Reading something into a mike connected to an I-pod

I'm trying to submit mp3 recordings of my poetry to some internet radio stations, & using a taperecorder & i-mik hasn't worked.
I have an i-pod shuffle. someone told me to get a griffin mik, attach it to my I-pod & read my poem into it. Then what I read will be downloaded to I-tunes, and converted to an mp3. It wll be a digital recording. Was I given the accurate info? I thought that you couldn't download anything from an I-pod, but this person says that she does all the time.

Hi,
You mentioned a tape recorder. You mean your computer, I gather. If the sound level is low, your microphone is in need of pre-amplification to reach the level needed for your situation. There are a number of different ways to proceed. You do not need to upgrade your OS if you don't want to. One method is to get a microphone with the right "impedance." Some microphones (I have a couple of Apple branded ones) give the result you describe. Other ones (I have an Apple 'desktop' microphone that works clear as a bell - much better than the other Apple brand ones that I have. The two 'soft' microphones I own need an accessory for increasing the level such as the pre-amplification mentioned above. In addition to the pre-amplifier is something called an 'interface' by Griffin Technology which they call an iMike. The iMike plugs into your computer USB jack and gives you the choice of a microphone input with or without amplification. It makes the whole set-up much easier. It works with applications such as GarageBand and also with the OS directly.
It will give you MUCH better quality audio than a tape recorder or an unmodified iPod.
Good Luck, I hope this helps.

Similar Messages

Is it possible to export data from a PDF in Reader XI into an xfdf file?

Hello,
I am new to the forum and to Adobe Acrobat. Please bear with me as I explain what I need to do and what I have tried to do so far to accomplish this (based on reading numerous forum discussions and Adobe IAC/JavaScript manuals).
Operating system, Adobe and Microsoft products on my standalone PC:
     OS: Windows 7 Professional
     Adobe: Adobe Acrobat Pro XI
                   IAC Software (free download)
                   Adobe Reader XI
    Microsoft: VisualStudio 2010 (VB.NET and C#.NET)
I need to export the data from a fillable PDF in Acrobat Reader XI into an .xfdf file that will allow me to pull the field data out of the .xfdf (xml-type) file and use it in a C# program. I tried using exportXFDF as a trusted function not knowing initially that Acrobat Reader XI will allow you to import, but not export. Is there any workaround for this problem?
Using the IAC I was able to write a program that allowed my to save the data in a fillable PDF in Acrobat to an xml-type file; however, that only worked when my executable was running on a PC that had Acrobat installed (not Acrobat Reader). I need to be able to do this out of Acrobat Reader XI, and we do not want to use Adobe LiveCycle to do this.
I feel like there is something very obvious that I am missing here.
kfreema7

I hope you won't see this as rude, but what you are missing is the obvious point that Adobe are in business to make money. So they put as little in Adobe Reader as they can, so people are motivated to buy stuff. Every development intended for Reader has severe limitations on feasibility and techniques for this reason; it's a huge (but very common) mistake to just develop for Acrobat and assume Reader will follow.

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

Hello,
You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
Enter a name for the connection and click OK.
In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
In the final pop
-up dialog, set the communication settings for communicating with your device.
Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
Grant M.
National Instruments

Auto Time change, Sound mute and trying to read something before windows 7.

Dear,
I recently bought a MacBook Pro i7. I installed Windows 7 Ultimate through Boot Camp. But after installing i am faceing few problems as listed below:
1: *Automatic Time change*
When i am in windows 7 and i switch to Mac OS X the time of my Mac OS X automaticly changes every time and i have to adjust the time every time i switch from Windows 7 to Mac OS X. This problem is when i change my operatinf system from Win to Mac.
2: *Sound Mute*
Whenever i log into Windows 7 i always fine the sound to be mute and i always have to unmute the sound from the button.
3: *MacBook trys to read something before Windows 7 starts booting*
Whenever i start windows 7, before the windows 7 booting screen, there is a black screen with a gray underscore (_) which blinks for a minute or two. And after that the booting of windows 7 starts. That (_) makes me wait a lot before booting into windows 7.
Please help me regarding these problems of mine. I even called the Apple care but they dint have any solution to it.
Waiting for your reply.

hi,
I tried all the methords as u said and it dint work atoll for me. If you have a video or some kinda software which can dignolise these problems than i feel that i can do it. Neways im rely getting so ****** off that after buying such an expensive product, it cant give me complete satisfaction, I feel that apple should first make their current products perfect and then go on launching some other products. Apple shoudent lie to sell it products that windows is compatible with MacBook. I went to a authorised service center Unicorn Infosolutions Pvt Ltd situated in Mumbai,Maharashtra,India. Even they said that all these three problems cant be resolved. This is rely bad, i never thought that apple is like this!!!! i always was a fan of apple n used to always pro-vogue people to buy its products. But now i dont think so. Neways if buy chance there is some other methord or way than please tell me.

