Reading 90xx configuration switches

Has anyone an example of how to read the configuration switches from the cRIO-90xx controllers. I want to read the status of the USER1 setting but haven't been able to find an example or a way to achieve this.
Thanks
Tony

Hi Tony,
You need to use the RT Read Switch.vi, located on the RT utilities palette. (See screen shot).
Note: You can only read the switch from the RT target, I attach an example RT VI in LV 8.2.1 format.
Regards
JamesC
NIUK and Ireland
Message Edited by JamesC on 05-01-2007 10:11 AM
Attachments:
User1_Switch_State.vi ‏14 KB
User1_Switch_State.PNG ‏100 KB

Similar Messages

  • Airport Utility 5.2 and 5.2.1 cannot read /edit configuration of AEBS 7.2.1

    *THE PROBLEM ON my Mac:*
    I am using an ethernet connection directly to a brand new AEBS from:
    iMac Intel Core 2 Duo, 2BG RAM
    X 10.4.10
    airport turned off
    Airport Utility detects the base station but cannot read the configuration to edit and setup. And displays the following error:
    "An error occurred while reading the configuration.
    Please make sure your AirPort base station is plugged in and in range of your computer or connected via Ethernet and try again. (-5)"
    The AEBS does assign any machine connected via ethernet an IP address to allow internet access.
    *THE PROBLEM ON WINDOWS:*
    I have the nearly the same problem when using my Windows XP pro laptop connected via ethernet using Airport Utility for Windows ver 5.2 and 5.2.1
    Airport Utility detects the base station, but when attempting to access the configuration, the Error message is practically the same with a different error code:
    "An error occurred while trying to access the base station. Make sure your network connection is valid and try again. Error -6742
    *STEPS ATTEMPTED TO REMEDY THE PROBLEM (w/out success):*
    I have read the posts that say to turn off IPv6 on Mac, did that but with no success.
    Others did a simple hard reset on the AEBS, I tried that too.
    I've tried connecting to the AEBS directly with all other network devices (modem, other routers, etc) disconnected and turned off just incase there was some compatibly issue... no work. I even tried all the different ports.
    Any other suggestions would be appreciated. Can I walk into a Apple retail store and ask them to check the the AEBS to see if they can access the configuration?
    Just to be fair...
    (For people who have only read this post, turning off the IPv6 worked for some people, and just doing a hard reset for others).

    I finally figured it out. I had exactly the same problem when Airport Utility detected the base station but could not read the configuration to edit and setup, displaying the following error:
    "An error occurred while reading the configuration.
    Please make sure your AirPort base station is plugged in and in range of your computer or connected via Ethernet and try again. (-5)"
    I tried everything (Unfortuantely it is impossible to consult to an Apple genius around here). Even the hard reset didn't work. That is what I did: I pulled off the power cord, and put it back again WHILE HOLDING DOWN THE RESET BUTTON with a pin. Only after that the amber light went on twinkling, and I could access it via the Airport utility. All the settings were reset so I just had to reconfigure it. Hope it works for you too.

  • "An error occurred while reading the configuration"

    I updated my Time Capsule (1tb, old) with the new software last night (to 7.4.1 from 7.3.2). The upgrade process seemed to work fine. I then tried to go into the TC with Airport Utility 5.4.1 and when I click on the TC, I get a message that says, 'An error occurred while reading the configuration. Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-5). I've rebooted the TC. I have plugged into it directly.
    It now asks me for my password. I type it in and then I get the message. Any suggestions? Downgrade? Re-run the upgrade? Reset the TC?

    foohan,
    I had this same error, and I did have to reset (hold down the reset button for 5 seconds) my AirPort Extreme and Time Capsule to get past it. I noticed two things, though.
    1. If I tried to connect to my Time Capsule from Finder, I got an error. But if I clicked the "Connect As" button, it asked for my password again, and I could get to all of my files to back them up.
    2. All of my files were still on my Time Capsule after I reset it. I use it for remote file storage, not Time Machine, so I can't tell you if Time Machine backups will pick up where they left off.
    Hope this helps.

