Reading the master data for an info object

hi experts,
I have a requirement, can i use the read master data option in transformations of a cube and store the text data related to material ??
thanks and regards
vijay
Edited by: pedamarla on Apr 17, 2009 12:25 PM

Hello Vijay,
As suggested above, you wont be able to read master data text of an InfoObject in your transformation, if you need to achive this, in the transformation routine, for the InfoObject, where you need to feed the material text, you would need to read the text table of InfoObject 0MATERIAL.
Please let me know if you need any more information.
Regards,
Pankaj

Similar Messages

How to get master data for 0Customer Info object.

Hey Frieds,
I have infoobject 0customer and 0Comp code , I want to get the 'address' field of it .
I checked in master data and found that address field is not populated ,so is there any standard data source to get it , or any other way to get it.
Please respond
Thanks

Hi Anurag,
you will get the address in the 0customer_attr datasrc.
You can populate address as an attribute of 0customer object from here.
hope it helps...

How 2 upload Master Data 4 a Info Object in BI 7.

Hi,
I have to load Master Data to a Info Object in BI 7 ( Like Diret Update in 3.5 )
How 2 upload Master Data 4 a Info Object in BI 7.
Dont suggest me to " Insert Characteristic as Data Target".
Points assured.
Thank you.

hi...chk these steps..
Uploading of master data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
hope this helps..

What are the T-codes that contain the master data for material and vendor?

what are the T-codes that contain the master data for material and vendor?

hi ,
- Display Material tcodes...
MM01 - Create Material
MM02 - Change Material
MM03 - Display Material
MM50 - List Extendable Materials
MMBE - Stock Overview
MMI1 - Create Operating Supplies
MMN1 - Create Non-Stock Material
MMS1 - Create Service
MMU1 - Create Non-Valuated Material
ME51N - Create Purchase Requisition
ME52N - Change Purchase Requisition
ME53N - Display Purchase Requisition
ME5A - Purchase Requisitions: List Display
ME5J - Purchase Requisitions for Project
ME5K - Requisitions by Account Assignment
MELB - Purch. Transactions by Tracking No.
ME56 - Assign Source to Purch. Requisition
ME57 - Assign and Process Requisitions
ME58 - Ordering: Assigned Requisitions
ME59 - Automatic Generation of POs
ME54 - Release Purchase Requisition
ME55 - Collective Release of Purchase Reqs.
ME5F - Release Reminder: Purch. Requisition
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MBRL - Return Delivery per Mat. Document
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB1B - Transfer Posting
MIBC - ABC Analysis for Cycle Counting
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI21 - Print physical inventory document
MI04 - Enter Inventory Count with Document
MI05 - Change Inventory Count
MI06 - Display Inventory Count
MI09 - Enter Inventory Count w/o Document
MI34 - Batch Input: Enter Count
MI35 - Batch Input: Post Zero Stock Balance
MI38 - Batch Input: Count and Differences
MI39 - Batch Input: Document and Count
MI40 - Batch Input: Doc., Count and Diff.
MI08 - Create List of Differences with Doc.
MI10 - Create List of Differences w/o Doc.
MI20 - Print List of Differences
MI11 - Physical Inventory Document Recount
MI07 - Process List of Differences
MI37 - Batch Input: Post Differences
for vendor..
XKN1 Display Number Ranges (Vendor)
XK01 Create vendor (centrally)
XK02 Change vendor (centrally)
XK03 Display vendor (centrally)
XK04 Vendor Changes (Centrally)
XK05 Block Vendor (Centrally)
XK06 Mark vendor for deletion (centrally
XK07 Change vendor account group
XK11 Create Condition
XK12 Change Condition
XK13 Display Condition
XK14 Create with cond. ref. (cond. list)
XK15 Create Conditions (background job)
reward points if useful,
venkat.

Read error when reading the master data of 0EMPLOYEE on demand, attribute 0

Hello All,
While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
Error 1 in update.
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
Please let me know how can it be resolved.
Regards
Rohit Parti

The problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.

Crystal reports 2011 failure to pull the master data for AP Items

I am using businessobjects 4.0 and i am also running crystal report 2011.I am connecting to a sap erp ecc 6.0 ehp4 without any issue.The challenge comes when trying to input or pick the master data for example company code .The crystal report does not populate the company code field with master data.Any suggestions?

Hi Venkateswaran,
FIrst of all thanks for offering help...
uploding screen shots, below mentioned screens are captured when I was creating a new report on CR2011, usning SAP standard table "T001", there is no parameters, it is simple report but I didnot get data, if i browse the field through Cystal report is says Data Size is 0.
I also would like to inform you that If i use crystal report 2008 SP3 for same ERP, Same table and same fields, then i get proper data/report.

Error when reading the DDIC-data for table

Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit Vilkhoo

Was able to solve using oss note 1972533.

Please maintain the master data for material during product cost collector

hi
i get a error
please maintain the master data for material during product cost collector
please guide me
regards
leo

Hi Leo,
Can you elaborate your issue, like when did you get the error exactly?
If it is the error you got while creating Product Cost Collector, then this is not the right Forum to post.
Please post your question in the 'ERP Manufacturing (PP)' forum
Regards,
Manimaran M

How should i get the delta data for those new object's previous delta data?

