Reading Incumbent and Position data in SuccessionPlanning

Hi All:
I'm wondering if anyone else has experienced an issue with the SuccessionPlanning module where the organizational hierarchy can be viewed, and the position/holder names are displayed in the hierarchy view. However, when clicking on the position/holder for more information, the view details pane that comes up is unable to display little to no information about the holder or the position.
So, for instance, if I were to click on the Position box for the Janitor position which was held by John Doe, the pane that opens up for more details the position and the incumbent lists his name as "n/a n/a".
I likely have a broader issue, because my searches for all positions and all talents yield no results and the log file tells me the dataset brought back no results which just isn't possibe, but I'm a little stumped because I HAVE actually connected to SAP with my connection string and am able to retrieve some data. For instance, I can see that the position Janitor is connected to job Custodial Enginner, which reflects ECC. However, if I go to change the job the position is tied to directly in Nakisa, I can't get any jobs to show up in the dropdown for jobs.
The ID I'm using in my connection string is able to retrieve all this data if I were to log directly into ECC.
Anyway, that's kind of a lot of info and I see most of the questions on here are about the OrgChart module, but since I'm a little stumped, I thought I'd give it a shot. If anyone has come across this issue before, I welcome any feedback you can offer. I'm using TVN 2.0 on ECC 6.0 ehp4.
Thanks,
Chris

Chris,
I would strongly recommend installing Service Pack 1 (SP1) for SAP TVN 2.0 before you do anything more (especially if you haven't done any customisations yet). There is some very significant fixes in there.
You will find this on service.sap.com/support then follow:
SAP Support Packages ->
Support Packages and Patches - Entry by Application Group ->
SAP Solution Extensions by Partners ->
SAP Talent Visualization by Nakisa -> .... sure you can follow the rest from there.
There is a zip file with code and a PDF install guide in. Just follow the steps, it will take you 1-2 hrs I guess.
Hope that helps.
Stephen
[ROC|http://www.roc-group.com]

Similar Messages

Process Chain : Read PSA and Update Data Target in BI 7.0

Hello Experts,
In my Process Chain I have a variant Execute Infopackage to load the data only into PSA. then I have next variant as *Read PSA and Update Data Target*. my data target was a Master Data table Hierarchy
In the variant " Read PSA and Update Data Target". the selection Parameters were
PSA.Table : 0GLACCEXT_T011_HIER_BA1
Selection Object Type : same Infopackage in Varaint Execute Infopackage
the Error message was Variant doesnot contain a valid combination request/data target
I checked the PSA-Table using RSA1OLD Transaction then I find four PSA Tables:
0GLACCEXT_T011_HIER_BA1
0GLACCEXT_T011_HIER_BA2
0GLACCEXT_T011_HIER_BA3
0GLACCEXT_T011_HIER_BA4
All the requests are linked to PSA Table *0GLACCEXT_T011_HIER_BA4*.
I can't understand why there exists four PSA Tables?
I try to link the PSA-table 0GLACCEXT_T011_HIER_BA4 in the variant *Read PSA and Update Data Target and try to save it it raises short dump.
If I select 0GLACCEXT_T011_HIER_BA1 in the varaint I shouldn't face any problems.?
but the process chain raises an Error message Variant doesnot contain a valid combination request/data target with this variant.
How shall I handle this issue?
Please carify me the issues as soon as possible.
thanks in advance
Regards
sailekha

Hello,
In the Variant Read PSA and Update Data Target I have to select the PSA Tabelle Name from the preselection list in the System it shows me all the four PSA Tables that I mentioned.
I can select any one of them. So I trieed with all the four PSA Tables in the list but I can selct only the XXXX......BA1 table then only I can save and include it in the PC. If I select the remaining tables BA2, BA3, BA4.........while I try to save the Variant it raises short dump.
I checked the PSA using the Transaction RSA1OLD under PSA...... I find 4 PSA Tables( I don't know whether they are PSA Tables or not but in the Variant it states that they are PSA Tables) in which all the requests are attached to BA4. only.
I observed that ony for Hierarchies I find four PSA tables for remaining one only one PSA table was available.
I totally confused how to handle this situation. any suggestions......... please help me to resolve this problem.
Thanks & Regards

What is the best software programs that I can use to read, write and modify data / files on external HD (NTFS format i.e. Windows) ?

