Reading the Facility Callername from a tcl script

I am looking for a way to read the Callingname in the facility message so that I can pass into
set callInfo(displayInfo)
Basically I'm trying to pass Callername to an ip phone through a TCL script on the gateway during callsetup. This normally gets dropped.
Is there a way to parse these fields in the Facility message?
Thanks ahead of time for any help.
Oct 14 21:59:58.274: ISDN Se0/0/0:23 Q931: RX <- FACILITY pd = 8 callref = 0x03BB
Facility i = 0x9F8B0100A117020101020100800F5452494F4E20574F524C44204E4554
Protocol Profile = Networking Extensions
0xA117020101020100800F5452494F4E20574F524C44204E4554
Component = Invoke component
Invoke Id = 1
Operation = CallingName
Name Presentation Allowed Extended
Name = MY CALLINGNAME

Well.. I'm having to alter an existing script that parsers the calls for fax service before they are being sent to callmanager.
So far I think im in the right direction but I don't know how to use the "object get gtd" properly, if that's even the right approach. Im trying to parse
GEN,y,y,0,JOE BLOW
from the gtd debug below...
Oct 15 16:32:26.543: CNG tone sent
Oct 15 2009 11:32:26 CDT: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is now connected to XXXXXXXXXX N/A
Oct 15 16:32:27.231: ISDN Se0/0/0:23: Built a GTD of size 110 octets for ISDN message type 0x62
Oct 15 16:32:27.231: tsp_ccrawmsg_encap: calling cdapi_find_tsm
Oct 15 16:32:27.231: cdapi_find_tsm: Found Tunnelled Signaling Msg with GTD: PROT_PTYPE_GTD
Oct 15 16:32:27.231: cdapi_find_tsm: Found a gtd msg of length 110:
Oct 15 16:32:27.231: gtd msg = "FAC,
PRN,isdn*,,NI***,
GEN,y,y,0,JOE BLOW ï----------------Caller NAME
UFC,GEN,5,fachd,9f8b0100
UFC,GEN,5,inpdu,020101020100"
This is what I have so far...
set DestNum [infotag get evt_dcdigits]
set callInfo(destinationNum) $DestNum
infotag set evt_facility_report gtd
infotag get evt_gtd CallerID
set CallerName [object get gtd CallerID FAC,4,GEN]
set DestNum [infotag get evt_dcdigits]
put "$CallerName"
put "$DestNum"
set callInfo(displayInfo) $CallerName
set callInfo(destinationNum) $DestNum
leg setup $DestNum callInfo leg_incoming

Similar Messages

How to make SSIS packages automatically read the input file from a path?

Currently I am using a SSIS package to read data from a .dat file and load it into SQL Server tables.
I am placing the input .dat file on the desktop. In the connection manager -> Browse option, I am pointing this file to create connection.
The file naming convention is like - aSNAP_Data_20140926_P-2014-09-26_07.02.36
However, I need the SSIS package to automatically read the input file from a folder which is located in a remote server. This folder has lots of files where input files are added on a daily basis with the date value in the file name as mentioned above.
I want to schedule the SSIS package to run daily and take the latest file in the folder based on the date.
Please let me know how to do it. Any help would be highly appreciated.....
Thanks in advance.

Hi SQL_SSIS_Dev,
According to your description, you want to get the latest file from a path to a SQL Server table. After testing the issue in my environment, we can refer to the following steps to achieve your requirement:
Create two variables, VarFolderPath stores the folder path in which our files exist, VarFileName hold the value of most recent File Name.
Drag a Script Task from SSIS Toolbox to Control Flow Pane, then select “User::VarFolderPath” as ReadOnlyVariables, select “User::VarFileName” as ReadWriteVariables.
Then Edit Script with the C# code below:
Add “using System.IO;” into namespace.
Add the code below under Main function:
var directory= new DirectoryInfo(Dts.Variables["User::VarFolderPath"].Value.ToString());
            FileInfo[] files = directory.GetFiles();
            DateTime lastModified = DateTime.MinValue;
            foreach (FileInfo file in files)
                if (file.LastWriteTime > lastModified)
                    lastModified = file.LastWriteTime;
                    Dts.Variables["User::VarFileName"].Value = file.ToString();
Drag a Data Flow Task to Control Flow Pane and connect to Script Task.
In the Data Flow Task, drag a Flat File Source with a file in the source folder as all the files have same structure as the File name.
Add the property below the Flat File Connection Manger expression:
Property: ConnectionString      Expression: @[User::VarFolderPath] +"\\"+ @[User::VarFileName]
Drag an OLE DB Destination that connect to the Flat File Source, then configure a table to store the data.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

