Reading (and searching, use of TOC and index) Acrobat files offline

OK - I have tried several things in effort to read PDFs offline.
The 'tools' that allow me to access these files PDFReader Pro and GoDocs are incapable of doing searches, use TOC, and index.. It is basically a picture of a PDF. They also present it in the linear form where I need to actually scroll the 343 PAGES to get to the information I want to read mid-way into the document.
Is there a realistic tool that actually properly presents PDF files offline and allows it to be used as it was intended? OOPS - correction Safari cant display this right either.... never mind ....
Thanks
Message was edited by: EmbeddedGeek
I removed an erroneous statement that safari can properly display PDFs - it can't provide search, index/toc accesses. Bogus!

On a possibly related note, see http://reviews.cnet.com/8301-13727_7-20004258-263.html?tag=mncol;txt for a way to ADD stuff to the TOC. I'm just passing this along, I haven't tried it.
Doug

Similar Messages

I got the iPhone 4S and I use google calendar and when the Sprint salesperson set up my phone only 2 months of my calendar went on my phone. How do I get my whole calendar to sync on my phone?

I got the iPhone 4s and i use google calendar and when the Sprint sales person set up my phone, only 2 months showed up on my iPhone. How do I sync all of google calendar to my iPhone!

Settings/Mail,Contacts,Calendar - there's a setting for how far back to sync calendars.

Ihave downloaded iCloud to my new PC and am using windows 7 and office 2010. I cannot get iCloud to come up on Outlook with the choices for CalendCar and contacrts, my iMail account is there, but not the general coud choices. What am I doing wrong.

I have downloaded iCloud to my new PC and am using Windows 7 and Offie 2010. I cannot get iCloud to come up on Outlook with the choices for Calendar and Contacts, my iMail accnt is there***.me.com, but not the general Cloud choices for calendar and contacts? What am I doing wrong?

I have I cloud 2.0.2.187 loaded just downloaded yesterday.

How can I copy and paste using 'CTR "C" and "P"?

Hi Guys,
How can I copy and paste using 'CTR "C" and "P"?

Press Command and V instead of Control and P.
(110450)

Is it possible to buy an iPhone 4s unlocked in the US, and then use it normally and completely in France with Freemobile ?

Is it possible to buy an iPhone 4s unlocked in the US, and then use it normally and completely into France with Freemobile (which provides micro-SIM) ?
I'm travelling to NYC tomorrow and that would be 100€ less than in France...

Thank you for the quick answer
Do you mean that I can't reserve and pick up my phone in the local apple store as it's explained on the site (http://www.apple.com/retail/iphone/) ?
What about the social security number asked in the formulary ? I've got a French one...
Puzzled...

I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

If I get my iphone unlocked can I buy a sim card in Spain and then use it there and get free 3g access

If I get my iphone unlocked can I buy a sim card in Spain and then use it there and get free 3g access

No. You can't activate any iPhone without a sim card installed. The sim card itself need not be activated, but it must be valid & present. Since you updated the software, the phone requires re-activation, thus you need a sim card. You can borrow one from someone, but bottom line, you need a sim card.

How can I regain answers feature alt + click for spelling and definition. using windows 7 and 6.0.2

How can I regain answers feature alt + click for spelling and definition. using windows 7 and 6.0.2
I may have lost that feature when I upgraded to 6.0.2
This feature allowed me to rest the mouse over any word, anywhere, press Alt then left clk mouse and it gave spelling and definition of the word.

This did not help.
I already had Answers installed, however, I followed your procedure anyway but it did not give me back the capability:
How can I regain answers feature alt + click for spelling and definition. using windows 7 and 6.0.2
By the way, when I left click, there is a low level, short gong that sounds.

Reading SNMP packet using PL/SQL and XML

Hi,
Is it possible to read the content of a SNMP packet using MIB file converted into XML. I know it's possible to develop a java program which can collect SNMP packets from the network and inserts them into Oracle. The problem after that is how to read the content using MIB library file. It's possible to convert the MIB file into XML file but the problem is to create s PL/SQL block which can read the XML file and based on the content to translate the information from the SNMP packet. Is it possible?
regards
Edited by: user10484841 on Sep 24, 2010 3:15 AM