How come now every time i throw something into the recycle bin it asks for my password and when I do it doesn't show in my bin help please!

How come now every time i throw something into the recycle bin it asks for my password and when I do it doesn't show in my bin help please!

You're throwing away files that either don't belong to you or are in a folder that doesn't belong to you. Since your user account has Administrator privileges, it just ask you for authentication, else it would forbid the operation.
To better understand the concept, select one of your files from your home directory and press Control-I. In the info window, check the Sharing & Permissions section at the bottom. Do the same with one of the files that asks for the password.

Loading something into a game.

Hey everybody. Ive been trying to load something into my game so that when i reach, lets say 1000 points another powerup comes into the game.
I tried doing the opposite of Unloading something into the game which's actionscript is
onClipEvent{
     if(_root.char.hitTest(this)){
     _root.char.speed=10;
     unloadMovie(this)
Saying that when the char hits this, its speed increases then the powerup goes away. so it worked fine but i wanted to do something that made the powerup come into the game. The actionscript i tried is.
onClipEvent{
     if(_root.score<=1000){
     loadMovie(this)
i didnt give it anything specific to do once it was loaded. but i tried that and it said that it didnt work. i guess load movies and unload movies are totally different. But if anybody could please help me, it would be much appreciated. Thanks =).

ok. so, if you have:
onClipEvent(enterFrame){
     if(_root.score<=1000){
     loadMovie(this)
it doesn't make sense to use loadMovie(this).
you could use something like:
onClipEvent(enterFrame){
     if(_root.score<=1000&&!_parent.loadStarted){
_parent.loadStarted=true;
     this.loadMovie("somefileyouwantoload.xxx")
but that's really poor coding. it would far better to use a loop that would and, you could, terminate:
yourMC.onEnterFrame=function(){
if(_root.score<=1000){
this.loadMovie("somefileyouwanttoload.xxx");

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When I forward an email from my Mac Mail, the body of the email I just forwarded shows as an attachment in the recipients outlook. Is there a way to change this so my clients don't have to open an attachment to read something that I forwarded to them?

When I forward an email from my Mac Mail, the body of the email I just forwarded shows as an attachment in the recipients outlook. Is there a way to change this so my clients don't have to open an attachment to read something that I forwarded to them?

Open Terminal in Utilties and copy/paste
This will send the attachment embedded inline. (This works in Snow Leopard, but not sure about Lion. Do a test first. If it doesn't work, just google "send attachment embedded + Lion." You don't actually have to send the message to see how it will appear.)
defaults write com.apple.mail DisableInlineAttachmentViewing 0
To reverse the setting, change the 0 to a 1
However, whether this will work or not will depend on what the e-mail client on the receiver's end does with it.

Read statement into an internal table

Hi Experts,
In my report i have several read statements, now my requirement is i want to put all the read statements into an internal table, how do i achieve it???
Thank you!

Hello Maya,
i want to know how many number of times the read statement is used .
Two ways:
1. use a counter after each read statement in your program and increase it by 1 everytime there is read statement and display the final value of the counter in the report that you want.
2. If you just want to know press (CNTRL + F) enter "READ" , select the radio button "In Main program" and then you will get all the read statement and can count it manually.
Hope I have not answered your question wrong. But if I have, please be more specific about your requirement so that many an help you.
Thanks,
Jayant Sahu.