027: Unable to read the sequence number from the Workstation object

Environment:
NW 6.5 sp4
Zen 6.5 sp1
We had a problem with our inventory server processing .STR files a couple
months ago - had to turn off inv. policies on workstations while we resolved
it. Now it's resolved and we're running inventory again. We have a large
number of workstations reporting this error:
027: Unable to read the sequence number from the Workstation object
They have no data in the DB, although they do have minimal scan info, and
the last scan status date matches that of the sequence number error.
I've seen this sporadically in the past and have been able to resolve it by
initiating a full scan on the individual workstation. However, that does
not seem to be making a difference this time.
Novell's troubleshooting document basically says see if the server's
running, and see if there's data for the workstation in the db. Then call
tech support.
Any other ideas?
~~~Nicoya...

Jared wrote:
> Nicoya Helm,
>
>> 027: Unable to read the sequence number from the Workstation object
>
> I am thinking that this can also mean a previous full scan was not
> found. Or maybe the STR file name is bad.
>
> This information is stored here
> HKEY_LOCAL_MACHINE\Software\Novell\Workstation
> Manager\InvScanner\"STRFileName"
The machines I'm troubleshooting have valid formats for their STR names,
but that doesn't necessarily mean they are valid STR sequence numbers.
Does removing the value in the reg key cause the STR file name to be
recreated?
>
> Because imaging is used, it's possible that this information is matching
> on some machines which could cause problems.
I've verified that none of our images contain the c:\zenworks history
folder, and we run a script that cleans up any zenworks items before
sysprep (i.e. makes sure there's no registration info on the
workstations, etc). Our imaging scripts also clear any ZIS info to
avoid any duplication as well, so I don't think imaging would be causing
this.
> I believe 6x also has a hist.ini file like 3x inventory does, you might
> delete the file also.
Good tip about the hist.ini file, I didn't know about that. It does not
solve the sequence number error, but it does seem to force a full scan
of the system and cause the new scan to be stored in the DB, which was
not happening before.
Thanks!

Java API to read the Encrypted Values from Windows Registry settings

Is there any Java API to read the Encrypted Values from Windows Registry settings ?
My Java Application invokes a 3rd party Tool that writes the key/value to windows registry settings under : “HKLM\Software\<3rdparty>\dataValue”.
This entry is in BINARY and encrypted with 3DES, using crypto API from Microsoft.
3rd party software to encrypt the data stored in registry it
either uses C++ code: and uses the call “CryptProtectData” and “CryptUnProtectData” or
If it is a .NET (C#) it uses the call “Protect” or “UnProtect” from class “ProtectData” of WinCrypt.h from the library “Crypt32.lib.
Note: The data is encrypted using auto-generated machinekey and there is no public key shared to decrypt the Encrypted data.
Since the data is encrypted using auto-generated machinekey the same can be decrypted from a .Net / C++ application using CryptUnprotectData or UnProtect() API of WinCrypt.h from the library “Crypt32.lib.
To know more about Auto-Generated MachineKey in Windows refer the links below
http://aspnetresources.com/tools/machineKey
http://msdn.microsoft.com/en-us/library/ms998288.aspx
I need to find a way in Java to find the equivalent API to decrypt (CryptUnprotectData) and Microsoft will automatically use the correct key.
But i couldn't find any informato related to Java APIs to enrypt or decrypt data using auto-generated machinekey.
Is there a way to read the encrypted data from Windows regsitry settings that is encrypted using the Auto-Generated Machine Key ?
Kindly let me know if Java provides any such API or mechanism for this.

If the symmetric key is "auto-generated" and is not being stored anywhere on the machine, it implies that the key is being regenerated based on known values on the machine. This is the same principle in generating 3DES keys using PBE (password-based-encryption). I would review the documentation on the C# side, figure out the algorithm or "seed" values being used by the algorithm, and then attempt to use the JCE to derive the 3DES key using PBE; you will need to provide the known values as parameters to the PBE key-generation function in JCE. Once derived, it can be used to decrypt the ciphertext from the Regiistry in exactly the same way as the CAPI/CNG framework.
