Reading List all changed to Top Site after Upgrade to Safari 7.0.5

Safari was upgraded to 7.0.5 a few days ago. Since then, all items on the Reading List, once click on, bring only the Top Sites.
Is there anything I can do to fix it?

Yes there is.
Run the malware removal tool here > The Safe Mac » Adware Removal Guide
Then quit and relaunch Safari.

Similar Messages

How do you stop top sites from loading in safari

I have tried for days to stop "Top Sites" from loading in Safari 7.0
In my ~Library I have locked the:
Safari db
metadata db
etc.
There is no way I can find to stop these crap top sites from loading!!!!!!!!!:(
Anyone found a way to fix this?

Never mind, I found out how to do it. However, you can't get rid of all the sites because in Safari 7.0, in the Preferences>General Tab, you can only change Top Sites to a minimum of six. So, you can't entirely get rid of them.

[SLOVED] All my USB not work after upgrade system.

Hello all,
I'm new in Arch, and i install my system with your LiveCD (2005).
In the first boot, all work good. But after upgrade (pacman -Syu), all my USB device (Keyboard, Mouse) not work.
I'm not using (yet) with Xorg, just in command shell (tty1), But i can't press anything cuz my keyboard not work.
I try to do that (https://bbs.archlinux.org/viewtopic.php … 19#p906119), but no work to me too.
What i can to do to fix this?
My dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf564000 (usable)
BIOS-e820: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
BIOS-e820: 00000000bf5bb000 - 00000000bf5db000 (reserved)
BIOS-e820: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
BIOS-e820: 00000000bf5ec000 - 00000000bf600000 (reserved)
BIOS-e820: 00000000bf600000 - 00000000bf602000 (usable)
BIOS-e820: 00000000bf602000 - 00000000bf603000 (ACPI data)
BIOS-e820: 00000000bf603000 - 00000000bf60b000 (reserved)
BIOS-e820: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
BIOS-e820: 00000000bf615000 - 00000000bf63e000 (reserved)
BIOS-e820: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
BIOS-e820: 00000000bf681000 - 00000000bf800000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x23f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 23F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009ec00 (usable)
modified: 000000000009ec00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf564000 (usable)
modified: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
modified: 00000000bf5bb000 - 00000000bf5db000 (reserved)
modified: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
modified: 00000000bf5ec000 - 00000000bf600000 (reserved)
modified: 00000000bf600000 - 00000000bf602000 (usable)
modified: 00000000bf602000 - 00000000bf603000 (ACPI data)
modified: 00000000bf603000 - 00000000bf60b000 (reserved)
modified: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
modified: 00000000bf615000 - 00000000bf63e000 (reserved)
modified: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
modified: 00000000bf681000 - 00000000bf800000 (usable)
modified: 00000000fed1c000 - 00000000fed20000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 000000023f800000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fcda0] fcda0
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 16000-1a000
init_memory_mapping: 0000000100000000-000000023f800000
0100000000 - 023f800000 page 2M
kernel direct mapping tables up to 23f800000 @ 18000-22000
RAMDISK: 37c44000 - 37e19ab8
ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
ACPI: XSDT 00000000bf5ae068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bf5b7ba0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bf5ae140 09A5C (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bf60cf80 00040
ACPI: APIC 00000000bf5b7c98 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bf5b7d10 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bf5b7e18 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000bf5b7e58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
(13 early reservations) ==> bootmem [0000000000 - 023f800000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00016d7b38] TEXT DATA BSS ==> [0001000000 - 00016d7b38]
#2 [0037c44000 - 0037e19ab8] RAMDISK ==> [0037c44000 - 0037e19ab8]
#3 [00016d8000 - 00016d826b] BRK ==> [00016d8000 - 00016d826b]
#4 [00000fcdb0 - 0000100000] BIOS reserved ==> [00000fcdb0 - 0000100000]
#5 [00000fcda0 - 00000fcdb0] MP-table mpf ==> [00000fcda0 - 00000fcdb0]
#6 [000009ec00 - 00000fca90] BIOS reserved ==> [000009ec00 - 00000fca90]
#7 [00000fcd24 - 00000fcda0] BIOS reserved ==> [00000fcd24 - 00000fcda0]
#8 [00000fca90 - 00000fcd24] MP-table mpc ==> [00000fca90 - 00000fcd24]
#9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
#10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
#11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
#12 [0000018000 - 000001d000] PGTABLE ==> [0000018000 - 000001d000]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023f800
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bf564
0: 0x000bf600 -> 0x000bf602
0: 0x000bf681 -> 0x000bf800
0: 0x00100000 -> 0x0023f800
On node 0 totalpages: 2092659
DMA zone: 56 pages used for memmap
DMA zone: 110 pages reserved
