Reading rights for another user

Hi,
I have a customer request who wants to have reading rights on tables which are used in a special workspace scheme.
He wants to compare the contents with an application he is working on.
Is it possible to assign only reading rights on defined tables in an apex workspace?
How can I install it?
Thank you in advance.
Best regards
GibsonLP

Hi all,
prolem is not solved yet.
Can anyone help, please?
Thank you
BR
GibsonLP

Similar Messages

I ordered Illustrator for another user. I received an invitation that was accepted, logged in and tried to change the account to the name and email of the person it was ordered for. How can I get this changed and the invitation sent to the right person?

I ordered Illustrator via creative cloud for another user. I received an invitation that was accepted and tried to change the account to the name and email of the person it was ordered for. How can I get this changed and the invitation sent to the right person?

Cloud as a Gift https://forums.adobe.com/thread/1665610

User administration - read rights for customizing

Hello,
is there s. th. like a only-read-right for the whole customizing img or do I have to get the rights for all the different t-codes inside the img?
Thanks a lot in advance,
Hansi

Hi Mark,
s.th. like this. The point is I'm new to right management. But there must be s.th. like a profile with which I get the right to see all the transactions related to the img or not? Our admin is saying we have to specify which transactions we need exactly which is quiete annoying. Instead I need a possibility to say: "Give me read-rights for this profile" and I can look after the customizing myself... Is there a way???
Thanks a lot.
BR,
Hansi

Install Lync Web App Plugin For Another User

I'm wondering if there is a way to install the plugin for the Lync Web App for another user. The reason why is that administrative permissions are required and our users are not allowed to have those permissions. I have the MSI but when I look at it, it
says
"Cannot install [ProductName].Setting the AllUsers property is not allowed because [ProductName] is a per-user application."
Is there a way that I can install the MSI, maybe through the command line or another method, and specify another user so it installs to their profile?
Thanks!

Hi,
This is typically achieved by allowing exceptions in your software control strategy for the required executable;
LWAPlugin.exe
LWAVersionPlugin.exe
AppSharingHookController.exe
AppSharingHookController64.exe
This typically occurs in VDI deployments where users are not able to install software onremote server, so the above rule is added to the Software Restriction Policy (providing that's what you're using to control application installation).
I'm not familiar with any associated cmd line switches I'm afraid.
Kind regards
Ben
Blog:www.gecko-studio.co.uk/
Twitter:
LinkedIn:
Facebook:
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems
or queries.

Reseting KM List Layout Profile for another user

Hello,
how can an administration reset layout profile personalization settings for another user.
Some users in our system have done the following:
KM Resource->Details->Settings->Presentation->Tab:Settings for You->Change Layout Profile
This creates some problems with our custom layout which is not used because of the user's personalization settings.

Hi,
Look at this:
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/d3/85503e30a9d549e10000000a114084/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/d3/85503e30a9d549e10000000a114084/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/eb/4bc041f123c817e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/eb/4bc041f123c817e10000000a155106/frameset.htm</a>
If you want you can remove the service permissions for Layout from the users, So it won't happen again.

Created help file either won't open or opens blank when emailed or copied for another user to see it.

Created help file either won't open or opens blank when emailed or copied for another user to see it.
Our HR person made a help file she wants to email to someone or copy to a network share.
-If she emails it the other person cannot open it.
-If she copies it even from her desktop where she saved it to the folder with all the other files, it opens blank.
Any help would be appreciated.

I think they must be swapping out .html for .chm in DW or something. What the OP describes sure sounds like what happens when you do that.
@dfiore27101
DW doesn't support .chm file types. Adding the extension doesn't compress the images into the file to create a true .chm.
Adding .chm will make a perfectly good .html file stop displaying in DW though.
An easier way to send someone .html help files would be to archive their folder as a .zip then email the .zip. The recipient would then need to extract the archive to view the files in their browser.
I don't know of any way to create real .chm files in DW.

Issue creating a MatView for another user w/ a private DB Link

I am having an issue creating a materialized view for another user where the select statement for the MV uses a private db link. Looks like the following:
Logged in as user X, I run:
create materialzied view Y.foo
(select blah
from tbl@y_priv_db_link_here);
When I try to run this, I get a permission issue. User X has DBA privilege, user Y has create MV priv and has select priv on the table in the db link.
I can create this MV logged in as user Y. Cant create this logged in a user Y in test or prod environment, so this isn't an option.
Any ideas on how I can create this logged in a user X? I believe the issue here is that since this is a private db link owned by user Y, user X doesn't have access to this db link.
thanks.