  • Can't read AExp Configuration- is it dead?

    Hi- had a network with an AEBS connected to the internet and an AExp as a client connected to my stereo for streaming music. All was working perfectly. I moved apartment- renamed network. At the same time I got a new Powerbook so moved from Panther to Tiger.
    The network is fine for internet access, but I the AExp has stopped working. I can see it in AAU, and in iTunes it is an option to select. However:
    1. In iTunes if you select it you get a box trying to connect which gives up after about a minute or two
    2. In AAU it sees it but when you hit configure it waits for a while before coming back and saying it can't read the configuration
    I've tried a factory reset. Was able to rename it, but back to the old problem.
    I've tried to install new firmware- again, same problem- it sees it but can't update the firmware. Have also tried to connect via an ethernet cable to update and configure- but no joy.
    Is it dead? I think I'm within warranty by about two weeks

    This all suggests the problems are being caused by an incorrect network setup - not a defective Airport Express.
    Make sure your cable/DSL modem is cabled to the AEBS ethernet WAN port (the one labelled with the "circle of dots" icon). Some people make the error of connecting the modem to the AEBS LAN port - which won't work properly.
    Also, check the configuration of the AEBS with the Airport Admin Utility - make sure that (under the Network tab) you have checked the boxes to "Distribute IP addresses" and "Share a single IP address using DHCP and NAT".
    When setting up the Airport Express with the Airport Admin Utility, select to set up the Airport Express to "join" an existing wireless network. Do NOT select the option to have the Airport Express "extend" an existing wireless network - unless the intent is to use the Airport Express to increase the wireless range of the AEBS.

  • Can't read airport configuration

    I have an Airport Extreme base station (802.11g), which I use with Airport Utility 5.3.1 on my MacBook Pro (OS X 10.4.11). My internet connection is actually working fine, but when I tried to access the Airport settings because houseguests were having trouble using our wireless network, Airport Utility found the base station but could not read the configuration (error message -6753). I reset Airport, with the same result (except that now I can't rename the network or reset the password, because I cannot access the settings). I have also been unable to download the latest firmware for the same reason. So -- I can use Airport for internet access, but should I ever need to change the settings (as I was trying to do this evening), I'd be out of luck. Any thoughts?

    Try connecting your laptop directly to the AEBS with an ethernet cord (you might have to reset the base station again).

  • Oblix_OBWebGate_AuthnAndAuthz: ..- Unable to read log configuration file.

    Hi All,
    I have a painful problem with Oracle 10g Webgate. I am using Oracle_Access_Manager10_1_4_3_0_linux64_APACHE22_WebGate to procted Apache resource. I have some problem in Custom Authentication plugin. which is not still resolve(https://forums.oracle.com/thread/2549716).   
    Now I have apply patch BP9 (Oracle_Access_Manager10_1_4_3_0_BP09_Patch_linux64_APACHE22_WebGate) for Webgate, Now I have a new issue, I am unable to get the logon page of OAM when I try to access my Apache resource.
    The Error Message in the browser is:
    Internal Server Error
    The server encountered an internal error or misconfiguration and was unable to complete your request.
    Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.
    More information about this error may be available in the server error log.
    Apache/2.2.3 (Oracle) Server at apache.tigerit.com Port 80
    In the error log file of  Apache I have found
    [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    [Sun Jun 23 11:53:20 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    Can Anyone help me regarding this issue...
    Thanks
    Tamim Khan

    Hi Colin,
    Thanks for your help, You are right I have change the permission of /opt/netpoint/webgate/access/oblix/lib/libxmlengine.so.
    Now I am able to access the logon page of the access manager.
    But the problem as I mention in (https://forums.oracle.com/thread/2549716) my ObSSOCookie value is still loggedcontinue.
    My Authentication return (ExecutionStatus.SUCCESS) Successful from the Java Code , and I am unable to login in the application. The thing is I can't manipulate ObSSOCookie from Java code.
    I have apply Patch 12363955 to resolve this issue. But this patch is now to resolve this issue.
    Have you any idea how to resolve this issue.
    Thanks
    Tamim Khan

