Reading result table using LDB and event get payroll

Hi Technical experts,
I need help regarding reading cluster RT using logical database pnp and event get payroll.
Please help me out.
Best Regards.
Priyaranjan

Suresh, I also have one more question.
If I use GET pernr or GET payroll inside a subroutine after start of selection, it gives error saying "Before the statement "GET" , the structure introduced by FORm shuld be ended by END FORM, which is already ended correctly.
When I move the Get events outside the subroutines, i dont get this error.
Does that mean, these events cannot be used in the subroutines?

Similar Messages

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

I am trying to upgrade to itunes 10.7 using windows and keep getting the following error message: "Error writing to file: C:\Config.Msi\364460.rbf Verify access to this dierctory". Help!

I am trying to upgrade to itunes 10.7 using windows and keep getting the following error message: "Error writing to file: C:\Config.Msi\364460.rbf Verify access to this dierctory". Help!

Fixed! (win7 64 bit)! Just stop your antivirus during the upgrade/installation (I've got Kaspersky).
Good luck!

So now i might ned u all help, currently im using ipad and i get some news abt ios 6.1 and im interested abt it so i updated wif my Ipad (ver. ios 5) and i checked some web said ipad1 cnt update to ios6 so i might ned u all help how to restore bck to ios5

so now i might ned u all help, currently im using ipad and i get some news abt ios 6.1 and im interested abt it so i updated wif my Ipad (ver. ios 5) and i checked some web said ipad1 cnt update to ios6 so i might ned help how to restore bck to ios5 as normal be4

If it's showing the connect to iTunes screen then you will need to do that.
But Apple don't provide any method to update the first gen iPad to iOS 5 (nor do they support downgrading the iOS version).

Flash player on the new mac sarafi can't use keyboard and event listener

flash player on the new mac sarafi can't use keyboard and event listener
cn:英文有些差不好意思，附上中文说明：在flash player web 开发时，我在最新版本的sarafi上，目前出现不能响应键盘事件bug,为了验证是不是我本地问题，我也用在多款别的网页游戏上进行测试，全有这个bug，另外，有时还有那个fp弹出本地缓存提示设置窗口也点不了“允许或拒绝“那些按钮

Now after 5 weeks, you have always not resolved this very important and urgent issue. It seems that Adobe has realy abandonned the actionscript / flash player projects. Why not simply discontinue flash player on desktops too ? Or even better remove or block "automaticaly" all flash players with the final update. That could create a serious issue on the Internet for few weeks but at least that will be honorable end like a Samurai's Seppuku...

How to pick max value from a column of a table using cursor and iteration

Hello Everybody
I have a table loan_detail
and a column in it loan_amount
now i want to pick values from this table using cursor and then by using iteration i want to pick max value from it using that cursor
here is my table
LOAN_AMOUNT
100
200
300
400
500
5600
700i was able to do it using simple loop concepts but when i was trying to do this by using cursor i was not able to do it .
Regards
Peeyush

SQL> SELECT MAX(sal) Highest_Sal,MIN(sal) Lowest_Sal FROM emp;
HIGHEST_SAL LOWEST_SAL
       5000        800
SQL> set serverout on
SQL> DECLARE
2    TYPE tmp_tbl IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
3    sal_tbl tmp_tbl;
4    CURSOR emp_sal IS
5      SELECT sal FROM emp;
6    counter INTEGER := 1;
7 BEGIN
8    FOR i IN emp_sal LOOP
9      sal_tbl(i.sal) := counter;
10      counter := counter + 1;
11    END LOOP;
12    DBMS_OUTPUT.put_line('Lowest SAL:' || sal_tbl.FIRST);
13    DBMS_OUTPUT.put_line('Highest SAL:' || sal_tbl.LAST);
14 END;
15 /
Lowest SAL:800
Highest SAL:5000
PL/SQL procedure successfully completed.
SQL> Even smaller
SQL> DECLARE
2    TYPE tmp_tbl IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
3    sal_tbl tmp_tbl;
4    CURSOR emp_sal IS
5      SELECT sal FROM emp;
6    counter INTEGER := 1;
7 BEGIN
8    FOR i IN emp_sal LOOP
9      sal_tbl(i.sal) := 1;
10    END LOOP;
11    DBMS_OUTPUT.put_line('Lowest SAL:' || sal_tbl.FIRST);
12    DBMS_OUTPUT.put_line('Highest SAL:' || sal_tbl.LAST);
13 END;
14 /
Lowest SAL:800
Highest SAL:5000
PL/SQL procedure successfully completed.
SQL> Edited by: Saubhik on Jan 5, 2011 4:41 PM

How to use training and event functionality in ESS BP in ep 7.0 ?

Hi all,
 We are using
1). sap portal 7.0 sp 9 and
2). Using back end ECC 6.0
3). And using Ess business package
Business Package for Employee Self-Service (mySAP ERP) release 1.0
The business package doesnot contain any training and events module iviews.
We want to use training and event management iviews on the portal.
The document for this business package says that to use training and event management iviews we should install Sap Learning solutions
I want to know?
1. How can we use training and event management iviews without using Learning solutions?
2. What is actually Learning solutions is a seperate module or it is the part of Sap HR module?
Please guide me..
Rajendra.