Read/Write problems with multiple connections using MySQL & Tomcat

hello all,
I am developing a web-based java application that runs on a 4.1 tomcat server and uses MySQL 3.23.52 as db server.
this program uses hundreds of tables with hundreds of rows each.
when two or more users are connected, we are experiencing several problems:
1. when a query is started, they get cross-results that come from both connections.
2. when inserting/updating (most queries are long and take a few seconds), sometimes data are crossed too, sometimes they are saved incorrectly but get no error message, sometimes they are not saved and get 'null pointer' sqlexception (but tables and queries are correct).
3. using SHOW PROCESSLIST and SHOW STATUS, we saw that MySQL server hosted no more than 3 max_used_connections, even when my.cnf parameters where set with more. when 3 or more users try to access the database, they get a bad handshake error until other connections are freed.
any suggestions?
thanks
alessandro bonanni
university of udine

I am not using a connection pool. I read that when two different connections try to access the same data simultaneously, mysql is not secure. maybe a connection pool could solve that? or maybe is it a mysql limit?
alessandro

Webdynpro reading context into table

Hi Guy,
I havent been able to find anything on this but I am assuming its a very common questions. I apologise in advance.
My question below:
I have a context 0..n
I would like to read this into table type t1.
Context and table are base on the same structure.
I understand I have to use get_static_attributes_ref or table. But I am not sure how to go about getting it and then casting it into type t1
Thanks in advance.
Moderator message: please post again in "Web Dynpro ABAP" forum
Edited by: Thomas Zloch on Oct 28, 2010 3:03 PM

hi Nir..
may be you shud use the HSSF api.....
try this link....
<a href="http://www.koders.com/java/fid5636164FDE72156B90C9973AC12EBBF49048BA4E.aspx">HSSF_API</a>
Regards,
Sudheer

Suddenly, most of my folders that I separate the read emails into dissappeared. How to get back?

In Thunderbird just now most of the folders that I put my read emails into have disappeared. All the old messages are in them . I need them and the folders too. I don't know what I did to make them disappear. Please help. Thanks.

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

Urgent help on reading data into ByteBuffer

Hi,
I am trying to read data into ByteBuffer using SocketChannel.
The following code working fine but the problem is with ByteBuffer size.
The data varies from request to request .
How do I read data into ByteBuffer with out specifing size .
The problem with size is some records has more than 500 bytes and some are less than 500 bytes.
I want to read all the data .. ( even if it has more than 500 bytes ..)
How do i solve this problem ..
Is there any way to read data dynamically from socket channel ...
Any help on this please ...
The data I have to read is in the following format ..
XXX ... yyyyy
AAA
BBBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDDDDd
etc ...
Here is my Code:
public ByteBuffer getResponse(byte[] request) throws Exception {
int lenth = 500;
InetSocketAddress isa = new InetSocketAddress("ip", port);
SocketChannel channel = SocketChannel.open(isa);
ByteBuffer requestBuffer = ByteBuffer.wrap(request);
channel.write(requestBuffer);
ByteBuffer responseByteBuffer = ByteBuffer.allocate(length);
int num = 0;
while (num == 0 ) {
responseByteBuffer.rewind();
num = channel.read(responseByteBuffer);
channel.close();
return responseByteBuffer;
Thanks.

Two possible solutions
1. Read in as many bytes as you can until you hit the EOS OR you fill the byte buffer. If you fill the buffer (try checking for BufferUnderFlowException), you could move the read bytes into a dynamically allocated memory Collection such as an ArrayList. When you hit the EOF, you could then do whatever else you need to do from then on.
2. I use this option: Implement a site local protocol for transmitting data. Provide a header first containing 2 ints (compressed size, uncompressed size - so you can also use compression when sending), and send the remainder as a payload.
Therefore
Read in the header first (always 8 bytes)
Then extract those integer values. They will tell you how much is being sent. Set you byte buffer for the payload to be the correct size for this transmission.
Reset and wait for next connection

HT1338 I have the mac os x 10.7.3 and am trying to install a dell v515w printer and am having no luck. Anyone out there got any ideas. Have tried to download the drivers but they don't' work. I read something somewhere about trying the Lexmark. Please

I have a mac os x 10.7.3 and am trying to install a dell v515w printer. Have tried numerous times to find driver, but mac says not compatible. I read something about using a Lexmark driver. Any suggestions???
Thanks so much,

If there is no driver compatible with OX X 10.7 you might want to consider getting a different printer. It may save hair pulling and aggravation.

Reading something into a mike connected to an I-pod

Similar Messages

Maybe you are looking for