  • Attaching USB Drive - Can't read AP configuration file, kills internet

    Current network:
    Airport Extreme (Sim Dual-Band)
    Mac Pro (wired Ethernet)
    MacBook Pro (wired or WiFi N)
    MacBook (WiFi N)
    2 x iPhones (WiFi G)
    Airport Extreme in use for several months with no problems. All Macs can read/write it's configuration.
    I hooked up a 1TB My Book USB HD to the Airport Extreme via USB. All three Macs (Mac Pro, MacBook Pro, MacBook) could see and read/write to the new drive. The Airport Extreme appeared in Airport Utility on all three Macs. Wired, WiFi N + G internet continued to work great... however none of the Macs could read the configuration file of the Airport Extreme. If I unplugged the USB drive all the Macs could read and write to the configuration file.
    I plugged the USB drive back in and left it overnight. This morning, everything continued to work, with the exception that none of the computers could read the configuration of the AP.
    Around 10am today the Macs/iPhones could no longer connect to the internet. I disconnected the USB drive and now the internet works again.

    Hey David,
    I know you said you read a lot of posts already and none of the other solutions worked, but just in case, if you haven't already I would run through the steps in here:
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801
    Welcome to Apple Support Communities!
    Have a good one,
    Delgadoh

  • How to read the configuration for SAP GUI elements in Plant Maintenance module from SPRO and leverage the same in NWBC for HTML.

    Dear Members,
    Greetings for the day!
    I am working on NWBC for HTML in Plant Maintenance module.
    We have configured some changes in SPRO for customizing the UI elements( like visibility, mandatory ) like tabs and fields in transactions like IW21( Create Notification).
    As of now separate parallel configuration needs to be carried out in NWBC for HTML in PM module to achieve the same UI features for creating notifications and this is time consuming.
    Is there any way to read the configuration done in SPRO for the SAP GUI's and leverage the same in NWBC for HTML.
    Appreciate your time in responding to this.
    Thanks & Regards,
    Ram.

    >
    <IfModule mod_weblogic.c>
    WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
    MatchExpression /app1
    </IfModule>
    <Location /weblogic>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
    DebugConfigInfo ON
    PathTrim /weblogic
    </Location>
    <IfModule mod_weblogic.c>
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    MatchExpression /app2
    </IfModule>
    <Location /weblogic>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    DebugConfigInfo ON
    PathTrim /weblogic
    </Location>
    >
    This configuration is weird little bit. There is MatchExpression /app1 and MatchExpression /app2 and at the same time two <Location /weblogic> sections. Are you sure you understand what that configuration stands for?
    Try something like this ...
    <Location /app1>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
    DebugConfigInfo ON
    </Location>
    <Location /app2>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    DebugConfigInfo ON
    </Location>
    where /app1 and /app2 are contexts of your weblogic applications.
    http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/apache.html
    http://httpd.apache.org/docs/2.0/mod/core.html#location

  • I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

    I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

    Which Fx version? When you uninstalled Fx, did you <b>reboot</b> computer before reinstall?
    Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
    Is your profile in the default location or custom location?
    Have you tried creating a <u>new, <b>completely</b> clean profile</u> - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
    Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

  • Failed to read the configuration file. Fresh install on windows 7

    I have just downloaded and installed firefox on my windows 7 computer. No errors on the install. When I try to launch Firefox I get this dialog box. Configuration Error - Failed to read the configuration file. Please contact your system
    administrator.

