Reading data from table dased on time.......

Hello,
I am having small issue..... i am having a set of recors in internal table. I am reading the record based on time.
While reading my time and the time recors stored in table having slight difference.
Now how to pull approprate records based on time saying plus or mines tolerance....
It is urgen.... can any one help out in this.........

Hi Feroz,
Compare the time with Comparison operator and retreived the records matching Hours and Minutes.
Thanks

Similar Messages

How to read data from table GLFUNCA quickly?

Hello everybody!
Recently,my colleague has programmed a report about reading data from table GLFUNCA,and its speed is very slowly and exceeded limited time sometimes .
Excuse me?
how to use INDEX and VIEW TO accelerate it?
pls supply my helpful solutions.
Thanks!
Best wishes!

Hi,
Please check your SELECT statement to find out what are the columns being used in the WHERE clause. Then go to SE11 and find out if there are indexes on those columns.
If Indexes don't exist then you can create indexes on those columns, which might improve the performance.
However, there might be other areas also, where the performance can be improved. Do a run time analysis / trace and figure which part of the program is taking maximum time.
Regards,
Ravi
Note : Please mark the helpful answers

Read data from Table at XI during Mapping

Hi experts
How we can pick data from one database table during Mapping, the table is at XI system.
when we are picking data from table at R/3, we are using RFC Function Module/ BPM, can we pick data from XI database table during mapping ?
what will be the steps to pick it ?
Please Help.
Regards,
Study SAP

hi Study Sap
You may use RFC lookup
kindly follow these links for RFC lookup
RFC Lookup.
Look ups.
/people/francesco.bersani/blog/2007/03/05/data-lookup-optimized
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
/people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Use this crazy piece for any RFC Mapping Lookups!
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
SAP XI Lookup API
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Lookups in XI made simpler
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
regards
Sandeep Sharma
PS if helpful kindly reward points

Reading data from Table type from Badi /sapapo/curto_create

Hi,
I have been trying to read data from badi /sapapo/curto_create . In this badi there is method CS_PPDS_RTO.
which has nested structure upto 8 level. I have been trying to read data but i am not suceesfull in reading data from the stsructre
which is present at lowest level.
The nested structure of the BEFORE_SAVE is following way.
BEFORE_SAVE-CS_PPDS_RTO-HIRARCHY-ADD_APPLICTN_DATA-MODES-BODY-CAP_REQS-RESUID.
I have to read the value of reusid bt i am not sure whow to read this value can you please help me by giving some Bapi or method
to read the value of Reusid .
Thanks

Hi!
DATA: lv_resuid TYPE resuid.
LOOP AT CS_PPDS_RTO-HIRARCHY-ADD_APPLICTN_DATA-MODES-BODY-CAP_REQS-RESUID
INTO lv_resuid.
ENDLOOP.

Reading data from table on screen .

Hi
i have a 'Z' screen which contains table - i want to read the content of the table from screen beacuse some times the user fill the table fileds but doesnt press the ENTER key and the data he filled in the table on screen doesnt enter the internal table, is there a way to read table contant from screen ?
thanks
Elad

hi eladush,
below is the master table contol program, hope its help you
<removed by moderator>
Moderator message: please post only relevant code parts, your posts must contain less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on May 31, 2011 9:41 AM

Reading data from table control in an internal table

Hello All,
I want to read the data entered in the screen in an internal table,screen has header segment fields of an idoc and two item segment fields with multiple occurance in form of two table control,have to read both the table control and have to pass it to idoc inbound function based on postion(posnr) of the order. can anyone provide me with the sample code for the same .
Thanks and Regards,
Gunjan