Hi guys,
I’m new to Mac and have a MacBook Pro Lion OS (10.6.8 I think !!!) with Parallels 7 (Windows 7) installed. Can someone please tell me what is the best software program that I can use to read, write and modify data / files on external HD (NTFS format) from the Mac OS ? I heard of Paragon and Tuxera NTFS. Are they free ? Are they good ? Are there any other software programs out there ? I heard that some people have issues with Paragon.
Thanks.

Your best bet would be to take the drive to the oldest/compatible with that drive Windows PC and grab the files off, right click and format it exFAT (XP users can download exFAT from Microsoft) and then put the files back on.
Mac's can read and write all Windows files formats except write to NTFS (and in some cases not read) so if you can change the format of the drive to exFAT (all data has to be remove first) then you will have a drive that doesn't require paid third party NTFS software (a license fee goes to Microsoft) for updates.
Also it's one less hassle to deal with too.
.Drives, partitions, formatting w/Mac's + PC's

BW 3.5 - Update to PSA only / Read PSA and Update Data Target

Hi Folks,
I am planning to use on a BW 3.5 data source and infopackage that loads to PSA only (as the source system job runs quite long and we would run other prepration loads in parallel before pushed to final cube). And then later in the process chain the process Read PSA and Update Data Target to load the data to final cube.
As we plan to run the process chain 3 times a day I was wondering if the Read PSA and Update Data Target always takes only the latest request loaded to the PSA (as it is always the same infopackage) or do we have to delete the PSA request at the end of each process chain run so that not the next run will load the PSA request again as it is still in the PSA?
Thanks for all replies in advance,
Axel

You are loading the Delta till the PSA, multiple times a day, and after each update to the PSA you will send the data to the Cube.
Once its there in the PSA, you are performing further tasks & then updating the cube multiple times (once after each delta)
Well, the 1st load to the cube should be OK.
But, from the next load onwards, it would pick up all the requests from the PSA & you will have wrong values in the Cube.
Because, i think, while using 'Read PSA & Update the Target', you can't set it for a FULL or a DELTA load.
It will bring in everything that exists in the PSA.
I would advice you to clean the PSA before the starting next Delta.
But, there is a counter argument.
If the data mart sign is reflected in the PSA for the request that has been loaded into the cube, then the next time the system will pick up the request which does not have a data mart symbol.
You can always give this a try in your Dev system.
Edited by: Vishal Sanghvi on Apr 1, 2011 1:58 PM

Missing Image Size and Position Data

In AI CS5 the size and position of an image were displayed in the top toolbar when you selected the image. This is missing in AI CS6, how can I get it back?

Well I did discover that what I need is called "Transform" but it's already checked in the menu you suggested. In fact EVERY box is already checked in that menu, and checking or unchecking them from that menu has absolutely no affect on anything anyway.
I found that I can expand one of the menus from the right side, and the "Transform" box is there, and that's fine. But that data (object size and position) was very useful when displayed on the top toolbar in CS5. Any idea how to make it appear in the top toolbar? It will un-dock (and is very difficult to re-dock)

Reading file and dump data into database using BPEL process

I have to read CSV files and insert data into database.. To achieve this, I have created asynchronous bpel process. Added Filed Adapter and associated it with Receive activity.. Added DB adapter and associated with Invoke activity. Total two receive activity are available in process, when tried to Test through EM, only first receive activity is completed, and waiting on second receive activity. Please suggest how to proceed with..
Thanks, Manoj.

Deepak, thank for your reply.. As per your suggestion I created BPEL composite with
template "Define Service Later". I followed below steps, please correct me if I am wrong/missing anything. Your help is highly appreciated...
Step 1-
Created File adapter and corresponding Receive Activity (checkbox create instance is checked) with input variable.
Step 2 - Then in composite.xml, dragged the
web service under "Exposed Services" and linked the web service with Bpel process.
Step 3 - Opened .bpel file and added the DB adapter with corresponding Invoke activity, created input variable. Web service is created of Type "Service" with existing WSDL(first option aginst WSDL URL).
and added Assign activity between receive and invoke activities.
Deployed the composite to server, when triedTest it
manually through EM, it is promting for input like "subElmArray Size", then I entered value as 1 with corresponding values for two elements and click on Test We Service button.. Ptocess is completing in error. The error is
Error Message:
Fault ID
service:80020
Fault Time
Sep 20, 2013 11:09:49 AM
Non Recoverable System Fault :
Correlation definition not registered. The correlation set definition for operation Read, process default/FileUpload18!1.0*soa_3feb622a-f47e-4a53-8051-855f0bf93715/FileUpload18, is not registered with the server. The correlation set was not defined in the process. Redeploy the process to the containe