DMA zone: 3816 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765725 pages, LIFO batch:31
Normal zone: 17892 pages used for memmap
Normal zone: 1290780 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf564000 - 00000000bf5bb000
PM: Registered nosave memory: 00000000bf5bb000 - 00000000bf5db000
PM: Registered nosave memory: 00000000bf5db000 - 00000000bf5ec000
PM: Registered nosave memory: 00000000bf5ec000 - 00000000bf600000
PM: Registered nosave memory: 00000000bf602000 - 00000000bf603000
PM: Registered nosave memory: 00000000bf603000 - 00000000bf60b000
PM: Registered nosave memory: 00000000bf60b000 - 00000000bf615000
PM: Registered nosave memory: 00000000bf615000 - 00000000bf63e000
PM: Registered nosave memory: 00000000bf63e000 - 00000000bf681000
PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880008a00000 s89176 r8192 d21416 u524288
pcpu-alloc: s89176 r8192 d21416 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060321
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8167004k/9428992k available (3449k kernel code, 1058356k absent, 202696k reserved, 1818k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3311.105 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.13 BogoMIPS (lpj=11037016)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
Booting Node 0, Processors #1
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#2
CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#3 Ok.
CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
Brought up 4 CPUs
Total of 4 processors activated (26499.22 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20091214/nsinit-340)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfe707000-0xfe70700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfe706000-0xfe7063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfe705000-0xfe7053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 24: [io 0xf020-0xf02f]
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:03:00.0: reg 30: [mem 0xfe500000-0xfe50ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0x0400-0x0453] has been reserved
system 00:0b: [io 0x0458-0x047f] has been reserved
system 00:0b: [io 0x0500-0x057f] has been reserved
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [io 0x0454-0x0457] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem disabled]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [mem disabled]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem disabled]
pci 0000:00:1c.7: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:06:00.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 3 [io 0x0000-0xffff]
pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:07: resource 6 [io 0x0000-0xffff]
pci_bus 0000:07: resource 7 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1878k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000979e000 - ffff88000d79e000
software IO TLB at phys 0x979e000 - 0xd79e000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1304838033.699:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15956
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 20
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 20
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 20
pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:03:00.0: setting latency timer to 64
pata_acpi 0000:03:00.0: PCI INT A disabled
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-6: WDC WD1200JD-00GBB0, 02.05D02, max UDMA/100
ata1.01: 234441648 sectors, multi 16: LBA48
ata1.01: applying bridge limits
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA WDC WD1200JD-00G 02.0 PQ: 0 ANSI: 5
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: limiting SATA link speed to 1.5 Gbps
ata2.00: limiting speed to MWDMA2:PIO3
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: disabled
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2: EH complete
pata_via 0000:03:00.0: version 0.3.4
pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_via 0000:03:00.0: setting latency timer to 64
scsi4 : pata_via
scsi5 : pata_via
ata5: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 16
ata6: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 16
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb2 sdb3 sdb4 < sdb5 >
sda: sda1 sda2
sd 0:0:1:0: [sdb] Attached SCSI disk
sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sdb5): mounted filesystem with ordered data mode
<30>udev[901]: starting version 167
Adding 7030776k swap on /dev/sdb2. Priority:-1 extents:1 across:7030776k
Thanks a lots.
Last edited by KingYes (2011-05-08 11:03:55)

FYI, the latest installation CD version is "2010.05". It's best to use the latest. Get it from http://www.archlinux.org/download/
I'm not sure but I believe all other LiveCDs are custom made outside of the official Archlinux development team.
I recommend downloading the CD I mentioned and follow this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide
I've installed arch many times on different hardware and the only time I lost mouse and keyboard was after I removed "10-evdev.conf" and "10-quirks.conf" from /etc/X11/xorg.conf.d/. I copied both back from backups, rebooted and m&k were functional again. My guess is "10-evdev.conf" was the file I needed. Check both these files exist.

