Reading data from applciation server

Hi Experts,
I am trying to read a text file from application server .
iam using the following code.
open dataset apl_path for input in text mode.
DO
Read from apl_path to string
split string at '#' into work area field 1
work area field 2
work area field 3
append work area into i_table.
enddo
close dataset.
but when I try to split the string, it does not work the value of the whole row goes to the work -area-field1 only, other work area fileds fdoes not get populated
its tab delimited field and iam using hash as separator
its SAP 4.6,
please help
thanks...

Hi ,
As per my understanding , these will not be populated seperately and you need to seperate these fields on your own.
Fetch the row in string type variable and they seperate based on the properties of fields .
Hope you get it .

Similar Messages

The attempt to read data from the server failed

Today I was looking into an error with several IMAP accounts in Apple Mail:
+The attempt to read data from the server "<<servername.tld>>" failed.+
At first I thought this was an Apple Mail problem, as the accounts in question seemed to work just fine when not used in combination. One possible answer to this problem is rather short:
Apple Mail uses IMAP caching, which uses more than 4 connections at the same time to the mail server. Some mail servers (like courier-imap in its default configuration) do not allow that much connections from the same IP address. The more accounts you are trying to connect to at the same time raises this number of connections. Meaning while you could probably check one account for new mails, the second will ultimately fail for no obvious reasons. The only solution to this problem is to raise the connections allowed by your IMAP server software. this solution only applies to people who have root access to their mail server.
in courier-imap you have to edit /etc/courier-imap/imapd
and change MAXPERIP=4 to a higher number (5 to 10 times the number of accounts you want to check simultaneously)
and change MAXDAEMONS=40 to a higher number (with only one user 200 might work, whereas if you serve multiple users, something like 500 or higher might be better suited).
of course increasing the numbers increases load on your server. this is why there are these restrictions in place.

MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

Server error: "The attempt to read data from the server '(null)' failed"

Multiple times during each day my client (Mail.app) puts up a little exclamation mark "!" next to the mail account hosted on our Leopard Server. Clicking on this little alert icon pops up a message that reads:
+There may be a problem with the mail server or network. Verify the settings for account “Leopard Server Account” or try again.+
+The server returned the error: The attempt to read data from the server “(null)” failed.+
I can make the "!" go away by choosing Mailbox>Synchronize>Leopard Server Account. And everything seems peachy but it inevitably pops up again in another hour or two. It's annoying because I'm not sure if mail is getting through or not when the "!" is up.
Any ideas why this is happening?

MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

Attempt to read data from the server failed...

I'm getting the following error on one of my email accounts:
+There may be a problem with the mail server or network. Verify the settings for account “[my account]” or try again.+
+The server returned the error: The attempt to read data from the server “[my account]” failed.+
I'd like to find out more about the error, so that I can start to track this down and see if there is a problem with the mail server settings, or if the problem is on my end.
I don't see any reference to this error in the logs – would it be somewhere else?

I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
The server error encountered was: The attempt to read data from the server...
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, no IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

GUI_UPLOAD NOT READING DATA FROM PRESENTATION SERVER

H HI IN MY APPLICATION I HAVE USED GUI _UPLOAD TO READ DATA FROM PRESENTATION SERVER IT WAS WORKING FINE BUT NOW I HAVE SCHEDULED IT IN BACK BACKGROUND WHEN I DEBUGGED IT GUI _UPLOADI NOT READING DATA FROM PRESENTATION SERVER
Edited by: ravikumar1006 on Mar 10, 2012 1:18 PM
Moderator message: FAQ, please search before posting, do not write in all upper case.
Edited by: Thomas Zloch on Mar 10, 2012 3:17 PM

The issue is that, when you schedule a program as background job runs on application server not on local pc for that program use the application server resurces and its not possible to read files from pc. You can find a lot of answers in forum for this

Reading Data from SQL Server 2000 Linked Servers

Hello,
I have a colleague who wants to read data from a OO4O driver Linked Server my FRENCH_FRANCE.US7ASCII Oracle 8i database.
He's got some troubles to read data with "é", "à", and so on. They always replaced by "?"
Since I have ask him to use SQL Developer on his server to see if he has got configuration problems, his PL/SQL queries return "square figure" characters (not the usual "²") instead of "?".
For info, I've said it to use CONVERT(column, 'FR8DEC', 'US7ASCII) but it doesn't work too (also try with 'UTF8' or 'WE8MSWIN1252')
Is there a way with the SQL Server collation ???
How can I solve his problem ???