hi gunjan
refer to the folllowing code. it will work for u
Creation of an IDoc generation program
The following code extract contains everything needed to generate an IDoc from data contained in a table.
FORM F_110_SEND_IDOC.
CONSTANTS:
C_MESTYP TYPE EDIDC-MESTYP VALUE 'ZVISTAPM',"message type
C_DOCTYP TYPE EDIDC-IDOCTP VALUE 'ZVISTAPM01',"idoc type
C_SEGNAM TYPE EDIDD-SEGNAM VALUE 'Z1VISTAPM'."segment name
DATA:
I_ZVISTA_PM TYPE ZVISTA_PM_T OCCURS 6000,
I_EDIDC TYPE EDIDC OCCURS 0,
I_EDIDD TYPE EDIDD OCCURS 0,
WA_ZVISTA_PM TYPE ZVISTA_PM_T,
WA_EDIDC TYPE EDIDC,
WA_EDIDD TYPE EDIDD,
WA_Z1VISTAPM TYPE Z1VISTAPM,
V_OCCMAX TYPE IDOCSYN-OCCMAX,
V_NBSEG TYPE I.
CLEAR WA_ZVISTA_PM.
CLEAR WA_EDIDC.
* Save the message type and the basic IDoc type
* in the control segment
MOVE C_MESTYP TO WA_EDIDC-MESTYP.
MOVE C_DOCTYP TO WA_EDIDC-IDOCTP.
* Retrieve the maximum number of segments in the basic IDoc
* type
SELECT MIN( OCCMAX )
FROM IDOCSYN
INTO V_OCCMAX
WHERE IDOCTYP EQ C_DOCTYP AND SEGTYP EQ C_SEGNAM.
* Save the whole ZVISTA_PM_T table content
* in the I_ZVISTA_PM internal table.
SELECT *
FROM ZVISTA_PM_T
INTO CORRESPONDING FIELDS OF TABLE I_ZVISTA_PM.
* Create a data segment for each line of I_ZVISTA_PM
LOOP AT I_ZVISTA_PM INTO WA_ZVISTA_PM.
MOVE-CORRESPONDING WA_ZVISTA_PM TO WA_Z1VISTAPM.
CLEAR WA_EDIDD.
MOVE C_SEGNAM TO WA_EDIDD-SEGNAM.
MOVE WA_Z1VISTAPM TO WA_EDIDD-SDATA.
APPEND WA_EDIDD TO I_EDIDD.
CLEAR WA_ZVISTA_PM.
CLEAR WA_Z1VISTAPM.
ENDLOOP.
* Count the number of data segments
DESCRIBE TABLE I_EDIDD LINES V_NBSEG.
* If the number of data segments exceeds the maximum
* allowed number, then edit a message in the spool,
* then display an error message (quit the program)
IF V_NBSEG GT V_OCCMAX.
WRITE:/ TEXT-003, V_OCCMAX.
MESSAGE E751.
ENDIF.
* Call the IDoc creation function
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
    MASTER_IDOC_CONTROL = WA_EDIDC
TABLES
    COMMUNICATION_IDOC_CONTROL = I_EDIDC
    MASTER_IDOC_DATA = I_EDIDD
EXCEPTIONS
    ERROR_IN_IDOC_CONTROL = 1
    ERROR_WRITING_IDOC_STATUS = 2
    ERROR_IN_IDOC_DATA = 3
    SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
    OTHERS = 5.
* If there was an error, display a message (quit the
* program)
IF SY-SUBRC NE 0.
MESSAGE E746.
ENDIF.
ENDFORM.
regards
ravish
<b>plz dont forget to reward points if useful</b>

Reading data from tables SXMSCLUP and SXMSCLUR

Hello!
In BI 7.0, there is no Delta Q for loading XML data. We are using a functional module in ABAP proxy, to push data from XI directly into BI PSA.So in the PSA, we get the records which have successfully reached.
But for the failed records, we can see them in XML format in the tcode :SXMB_MONI.
Now, my requirement is to extract the primary key of the data in the payload and create a csv file, saying that this records have failed.
For that, i found that the data is stored in tables SXMSCLUP and SXMSCLUR, but in Hexadecimal format, i.e. kind of encrypted.
I was wondering how to extract and read this data... that too, only 1 field in the data?
In SDN there is a post which gives some Java classes, but i was hoping if there is an easier way out, maybe in ABAP??
Any help in this would be appreciated.

HI,
Please try to see the below links
/people/kamaljeet.kharbanda/blog/2005/09/16/xi-bi-integration
/people/sergio.locatelli2/blog/2006/10/15/integration-sap-bi-and-xi-a-critical-point-of-view
/people/marian.harris/blog/2005/06/23/need-to-get-a-sap-netweaver-component-implemented-quickly-try-sap-best-practices
/people/sravya.talanki2/blog/2006/12/08/business-case-integration-need-of-bi-and-sap-xi-episode1
/people/ginger.gatling/blog/2005/12/02/innovative-ways-to-use-alerts
/people/community.user/blog/2007/01/08/access-netweaver-how-to-guides-from-one-consolidated-page
/people/sravya.talanki2/blog/2006/12/14/business-case-integration-need-of-bi-and-sap-xi-episode2
See the michal's reply and other reply also how to see the blob fields data.
In Which Database Table the Messages are Stored in XI
Regards
Chilla

HELP!!!! How to read data from a file at time to time?

i store temporary string data in a file(the data changes always), and i need to read the data in the file from time to time, so how can i read from the file like every 5 seconds?

