Reading project... stops at 28%

Just installed Leopard to a new volume, and hat all Application files transferred to it during the install. Final Cut Pro works with the exception of one (the most important one!) project. When trying to open it, it stalls at 'Reading project... 28%'. Always at 28%. Tried with some auto-save files, same thing. Any ideas? Would assume it has nothing to do with the Preferences, as they're brand new as a result of the install of the new OS to the new volume.
Thanks!

Unmount your media volume and then open that project. Does it open? If so, you have a corrupted media file, probably a render file.
(But make sure you unmount all media volumes, so that no media files for that project are mounted.)
EDIT: It could also be caused by a filter on a clip that isn't being loved by the OS for some reason.

Similar Messages

  • My iMovie '08 project stops exporting without notice.

    Here's my dilemma.
    I have a 40GB video that I've edited in iMovie '08 (my Mac is quite old but it still runs fine...).
    I'm running the project through my external harddrive that has plenty of space - over 950 GB.
    I exported it through Quicktime with the settings:
    Movie --> AVI (DV/DVPRO - NTSC) --> FPS 29.97 --> Best quality
    Audio set to 48000 Hz
    I have tried it THREE different times, each with a slightly different setting such as audio compression settings or even FPS, and all three times, the project stops at 33-34 GB. There is no warning, just that when I check iMovie, it LOOKS like my export was complete, but when I check the actual file, it's incomplete. The initial exporting progress looks fine. The blue bar is moving steadily and the time remaining sounds correct. I have run through the project to see if there were any flaws that would contribute to the export being halted, but found nothing. So what am I doing wrong or why is iMovie giving me so much trouble?

    Welcome to the  Discussion Forums
    clip-2008-11-21 18; 37; 22 1 is not conventional nomenclature for imported clips, it seems as though this clip may have been imported twice and one of the copies deleted after it has been used in the project. Have you looked in the events folder for such a clip.

  • Sharing to DVD all my projects stops att 66 % - without error messages.

    Sharing to DVD all my projects stops att 66 % - without error messages.
    I'm a beginner in Final Cut Pro X. Not good at ¨computer terms¨ and computers so please take it easy when explaining.
    My first three project was succesfully . (I then had no background image.)The fourth project (about 59 minutes) was at first successfully even with a background image. (But when I played the DVD on my DVD-player it stopped completely after 45 minutes, but went on when I tried to play it again, from the place where it stopped.) Then I replaced the background image with another and after that it stopped at 66 %. I read about the error -29 and made my image ¨smaller¨  but nothing happened. I also made the project shorter, about 57 minutes, nothing happened.
    I tried a couple of completely new project from 2 – 20 minutes long – the same happened, it stopped at 66 %. (Read about deleting render files and tried that too without results.)  I have a Mac OS X 10.8.3 Mountain Lion
    Grateful for help after a week with problems. It’s a dancing project and people are waiting for the DVD…

    "What finally got it to work for me was Share>DVD>Settings>Backround; added a small jpeg, then removed. For whatever reason, it seemed to jar Create Disk awake."
    Using this idea I didn't even add or delete an image, just opened the the Background window and closed it again.
    This made one stubborn Project work/burn even with some retimed clips in it.
    This action must flick an internal ON switch somewhere????
    It's something simple but annoying. I have no idea where to look.
    At least with a couple of extra clicks it's now working as expected.
    Annamatilda might try the same to confirm the above??
    Al

  • Aggregated project stopping dead at the exact same spot-Cap5

    at a recent offsite training, a project stopped loading approximately half way through at exactly the same place for everyone. We were accessing via the web and as the segments would steadily appear in the TOC, they all stopped loading at the same point. When completing the last loaded segment, there would be no movement to the next segment because it simply wasn't there. The connection was fast enough to eventually load the entire project, as it worked fine from my laptop. I had not seen this problem elsewhere, so it must be a local setting on the machines at this facility, but I can't figure out what it would be.
    I loaded the files to the desktops and the project ran fine locally, but when accessing from the web, it literally stopped dead at the same point for everyone.
    Thoughts?

