed in the right sequence. You can use a
script task to get this for each file as below
http://microsoft-ssis.blogspot.com/2011/03/get-file-properties-with-ssis.html
3. There will be another package, which will be used to purge data for the SQL tables. Meaning unlike the above package, this package will not run on daily basis. At some point we would like these 50 tables to be purged
with older than criteria, say remove data older than 1st Jan 2015. what is the best way to achieve this requirement?
You can use a SQL script for this. Just call a sql procedure
with a single parameter called @Date and then write logic like below
CREATE PROC PurgeTableData
@CutOffDate datetime
AS
DELETE FROM Table1 WHERE DateField < @CutOffDate;
DELETE FROM Table2 WHERE DateField < @CutOffDate;
DELETE FROM Table3 WHERE DateField < @CutOffDate;
GO
@CutOffDate which denote date from which older data have to be purged
You can then schedule this SP in a sql agent job to get executed based on your required frequency
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
CS6/ACR 7.x not recognizing Canon 5d Mark 3 files previously edited in same version. Help?
Why are my previously edited canon 5d mark 3 raw xmp files no longer recognized and all sliders set to zero? I can see the xmp files associated with the raw file in their folder. The files were originally edited in CS6/ACR 7.x -in July 2012 - and recently re-opened in the same CS6/ACR 7.x.
The canon 5d mark 2 files from the same time/event are showing up fine. I have updated everything, but both before and after the update, same issue with the Mark 3 files.
On a side note:
We have found that opening mark 2 files (that were originally edited in CS4 / ACR 5.7) in CS 6 / ACR 7.x and making any changes such as color coding causes all previous xmp information being zero'd out in the mark 2 xmp file. Not sure if this is a symptom of the same problem? Except the difference here is the Mark 3 files have never been touched outside of version CS6/ACR7.x - however the folder which holds both mark 2 & mark 3 files from the same event has been opened in the CS4 / ACR 5.7 window but without touching the files. By opening the folder in CS4 I can see that the Mark 3 files aren't reading and then know this event was originally edited in CS6/ACR 7.x
Specifics:
PS CS6 13.0.4 x64
Mac OSX 10.6.8
Canon 5d Mark 3 Raw files
This is the first time in these circumsances that this issue has presented itself.
Any insight would be much appreciated
Thank you!First check to make sure your view mode in ACR is set to Image Settings, not Camera Raw Defaults. This is accessible as the top item or three in the menu that comes up when you click the little threelines-arrow icon at the right of the tabs title bar, for example to the right of the word Basic.
Otherwise, did you switch your Camera Raw settings location to be the central database instead of XMP files and/or are you on a different computer that might have a different metadata storage location?
Open up one of the XMP files in a text editor, perhaps one that hasn’t had a picture opened for it, recently, yet, and see if you see any non-zero settings. Also take note of the last file creation time. This will help determine if the XMP files, themselves, have been written with ACR defaults or if they are just being ignored.
Also, check the date and timestamps of a CR2 and XMP file that hasn’t been opened, recently, and see if the XMP date/time is before the CR2 date/time. There has been a bug, not sure in LR or PS, where if the XMP file date is BEFORE the raw-file date, then the XMP is ignored so maybe that could be happening. If it is a LR bug, then have the files been edited in LR, which might have ignored the XMP files and the rewritten things with the LR default settings?
If no explanation can be found on your side, can you zip up a raw and its corresponding XMP, preferably one that’s not been looked at, recently, then put them online somewhere like http://www.dropbox.com/ and reply with the public download link, so others can take a look?
What version of Camera Raw are you using? ACXR 7.4 just came out this week. -
Any sample code for an Extractor to read in a flat file?
Hi SAP gurus,
Are there any sample code for an extractor to read in a flat file?
Are there any documentation on custom coding an extractor to dump
information into an info source?
Are there any documentation on the pit falls and contraints using Solution
Manager, the BI tools, particularly on the Info Source?
