Reading data from 2 infocubes in same start routine - RSDRI_INFOPROV_READ

Hi guys,
Is it possible to read data from 2 Infocubes via RSDRI_INFOPROV_READ FM in same start routine of Infosource.
Both infocube have different KF's.
my one Infocube reading is working fine but now need to another infocube in same strat routine.
Help will be appreciated and full points will be assigned.
Thanks in advance,
Harry

Hi,
1.It means I have to call FM twice
2. Can I use same internal table to store data of both infocubes
3. both cubes have got different KF
Can you please explain in detail?
Thanks,
Harry

Similar Messages

How to Read data from Infocube

Dear Friends,
I have requirement to read data from Infocube.
I know the Function module(FM) which SAP provided. The FM name is RSDRI_INFOPROV_READ.
But when i am trying to execute this FM in SE37, it giving "Error generating the test frame" message.
I called this FM in start routine, it giving error while loading.
If any using this please let me know, how to use this. If any have sample code, please share.
Thx
Raj

Hi,
i used to check documentation all time, but this time I forgot to check.
It is well documented. thx for igniting my mind.
bye
Raj

Reading data from infocube

Hi all,
We have an infocube which contains some figures like number of days, number of hours etc. We should calculate some indicators on them, something like:
Ind = Hours1 * 100 / Hours1 + Hours2
where Hours1 and Hours2 are figures which come from two different records, with codes 1 and 2.
We are not using BEx, but some other reporting tool which takes quite a long time over it. So we were asked to write an ABAP program which should read the data out of the InfoCube and calculate these indicators on basis of such fomulas. Writing a Transfer Rule with the InfoCube as DataSource proved not to be such a good idea because data is split in packages for the upload, so a subroutine within the transfer rule might not be able to find the records with codes 1 and 2 within the same package and that gives errors.
The question is: does anyone know of programs/functions/classes which could do the job? so read data from the infocube and eventually update it back into the infocube after the calculations?
Thanks in advance,
Ioana

Hi Ioana,
maybe Analysis Process Designer (APD) can solve your problem. In an APD process you can read the data from any InfoProvider, calculate your key figures in an ABAP routine and write the result to an ODS. This ODS has to be transactional and can't be directly reported, but you can report the ODS data by defining an InfoSet on it; you can also write the ODS data to any cube via the data mart interface. The data package split shouldn't be a problem in the APD process because you can define a partitioning characteristic in the APD routine.
The APD is available in BW 3.x via transaction RSANWB.
Martin

Error reading data from infocube using RSDRI_INFOPROV_READ

hi,
I am trying to write a Function module to read data from an Infocube.
This is a remote enabled Function module and is working fine if I make a few minor changes and customize it to read data from a case of a DSO.
However, for cube, code is showing no syntax errors, but on execution is not returning any data also.
I have tried defining E_T_data as E/F/V tables of the cube, but still not getting any output.
Probably this is related to structure of E_T_data only. . . .
Can anyone please guide me on this.
regards
Parikshit.

Hello,
E_T_DATA needs to defined as an internal table with all the fields you need as an O/P from the infocube you are trying to fetch data from. Just make sure, you keep the name of the fields same as Name of the infoobjects in the Cube. So just define e_t_data Standard internal table with all fields you want to fetch from Infocube (name of fields same as infoobject name).
Also fill in the g_th_sfc, g_th_sfk internal tables with the list of characteristics and Keyfigues you wanna o/p with chanm/kyfnm field populated with exact name of infoobject and chaalias/kyfalias same as defined in g_t_data (good to keep both same).
Thanks
Edited by: Sandesh Shetty on Jul 29, 2008 2:26 PM

Error reading data from Infocube using shell script.