    Actually I have come across the reason that pixel shows up:
    Apparently it resembles the top left corner of a DivX video on another tab. I have opened a video twice and scrolled to different positions on that page, and opening a third page that doesn't contain any DivX video shows multiple of these dots there.
    I have attached a partial screenshot showing those particular two pixels, marked in green.

  • Error reading project file : no protocol

    I have followed the instructions exactly as in the j2ee tutiorial ,but, when I run asant , an error occurs:
    : Error reading project file : no protocol: ../../common/targets.xml
    Urgent!

    Could you please provide a bit more detail such as which sample you are using? Also are you using the latest version of the tutorial and have you configured your build.properties in the samples/common directory?

  • I am having a problem opening pdf document.  I get error message: "Adobe Reader has stopped working"

    I am having a problem opening pdf document.  I get error message: "Adobe Reader has stopped working" then I get Windows is looking on line for a solution, but then my document closes. I tried uninstalling and reinstalling Adobe Reader XI, rebooted my computer but this did not help.  I get the same message. What to do?

    Can you open Reader by itself?  If so, check if disabling Protected Mode improves the situation [Edit | Preferences | Security (Enhanced)].

  • Adobe reader has stopped working, any solutions?

    I am having an issue with Adobe reader X.
    I open the program and it works normally, nothing to repport.
    Each time I close the program I receive the error message "Adobe Reader has stopped working)
    I am on Win 7 (32bit) SP1
    any ideas/solutions for this situation?
    Thank you in advance

    I have been having this problem recently (Vista HP fully updated 32 bit) with Reader X. This was a clean install and no 3rd party reg cleaners etc have ever been used. I use Microsoft Security Essentials.
    This problem seems intermitent. Yesterday it happened nearly every time I closed a pdf. Today it hasn't done it once so far. When the problem first happened a week or so back I tried the solutions offered (turn off protected mode) and it did not work. I tried "repair Adobe install" and that too did nothing. Windows problem reports keep saying Adobe updates available... they are not.
    Apart from the message saying that it crashed on closing there is no outward sign of anything amiss. I did however open task manager while the error box was still displayed and it showed two Adobe processes as still running. When I used the error box option to "close program" these processes ended.
    I can't help but feel these problems coincided with a recent round of updates although that may of course, be just that, a coincidence.

  • Adobe reader has stopped working error message after installing reader XI on windows 7

    Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
    Does anybody know why ?

    Dear Pat,
    Thank you for your reply.
    It is Ver. 11.0.06 for Acrobat XI
    No, I can't open the Reader at all.  The error message box popped up immediately when I run the Reader

  • Adobe Reader 11 stopped working and now will not install

    For some reason my Adobe Reader 11 stopped working today when I tried to use it so I figured I would try to re-install it. Well, re-installing it helped none. The same error keeps re-occuring. Here is a screenshot of the error message I keep getting:
    http://i45.tinypic.com/16ovpy.png
    Any solutions?
    Thanks!

    You can try using this tool to remove all traces of Reader:
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then, you may download the offline Reader installer from
    http://get.adobe.com/reader/enterprise/
    After downloading, restart your computer and run the installer before doing anything else.

  • Adobe reader has stopped working

    Need help opening my pdf files. I keep getting a crash error that states "Adobe Reader has Stopped Working"

    Try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

  • Adobe Reader has stopped working on closing Version XI (11.0.2.0)

    Everytime I use Adobe Reader, after closing a pdf, I get the error "Adobe Reader has stopped working"
    I have tried uninstalling and reinstalling.
    I have tried turning off enhanced security.
    I have tried going to the eula.exe and accepting.
    None of this has fixed the problem.
    I get the following details:
    Problem signature:
      Problem Event Name:   APPCRASH
      Application Name:         AcroRd32.exe
      Application Version:       11.0.2.0
      Application Timestamp:               511eacd6
      Fault Module Name:      AcroRd32.dll
      Fault Module Version:   11.0.1.36
      Fault Module Timestamp:            50d0b924
      Exception Code:             c0000005
      Exception Offset:           00037b9a
      OS Version:       6.1.7601.2.1.0.256.48
      Locale ID:          1033
      Additional Information 1:            0a9e
      Additional Information 2:            0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:            0a9e
      Additional Information 4:            0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    I am running Windows 7 Professional SP1 64 bit.
    Thanks!

    http://forums.adobe.com/thread/1284475?tstart=0

  • Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working

    Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working. A problem has caused the program to stop working

    Which Operating system you are using?
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)] and then try to open the file.