The select query returns the following infos :
PARAMETER VALUE
NLS_CHARACTERSET US7ASCII
NLS_NCHAR_CHARACTERSET US7ASCII
My colleague uses the 10.2.0.1.0 client with ODAC 10.2.0.2.20.
His SQL Server linked server is 2000 with the SQL_Latin1_General_CP437_BIN (he tried the use of the distant NLS_LANG option and the no set the NLS_LANG too with no results).
Thanks in advance,
Yours,
Mickaël

Problem to read data from application server.

read dataset reads data only up tp 255 char.
her i want to read more data .
and i am executing that in background so i can not use gui_upload then what is the solution.

Read datasets should be able to read any length. Are you sure it is not your program that is truncating it?
GUI_UPLOAD is a FM to read files from the presentation server (your PC), at the end, it performs READ DATASET anyways.
Please provide code example.
Leonardo De Araujo

Application not reading data from opc server?

Hello,
I have developed an application that reads and writes information from and to an OPC server (Phoenix Contact), and for this have used the DSC Module and labview 2014. When I run it from LabView, it works perfectly. I want to deploy it to another computer and for that I have created an Installer that includes the source files, the labview runtime, the DSC runtime, ni distributed manager 2014, and the variable engine.
When I install my application to the other computer, it doesn't "see" the data from opc, although the data reaches the computer (I've checked). Can you please help me with some suggestions regarding this problem? Am I missing something?
Thank you.

You don't have NI OPC Servers on either computer? That's generally the software required to talk directly to an OPC Server. On the computer where things are working, try going to your start menu and searching for NI License Manager. See if there is a listing for NI OPC Servers. I'd expect it to be activated to a single driver.
On the deployment PC, make the same check. I'd expect it to be missing.
The distributed manager is just a way to view the shared variables you have on the system and interact with them. DSC works with NI OPC Servers to display your tags. The RTE is needed on the deployment PC. But, I'd also expect you to need a way to convert the tag into the shared variable you're seeing in both the DSC RTE and distributed manager.
Using the Phoenix utility shows the computer is connected to the same network. But, it doesn't show the tags are reaching LabVIEW. You're generally better off starting with the Quick OPC Client as this will use similar methods that LabVIEW will.

Reading data from presentation server.

I have a text file in which records are space seperated.I will be entering the file name in selection screen in a parameter 'infile1' and I am trying to upload these records into a internal table using function module GUI_UPLOAD.but i get a message saying that the filename given has a different field type .function module allows you to specify only fields of particualar type under filename. my code is.
data: begin of period_rec,
          pval01(3),                   "version
          pval04(4),                   " fiscal year
          pval06(10),                  " cost centre
          pval12(10),                   " cost element
          bdc0301(15),                 " fixed cost period 01
          bdc0302(15),                 " fixed cost period 02
          bdc0303(15),                 " fixed cost period 03
          bdc0304(15),                 " fixed cost period 04
          bdc0305(15),                 " fixed cost period 05
          bdc0306(15),                 " fixed cost period 06
          bdc0307(15),                 " fixed cost period 07
          bdc0308(15),                 " fixed cost period 08
          bdc0309(15),                 " fixed cost period 09
          bdc0310(15),                 " fixed cost period 10
          bdc0311(15),                 " fixed cost period 11
          bdc0312(15),                 " fixed cost period 12
       end of period_rec.
parameters : infile1 like rlgrap-filename.
data: tab like period_rec occurs 10 with header line.
call function 'GUI_UPLOAD'
exporting
    filename                      = infile2
   FILETYPE                      = 'ASC'
tables
    data_tab                      = tab
EXCEPTIONS
if sy-subrc <> 0.
endif.

