Reading Japanese Characters from Properties File

I am running on Windows 2000 (English). Can any one suggest on how to read Japanese Characters from a ".properties" file.
TIA

look at ResourceBundle and unicode encoding,
Jim

Similar Messages

Read last characters from a file

Hey All:
i'm a novice when it comes to powershell- but this is what i'm trying to do.
I have the following command-
gwmi-classwin32_computersystem|selectName|out-filec:\computername.txt
I want to then read the last three characters of the computername from the file. If there is a 'cleaner' approach
please enlighten me.
Thanks for all the help
-Matlock

Hi,
Here's a method you can use:
$name = (Get-WmiObject Win32_ComputerSystem).Name
$shortName = $name.SubString($name.Length - 3)
$shortName
EDIT: Show on the draw, see Tommy's response above.
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

Reading Japanese characters from a JSP/HTML form.

I have a JSP/STRUTS/WEBLOGIC/ORACLE setup. I am able to get Japanese characters in database to be shown on the screen ( html ). However the users now want to enter Japanese characters on the screen and want to save these unicode characters in DB. How should I go about it?
I am using html:text tag for the input fields in the JSP. No matter what I try I am getting invalid characters..Thanks in advance.

hi debo_nair,
if i am not mistaken the japanese characters might be getting stored in the database as '?????' and other junk characters....
well I used the following technique:
1.retrieve the string from the text field and
2.convert it using the following method...
new String getbytes("the string entered in the text field","ISO-8859")
3.Next , store the string in the database
the syntax may be incorrect but just refer to any java book to get the correct syntax
regds

I am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

hi TimoHahn,
i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
Root cause of ServletException.
java.lang.NullPointerException
at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

XSL-FO unable to read special characters from the XML file

Team,
please help on issue, when trying to read the text from XML file (Special characters like bullet). It is displaying as Question mark(?) in output in place of bullet..please proved any soultion.

The "?" signals a character set mismatch issue - http://www.oracle.com/technetwork/database/globalization/nls-lang-099431.html - between client and database software

How to read from properties file

Hi,
I am using JSR 168.
while creating a new portlet, a folder gets created with the name as "portlet". Under which is resource package and <PortletName>Bundle.java.
pls tell me how to read from .properties file.
waiting eagerly for some reply
Thanks & Regards,
HP
Edited by: user9003827 on Apr 13, 2010 3:42 AM

I think i have mixed it up :)
I have looked at it again and believe you are using regular JSP portlets.
Can you tell what you want to achieve by reading .properties file. Are you meaning the preferences of the portlet or what exactly are you trying to do?
Reading propertie files is easy:
// Read properties file.
Properties properties = new Properties();
try {
properties.load(new FileInputStream("filename.properties"));
String myKey = properties.getProperty("yourKey");
} catch (IOException e) {
}Edited by: Yannick.O on 13-Apr-2010 05:52

Does LabView program behave differently under Traditional Chinese version from regular English version. The program reads in numbers and characters from input files.

Does LabView program behave differently under Traditional Chinese version from regular English version. The program reads in numbers and characters from input files.

Hope this helps,
Ankita

Japanese characters from args giving question marks on Japanese OS

Hi,
We are internationalising our product to japanese, and one of the features is to be able to open a file containing japanese characters from a double click on a japanese windows OS.
The double click is set up in the registry, and indeed it works properly for most characters. There are a few characters though (unicode character 20060 among them) that it doesn't work for, and what happens is that between the double clicking of the file, and the command line name of the file to open ("%1" in the registry / args[0] in java), the character in question is converted into the literal character for "?" (ascii 63), and java can't open the file.
Testing wordpad directly with this character is fine, the file opens. I've written a simple C++ app and a simple JAVA app which fork wordpad with the fileName param passed to it from the registry, and it didn't open the file passed because of that character.
So our java application, a simple java program and a simple C++ program can't resolve the fileName passed to it because of this character.
The thing is, wordpad is using the same regedit method to get its parameters as we do ("appName.exe" "%1" in shell/open/command) and it opens files containing this character without a problem.
Any ideas on what I'm missing?
Thanks very much
Jack