Rajendra,
Have a look at SAP Note 870126.
Here is a snippet:
The following international ESS applications based on Standalone ITS have been or will be converted to the integrated ITS Version 6.40, and can still be used with mySAP ERP 2005. You can integrate these applications using ESS Homepage Customizing if required:
International ESS Services available on the integrated ITS as of mySAP ERP2005:
Training Center (PV7I) (see Note 771196)
myBookings (PV8I) (see Note 771196)
To answer the second part of your question, the Learning Solution is an optional component that can be deployed in ERP. It complements and extends the existing TEM module. You generally still use TEM with LSO.
Is that what you were after?
Regards,
John

Using View Tables in SQ01 and SQ02, getting 'Not Authorized to Read Table'

We are trying to use a SAP Standard View Table (CAUFV) in an SQ01 and SQ02 transaction. Even though there is no Authorization Group assigned to the View we still get "You have no authorization to read table caufv' when running the linked transaction. We tried assigning the CA and KA authorization groups to the role and got the same results. (The tables used to create the View are AFKO and AUKF and thier Authorization groups are CA and KA.) We tried other views and received the same results. Does anyone have any experience with this?

Hello Chuck,
There are 2 ways to restrict this
1: The user should be a part of at least one user group to run the corresponding ABAP query. This automatically restricts the access of the user to specific functional areas, and thus the corresponding underlying logical databases.
2: The authorization object S_QUERY should be used to give proper authorizations to the user for a query. This authorization object has a field named ACTVT, which can take values 02 for Change, 23 for Maintain and 67 for Translate.
This value determines whether the user can create and modify the query. The possible authorizations in the object are as follows:
S_QUERY_ALL Change, maintain and translate query
S_QUERY_UPD Change and Translate

Reading Locked records from HR table using LDB PNP

Hi,
I am trying to read the table pa0168 using LDB PNP.
But the problem is that get pernr staement does not retrieve locked records i.e where PA0168-sprps eq "X'.
Can anybody help me with this.
I have to use LDB so i don't want a solution of writing a select * for the pa0168 table.
hence i have to use get pernr statement but it should also retrieve locked records.
how can i achieve that.? please help
Thanks
GT
Message was edited by: GT

Hi GT,
In the START-OF-SELECTION event, set the parameter value
pnp-sw-ignorelockedrecords = 'N'.
Good Luck,
Suresh Datti
( Pl award points if the answer helps you )

Reading XML file using BAPI and then uploading that xml file data into SAP

I am getting a xml file from Java server. I need to take
data from this file using BAPI and need to upload into SAP using SAP.
Please tell me how to read XML files using BAPI's.

SDIXML_DATA_TO_DOM Convert SAP data (elementary/structured/table types) into DOM (XML
SDIXML_DOM_TO_XML Convert DOM (XML) into string of bytes that can be downloaded to PC or application server
SDIXML_DOM_TO_SCREEN Display DOM (XML)
SDIXML_DOM_TO_DATA
data: it_table like t001 occurs 0.
data: l_dom TYPE REF TO IF_IXML_ELEMENT,
 m_document TYPE REF TO IF_IXML_DOCUMENT,
 g_ixml TYPE REF TO IF_IXML,
 w_string TYPE XSTRING,
 w_size TYPE I,
 w_result TYPE I,
 w_line TYPE STRING,
 it_xml TYPE DCXMLLINES,
 s_xml like line of it_xml,
 w_rc like sy-subrc.
start-of-selection.
select * from t001 into table it_table.
end-of-selection.
initialize iXML-Framework ****
write: / 'initialiazing iXML:'.
class cl_ixml definition load.
g_ixml = cl_ixml=>create( ).
check not g_ixml is initial.
write: 'ok'.
create DOM from SAP data ****
write: / 'creating iXML doc:'.
m_document = g_ixml->create_document( ).
check not m_document is initial.
write: 'ok'.
write: / 'converting DATA TO DOM 1:'.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
 EXPORTING
 NAME = 'IT_TABLE'
 DATAOBJECT = it_table[]
 IMPORTING
 DATA_AS_DOM = l_dom
 CHANGING
 DOCUMENT = m_document
 EXCEPTIONS
 ILLEGAL_NAME = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
check not l_dom is initial.
write: / 'appending DOM to iXML doc:'.
w_rc = m_document->append_child( new_child = l_dom ).
if w_rc is initial. write 'ok'.
else. write: 'Err =', w_rc.
endif.
visualize iXML (DOM) ****
write: / 'displaying DOM:'.
CALL FUNCTION 'SDIXML_DOM_TO_SCREEN'
 EXPORTING
 DOCUMENT = m_document
 EXCEPTIONS
 NO_DOCUMENT = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
convert DOM to XML doc (table) ****
write: / 'converting DOM TO XML:'.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
 EXPORTING
 DOCUMENT = m_document
 PRETTY_PRINT = ' '
 IMPORTING
 XML_AS_STRING = w_string
 SIZE = w_size
 TABLES
 XML_AS_TABLE = it_xml
 EXCEPTIONS
 NO_DOCUMENT = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
write: / 'XML as string of size:', w_size, / w_string.
describe table it_xml lines w_result.
write: / 'XML as table of', w_result, 'lines:'..
loop at it_xml into s_xml.
 write s_xml.
endloop.
write: / 'end of processing'.
end of code
Hope this will be useful.
regards
vinod