Dear all ,
I am facing a problem while reading data from an infocube using a shell script.
The details are as follows.
One of the shell script reads the data from the infocube to extract files with the values.
The tables used for extraction by the shell script are :
from   SAPR3."/BIC/F&PAR_CUBE.COPA"     FCOPA,
       SAPR3."/BIC/D&PAR_CUBE.COPAU"    COPAU,
       SAPR3."/BIC/D&PAR_CUBE.COPAP"    COPAP,
       SAPR3."/BIC/D&PAR_CUBE.COPA1"    CCPROD,
       SAPR3."/BIC/D&PAR_CUBE.COPA2"    CCCUST,
       SAPR3."/BIC/D&PAR_CUBE.COPA3"    COPA3,
       SAPR3."/BIC/D&PAR_CUBE.COPA4"    COPA4,
       SAPR3."/BIC/D&PAR_CUBE.COPA5"    COPA5,
       SAPR3."/BIC/MCCPROD"      MCCPROD,
       SAPR3."/BIC/SCCPROD"      SCCPROD,
       SAPR3."/BIC/MCCCUSTOM"    MCCCUSTOM,
       SAPR3."/BIC/SCCCUSTOM"    SCCCUSTOM,
       SAPR3."/BIC/SORGUNIT"     SORGUNIT,
       SAPR3."/BIC/SUNIMOYEAR"   SUNIMOYEAR,
/*     SAPR3."/BI0/SFISCPER"     SFISCPER, */
       SAPR3."/BI0/SREQUID"      SREQUID,
       SAPR3."/BI0/SCURRENCY"    SCURRENCY,
       SAPR3."/BIC/SSCENARIO"    SSCENARIO,
       SAPR3."/BIC/SSOURCE"      SSOURCE
The problem is that the file generation by this script (after reading the data from teh infocube) is taking an unexpected time of 2 hours which needs to be maximum 10 mins only.
I used RSRV to get the info about these tables for the infocube:
Entry '00046174', SID = 37 in SID table is missing in master data table /BIC/MCUSLEVEL2
Entry '00081450', SID = 38 in SID table is missing in master data table /BIC/MCUSLEVEL2
and so on for SID = 39 and SID = 35 .
Checking of SID table /BIC/SCUSLEVEL2 produced errors
Checking of SID table /BIC/SCUSLEVEL3 produced errors
Can you please let me know if this can be a reason of delay in file generation (or reading of data from the infocube).
Also , Please let me know how to proceed with this issue.
Kindly let me know for more information, if required.
Thanks in advance for your help.
-Shalabh

Hi ,
In continuation with searching the solution to the problem , I could manage to note a difference in the partition of the Fact table of the infocube.
Using SE14 -> Storage Parameters, I could find the partition done for the fact table as :
PARTITION BY: RANGE
COLUMN_LIST: KEY_ABACOPA
and subsequently there are partitions with data in it.
I need to understand the details of these partitions .
Do they correspond to each requests in the infocube(which may not be possible as there are 13 requests in infocube and much more partitions).
Most importantly, since this partition is observed for this onfocube only and not for other infocubes, it is possible that it can be a reason for SLOW RETRIEVAL of data from this ionfocube( not sure since the partition is used to help in fast retreival of data from the infocubes).
Kindly help.
Thanks for your co-operation in advance.
-Shalabh

Index used or not for selecting data from ODS in a start routine

Dear friends,
In the start routine of the update rules to a cube, I am reading some data of an ODS in to an internal table .
The ODS is indexed. But, I am not sure if the index is at all used in the Select statement (that gets the data from ODS to the internal table in the start routine) while loading data to the cube.
Any help is highly appreciated.
regards,
atlaj

Hi Atlaj
You can findout this is display execution plan for SQL statement in DB02.
Goto DB02. and under diagnostic, you find explain. Select that and enter your query. Make sure that everything here is in capital format. Below is a sample query which I have entered.
SELECT "CRM_SALORG" "SALESORG" FROM "/BI0/QORGUNIT"
WHERE "SALESORG" = ? AND "OBJVERS" = ? AND "DATETO" >= ?
AND "DATEFROM" <= ?
The select parameters should be inside qoutes and in caps and even the from table. Once you enter your query in this format, click on explain. It will show the index scan if the index is present. the output for my query will be something like
0 SELECT STATEMENT ( Estimated Costs = 1,348E+01 [timerons] )
        1 (COOR) RETURN
            2 (    0) TQ
                3 (    0) FETCH /BI0/QORGUNIT
                    4 (    0) IXSCAN /BI0/QORGUNIT~Z1
Where my last statement (line 4) is showing index scan and the name of index read is Z1.
Hope this helps.
Please let me know if you have any problems entering the query in the specified format and u get any error.
Regards
Sriram