    Check for the presence of a mozilla.cfg file in the Firefox program folder to initialize some prefs.
    This also involves the presence of a .js (JScript) file, probably in "defaults\pref" folder, that specifies to process this mozilla.cfg file.
    If you have .js files apart from the channel-prefs.js file, that sets app.update.channel, in the defaults\pref folder then open this file in an editor like Notepad and please post its content.
    Also please post the content of the mozilla.cfg file.
    There shouldn't be a mozilla.fcg file present unless you've created it yourself to initialize some prefs.
    If you have this mozilla.cfg file then best is to do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
    *http://kb.mozillazine.org/Preferences_not_saved#Other_solutions

  • Outlook 2013 - Read emails keep switching back to Unread

    I have this weird problem with 2013 Outlook client and Exchange 2010 where on random some of read emails will switch back to unread state. Its very annoying specially when you have executives sending you emails and you can't tell if this is a new one or
    one that you read and took action on.
    Company's desktop support folks say that there is nothing wrong with my exchange account. I told them it has to be my account/maillbox or some setting on exchange as this is happening on two different machines. One is a windows 7 pro laptop, the other one
    is windows 7 pro desktop. both 64bit version of windows but 32bit version of outlook/msoffice 2013.
    I only installed outlook on the desktop to see if my outlook on laptop was the culprit. but since both clients are behaving the same way.. it has to be something on the exchange side.
    Appreciate any help I can get.
    Thanks.
     

    Hi Apple,
    The issue could occur if the sync between the Outlook client and OWA is not completed or the Outlook data file in the Outlook client is corrupted, every time when syncing to OWA, it will change the status back to “Unread”. To narrow down the issue, please
    try the steps below:
    Disconnect all the clients connected to the account except OWA.
    Make the message as read in OWA, then check if the status will be changed back.
    If not, open Outlook, then check if  the status will be synced to Outlook.
    If the status changes to unread again in OWA, it could be related to Outlook.
    In addition, you can also try to re-create outlook profile and check if any helps.
    Best regards,
    Niko Cheng
    TechNet Community Support

  • ASDM is unable to read the configuration from ASA.

    Earlier today I was configuring the Cisco ASA (7.2(2)) using the ASDM, but after a reboot of the appliance I now get the following:
    ASDM is unable to read the configuration from ASA.
    This happens shortly after ?Loading running configuration from the device? appears in the ASDM status window.
    I have tried restarting both the appliance and my workstation, but the issue persists. I have also tried clearing the ASDM cache, but that doesn?t help either. The issue occurs whether I used the Cisco ASDM Launcher or the web interface.
    SSH access to the appliance works fine.
    Thanks for any assistance (why is it that Cisco?s GUIs always have issues?!?).

    I have exactly the same issue , SSH works fine but ASDM and Web interface reply with that error message "ASDM is unable to read the configuration from ASA".
    My ASA is a 5520 ver 7.1(2) with ASDM 5.1(2)
    Could it be something related to Java ?
    Thanks for any hint.

  • I have installed Firefox but I keep getting the following message, "Failed to read the configuration file."

    Firefox has stopped working. I have uninstalled it and reinstalled it and it still will not work. It tells me that it installed successfully but when I launch it I get a window that says, "Failed to read the configuration file." and it will not open. Please help.

    Do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

    Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
    I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
    I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

    Which files do you have in the defaults\pref folder in the Firefox program folder?
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    See also "Other solutions":
    *http://kb.mozillazine.org/Preferences_not_saved
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • WebUtil error: WUC-6: Unable to read WebUtil configuration file

    Dear Colleague,
    I received the following error:
    WUC-6: Unable to read WebUtil configuration file
    c:\OraHome_BIForms\forms\server\webutil.cfg
    In the meantime, I have verified that my default.env file contains the following path definition:
    # webutil config file path
    WEBUTIL_CONFIG=C:\OraHome_BIForms\forms\server\webutil.cfg
    What is wrong here? Does "unable to read..." mean that the file security settings do not allow read access to the webutil.cfg file?
    I would appreciate any advice you can give me.
    Thank you and kind regards,
    Randy

    In the meantime, I have figured out the solution to my problem.
    The webutil.cfg file was not in the directory that was being pointed to in the path parameter.
    Regards,
    Randy

Maybe you are looking for