Difference in results while using .CHILDREN and .ALLMEMBERS

Hi,
I have two almost similar MDX queries, in one I am using .CHILDREN and in other .ALLMEMBERS. First one returns no rows, the second one returns two. Please help me in understanding why!
Query 1
select
[Measures].[Claim As Of - Count] on 0,
[Accident Date].[Year].allmembers on 1
from [AW Cube]
where [Accident Date].[Year-Quarter-Month-Date].[Year].&[2010]
---NO rows
Query 2
select
[Measures].[Claim As Of - Count] on 0,
[Accident Date].[Year].children on 1
from [AW Cube]
where [Accident Date].[Year-Quarter-Month-Date].[Year].&[2010]
--2 rows
---- Claim As Of - Count
--All 637,350
--2010 637,350
TIA,
Sourav
EDIT: Some clarifications: AccidentDate is one of the Dimensions in my Cube [AW Cube]. Year is a natural hierarchy while [Year-Quarter-Month-Date] is an user defined hierarchy. [Year-Quarter-Month-Date] is created in the below way: Year-->Month--->Quarter--->Date.
So 'years' can be obtained by doing [Accident Date].[Year-Quarter-Month-Date].[Year].members and also [Accident Date].[Year].MEMBERS. Hope I am clear.

Well, got the answer myself.
Actually every ".CHILDREN" gets internally translated to ".CURRENTMEMBER.CHILDREN"
Now, [Accident Date].[Year].&[2010] is the corresponding value for the slicer on user defined hierarchy.
Here,
"[Accident Date].[Year].CHILDREN"
actually gets translated to
"[Accident Date].[Year].&[2010].CHILDREN"
which is basically an empty set. Hence, Voila! The empty result set!

Xcelsius Dashboard on SAP R/3 Table using BSP and XML Mapping

Hi Experts,
I have developed a simple dashboard on small data set (10 records) that I am fetching from a R/3 Table into BSP and generating XML from there and consuming it in Xcelsius (SAP R/3 + BSP + XML Mapping).
Now I want to fetch data based on Variables values that should be passed from the dashboard at the runtime and should display the data accordingly. Any help on how it can be achieved?
Thanks..!!
Sharad

Hi,
You could try doing this by using XML data connection. You would have to make use of Enable load to get the data from XML and Enable send to send data back to XML from dashboard.
This would require you to write a script.
Thanks,
Amit

How do I use CreateBookmarksFromGroupTree and NOT get a "temp_" for my top level?

I have a report that I have created that uses uses groups and I wanted export a PDF using the CreateBookmarksFromGroupTree option. While that works, I get an ugly top level bookmark name that starts with "temp_" then followed by two GUIDs "temp_13fef8e3-30ec-4bc5-ba77-b55d23c95e8f {87823BCB-7789-407C-8A7F-5096BE07A83E}".
So, how do I:
1) Get rid of this top level so it matches the Crystal Viewer (which has multiple top level bookmarks)
2) Put in a name of my own choosing as the top-level bookmark.
<!break>
Any help or suggestions would be appricated.
Thanks,
Jim

I would very much like to know how to avoid this also!!!

Help. Trying use imessage and keep getting an error message that says the person is not registered with imessage

I am trying to use imessage and everyone I am trying to send to I keep getting a message that they are not registered with imessage. They all have iphones and I know for a fact they are all registered. I have tried all the trouble shooting steps I have found so far. I made sure my imessage is turned on and set under my apple id and email, I'm connected to wifi. etc... I can use facetime but can not message anyone. Thanks in advance for you help

Hi, reagans3.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with iMessage. I am not sure what troubleshooting steps that you have processed; however, there are some additional steps in the article below that may help.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers,
Jason H.

Trying to use Buttons and keep getting an error code

I am trying to use buttons and I keep getting the error code ReferenceError: Error #1074: Illegal write to read-only property graphics on flash.display.MovieClip.
There is one button that doesnt appear when I view it live/in browser/ in flash professional
I have created this button the SAME way, about 36 times, as the other buttons that work fine. What am I doing wrong?
PLEASE HELP ASAP...

The error appears to involve trying to assign a value to the graphics property of a MovieClip. Do you have code that uses something.graphics =

Reading result table using LDB and event get payroll

Similar Messages

Maybe you are looking for