Here is what I was trying to do:
SQL> CREATE MATERIALIZED VIEW extract.ADDRESS
2 TABLESPACE xxx
3 BUILD IMMEDIATE
4 REFRESH
5 COMPLETE
6 ON DEMAND
7 WITH PRIMARY KEY
8 AS
9 ( SELECT ... FROM address@CM_TO_CPD);
FROM pwb_address@CM_TO_CPD)
ERROR at line 11:
ORA-01031: insufficient privileges
Message was edited by:
Jim S

How to check whether a file got read permissions for perticular user

Problem: Let JRE is running with some x as effective user in LINUX then while checking file permission it is checking permission on that file for that x user.
File f = new File(�file name�)
if(f.exists())
System.out.println(�exists�);
Else
System.out.println(�does not exists�);
The above code prints exists only when x user have permissions on that file
Requirement: I would like to check whether a file got read permissions for particular user i.e. whether y user got permissions on that file.
Any help is appreciated

In Linux a user has to have read permission on a file to even see that it exists. As a result, if a user (or a group to which they belong) doesn't have read access to the file File.exists() will return false. Windows which doesn't have as tightly controlled access to files will admit that a file exists whether it can be read or not.
PS.
This is proof that I should never answer a question off the top of my head when I haven't had my red bull yet. This is wrong. You will be able to see it if you have read and execute on the directory.
thumps self in head
Message was edited by:
puckstopper31

Reader rights for adding attachment

Hi ,
is it possible to apply reader rights for adding attachments when output pdf form in sap?
where can i find more document on controlling reader rights?
thanks and best regards.
Jun

Hi Jun,
here is a sample code for seting usage rights:
FORM use_rights
CHANGING p_pdf TYPE xstring.
DATA: l_fp           TYPE REF TO if_fp,
      l_pdfobj       TYPE REF TO if_fp_pdf_object,
      l_dest TYPE rfcdest.
MOVE cl_fp=>get_ads_connection( ) TO l_dest.
l_fp = cl_fp=>get_reference( ).
l_pdfobj = l_fp->create_pdf_object( connection = l_dest ).
l_pdfobj->set_document( pdfdata = l_pdf ).
DATA: lt_rights TYPE TFPURIGHT.
PERFORM my_usagerights CHANGING lt_rights.
l_pdfobj->set_usagerights( default_rights = space rights = lt_rights ).
l_pdfobj->execute( ).
l_pdfobj->get_document( IMPORTING pdfdata = l_pdf ).
ENDFORM.
FORM my_usagerights
    CHANGING pt_rights TYPE TFPURIGHT.
DATA: ls_rights LIKE LINE OF pt_rights.
REFRESH pt_rights.
ls_rights-right = if_fp_pdf_usage_rights=>formrights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_fillin. "Ukladani
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_export. "Export XML
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_add.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_delete.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_submitstandalone.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_spawntemplate.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_online.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-right = if_fp_pdf_usage_rights=>signrights.
ls_rights-value = if_fp_pdf_usage_rights=>signright_modify.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-right = if_fp_pdf_usage_rights=>annotrights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_create.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_delete.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_modify.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_copy.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_import.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_export.
INSERT ls_rights INTO TABLE pt_rights.
ENDFORM.
Michal

Make UDF Read-only for all users

Hi
Can i use any script to make a UDF read-only for all users?
i am looking at CPRF and CUFD Tables
thanks

Hi,
You should never try updating system table directly. That will against supporting policy by SAP.
Thanks,
Gordon

Enabling Usage Rights for End User with Reader

When I "Enable Usage Rights in Adobe Reader," utilizing Adobe
Acrobat Pro 9, which functions are restricted for the end user?
Specifically, if one cell property in Acrobat has a
"Calculate" function, will the calculation perform properly in
Adobe Reader 9 for the end user?

Thank you for your posting. These forums are specific to the
Acrobat.com website and it's set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
Note: Once Reader enabled certain functions like editing a
PDF,inserting or deleting the pages will be restricted at end user
part.Apart from this "Calculate" function will support both Acrobat
as well as Reader application.

Pdf form in read-mode for the users and...allowing me to save my new modifications

I wanted to save a modification in my pdf form. Unfortunally, it was opened by another user in read-only mode.
When I tried to save my new modifications, my screen pops me up the classic error message: cannot not save because it is opened in read....
The form is stored in network shared drive and I am the owner. The users have the read only permission.
I open it with Acrobat Pro X and users open it with Adobe Reader XI. Both sofwares are setted with the enable protected mode and javascript disabled,
I tried to not use the preview mode in Windows explorer without succes.
Is my problem a bug or is it the normal way abobe acrobat works ?
Thank you for any replyer !

Hello Gkaiseril,
Thank you for your fast reply !
I am not at my office right now, however I am pretty sure in the Word case, I will be able to edit.
During my problem, I checked in the File manager on the server side (windows 2003 r2 sp1 x64). The reader had not write permission on the file, and I am the only owner with the full permissions.