Please i need your help mr. noahw. i have a timer called timer1 inside that timer i am starting a thread to read the data in a file to me, then i have another timer timer 2 in which it takes the data already read from timer 1 and draws them on a GUI. the problem with me is that, i am unable to set a correct time for each of the two timers such that, every time timer one executes that is a new data is generated i need to draw only one figure coreesponding to those data, then when a new set of data is read i need to draw another figure based on the new data read, please help me with this becasue i need it urgently, this is my email, [email protected], and i can offer this reply as many points as you want if this helps you to help me, i am counting on you.

Read data from table type

Hi everyone,
I am calling a FM BBP_READ_ATTRIBUTES, it exports a line ET_ATTR(Table type) , now in this there is a field VLIST which is an Internal table . and It has entry in it.
Now I require to get this internal table.
I declare in data statement var type tabletype.
How exactly can i retreive this internal table .
when i double clicl on ET_ATTR , it a tabl type but i calls a line type BBPS_ATTR which is like a structure and there is a feild like VLIST which is an internal table .
Please help me to retrieve the data in this internal table.
Reagrds,
Raj

Plz try the following..
FIELD_SYMBOLS: <fs_vlist_tab> type VLIST. " plz give the table type of VLIST
DATA: WA_VLIST TYPE LINE OF VLIST
READ TABLE ET_ATTR INDEX 1. " as you saying it has only one line, read only index 1. o.w. you can read the other lines too as per you requirement.
ASSIGN ET_ATTR-VLIST TO <FS_VLIST_TAB>.
READ TABLE <FS_VLIST_TAB> into WA_VLIST index 1.
* and process your WA_VLIST as requried..
Regards
Prax

Reading data from table and print the value based condition

hi
my table like this
slno | value1 | value2 |
1            0            5
2            5           10
3           10          15
assume n= 8 ( where n is user define)
i want output like
number 8 between value 5 and 10
plz help

Hi,
Try:
Select 'Number '+ U_Value3 + ' Between '+ U_Value1'and 'U_Value2
From [dbo\].[@UDT T0\]
Where T0.U_Value3=[%0\] and T0.U_Value3 BETWEEN U_Value1 AND U_Value2
Thanks,
Gordon

Reading data from table control

Hi,
Intially I have a table control and in that I am entering deliveries(manually), how to read them into internal table..plz advise
regards.

Hi,
Use the FM DYNP_VALUES_READ
Regards,
Vikranth

Reading data from Lookup [qualified flat] (multi-valued) table

I have a main table u2019ABCu2019 which has a Lookup [qualified flat] (multi-valued) field u2018XYZu2019 along with some other text fields. I am able to read data from table ABC including lookup field data, but I do not see the relation
For Ex: If for a contract in table u2018ABCu2019, there are multiple line items in look up table. I have a contract with 2 line items in u2018ABCu2019, but 4 line items in look up table (2 records each for each line item with item number). Now, when I read the data from table u2018ABCu2019 for that contract, I get all the 4 lines in result table; but item no is blank even though there is item no field in table u2018XYZu2019.
Below is the sample code:
wa_query-parameter_code = Contract ID Field.
wa_query-operator = 'EQ'.
wa_query-dimension_type = 1. "mdmif_search_dim_field.
wa_query-constraint_type =8. " mdmif_search_constr_text.
wa_string = Contract Number.
GET REFERENCE OF wa_string INTO wa_query-value_low.
APPEND wa_query TO lt_query.
CLEAR wa_query.
CALL METHOD lcl_api->mo_core_service->query
        EXPORTING
          iv_object_type_code      = 'ABCu2019
        it_query                 = lt_query
        IMPORTING
          et_result_set            = lt_result_set_key.
LOOP AT lt_result_set_key INTO ls_result_set_key.
    lt_keys = ls_result_set_key-record_ids.
ENDLOOP.
Contract Price for lower bound
ls_result_set_definition-field_name = XYZ'.
APPEND ls_result_set_definition TO lt_result_set_definition.
CALL METHOD lcl_api->mo_core_service->retrieve
    EXPORTING
      iv_object_type_code      = 'ABCu2019
      it_result_set_definition = lt_result_set_definition
      it_keys                  = lt_keys
    IMPORTING
      et_result_set            = lt_result_set.
In table lt_result_set, I see 4 records, but I do not know which 2 records belong to item 1 of the contract and other 2 records for item2.
Can anyone help me in resolving this. Any kind of help is appreciated.
Thanks,
Shekar