"Top Sites" capability GONE after upgrading to Safari 4.0.3

In a nutshell:
I've been running Safari 4.X June 09 with Top Sites becoming a key tool in everyday use, and a cool one at that. Top Sites worked on 15 August, did the minor rev upgrade from 4.02 to 4.03 on 16 August, and the Top Sites function is GONE on the 17th.
The rest of the story:
Upgraded to Safari 4.0.3 last night and to my dismay the TOP SITES function is now just GONE. No explanation, no warning, just "poof."
Read through the discussions, read through the support pages, took the immediate advice to reinstall...then tried the instructions for deleting select files under under com.apple.safari...et cetera...No Joy, 2 hours lost.
Read the discussions MORE CLOSELY and found this: http://support.apple.com/kb/HT3410
"Safari 4: Top Sites, Cover Flow features require compatible graphics card"
So Let me get this straight...I accept a minor rev upgrade, from 4.0.2 to 4.0.3, and LOSE functionality? Really, guys?
I lose the functionality, apparently, because the Intel GMA 950 is apparently not Quartz Extreme compatible.
Ok, then, riddle me this Batman: the support article above is dated June 2009. I've been running Safari 4.X since then with top sites working quite well under 4.0.2. My early adopted 2006 Mac Mini hasn't changed since it's manufacture.
What's going on? What am I missing? Anyone else seeing this?
G
P.S. From the Logs
Chipset Model: GMA 950
2009-06-11 16:59:26 -0600: Installed "Safari" (4.0)
2009-07-17 20:46:41 -0600: Installed "Safari" (4.0.2)
2009-08-16 22:44:21 -0600: Installed "Safari" (4.0.3)

Mikate,
Does your iMac have an Intel GMA 950 chipset? If not, then your comparison is not valid. If it does have the same chipset as my Mac Mini, then you may have eliminated a possibile cause. (same os + same chipset=reasonable assumption)
The central issues is still the loss of major functionality under a minor rev change.
What changed? The requirements for Top Sites to work? Then why did it work for me under 4.0.2? According to the article, Inel GMA 950 is not specifically named as supportable and therefore the function should not have worked at ALL when safari 4.0 was installed. NO Mac specific drivers from Intel at Intel's web site. Have NOT seen any under the apple support pages, but I could be missing them.
G

Gmail missing from top sites after closing Safari

This is becoming extremely frustrating. I constantly add Gmail to my top sites and pin it so it permanently remains there; however, once closing out of Safari it disappears. Anyone else having trouble with keep Gmail on their top sites?

I get the same thing...if I restart my computer or even quit and relaunch Safari, all my web-mail top sites are gone, replaced with the typical ever changing top sites. It only seems to do it with these types of sites, as all my other ones set to remain permanent always do.

No updates for Top Sites after PR 1.1 update

My 'Top Sites' list is never updated after PR 1.1.
I have permanently only 6 predefined Nokia pages visible.
I tried different web connections but problem remains.

Hi, I have a similar problem. The update seemed to run fine, but I also noticed no signal. I power cycled it and it gave me the plug into itunes screen, upon doing so I get a screen that says there is a problem with your iPhone, it may be damaged unable to activate. I just returned from the apple store and have been told that the IMEI numbers do not match. I was told the only was this is to happen is if the software has been altered "illegally". I have never ever hacked the phone or any other alterations to the software. I've done every official update released up until now and have never had a problem. They are now telling me to send it in and if they find that the software has been altered they will ship it back unrepaired and the warranty will be void. I will ship it in and see what happens. Hopefully this helps.

All of my top sites thumbnails in Safari are blank

My thumbnails on the top sites in Safari are blank, but the links works perfectly.
I've followed the suggestion in this thread without any result: https://discussions.apple.com/message/18343208#18343208
Resetting the cache has neither helped. I don't know what to do.
I'm using:
OSX Mountain Lion 10.8.2
Safari 6.0.2
Please see the picture.

Hi This is a bit late for an answer but I've just taken possession of a new MBP and was browsing the forums as I have a few issues too. On this topic my thumbnails werre all blank to start with but as I have used the sites they have slowly returmed until now they are fine. My issue is with Preview. I used to be able to combine PDFs after scanning but now? I'll need to post this question elsewhere methinks.
Hope things work out for you
Regards
Malcolm

How to change the Top sites in Safari 6.1 ?

the thing is, when I decided to update my Safari, it changed. I can't edit the Top sites because I can't find the oh-so-called 'edit' button.
so how can I change it??