Address books for another user sharing my computer for now

At this time I am sharing this computer with one other person ..I have set up and named another address book for them.
Is there a way that their email addresses do not get added too mine.. is there a setting where we can set it up so each one has there emails being added to their own addy book.. At the moment there emails are being added too mine... this problem will be ongoing fpr a period of time....
Thank you in advance. :)

''re: At this time I am sharing this computer with one other person .''
Usually, when people share a computer, each user has their own User Account which they logon using a password.
This means that Thunderbird then runs in that User Account and creates a profile in that User Account which holds all the Profile data, emails, passwords, address books etc specifically for that users email address mail accounts.
So then no one can read each others emails nor access other peoples passwords and they can use their own address books.
So if you are sharing a computer and sharing a Profile, then it is advisable that you do not have any stored / remembered passwords, unless that person is eg: spouse and you do not mind them having full access to all your personal stuff.
You have a couple of Options:
'''1.''' Create User Accounts on your computer so that each user has their own User Account, Create a Thunderbird Profile folder and set up mail accounts storing personal emails and address books.
This is the only method offering best security.
'''2. ''' Create another Profile for the other person. then create mail account for that Profile. This will then have it's own folders, address book.
Use Profile Manager to create another Profile.
http://kb.mozillazine.org/Profile_Manager
Make sure to uncheck the box 'Don't ask at startup' to force it to ask which Profile to use.
Any user can still access any profile.
'''3. ''' In current situation.
Stop auto saving outgoing email addresses that are not in the address books as this uses only one setting per Profile.
Tools > Options > Composition > Addressing tab
uncheck: 'Automatically add outgoing email addresses to my'
click on OK
Then you would need to use an Addon in order to be able to select a specific address book when you wish to add the email address/contact to an address book. At the moment, if you click on the FROM header email address or right click and select 'Add to address book', this adds to the default address book called 'Personal Address Book'. This you cannot change because you are using the same User account and Profile.
But with the addon 'MorefunctionforAddressBook'
Right click on eg: From header and choose > Save recipients addresses' > as Contacts
This allows you to select the address book you require.
Addon 'MorefunctionforAddressBook':
* https://nic-nac-project.org/~kaosmos/morecols-en.html
Download to desktop.
In Thunderbird:
Tools > Addons
Clickon on gear wheel icon and select : Install addon from file;
locate file you downloaded and click on Open
You may need to restart Thunderbird.

Authentication prompt issue when opening an office file in a document library with read permission for domain users

An user as part of the domain users tries to open an office file from a document library but he got an authentication prompt asking him to authenticate. Domain users has only access to this library and not to the whole site. This uses to work in SharePoint
2007 without any problem but not in SharePoint 2013, we didn't have a workflow on SP2007.
Domain users has read access to only this document library in the site, but he shouldn't get an authentication prompt since he is part of the domain users and he is not trying to modify the document, he can open the document but gets two prompts, he can't
also see the list using explorer view since nothings appears using the explorer view.
Now, when opening the file, we can see..Updating Workflow Status, but we don't have any workflow working on this site or library, event any feature related to workflow.
If we go to the event viewer in the server, we find this information,
I also checked this thread but I couldn't find this scenario.
https://social.technet.microsoft.com/Forums/sharepoint/en-US/91bc770b-bb70-4885-a4ad-a243edb88753/event-id-8026-workflow-soap-getworkflowdataforitem-failed-doc-library-no-workflow?forum=sharepointgeneralprevious
I also created another list with the same permissions and using other office files but got the same behavior.
Now, we have migrated this site from SP2007 to SP2013.
Any ideas?

OK, I am going to throw out a lot of ideas here so hopefully they get you closer to a diagnosis. Hang on :)
Does it happen to work for some users but not others? If so, try logging in on the "good" computer with the "bad" username. This will tell you if the problem is related to the end-user's system. Also, once the user downloads a document
successfully can they open and work on it in Word? Also, does the document library have any custom content types associated with it or does it just use 'Document'?
I notice that there are other folks on the web that have run into this same problem and the similarity seems to be that they are either on SharePoint 2007 or have upgraded from 2007. Did this doc library start out as a 2007 library?
What you might want to do is this: Make a site collection from scratch in 2013 (or find one that you know was created in 2013). Choose team site (or whatever you want) for the root web and set up the security the same way you have it on the malfunctioning
library. Now, use windows explorer to copy and paste some of the documents to the new location. Be sure you recreate any needed content types. Now test it from the troubled user's computer.
I'm thinking there may be something that is different about the library since it was migrated through various versions and updates since 2007. I've sometimes found that there can be problems (especially with user profiles but that's a different story) with
things that go through this evolution.

Creating a materialized view for another user

I don't seem to find the correct setup for this....
With the user "dummy"
CREATE MATERIALIZED VIEW dummy.thetable BUILD IMMEDIATE REFRESH FORCE ON DEMAND AS select * from real.thetable;
And the materialized view is created ok.
With a DBA user:
CREATE MATERIALIZED VIEW dummy.thetable BUILD IMMEDIATE REFRESH FORCE ON DEMAND AS select * from real.thetable;
ORA-01031: insufficient privileges
I don't want to be switching back and forth from the user to create materialized views, am I missing a permission here? DBA of course has create any materialized view

From the SQL Reference Guide:
To create a materialized view in another user’s schema:
- You must have the CREATE ANY MATERIALIZED VIEW system privilege.
- The owner of the materialized view must have the CREATE TABLE system privilege. The owner must also have access to any master tables of the materialized view that the schema owner does not own (for example, if the master tables are on a remote database), and to any materialized view logs defined on those master tables, either through a SELECT object privilege on each of the tables or through the SELECT ANY TABLE system privilege.
I suspect that, if you first GRANT CREATE TABLE TO DUMMY, you will be able to create the MV.

Reading rights for another user

Similar Messages

Maybe you are looking for