Hi,
We are internationalising our product to japanese,
and one of the features is to be able to open a file
containing japanese characters from a double click on
a japanese windows OS.
The double click is set up in the registry, and
indeed it works properly for most characters. There
are a few characters though (unicode character 20060
among them) that it doesn't work for, and what
happens is that between the double clicking of the
file, and the command line name of the file to open
("%1" in the registry / args[0] in java), the
character in question is converted into the literal
character for "?" (ascii 63), and java can't open the
file.
Testing wordpad directly with this character is fine,
the file opens. I've written a simple C++ app and a
simple JAVA app which fork wordpad with the fileName
param passed to it from the registry, and it didn't
open the file passed because of that character.
So our java application, a simple java program and a
simple C++ program can't resolve the fileName passed
to it because of this character.
The thing is, wordpad is using the same regedit
method to get its parameters as we do ("appName.exe"
"%1" in shell/open/command) and it opens files
containing this character without a problem.
Any ideas on what I'm missing?
Thanks very much
JackUnicode 20060 belongs to an extended part of JIS Kanji code set and there can be many
applications or systems that do not support those characters. Shift_JIS doesn't and
EUC-JP use 24 bit code for representig those chars which, unfortunately, aren't supported
by most exixting apps.

Reading the data from excel file which is in application server.

Hi,
Iam trying to read the data from excel file which is in application server.
I tried using the function module ALSM_EXCEL_TO_INTERNAL_TABLE. But it didn't work.
I tried just reading using open data set and read data set it is giving junk characters.
Please suggest me if you have any solution.
Best Regards,
Brahma Reddy

Hi Narendra,
Please see the below code I have written
OPEN DATASET pa_sfile for INPUT in text mode ENCODING DEFAULT MESSAGE wf_mess.
CHECK sy-subrc = 0.
DO.
READ DATASET pa_sfile INTO wf_string.
IF sy-subrc <> 0.
EXIT.
else.
split wf_string at wl_# into wf_field1 wf_field2 wa_upload-field3
wa_upload-field4 wa_upload-field5 wa_upload-field6 wa_upload-field7 wa_upload-field8
wa_upload-field9 wa_upload-field10 wa_upload-field11 wa_upload-field12 wa_upload-field13
wa_upload-field14 wa_upload-field15 wa_upload-field16 wa_upload-field17 wa_upload-field18
wa_upload-field19 wa_upload-field20 wa_upload-field21 wa_upload-field22 wa_upload-field23
wa_upload-field24 wa_upload-field25 wa_upload-field26 wa_upload-field27 wa_upload-field28
wa_upload-field29 wa_upload-field30 wa_upload-field31 wa_upload-field32 wa_upload-field33
wa_upload-field34 wa_upload-field35 wa_upload-field36 .
wa_upload-field1 = wf_field1.
wa_upload-field2 = wf_field2.
append wa_upload to int_upload.
clear wa_upload.
ENDIF.
ENDDO.
CLOSE DATASET pa_sfile.
Please note Iam using ECC5.0 and it is not allowing me to declare wl_# as x as in your code.
Also if Iam using text mode I should use extension encoding etc.( Where as not in your case).
Please suggest me any other way.
Thanks for your help,
Brahma Reddy

Reading long text from excel file to an internal table

Hi
Can any body tell me how to read long text from excel file to an internal table.
When i am using this FM KCD_EXCEL_OLE_TO_INT_CONVERT then it is reading only 32 characters from each cell.
But in my excel sheet in one of the cell has very long text which i need to upload into a internal table.
may i know which FM or what logic i need to use for this problem.
Regards