An alternate way for Java to use this key, is to write a JNI library that will call the native Windows code to do the decryption; then the Java program does not need to know details about the key.
That said, there is a risk that if your code can derive the key based on known seeds, then so can an attacker. I don't know what your applicatiion is doing, but if this is anything related to compliance for some data-security regulation like PCI-DSS, then you will fail the audit (for being unable to prove you have adequate controls on the symmetric key) if a knowledgable QSA probes this design.
Arshad Noor
StrongAuth, Inc.

Not able to read the wsdl file from server Premature EOF encounter

Hi All,
I am facing issue while accessing a web Service from server. Here is the clear view about it.
I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
Now here i am facing peculiar behavior which i am not able to trace it out.
1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
Can someone please help in resolving the issue.
I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
Many thanks.
Tarak
Edited by: user11896572 on Jan 17, 2012 5:22 PM

Hi,
Setting default from the jdeveloper -
During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
Setting default from the em console -
After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
Refer -
http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
8.2 Managing the State of Deployed SOA Composite Applications
Thanks

Read the job Z_JOB from SM37 and re-schedule dynamically

Hi All,
I have one requirement where I need to schedule a job in background. The job Z_JOB has 10 steps in it and each step itu2019s calling different program with a variant. Now I need write a Z program to re-schedule the Z_JOB dynamically.
I know how to schedule the job with multiple steps through program. (JOB_OPEN, Submit Statement, JOB_CLOSE). But my question is there any other way to read the job Z_JOB from SM37 and re-schedule dynamically. So that I can avoid this 10 SUBMIT programu2026??
Thanks in Advance,
Raghu.

Hello Raghu ,
JOB_OPEN ( Opens a BG job )
JOB_SUBMIT ( Insert a background Task)
JOB_CLOSE (Closes a BG job)
Are the 3 function module by with you can create a have a bg job sheduled programatically...!
Hope it helps
Edited by: Anup Deshmukh on May 3, 2010 12:36 PM

Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!

Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

Reading the printer name from the registry

Hi,
I am trying to use the following program to get the Printer name from my Registry.. this program has been taken from Forums.
package yourpackage;
import java.awt.Graphics;
import java.awt.print.PageFormat;
import java.awt.print.Printable;
import java.awt.print.PrinterException;
import java.awt.print.PrinterJob;
import oracle.forms.ui.VBean;
import oracle.forms.properties.ID;
public class printDialog extends VBean
private static final ID PRINTER = ID.registerProperty("PRINTER");
public printDialog()
class PrintObject implements Printable
public int print (Graphics g, PageFormat f, int pageIndex)
return NO_SUCH_PAGE;
public Object getProperty(ID id)
if (id == PRINTER) {
PrinterJob job = PrinterJob.getPrinterJob();
job.setPrintable(new PrintObject());
if (job.printDialog())
return job.getPrintService().getName();
} else {
return null;
} else {
return null;}
This program when compiled gives me the error as
Error(32,12): method getPrintService() not found in class java.awt.print.PrinterJob
I did set the project settings from Project-Project Settings and included Oracle Forms Libraries. But I still continue to get the error.
I understood from the web that I need to put PrintService class which downloaded from the web as part of jnlp.jar
How should I set this if this is the correct one?
Early response would be highly appreciated
Thanks a lot for your time and help
Narain.

Narain,
I could swear I answered this on teh Jdeveloper forum ;-)
The prin service is part pf Java 1.4, which means that it is not available in JInitiator today. Use the Java Plugin 1.4 and the required classes are present. JNLP stands for Java Network Launching Protocoll and has nothing to do with what you want to achieve.
In addition, to read the printer names from Forms your jar file has to be signed.
Frank

How do I read the display icon from the IStep interface?

I would like to read the step icon from a step object for display on my custom UI. IStep::GetSmallIcon returns a LPDISPATCH, but I can't find in any of the documentation how to use that interface pointer to get the icon handle of the step. Is there an TS icon interace that I should query for?