Read PDF and pull data

Hi,
I have a requirement to upload PDF from local drive and search for particular line and move that particular line data into a internal table in a readable format.
Example:-->
I have pdf file ZTEST.pdf within the file on 10th line, we have external customer number in a specific length. I need to read this external customer number and update into a custom table.
Can anybody give a possible solution.
Thanks for your help
aRs

Convert the pdf to txt file by some system calls , then
upload it by CL_GUI_FRONTEND_SERVICES ,
Never tried it though..

Best way to read KEKO and KEPH data

Hi All,
I have to collect data from KEKO and KEPH.
I tried FM 'CK_F_KEKO_KEPH_READING'. but it takes a long time. Is there any better way to read that data. I have to collect data for multiple materials and multiple plants.
Thanks in advance..!

Try
CK_F_KEKO_KEPH_DIRECT_READ
CK_F_KEKO_KEPH_READING
CK_F_KEKO_KEPH_DIRECT_READ
also look at Function Group = "CK2U"
Hope thisll give you idea!!
Pl... award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

FileFormat: Reading transparency and color data separatley

I have a problem reading data via my file format plugin.
I can read the different layers in the format in Lab color mode (8-Bit).
In the file there is a layer transparency mask (1 byte for every pixel), which is stored right before the image data.
Currently I tried 2 approaches:
1.
- Set transparencyPlane to 3
- Set loPlane, hiPlane to 3
- Set colBytes to 1
- Set rowBytes to image width
- Set data to a buffer with size of image width
- read row from the transparency mask
-> advanceState gives error (-30500)
2.
- read transparency mask completely (I know, bad idea)
- Set transparencyPlane to 3
- Set loPlane = 0, hiPlane = 3
- Set colBytes to 4
- Set rowBytes to image width * 4
- Set data to a buffer with size of image width * 4
- read row from file in a temp. buffer
- copy values from temp. buffer and transparency for every pixel to the data buffer
-> advanceState ok but image ks not correct in PS
I think there must be another, better way to apply this transparency mask.
Thank you for your help....

Problem solved.
I forgot to tell PS the correct count of planes in the readStart selector.
So approach 1 was right.

Reading file from ftp server and importing data into table

Hi experts,
Well basically i have text files with different layout that have been uploaded on an ftp server. Now i have to write a procedure to fetch those files, read them and insert data in a table... can that be done?
your precious help would be greatly helpful.
Thanks

declare
file1 UTL_FILE.FILE_TYPE;
filename varchar2(1000) := 'GTECHFILES';
str long;
begin
file1 := UTL_FILE.FOPEN (filename,'agent_dump_csv.rep','r',32767);
loop
UTL_FILE.GET_LINE ( file1, str );
--dbms_output.put_line('Value is :'||to_char(str));
end loop;
UTL_FILE.FCLOSE( file1 );
exception
when no_data_found then
dbms_output.put_line('END OF FILE');
UTL_FILE.FCLOSE( file1 ) ;
when others then
UTL_FILE.FCLOSE( file1 ) ;
dbms_output.put_line('ERROR: '||sqlcode||':'||sqlerrm) ;
end;
i have managed to write this piece of code and all lines are being read and now i need to insert data into my table and the fields are seperated by a `|` i am strill trying to figure how to do that now. help ...
Edited by: Kevin CK on 17-Jan-2010 22:40

Read and Get Data from PDF

Hi All,
I am fairly new to programming macros in Excel VBA, and right now I need to write a macro that can open a PDF file and read it and get data from there and paste it into an excel spread sheet. Is this possible? If so can you give me some sample code
that would do that?