Hallo all,
i have 2lis_11_vahdr and i am using a standard and loading delta! now i have appended some new fields in the datasource then in infosource then in ods and infocube..! now how should i get the delta data for those new object's previous delta data???
Jimmy

Hi,
After appending new fields in the datasoure.It is not possible to delta load, u should have to load everything
Thanks,
Shreya

Open hub Services - How to extract the master data related to a object ?

Hi Gurus,
I am implementing OpenHub services for our project, it's on BW 3.5, I have the list of required fields with which I am creating an InfoSpoke. Now I am stuck in some the info objects which are having master data associated with it.
Example : Business partner(BP) data, when I map the 0BP infobjects in infospoke it's extracting the BP ID (ex: CT065316,CT068638 etc) in flat file but I want the BP name, address & telephone number as well, which are coming from master data table. But I am able to map only 0BP infobjects as a part of ODS/Cube.
Can any one tell me how to get the master data extracted in the flat file with associated info object???
Answers will be highly appreciated.
Regards,
Kironmoy Banerjee
Edited by: Kironmoy Banerjee on Oct 1, 2009 3:34 PM

Hi Kironmay
Please follow the below mentioned procedure to create a transformation. This is applicable for BW 3.5 as well.
- Enter your infospoke in the edit mode.
- On the Transformation tab set the indicator for the Infospoke with Transformation with BADI so that the infospoke is activated.
- This will take you to the Addin implementation/BADI builder.
- Enter the short text/description for the implementation. The implementation name is always the same as the technical name of the infospoke
- The implementation of the BADI is always filter dependant.
- In the properties tab of the infospoke enter your infospoke under the Filter specifications.
If you do not specify an InfoSpoke under Filter Specifications, then this implementation is valid for all InfoSpokes. This means that this is called up for all InfoSpokes during the extraction.
- Activate your class
- From your interface tab page, double click on the Transofrm Method and you will arrive in the class builder page
- Here you can enter the code
- To do a look up of the master data you have to write a code similar to the one I've given below. This is just an example for looking up material master.
IF FLT_VAL = 'Your infospoke'.
T_DATA_IN[] = I_T_DATA_IN[].
Select zstd_cost from /bi0/pmaterial into table T_return
For all entries in T_DATA_IN
WHERE material = T_DATA_IN-material.
...Continue with your code.
Append output from T_return to your output E_T_DATA_OUT
- Activate your method. Return to the BAdI builder. Return to your InfoSpoke.
I hope this helps.
Thanks.

Error when reading the access data for the Adapter Engine

We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xpd.dbcixpd</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Pls suggest if anyone has gone thru same problem.
Regards
Amar

I got the same problem while using RFC lookup.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.tx1.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any idea ,when we get this error usually.

The time dependency for reading the master data (define key date) of attribute '0IND_SEC' of InfoObject '0UCINSTALLA' has not been defined.

Hi Gurus,
We have recently upgraded our BI support pack from BW 701 SP 7 to BW 701 SP15. We are facing some transformation activation issue after the upgrade.
Can some one help me with this.
Thanks,
Shak.

Hi,
Time independent.
Some more details,
Info Objects are active and I have tried RSDG_TRFN_ACTIVATE program to activate. Checked RSRV for both the info objects.
Thanks,
Shak.

Assigning Text of a master data to another info object

Hi,
I need to assign text of a master data infoobject, to another inobject.
Can i directly read the two tables (master data and its text table ) and assign it to the info object in the update rules?
Sample code would really help.
Thanks.

Hi Thomas,
We've folllowing info objects.
info1.
info2.
Scenario : We weant load text data from info1 to info2..
Crate Export data source for info1.
Go to info2 : insert this info object as a data target.
Assigin source : info1 export data source.While assigning it'll ask do u want Attr or Text .Say text .
Plz assign points if it is useful.
Thanks,
Vijay Sekahr Reddy.

While Loading Master data from BW Info Object

Hi,
What is the difference between the two options
"set filters by Attributes AND Hierarchies" and
"set filters by Attributes OR Hierarchies"
when we load master data attributes/texts from BW Info Object.
can someone please explain in detail with example.
Thanks,
Rishi

Hi Rishi,
While looking at your question -
What is the difference between the two options
"set filters by Attributes AND Hierarchies" and
"set filters by Attributes OR Hierarchies"
when we load master data attributes/texts from BW Info Object.
can someone please explain in detail with example.
This is not what you are explaining in second post.
Kindly close old threads properly if your queries are resolved , so that it will helps other.
Shrikant

Master Data load from Info Object

Hello,
Iam tryting to load masterdata from info object using the standard package in 7.5 NW. My requirement is similar to the scenario 3b in the How to load masterdata doc(to prefix and strip the Compounding obj). This is the ssue i am currently facing.
1. When i validate the transformation file , I get an error saying "Duplicate member id'12345'
2. I have spaces in my node name. How am i supposed to give the technical name in the Member id field of the hiererchy tab in the data manager set selection options.
3. text nodes not getting converted to member values.
note: I am able to get past this with out giving the seletion for the hierarchy in the DM package and running the package succesfully ,but i dont see the text nodes getting converted to member values.
Please provide me some useful insights. had anyone had a similar issue??
Thanks,
Simi

Simi,
Did you checked YES to import the Text Nodes ... and even the Short Text in Language Tab under the SET SELCTION of the info object.

Reading the master data for an info object

Similar Messages

Maybe you are looking for