Thanks,
Aaron

Hi,
::GetSmallIcon returns a IPictureDisp. IPictureDisp has a property called DISPID_PICT_HANDLE which returns the handle.
Here is an example code in CVI
pictureH is a CAObjHandle(IPictureDisp)
CA_PropertyGet (pictureH, &errorInfo, DISPID_PICT_HANDLE ,CAVT_LONG, &stepIcon);
You can find more information at the following link in MSDN:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/com/ctin_p_4gfk.asp

Error at the time of MIGO- not reading the excise base from invoice

hi gurus
when we do inward the material during sto using migo, the following error occurs Error at the time of MIGO- not reading the excise base from invoice
kindly suggest right answers to overcome this?
with regards
baalakrushnan.da

hi,
Go to logistics general and see whether for the excise group migo settings are maintained.
See for the material in depot chapter id and excise indicators are maintained ie J1ID.
since depot also considered as plant so the chapter id and plant combination has to be maintained.
Regards
Saju

Can I read the texts msgs from the other lines on my account?

Can I read the texts msgs from the other lines on my account?

rcschnoor wrote:
tikibar1 wrote:
If the phone is using Verizon Messages and you know the MyVerizon password, then you can read the messages from your computer.
Of course, this assumes the messages had not been deleted on the phone by the user.
Of course! And that also applies to reading the texts on the phones themselves.
Deleted texts will still show up on the text logs, though.

Elements 10 can not read the raw-files from my Sony a-57

The raw-converter is updatet to 6.7 and according to Adobe it should be able to read Sony a-57. When I got Elements 10, a file had to be moved so it could read the raw-files from my Minolta 5D. Can this be the cause of the problem ? What to do ?

What version of ACR does Help / About Plug-ins… / Camera Raw… show you, and is more than one Camera Raw listed in About Plug-ins…?

Error reading the standard sequence from the document tables

Hi PM Experts,
Please help!
Recently SAP patching is carried out in our R/3 environments. Before patching, all our customized RFCs were working correctly.
We are using BAPI ''BAPI_ALM_ORDER_GET_DETAIL' in a RFC. After the patching, the version date of the BAPI ''BAPI_ALM_ORDER_GET_DETAIL' is changed to new date of patching.
Now, when we are calling the customized RFC, ''BAPI_ALM_ORDER_GET_DETAIL' is returning an error 'Error reading the standard sequence from the document tables'.
This comes when we are pasiing any order with Order type 'ZM02' ( Maintenance Order - Preventative). It is working absolutely fine with Order Type ZM01(Maintenance Order - In Hours Opex).
Sometime, when RFC is run individually, it works fine with same data and sometime it is throwing this error with the same data. Very Inconsistent.
Please advice whether patching is the reason.
Any advice..is welcomed.
Many Thanks,
Rohit
Edited by: Rohit Kumar on Jan 14, 2009 3:50 PM

Thanks a lot.
We found that the flow of the code(RFC) was making a situation where even correct order id was passed to this BAPI, the result was an error 'Error reading the standard sequence from the document tables'. we reverted the RFC to it's earlier version. now that problem is not there.

SAP Patch :'Error reading the standard sequence from the document tables

Hi Experts,
Please help!
Recently SAP patching is carried out in our R/3 environments. Before patching, all our customized RFCs were working correctly.
We are using BAPI ''BAPI_ALM_ORDER_GET_DETAIL' in a RFC. After the patching, the version date of the BAPI ''BAPI_ALM_ORDER_GET_DETAIL' is changed to new date of patching.
Now, when we are calling the customized RFC, ''BAPI_ALM_ORDER_GET_DETAIL' is returning an error 'Error reading the standard sequence from the document tables'.
This comes when we are pasiing any order with Order type 'ZM02' ( Maintenance Order - Preventative). It is working absolutely fine with Order Type ZM01(Maintenance Order - In Hours Opex).
Sometime, when RFC is run individually, it works fine with same data and sometime it is throwing this error with the same data. Very Inconsistent.
Please advice whether patching is the reason.
Any advice..is welcomed.
Many Thanks,
Rohit

We found that the flow of the code(RFC) was making a situation where even correct order id was passed to this BAPI, the result was an error 'Error reading the standard sequence from the document tables'. we reverted the RFC to it's earlier version. now that problem is not there.

Reading the Facility Callername from a tcl script

Similar Messages

Maybe you are looking for