DUMP ANALYSIS- DBIF_RSQL_INTERNAL_ERROR when reading data from infocube

HI ALL,
When i am trying to read the data from an info provider RSDRI_INFOPROV_READ.
the runtime error which is comig is DBIF_RSQL_INTERNAL_ERROR
it is throwing a dump which says An internal error in the database interface occurred during access to
the data of table "RSMDATASTATE ".
the lines at which it is dumping are
SELECT SINGLE * FROM RSMDATASTATE
INTO E_S_DATASTATE
WHERE INFOCUBE = I_INFOCUBE
I checked in the table RSMDATASTATE it is having an entry for the required infoprovider.
Please suggest me if anybody across this error in the past.
is there anything to do with cube settings rool ups and compression or something. Please suggeste me.
Thanks in advance
Best regards
SG

check this thread...
[Function Module 'RSDRI_INFOPROV_READ';
--- thanks...

Read data from an Infocube

Hi,
I'm writing a program to read data from an infocube, usfin FM RSDPL_CUBE_DATA_READ, but I can't get a result.
This are the parameters I'm using:
I_INFOCUBE                                = 'ZGE_CUB10'
I_REFERENCE_DATE                  = sy-datum
I_S_RFCMODE-ID                        = BIDCLNT100
I_S_RFCMODE-RFC_RECEIVER = RSDPL_CUBE_DATA_READ
I_S_RFCMODE-PACKAGESIZE    = 100
I_S_DELTAMODE-SYSID             = BID
I_S_DELTAMODE-DELTAMODE   =''
I_T_CHA-chanm    = 'ZGE_KPI'
I_T_CHA-chaalias = 'ZGE_KPI'
I_T_CHA-orderby    = 0
I_T_KYF-kyfnm   = 'ZGE_VALOR'
I_T_KYF-kyfalias = 'ZGE_VALOR'
I_T_KYF-aggr      = 'SUM'
i_t_range-chanm       = 'ZGE_KPI'.
i_t_range-sign           = 'I'.
i_t_range-compop     = 'EQ'.
i_t_range-low            = 'FTL_GLC10_0331'.
i_t_range-high          = 'FTL_GLC10_0331'.
E_T_COLUMN-colname   = 'salida_zge_valor'
E_T_COLUMN-iobjname = 'salida_zge_Valor'
E_T_COLUMN-keyflag    = 'X'
but I keep getting DELTAMODE_ERROR.
any help??? any sample-code you may share??
thanks
MAuricio

found some sample code...
http://www.web-dreamer.de/blog/2009/04/reading-on-sap-bi-infocubes-via-rsdri_infoprov_read.html.
SAP also gives you sample programs on how to use the same...
RSDRI_INFOPROV_READ_DEMO
from thread :
Re: RSDRI_INFOPROV_READ and compound selection conditions
Edited by: Arun Varadarajan on Jun 5, 2009 7:24 PM

Reading data from an infocube into wd application

Hi,
How can we read data from an infocube.I have to read data from two infocubes and then display it in table in an wd application.
I have found an FM RSDRI_INFOPROV_READ to read , but how to use the same in wd application.

Hi Sanjeev,
Use CALL FUNCTION To use FM in WD.
something like this..
Declarations for BAPI_HU_DELETE_FROM_DEL
DATA : Del     TYPE BAPIDELICIOUSDELIVERY-DELIVERY_NUMBER,
         Return1 TYPE TABLE OF BAPIRET2.
del = lv_imp_outdel.
DATA : HUKEY    TYPE BAPIHUKEY-HU_EXID,
         wa_hukey TYPE BAPIHUKEY-HU_EXID.
loop at lt_pack_mat into ls_pack_mat.
wa_hukey = ls_pack_mat-HANDLING_UNIT.
MOVE wa_hukey TO hukey.
endloop.
Calling BAPI_HU_DELETE_FROM_DEL
CALL FUNCTION 'BAPI_HU_DELETE_FROM_DEL'
    EXPORTING
      DELIVERY = del
      HUKEY    = HUKEY
    TABLES
      RETURN   = Return1.
Commit Work
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
Chers,
Kris.