Hi,
Here is an example program. It will upload an Excel file with two columns. You could also assign the Excel structure dynamically, but I wanted to keep the example simple. The main point is that the internal table (it_excel in this example) must match the Excel structure that you want to convert.
Remember, this is just an example to help you figure out how to properly use the technique. It will certainly need to be modified to fit your requirements, and as always there may be a better way to get the Excel converted... this is just one possibility that has worked for me in the past.
*& Report zexcel_upload_test *
REPORT zexcel_upload_test.
TYPE-POOLS: truxs.
TYPES: BEGIN OF ty_excel,
 col_a(10) TYPE n,
 col_b(35) TYPE c,
 END OF ty_excel.
DATA: l_data_tab TYPE TABLE OF string,
 l_text_data TYPE truxs_t_text_data,
 l_gui_filename TYPE string,
 it_excel TYPE TABLE OF ty_excel.
FIELD-SYMBOLS: <wa_excel> TYPE ty_excel.
PARAMETERS: p_file TYPE rlgrap-filename.
* Pass the file name in the correct format
l_gui_filename = p_file.
* Upload data from PC
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
 filename = l_gui_filename
 filetype = 'ASC'
 has_field_separator = 'X'
CHANGING
 data_tab = l_data_tab
EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 OTHERS = 17.
IF sy-subrc <> 0.
* MESSAGE ...
EXIT.
ENDIF.
* Convert from Excel into the appropriate itab
l_text_data[] = l_data_tab[].
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
 i_field_seperator = 'X'
 i_tab_raw_data = l_text_data
 i_filename = p_file
TABLES
 i_tab_converted_data = it_excel
EXCEPTIONS
 conversion_failed = 1
 OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ...
EXIT.
ENDIF.
LOOP AT it_excel ASSIGNING <wa_excel>.
* Do something here...
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM filename_get CHANGING p_file.
* FORM filename_get *
FORM filename_get CHANGING p_in_file TYPE rlgrap-filename.
DATA: l_in_file TYPE string,
 l_filetab TYPE filetable,
 wa_filetab TYPE LINE OF filetable,
 l_rc TYPE i,
 l_action TYPE i,
 l_init_dir TYPE string.
* Set the initial directory to whatever you want it to be
l_init_dir = 'C:\'.
* Call the file open dialog without multiselect
CALL METHOD cl_gui_frontend_services=>file_open_dialog
 EXPORTING
 window_title = 'Load file'
 default_extension = '.XLS'
 default_filename = l_in_file
 initial_directory = l_init_dir
 multiselection = 'X'
 CHANGING
 file_table = l_filetab
 rc = l_rc
 user_action = l_action
 EXCEPTIONS
 file_open_dialog_failed = 1
 cntl_error = 2
 error_no_gui = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 REFRESH l_filetab.
ENDIF.
* Read the selected filename
READ TABLE l_filetab INTO wa_filetab INDEX 1.
IF sy-subrc = 0.
 p_in_file = wa_filetab-filename.
ENDIF.
ENDFORM. " filename_get
Regards,
Jamie

Tomcat unable to read accented characters from MySQL

Folks,
Can anyone help with me this problem?
It seems that my version of Tomcat is unable to read accented characters from my MySQL Database.
I've checked in the Database and the characters are all correctly represented there. But when, in my servlet code, I do:
String author = results.getString("author_surname");If the String contains any accented character then the character shows as a '?'. (Even before it gets to the JSP - I'm writing the results straight to catalina.out).
Looking around these forums I found that some people suggested adding
?useUnicode=TRUE&characterEncoding=UTF-8;to the end of my jdbc url. As in:
<ResourceParams name="jdbc/connection">
//a whole load of other params
<parameter>
<name>url</name>
<value>jdbc:mysql://localhost:3306/bookshop?useUnicode=TRUE&characterEncoding=UTF-8</value>
</parameter>
</ResourceParams>inside my server.xml
But it doesn't seem to make any difference. In addition, I doubt I even need to use Unicode as the accents I need are only: �� etc.
(Incidentally, writing that line into my server.xml, tomcat complains that it should finish with a semi-colon. Is that correct? Even if I put in the semi-colon, it still complains!!)
Any suggestions on this would be much appreciated. Thank you.

user13109986 wrote:
HI,
From http://download.oracle.com/docs/cd/B10501_01/server.920/a96529/ch9.htm
My understanding is the JDBC Api converts the string from the database to UTF-16.. If so is there any way to disable the UTF-16 encoding at JDBC API?That's exactly what it's supposed to do. There isn't even any concept of what it would mean to disable that: Java characters are UTF-16 representations of Unicode code-points, so there isn't anything else it could do.
I still suspect the JDBC part is working correctly and your writing-to-file isn't. I found this quote in the Wikipedia article on Windows-1256:
Windows-1256 is a code page used to write Arabic (and possibly some other languages that use Arabic script, like Persian) under Microsoft Windows. This code page is not compatible with ISO 8859-6 and MacArabic encodings.So was there a particular reason you chose Cp1256 and not ISO-8859-6 as the charset to write to the file with?

Reading Japanese characters.

I am not able to read Japanese characters in Unicode in Sun machines. Has any body experienced this problem before. I hade a Shift-SJIS encoding file. I later ran the native2ascii -encoding SJIS on the file and when I bring up my application. I do not see the Japanese characters at all.
Thanks,

I have a file in Shift-JIS. I then compile using javac -encoding SJIS to let the compiler know that it is a Shift-JIS file. I am not able to get it running in Solaris machine. Do I need to do something different for this. I have JapStrings_ja.java file which has the strings in Shift-SJIS.
Thanks

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

Regarding reading the data from the files without using Stremas

hai to all of u...
here i have a problem where i have to read the data from the files without using any streams.
please guide me how to do this one,if possible by giving with an example
Thanks & Regard
M.Ramakrishna

Simply put, you can't.
By why do you need to?

Reading Japanese Characters from Properties File

Similar Messages

Maybe you are looking for