i do not quite understand ur problem statement ..
but if u have items in the main table to which QLUT entries are linked ..
then when you read the main table record (u get LinkIds at the record level) that gives u the relation to the Qlookup values
i mean for ur case - u would get only 2 values in the QLUT values for the "selected" record in the main table
am not sure if you say correctly - that you get "unlinked" values in the QLUts
so u should 2 values in lt_result_set and not 4 .. see if u are using the LinkIds properly
hth
thanks
-Adrivit

Reading Data from a Table With an Expert

Hi all - I'm trying to write an Expert in OWB that would read data from a table and create a new table based on that information. I have the table creation part down, but how can I read data from a table with an Expert? From what I've read, Experts only deal with metadata, and there is no mechanism in Experts to actually read data in the tables. Does OraTcl work in Experts? Has anyone ever came across this problem, and if so, how did you solve it? Thanks in advance for your time! - Don

Hi Don
Can also use Java and JDBC from within Tcl, see the routines in this file below, take modify or whatever;
http://blogs.oracle.com/warehousebuilder/ombora.tcl
source <dir>\ombora.tcl
set g_user scott
set g_upwd zzzzzz
set g_hostname localhost
set g_port 1521
set g_srvname ora111
oraconnect $g_user $g_upwd $g_hostname:$g_port:$g_srvname
oraselect "select * from emp" ""
As well as dumping the results to stdout (you probably want to comment that part out and change any other part you don't like), g_res is a ResultSet object you can use to do whatever.
Cheers
David

How to Read Data from a table (horizontal axsis) in an existing report

Hi to all,
I've a question. I must read the data in a table of an existing report. I develope with BO XI 3.0
I don't know how to reach the table in my report from SDK.
this is my code:
reports = document.getReports();
rep = reports.getItem(0);
the report has the title and a table horizontal axsis.
I must read the column name(header column) of the table and all rows for retrieving values.
Thank u in advance for your attention.

hi ChinMay,
thank u for your answer.
I would like to ask u if Ireport refers crystal reports, while i mean to read data from a webi report.
I've tried in many manners to read this data and i've read the SDK, but i'm unable to reach the table of my report for reading its rows. i'm able to export in XML format, i'm able to get reportelement , block, but in the java's example of SDK its not present how to obtain the reportbody and subsequently the section or directly a table. the example that i've seen show that if u create a new report u can create the reportbody, the section, the table and others. But don't show how to obtain this from an existing report.
Probably i don't understand very well all the SDK structure and i think that is possbile to read a table(with horizantal axis) in a report without section only passing by the ReportBody.
I know that u don't have so time to spent for things that are in the SDK, but if it's possible to have ten rows of sample about this question i'll be very happy.
If it's not possibile, thank u very much for your interesting and disponbility and i'll try again and again and again to solve this.
Matteo

Problem reading data from two tables

Hi experts,
I'm developing a JDBC - IDOC scenario that needs to read data from two oracle tables. I have created a BPM that has a initial fork for the two channels and it works fine.
The problem is that I need to read data from the first, two or both tables depending if there is data to read. If there is data in the two tables it works, but if only there is data in one of the two tables, I have read problems. I have tryed to set the 'neccesary branches' to 1 but this is a problem when I have data in both tables.
Any idea?
Best Regards,
Alfredo Lagunar.

Hi,
have your fork step inside a block and then right-click your block to insert a deadline branch to your BPM process and specify the time after which your BPM process should be cancelled.....so if in that time, you get data from both tables, your BPM will work okay otherwise if that time is over, then your BPM process will be cancelled.
Regards,
Rajeev Gupta

Reading data from table dased on time.......

Similar Messages

Maybe you are looking for