Thanks,
SteveThanks Muppet Mark
I forgot to mention that I had also tried just fileObject.read() as well and it didn't work either. It was the same run on sentence result I got with the script I showed above. Seems odd. However, the \r instead of \n did the trick. I had some recollection of another line feed character but couldn't remember what it was, so thanks for that.
Doug -
How can I read the printer snapshot file printers.xml
How can I read the printer snapshot file printers.xml
XML files are typically viewed using a web browser.
Open the XML file and the default program should open it automatically. If you are prompted to select a program, use the option that lets you choose a program and brows through the directories for your browser (for example, use Internet Explorer, Firefox, etc.).
If need be, you should be able to right-click the file and select open with to choose the program to open it with.
There are other XML viewers out ther, but web browsers are typically the default as XML is a web language.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Find and Read the Target Spreadsheet File from Target Folder
I'm trying to find and read the target spreadsheet file from the target folder. Please help. Thanks.
Solved!
Go to Solution.If you know the folder, you could do a List Folder Contents to get a list of files in that folder. You can then just use Array Index to get the file you want.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
How to read some images from file system with webdynpro for abap?
Hi,experts,
I want to finish webdynpro for abap program to read some photos from file system. I may make MIMES in the webdynpro component and create photos in the MIMES, but my boss doesn't agree with me using this way. He wish me read these photos from file system.
How to read some images from file system with webdynpro for abap?
Thanks a lot!Hello Tao,
The parameter
icm/HTTP/file_access_<xx>
may help you to access the pictures without any db-access.
The following two links may help you to understand the other possibilities as well.
The threads are covering BSP, but it should be useful for WebDynpro as well.
/people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents
http://help.sap.com/saphelp_sm40/helpdata/de/c4/87153a1a5b4c2de10000000a114084/content.htm
Best regards
Christian -
Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III files. SNo support or upgrade availab
Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III files. SNo support or upgrade available on the site but 6.7 upgrade.!Please advise
http://labs.adobe.com/technologies/cameraraw7-1/
-
Photoshop CS won't read 5.2 DNG files
I recently had a student use the stand alone DNG converter V.5.2 on his Canon 5D Mark II raw files but Photoshop CS won't read the resultant .dng files. Our copy of CS3 reads them ok but he only has CS and neither his version of CS nor ours will read the files. My understanding has been that .dng files can be read by any version of Photoshop that works with Raw files. Is this no longer true? Or was it never true? Thanks.
-dave-Hi Thomas,
Installing 2.4 took care of the problem. Boy, does the CS version of Camera Raw seem crude compared to the full featured version you've given us now. I remember it as being pretty impressive at the time but I sure wouldn't want to have to go back to it. I think I've convinced the student how much he's missing out on by not having CS4 but at least he'll be able to work with his Raw files until he upgrades. Thanks for your help.
-dave- -
Can newer versions of Photoshop Elements still read PE 2.0 files?
Can newer versions of Photoshop Elements still read PE 2.0 files?
Some of the less popular formats, such as JPEG2000 and EPS have since been dropped, but standard JPEGS, TIFFS, PSD, GIF, PNG, BMP, PDF should all open in PSE12. There is a free plug-in if you do have JPEG2000 files that you want to open.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.
Maybe you are looking for
-
How to add sub flyout in a flyout
Hello All, I have added two to three flyouts in my toolbar. Now I want to add a sub -flyout inside a flyout. how to make it , which object i am supposes to use for it. Please help me.
-
I have a computer with windows 8, when I plug in IPOD Touch, get message can't download pictures, no music library appears or icon. Any suggestions?
-
what is GR against inbound delivery , outbound delivery ? pls explain with details
-
.TOD Files/Quicktime/iMovie 08
Ok, I've searched the forums for the answer, and haven't been able to find/understand how people are doing this. I have a Everio GZ-HD3U and haven't changed any of the settings on it. The files, once the Everio_HDD shows up on the desktop, I believe
-
Books Do Not Appear in Shared Libraries
We have set up Home Sharing and can view music, tv shows, movies and audio books from each others' libraries. However, none of our books downloaded to iBooks appear. Any suggestions on what we might be doing wrong?