I did this once many years ago. I had to have Acrobat Professional installed ($$$). There are free pdf parsers that you access from VBA using Win32 commands like:
https://code.google.com/p/peepdf/
Maybe something has changed since I did it

Time and GPS data windows

Hello all
I was presented this sample 1080 frame and was asked if I can do this if time and GPS metadata were part of the video recording. In other words, how do you burn in this data in the video itself. I have P Pro CS 6 @ home and am a complete novice to video editing. Final product may or may not need this, more curious as to how its done - special camera system or in post processing?
Thanks!

If whoever shot the video recorded time of day timecode synced from a GPS receiver that was close to the camera (in your case that looks like it would mean mounted in the helicopter), you can use the time code data to match your GPS metadata to the video. I use an automated process to incorporate the the metadata into the video, but the process is all done with custom software that the CEO of our company wrote. The other people I've seen incorporating GPS metadata into video are also using customized, proprietary processes. If you're adding the data in post, you will have to translate the data into Premiere titles or After Effects text keyframes or something else that you can overlay on the video.
You can also use hardware during your shoot to overlay the GPS data onto the video. I don't use any products that do this, and I don't know how easy they are to find for purchase, but there definitely are people in the geospatial sector who feed video through a GPS-aware piece of video processing hardware that overlays time and position data in real time. In this case you would feed video (most likely through HD-SDI) from your camera to the GPS overlay hardware and then to a recorder.
There certainly aren't any GPS features built into Premiere Pro. If you want to add titles manually, you'll have to match the time code with your GPS data and make a new title each time the GPS info is supposed to update. GPS data is usually some form of table or spreadsheet with time, coordinates, and other positional data, so you can find the correct time in the video and make a title that includes the corresponding coordinates for that time. If you're doing this for more than a few seconds of video, it will be an unreasonably long and tedious process, but it is possible.

Exception Handling for OPEN DATA SET and CLOSE DATA SET

Hi ppl,
Can you please let me know what are the exceptions that can be handled for open, read, transfer and close data set ?
Many Thanks.

HI,
try this way....
DO.
    TRY.
    READ DATASET filename INTO datatab.
      CATCH cx_sy_conversion_codepage cx_sy_codepage_converter_init
            cx_sy_file_authority cx_sy_file_io cx_sy_file_open .
    ENDTRY.
READ DATASET filename INTO datatab.
End of changes CHRK941728
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      APPEND datatab.
    ENDIF.
ENDDO.

Creation and Modification dates for android file system

Hello all, I am working on a project and i noticed a particular scenario where i'm getting an error everytime i try to run the code below on my android device;
                var file:File=File.applicationDirectory.resolvePath("amf.js");
                var modDate:Date;
                var createDate:Date;
                 if(file.exists)
                        try
                                   modDate=file.modificationDate;
                                   credDate=file.creationDate;
                                   trace("Modification date: "+ modDate.toString()+"\nCreation date: "+credDate.toString());
                         catch(e:Error)
                                  trace(e.message+": Somehow android OS CANNOT READ mODIFICATRION AND CREATING DATES FOR FILES");
Every time i run this on Adobe AIR's Mobile emulator, the correct dates are show up properly(Possibly because the emulator is running on Windows) but when i switch the debug to the device, the statement in the catch block executes. The real error says "Error #3003: File or directory does not exist."
Am i missing something or is this a normal behaviour which i have to find a work around for? The modificationDate and the creationDate are all properties of the FileReference class which i didnt use to instanciate the file object because i wasnt uploading or downloading anything.
Any form of tip will be much appreciated.
Thanks.

I run into the same problem while working on some sort of file synching task.
Trying to read the file.modificationDate or creationDate results in an error: "Error #3003: File or directory does not exist."
I have obeserved that this only happens for files that were packaged with the app (and placed in the File.applicationDirectory).
Files that my app has downloaded and saved to the device (File.applicationStorageDirectory) do have a valid creation date and modification date.
Maybe the File.applicationDirectory has different rights?
Does anybody have a solution or workaround for this?

Table for equipement no,measurement position,date and counter reading diffe

hi,
i am looking for tables that could provide me following data :
1) equipement no,
2)measurement position(like working hours,idle hours etc.)
3)date and
4)counter reading difference
I have equipment no.
i have searched table imrg,imptt but not able to find the 2nd and 4th data
plz help

i gt the table IMRG and the field is CDIFF
but its of type F.i want to read it as numeric value that cud be presented to user how cud I

Reading Incumbent and Position data in SuccessionPlanning

Similar Messages

Maybe you are looking for