Gurus..need help in reading data from virtual infocube

Gurus,
I have to read data from an virtual infocube...I am trying to use FM RSDRI_INFOPROV_READ to read data but it doesn't work..
I am doing exactly what has been done in the demo program RSDRi_INFOPROV_READ_DEMO...
Please help me...its really URGENT...
Thanks
sam

Check out this thread....
must be helpful
Re: Read data from 0BWTC_C02 via ABAP

Error reading data from an infocube

Hello,
I want to read data from a remote infocube in tcode listcube, and I get this 2 error messages: "Error reading the data of InfoProvider IC_SNP_DR" and "Error when generating program". This is a remote cube reading data from a SNP Planning Area.
I´ve already activated Plng Object Strucuture 9ASNPBAS and repair all infoobject but in tcode /SAPAPO/MSDP_ADMIN in 9ASNPBAS I get message "Not All InfoObjects Can Be Read". Is this why I get the error in reading the infocube?
Does anyone know why I get this errors and how to solve them?
Thanks and Regards,
Teresa Lopes

Teresa
From /SAPAPO/MSDP_ADMIN go to extras/data extraction tools. This gives you all the things you need to manage the extractors on the snp planning areas. you can use RSA3 to test the extractor and pull data to a list. Are you sure you want to extract using the total POS (9SNPBAS). Based on the data you need you might want to extract based on one of the standard SNP aggregates. MALO (material location) for example.
You mention that the POS was active. Make sure you Planning area is also initialized
George

Reading data from Real-time Infocube

Is it possible to read data from the Real-Time Infocube by using the function module
RSDRI_INFOPROV_READ

Hi,
If records from both the request should be read ie Request under processing(which is in yellow) and Request which is processed(Which is in Green) at a time. What should be done.
Is there any function module which returns the records of both requests.
Rgds,
Ganesha

Can not read data from URL!

Hello,
I want to read data from URL (http://84.100.130.82:8000/;stream.nsv). But can not do it. Because when try to call function openDataInputStream() shows this error: java.io.IOException: response does not start with HTTP it starts with: ICY. How I can fix this bug?
HttpConnection c = null;
InputStream is = null;
OutputStream os = null;
StringBuffer b = new StringBuffer();
String response,
responseLitle;
c = (HttpConnection)Connector.open(“http://84.100.130.82:8000/;stream.nsv”);
os = c.openOutputStream();
os.flush();
is = c.openDataInputStream(); // ERROR CODE HERE
int ch;
// receive output
while ((ch = is.read()) != -1)
b.append((char) ch);
response = b.toString();Regards, Ramunas

Hi, I�m trying to do the same as above, get MP3 from a Shoutcast server.
I got the same fault ("response does not start with HTTP it starts with: ICY") when I tried to open an HttpConnection as bellow:
============================================
HttpConnection conn = (HttpConnection) Connector.open("http://64.236.34.196/stream/1074");
Then I tried to open a socket connection as bellow:
======================================
SocketConnection conn = (SocketConnection) Connector.open("socket://64.236.34.196:80");
String get = "GET /stream/1074 HTTP/1.1";
DataOutputStream os = conn.openDataOutputStream();
os.writeUTF(get);
InputStream is = conn.openInputStream();
But then I got the following error:
=========================
java.lang.SecurityException: Target port denied to untrusted applications
Could someone help me to find out what is going on?
Thanks a lot!

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Get the request id from a PSA in start routine in transformation

Hello All,
I need to get the request id of the PSA (source_package) during the start routine or field routine and then use it to look up the Date when requested was created using the table RSREQDONE.
I'm extracting data from ECC, and then I load the data from the Datasource, then I use DTP/Transformation to load data into a ODSO.
<removed>
Thanks Guys,
JMelo
Edited by: Arun Varadarajan on Feb 6, 2009 12:09 PM

Hi John,
its pretty simple to read data from a Info-cube.
Use the Function Module :RSDRI_INFOPROV_READ".
You can pass the name of fields and filters which you want to read from the cube.
Hope this wil help.

Reading data from 2 infocubes in same start routine - RSDRI_INFOPROV_READ

Similar Messages

Maybe you are looking for