Hi,
Chk ths:
as above posts just change infile1 to string and secondly u r giving infile2 which is not declared.
*& Report ZMBJ_GUI_UPLOAD
REPORT zmbj_gui_upload.
DATA: BEGIN OF period_rec,
pval01(3), "version
pval04(4), " fiscal year
pval06(10), " cost centre
pval12(10), " cost element
bdc0301(15), " fixed cost period 01
bdc0302(15), " fixed cost period 02
bdc0303(15), " fixed cost period 03
bdc0304(15), " fixed cost period 04
bdc0305(15), " fixed cost period 05
bdc0306(15), " fixed cost period 06
bdc0307(15), " fixed cost period 07
bdc0308(15), " fixed cost period 08
bdc0309(15), " fixed cost period 09
bdc0310(15), " fixed cost period 10
bdc0311(15), " fixed cost period 11
bdc0312(15), " fixed cost period 12
END OF period_rec.
PARAMETERS : infile1 type string.
DATA: tab LIKE period_rec OCCURS 10 WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename = infile1
    filetype = 'ASC'
TABLES
    data_tab = tab.
* EXCEPTIONS
IF sy-subrc <> 0.
ENDIF.

Reading Data from a SQL table to a Logical file on R/3 appl. Server

Hi All,
We would like to create Master Data using LSMW (direct Input) with source files from R/3 Application Server.
I have created files in the'/ tmp/' directory however I do not know how to read data from the SQL table and insert it into the logical file on the R/3 application server.
I am new to ABAP , please let me know the steps to be done to acheive this .
Regards
- Ajay

Hi,
You can find lot of information about Datasets in SCN just SEARCH once.
You can check the code snippet for understanding
DATA:
BEGIN OF fs,
carrid TYPE s_carr_id,
connid TYPE s_conn_id,
END OF fs.
DATA:
itab    LIKE
          TABLE OF fs,
w_file TYPE char255 VALUE 'FILE',
w_file2 TYPE char255 VALUE 'FILE2'.
SELECT carrid connid FROM spfli INTO TABLE itab.
OPEN DATASET w_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT. "Opening a file in Application
                                                        " Server to write data
LOOP AT itab INTO fs.
TRANSFER fs TO w_file. "" Writing the data into the Application server file
ENDLOOP.
CLOSE DATASET w_file.
OPEN DATASET w_file FOR INPUT IN TEXT MODE ENCODING DEFAULT. "Opening a file in Application
                                                      " server to read data
FREE itab.
DO.
READ DATASET w_file INTO fs.
IF sy-subrc EQ 0.
    APPEND fs TO itab.
    OPEN DATASET w_file2 FOR APPENDING IN TEXT MODE ENCODING DEFAULT. "Appending more data to the file in the
                                                       " application server
    TRANSFER fs TO w_file2.
    CLOSE DATASET w_file2.
ELSE.
    EXIT.
ENDIF.
ENDDO.
Regards
Sarves

SQL Server 2012 64 bit - reading data from dbf (DBase 3/4/5 or VFoxPro) - solution and examples

It took me quite a while to find a solution that will enable me to read dbf files from 64 bit SQL server, so i decided to create this guide for all of you guys searching for an answer.
Download and install Access Database Engine 64 bit : http://www.microsoft.com/en-us/download/details.aspx?id=13255
Creating Linked server for me is the most elegant solution
To create a Linked Server modify following sql statement with your data and execute it:
EXEC master.dbo.sp_addlinkedserver
@server = N'DBFServer',
@srvproduct=N'',
@provider=N'Microsoft.ACE.OLEDB.12.0',
@datasrc=N'D:\DBF\',
@provstr=N'dBASE IV'
You can read data directly without linked server, but i find this less elegant
To read data directly modify following sql statement with your data and execute it:
Use KTCDB
GO
sp_configure 'show advanced options', 1
reconfigure
GO
sp_configure 'Ad Hoc Distributed Queries', 1
reconfigure
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'AllowInProcess' , 1;
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'DynamicParameters' , 1;
SELECT * FROM OPENROWSET('Microsoft.ACE.OLEDB.12.0',
'dBASE IV;Database=D:\DBF\;',
'SELECT * FROM ODMRAD')
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'AllowInProcess' , 0;
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'DynamicParameters' , 0;
GO
sp_configure 'Ad Hoc Distributed Queries', 0
reconfigure
GO
sp_configure 'show advanced options', 0
reconfigure
GO
I hope this will help you guys avoid frustration and wasting lots of time.