Thank you for the reply!
I have converted oracle MIB into xml using prtg's import tool. As far as I see prtg also uses xml as you can see below.
So how I can translate string for example 1.3.6.1.2.1.39.1.1.1.1.1111111111 using xml and pl/sql?
Can you give me direction where to start?
<?xml version="1.0" encoding="ISO8859-1" ?>
<oidlist>
<system>
<version>
1
</version>
</system>
<list>
<entry>
<name>
RDBMS-MIB|rdbms db: #[1.3.6.1.2.1.39.1.1.1.1]|rdbms db index
</name>
<oid>
1.3.6.1.2.1.39.1.1.1.1
</oid>
<type>
vmAbsolute
</type>
<kind>
mkTable
</kind>
<unittype>
sutCustom
</unittype>
<units>
</units>
<indicator>
rdbms db index
</indicator>
<scale>
1
</scale>
<multiply>
no
</multiply>
<max>
0
</max>
<usegetnext>
no
</usegetnext>
<is64bit>
no
</is64bit>
<isunsigned>
no
</isunsigned>
<isfloat>
no
</isfloat>
<description>
A numeric index, unique among all the databases from all products on this host. This value is a surrogate for the conceptually unique key, which is {PrivateMibOID, databasename}
</description>
</entry>
<entry>
<name>
RDBMS-MIB|rdbms db info: #[1.3.6.1.2.1.39.1.1.1.3]|rdbms db info size units
</name>
<oid>
1.3.6.1.2.1.39.1.2.1.3
</oid>
<type>
vmAbsolute
</type>
<kind>
mkTable
</kind>
<unittype>
sutCustom
</unittype>
<units>
</units>
<indicator>
rdbms db info size units
</indicator>
<scale>
1
</scale>
<multiply>
no
</multiply>
<max>
0
</max>
<usegetnext>
no
</usegetnext>
<is64bit>
no
</is64bit>
<isunsigned>
no
</isunsigned>
<isfloat>
no
</isfloat>
<description>
Identification of the units used to measure the size of this database in rdbmsDbInfoSizeAllocated and rdbmsDbInfoSizeUsed. bytes(1) indicates ndividual bytes, kbytes(2) indicates units of kilobytes, mbytes(3) indicates units of megabytes, gbytes(4) indicates units of gigabytes, and tbytes(5) indicates units of terabytes. All are binary multiples -- 1K = 1024. If writable, changes here are reflected in the get values of the associated objects.
</description>
</entry>
<entry>
<name>
RDBMS-MIB|rdbms db info: #[1.3.6.1.2.1.39.1.1.1.3]| rdbms db info size allocated
</name>
<oid>
1.3.6.1.2.1.39.1.2.1.4
</oid>
<type>
vmAbsolute
</type>
<kind>
mkTable
</kind>
<unittype>
sutCustom
</unittype>
<units>
</units>
<indicator>
rdbms db info size allocated
</indicator>
<scale>
1
</scale>
<multiply>
no
</multiply>
<max>
0
</max>
<usegetnext>
no
</usegetnext>
<is64bit>
no
</is64bit>
<isunsigned>
no
</isunsigned>
<isfloat>
no
</isfloat>
<description>
The estimated size of this database (in rdbmsDbInfoSizeUnits), which is the disk space that has been allocated to it and is no longer available to sers on this host. rdbmsDbInfoSize does not necessarily indicate the amount of space actually in use for database data. Some databases may support extending allocated size, and others may not. Note that a compliant agent does not need to allow write access to this object.
</description>
</entry>
</list>
</oidlist>
*Note that the xml file is not full die to 30000 character restriction of oracle's forum
regards
Edited by: user10484841 on Oct 19, 2010 6:07 PM
Edited by: user10484841 on Oct 19, 2010 6:07 PM

Help!! I recently erased my settings and after backing up via iCloud, I cannot open some apps. They look as if they are updating, but I cannot delete them. I can open them if I go through the app store and search for the app and click "open." what do I do

I can't seem to figure out why I can't delete and redownload my apps. I'm very confused. I've tried turning my phone on and off, and doing a soft reset.

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

How to store photo's on external drive and still use Time Machine and secondary back up plan

So, My Macbook Pro is now going on 4 years old and I've accumulated around 15,000 photos in iPhoto now. I would like to move everything (or at least everything older than 12 months) onto a portable external drive, but i'm not sure the best way to do this and still keep a good back up plan. My current process is the following -- I have external HD same size as my current internal drive on the MBP, which is formatted that i use Time Machine. I also have a paid subscription to Crash Plan online cloud back up that is connected to my laptop drive (CrashPlan is constant and easy, so I just USB plug in MBP to EHD a few times a month and that's it). If I were to move most of my picture/video's/important docs to an external drive, how would I back that up with Time Machine, and if I did, how would I back up my laptop drive with Time Machine also, and what drive would I assign my Crash Plan online account too? Cant seem to wrap my brain around the easiest and best method. (In short, I want most pics/video's stored off the laptop so that my HD is not consumed; but still easy to access if needed, and easy to back up) Also driving this need for a solution is the fact i would like my next lap top to be an Macbook Air, which I know I can't keep my current set up would not work. Any thoughts are appreciated.