This is how I did it using Safari 6.1.3:
Add the webpage you want to add to your Top Sites to your Bookmarks Bar by dragging the URL to the Bookmarks Bar.
Open your Top Site page and make sure your Bookmarks are open in your sidebar (View > Show Sidebar > Bookmarks)
Drag the webpage you added to your Bookmarks Bar in [1] onto the Top Sites page. The existing pages will move around and you can drop your webpage when you're happy with its position.
Hope it works!

My iPad wont save anything to reading list all of a sudden

I have tried saving pages from the Internet to my iPad reading list but it won't. Also pages I had saved has disappeared. What can I do????

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Why can't I change the Top Sites on Safari?

Seem unable to get Safari to save my website choices to Top Sites. I have tried deleting preloaded ones & loading and pinning my choices but reverts back when Safari closed down.

Hi ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following;
~/Library/Safari/TopSites.plist
Click Go then move the TopSites.plist file to the Trash.
Quit and relaunch Safari and try adding sites to TopSites.

How to undo Safari copying bookmarks, history, favorites, and reading list from Macbook Pro to iMac after Yosemite update?

I just updated my iMac 27inch Mid 2011 to Yosemite 10.10.2. I have a Macbook Pro that I primarily use for everyday stuff. I upgraded to Yosemite a while ago on my macbook. Now that I upgraded my iMac, it transferred everything saved in Safari on my macbook pro to my iMac. My favorites, history, bookmarks, and reading list were copied over. This is driving me nuts! I had a separate set of data saved on the iMac because I use it for different purposes. All of the original bookmarks, favorites, history, etc. on my iMac are now gone. I logged out of iCloud (which was a feature I did not enjoy when upgrading to Yosemite) yet all of the safari data from my laptop is still cloned onto my iMac. Please tell me there is a way to undo this or refresh safari pre-Yosemite update!
Thank you!

Then there's no way to recover the lost data. You will lose every bit of data you have if you don't start backing up.
Mac Basics: Time Machine backs up your Mac - Apple Support

Safari forgets some Top Sites after closing

Hello!
My Safari always seems to forget the Top Sites I set.
I have set all twelve Top Sites with my favorite Webpages.
When I quit Safari and start it again in the last row of Top Sites two of my favorites are gone and have been replaced by other randomly chosen Webpages.
I already tried to reinstall Safari by deleting the App and loading it again from apple.com.
I also deletet the TopSite.plist files and tried to reset Safari. None of these things worked.
Its funny though, that when I take a look inside the .plist the top sites are correct and in the correct order. Safari just doesn't display them correctly.
Does anyone have an idea? I like the Top Sites feature really a lot but its behavior right now is quite annoying.

Hi,
Quit Safari.
Go to ~/Library/Preferences. Move the com.apple.safari.plist file to the Desktop.
Relaunch Safari. Try Top Sites.
If that didn't help, move the .plist file back to the Preferences folder.
Carolyn

OX MAVERICK -Can a list of TOP SITES thumbnails visited on Safari be prevented from being displayed when open up Safari

Since upgrading my Mac's OS X Mountain Lion to 'Maverick', each time I start up Safari it provides thumbnails of sites previously visited under heading: 'TOP SITES'.
Can this be pevented so just the search engine is displayed upon start up of Safari eg. AOL or GOOGLE?

I have solved it thanks -
Click on SAFARI (screen's top left corner) > PRIVATE BROWSING

HT5364 How do I recover a site onto the top sites after removing it?

When you hover over a top site, a menu shows that can pin the site as a permanent top site and it can "never include as top site" does never mean never ever? How do I get it back? I dont want to reset safari either.
Thanks

The eventual solution came about when I was bookmarking a random page using ⌘D or the + button left of the url bar. I noticed one of the options of where to keep the bookmark is Top Sites; when I tried to do this with Gmail, it worked!
Thanks to original poster

Unable to use certain sites after upgrading to iOS 8.0.2

After upgrading (unintentionally) to iOS 8.0.2 I can no longer use certain sites that I regularly used previous to the upgrade. The bookmarked signon page comes up and is pre-populated with my userid and password. However the ipad does not respond when I touch the "logon" button on the screen. The screen is not responsive...almost seems frozen. This upgrade is useless to me if I cannot use these sites. Anyone else having these issues? Any solutions?

I do not have any issue in using Lync 2013 on my iPhone 6plus. Our corporate IT has solved the problem; I am not aware what all changes they had to do in the Lync server.

Reading List all changed to Top Site after Upgrade to Safari 7.0.5

Similar Messages

Maybe you are looking for