Visakh, i believe you are mixing terms 'reading' and 'importing', as with solution i proposed you can consume 'live' data without the need to
import it on every change.
To clarify : Data in DBF's can change at any point in time, and with my solution whenever you try to read data from either linked server or directly, you will always have most recent data, contrary to the import methods where you are cloning data and actually
could run into many problems synchronizing original and cloned data.
Ok..I understand that
Based on your data volatility you can configure an automated job for executing SSIS package to extract latest of data from dbase. But again it wont be "in real time". There will be slight delay depending on frequency you choose for job.
I was suggesting it more from a datawarehousing perspective whether data refresh happens only after predefined period (daily,6hrs etc)
If requirement is to get realtime data when you desire then definitely linked server would be the way to go.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Reading data from flat file in aplication server

hi all,
can any body provide code how to read data from flat file which is in application server.
thanks in advance

hi,
chk this sample code.
parameters: p_file like rlgrap-filename obligatory
default '/usr/sap/upload.xls'.
types: begin of t_data,
vbeln like vbap-vbeln,
posnr like vbap-posnr,
matnr like vbap-matnr,
werks like vbap-werks,
megne like vbap-zmeng,
end of t_data.
data: it_data type standard table of t_data,
wa_data type t_data.
open dataset p_file for output in text mode encoding default.
if sy-subrc ne 0.
write:/ 'Unable to open file:', p_file.
else.
do.
read dataset p_file into wa_data.
if sy-subrc ne 0.
exit.
else.
append wa_data to it_data.
endif.
enddo.
close dataset p_file.
endif.
Rgds
Anver

Mail cannot read data from server

Hello!
I'm fairly new to Macs, having used a PC for 12 years, and am still getting used to it's little quirks.
I now have a problem where one of my email servers (a POP account) makes Mail (and Thunderbird for that) come up with;
The attempt to read data from ** has failed
Now, I know that the log on info is OK, as using my Webmail account, on the same iMac, accesses the mail fine. I've emptied the relevant mail account, both locally and on the server, removed the local settings and reset them using info on various Mac help sites.
Nothing that I know of has changed, I've ran and re-ran the reset permissions tool.
Can anyone give me any help?
Intel iMac 20" Duo 2ghz Mac OS X (10.4.8)

Hello, and welcome to the Discussions.
Has this POP account ever worked in Mail? Is the POP3 server in question unique to this one account, or do you have other accounts from the same provider, using the same POP3 server as the Incoming Server?
Ernie

JavaConsole Error: Problem reading data from server

HI All
We are getting this error on java console on a page:
Error: Problem reading data from Server - Java.Security.AccessControlException:access denied (java.util.PropertyPermission http.strictpostredirect Read)
In this page we are not firing a SQL Query of huge data.
Any suggestions on this why it is happening?
Thanks
Manisha

Manisha,
I think JVM(Java Virtual Machine) is trying to access something at network level and it cant able to find it.Or any new patches of java is installed.
Or may be due to IIS or Applet,Don't know exactly.
You can find some answers in below links:
http://java.sun.com/j2se/1.4.2/docs/api/java/security/AccessControlException.html
http://www.webdeveloper.com/forum/archive/index.php/t-46358.html
-Suresh

Can not read data from URL!

Hello,
I want to read data from URL (http://84.100.130.82:8000/;stream.nsv). But can not do it. Because when try to call function openDataInputStream() shows this error: java.io.IOException: response does not start with HTTP it starts with: ICY. How I can fix this bug?
HttpConnection c = null;
InputStream is = null;
OutputStream os = null;
StringBuffer b = new StringBuffer();
String response,
responseLitle;
c = (HttpConnection)Connector.open(“http://84.100.130.82:8000/;stream.nsv”);
os = c.openOutputStream();
os.flush();
is = c.openDataInputStream(); // ERROR CODE HERE
int ch;
// receive output
while ((ch = is.read()) != -1)
b.append((char) ch);
response = b.toString();Regards, Ramunas

Hi, I�m trying to do the same as above, get MP3 from a Shoutcast server.
I got the same fault ("response does not start with HTTP it starts with: ICY") when I tried to open an HttpConnection as bellow:
============================================
HttpConnection conn = (HttpConnection) Connector.open("http://64.236.34.196/stream/1074");
Then I tried to open a socket connection as bellow:
======================================
SocketConnection conn = (SocketConnection) Connector.open("socket://64.236.34.196:80");
String get = "GET /stream/1074 HTTP/1.1";
DataOutputStream os = conn.openDataOutputStream();
os.writeUTF(get);
InputStream is = conn.openInputStream();
But then I got the following error:
=========================
java.lang.SecurityException: Target port denied to untrusted applications
Could someone help me to find out what is going on?
Thanks a lot!

Reading data from applciation server

Similar Messages

Maybe you are looking for