if your internal drive has 250 GB and the external drive with the iPhoto library as well, your TimeMachine should have at least 1 TB.
I have read over some of CrashPlans support docs and it sounds like it will be able to back up and restore the iPhoto library, and as long as you restore the entire library and not single photos, it will save and restore all metadata as well.
I studied their documents to. They are saying they can backup any filetype. And they are saying the iPhoto libraries or Aperture libraries will be backed up automatically, when they are in in the Pictures folder, because the Home folder will be backed up.
On their screenshot you can see, that the libraries are backed up as a nested set of folders, and not as a package. That let's me doubt that the dependencies within the package will be treated correctly. To restore from the backup they recommend to restore the set of nested folders. What I could not find anywhere in the documentation is any information on the filesystem they are storing the backup on. If it is not Apple's MacOS Extended (Journaled, not case sensitive) the restored library may be corrupted, because the internal links in the databases may not work. Try to find out something about the filesystem on the backup servers, before you entrust your iPhoto library to that servers.

Communication between Windows 7 and Windows 8(and above) using Sockets(TCP and UDP)

I need to use TCP and UDP using Sockets to communicate between two(or more) applications installed in Windows 7 and Windows 8.
Is it possible.? I tried within a LAN, but in vain. If needed I would post the appropriate code.
Note: I only tried running exe(s) in these machines and not with installation.

Hello Prabodh.Minz,
>>Is it possible.?
It is not clear what develop language you are using, here are examples which uses the C# based on .NET. It created the communition between two machines by using sockets with TCP protocol, a server and a client:
Synchronous example:
Client and
Server.
Asynchronous example:
Client and
Server.
Multi-client per one server - socket programming in .net(C#)
>>Note: I only tried running exe(s) in these machines and not with installation.
There are all .exe.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Synchronizing calendars and contacts using 2 computers and 2 iphones

my husband and I both have a MacBook Pro; we both have an iPhone. Lucky us! We want to be able to synchronize our calendars and contacts on each other's computers. How can we do this without over-writing each other's calendars and address book? We both use Ical and Address book. At the very least, it would be helpful have my husband's work calendar and my home calendar integrated AND our contacts. Please tell me how to accomplish this. Thank you.

If you don't want mobileme, here are two other choices:
http://spanningsync.com/
http://www.markspace.com/synctogether/

Oracle 10g and JAWS -- use of Up and Down Arrow keys

We are in the process of converting an Oracle 6i application to 10g and applying Accessibility standards to our application so that it will work with the JAWS screen reader.
The version of JAWS we are using is 7.10.452 Unicode, The Java Access Bridge version required is version 1.2.
THis problem manifests itself when using the UP and Down arrow keys to move between rows in a mutli-record screen.
The problem is that on using either the Up or Down key JAWS read the content of the current field before moving to the new record and announcing the prompt and content.
Has any one got any solution to this.

Hello Larasoft,
I understand you’re up and down arrow keys are not functioning, is that accurate? I will do all I can to help you with this issue.
I want you to access the setup menu to test the keys out, see instructions below.
1.       Shut down the computer.
2.       Locate the F10 key across the top.
3.       When you turn the computer back on immediately start tapping the F10 key repeatedly.
4.       If successful you should be on setup utility screen. What’s different about this is you can only use you arrow keys to navigate.
5.       Try working the arrow keys up and down on different menus and see if they work.
6.       Once you tested it press F9 to setup defaults and then press F10 to save and exit.
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it.
Please respond at your earliest convenience with you results.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Customizing FD01 and FB70 using PS Class and Characteristics

Hello SAP Experts
I have the following issue:
My client has a requirement where we need to customize the Customer Master (FD01) screen and the Invoice Posting Screen (FB70). A few additional fields have to be added by creating a separate tab. I was intending to take Abaper's help and do this using user exits but I have been suggested by the cleint to use SAP PS Class and Characteristics feature to do this. Can someone please throw some light on this feature and how can i create custom fields on FD01 and FB70 screens. Is there a way we could customize these screens using PS class and characteristics. Your opinions would be much appreciated.
Please kindly give your suggestions. Thanks in advance
Regards,
Nik

Joao Paulo,
Thank you for the response. I have tried to obtain some info from OSS but no luck. Tried all means but there is limited information available.
Nik

Reading (and searching, use of TOC and index) Acrobat files offline

Similar Messages

Maybe you are looking for