  • 'Adobe Reader has stopped working' error message

    I've recently updated from Adobe Reader X to Adobe Reader XI using Adobe Cleaner and installer from the website. Whenever I open a pdf file or start the Reader the following error occurs and closes the program: 'Adobe Reader has stopped working'. This message would never occur when I had version X. Moreover, it doesn't occur in any other program I use so far. I've disabled Protected Mode and run Eula.exe, but that didn't help. Here are some details from the event log
    Faulting application name: AcroRd32.exe, version: 11.0.6.70, time stamp: 0x52b528e2
    Faulting module name: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83c8a
    Exception code: 0xc06d007e
    Fault offset: 0x0000c41f
    Faulting process id: 0xb30
    Faulting application start time: 0x01cf6ad78a3eba02
    Faulting application path: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
    Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
    Report Id: d4e22774-d6ca-11e3-ba2e-e9455936eb49
    What should I do to fix the error?
    Please, help me resolve this issue.

    Duplicate of https://forums.adobe.com/thread/1469330

  • I suddenly am unable to open attachments on received email. Get message Adobe Reader has stopped working. What do I do?

    My last two emails received this week have attachments which will not open, previously was fine. Get message "Adobe Reader has stopped working. Windows will close the program and notify you if a solution is available" But I never hear any more. What is wrong?? Thank you

    Please see if the solution posted in the KB article below works for you:
    http://kb2.adobe.com/cps/928/cpsid_92870.html

  • Adobe reader has stopped working when opening tracker [vista & reader x]

    Hello all,
         I'm a developer and im constantly uninstalling and reinstalling reader x and acrobat pro x, but i typically have both installed.  Recently, i uninstalled both reader x and acrobat x via Add/Remove Programs in windows Vista, and then later reinstalled them both, and now when i click the adobe tracker icon in my systray, it says adobe reader has stopped working.  I've tried uninstalling, reinstalling and then rebooting, but that doesn't seem to help.  Event viewer says:
    Faulting application AcroRd32.exe, version 10.0.1.434, time stamp 0x4d456f48, faulting module mshtml.dll, version 9.0.8080.16413, time stamp 0x4d4cefa9, exception code 0xc0000005, fault offset 0x002be0d0, process id 0x1674, application start time 0x01cc04f02e5354a8.
    Any help would be great.
    Thanks!

    This is strange. Can you try a couple of things:
    1. Try launching Tracker in Acrobat. In Acrobat X, you will find it in Comment pane->Review->Track Reviews
    2. Launch Reader in non-sandbox mode. For this, launch Reader and uncheck the option 'Enable Protected Mode at startup' in Reader Preferences->General. Close and re-launch Reader. Now launch Tracker.
    Does it still crash in both the cases?

Maybe you are looking for

  • Importing via iMovie?

    I want to take parts from DVD's made by recording from television, edit them and write them to a new DVD. The DVD's I want to take parts from for editing in iDVD are in 'TS' format, i.e. opening the DVD in Finder shows one folder called 'VIDEO_TS' an

  • No signal on mixer on any channel?

    Hi... One minute my track was going fine the next minute there is no sound, no signal from any of the channels. I have checked the audio output is correct. (itunes and other apps working) I have loaded an earlier version of my project and this plays

  • Rights for all table

    Hi, I have a Role with the name siud_Data (select, insert, update, delete in shema Data). When a User has this Role, he can Select, Insert, Update and Delete in the shema Data. Now i have the problem that evry time i create a table in Data i must gra

  • Download error in Safari

    The thing is I have to create an excel sheet and make the file avaiable for clients as download. The code for that is -- The code is working perfectly in firefox, ie and chrome. But in safari the file is downloaded with the name of the page in which

  • Unable to create an iTunes account

    When I try and create an Itunes account, I receive a notice: "Item Not Available: My date & Time settings are correct, how can get my computer to accept cookies from iTunes?