Reading the .rno files

Experts,
Here is my requirement. I am getting below menction file with extension (.RNO)
XI needs to read that file and map to ORDERS05 Idoc send to R/3 system.
this file includs digital certificates also. I see they are couple of tags in this file which supports for RossettaNet message but not all the tags.
Can any one please help me out of this, How to read a file and configure the sender RNIF adopter.
I am looking into the Rossettanet.org site to townload the XSD / DTD I did not found any documents which matchs the below file.
Thanks
M
      >+Message-ID: <1156308243.1021285684863.JavaMail.SVCEBUSb2bqa@QAEBB2BE2>
MIME-Version: 1.0
Content-Type: multipart/Related;
     boundary="----=_Part_286_2110151955.1021285684863"; type="Application/x-ChemXML"
Content-Description: This is the ChemXML business message
=_Part_286_2110151955.1021285684863
Content-Type: Application/XML; RNSubtype="preamble-header"
Content-Transfer-Encoding: binary
Content-Description: This is the Preamble Header part of the business message
THIS IS A TEST****DO NOT SHIP*****THIS IS A
TEST****DO NOT SHIP*****----=_Part_286_2110151955.1021285684863
à0      *H÷
   0   1 0   *H÷
    0      *H÷
     Ë0 10        #l +Æ
ùt`Þñ ÃÃ0
     *H÷
     0_1 0
U    US1 0   U
, Inc.1705 U   .Class 3 Public Primary 342424242423sign, Inc.0     ¿gn's Certification
Practice Statement, www..com/CPS, governs this certificate & is incorporated by reference herein. SOME WARRANTIES
DISCLAIMED & LIABILITY LTD. (c)1997 gn0
     *H÷
      ¸Ã+HõrÍh
³tc»±X¶E"ì ÇN3bZ!$lÀB´E©:ûgð¾ ÕH kË7Kæ}ýxÿÂüÙU 1fF} x`ôUÔlUÈibp|M¶ ÈCÌ (ÕÑÍFPã1f $ J[Kf^eU _7®0 0 û
      c±hzÎ Ú7â²ª0
     *H÷
     0º1 0   U
gn Trust Network1 0   U    gn, Inc.1301 U   *gn
International Server CA fsfsfsfasdfs- Class 31I0G U   @www.gn.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97 gn0
0
20114000000Z
030114235959Z0½1 0fasfsaf       U    US1 0   U        Tennessee1 0   U        Kingsport1!0   U
Chemical Company1 0   U        eBusinessafasfasfss1301 U   *Terms of use at www.gn.com/rfssasfasffpa
(c)001 0   U    B2BQA.EASTMAN.COM00
     *H÷
      0 ·ÖûkZû×M¢,eKaø© & ¼ôb N ²ofLj3:
fascà ¤Í³Hðm¤< °¨öNØçÁ"¥XY ¯^À ¬3üb M :I(=«°ß?§ éÜAÍ%a àµ ¾ ÅN² ';HÎåb.eÊhß ÇÍ t:[   £ 0 0       U    0
0¬fas U   ¤0¡0 `H øE    00( +         https://www.gn.com/CPS0b +       0V0   gn,
Inc.0 f    =gn's CPS incorp. by reference liab. ltd. (c)97 gn0      `H øB       @0( U % !0
`H øBasf    +         +       04 +        (0&0$ +     0 http://ocsp.gn.com0F U   ?0=0; 9 75http://crl.gn.
com/Class3sInternationalServer.crl0
`H øE           8088983810
     *H÷
Óc¹§ iF2®fasÊ V/eV¡r 1%ÐL_ Ö<¢ ½ ¡&!±À ø ØI,u w) Àju?TÍ°¬þG Æu²ÿF+Ð)×d_ªS²«Y N¨¨ dqÈ$ê2° |Ë<¯ ¢ÈdU3¬°{á¡6xw¬
aÂs·rÚ1 Ô0 Ðf   0Ï0º1 0   U
gn Trust Network1 0   U    gn, Inc.1301 U   *gn International Server CA
- Class 31I0G fU   @www.gn.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97 gn c±hzÎ Ú7â²ª0   *H÷
    Y0
*H÷
      1      asfasfas*H÷
   0      *H÷
      1
020513102804Z0      *H÷
      1   @×êòÍ`"¯FLý}0
     *H÷
Ñïê!W¿ÒôÎ¶&Êya³
Ysfsfasfasfas90 nG(§áWüoþú°þ}5(°µíÕ Ñ2!jèSñ U´.ñ Ù/êkQòBï /}At q ê{Ùò)êÏ#¦ *?v
é;Ú f&Tu å 1 &2ì[[Q Í ¿Â Z
Message was edited by:
        Murali Babu Pallabothula

Sandro,
Thanks quick response. I did posted in indusytry specific too..
Thanks
M

Similar Messages

Powershell script - how to read a registry hive and store the value in text file and then again read the text file to write the values back in registry

Hi All,
powershell script Method required to read a value from registry and then taking the backup of that values in some text file.
For example the hive is
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment\Path
and under path i need to take back up of values in some text file and then put some value in the registry after back is taken in text file.
Also how to read the text file values so that we can again write to registry hive back from the back up text file.
Your help is much appreciated.
Umeed4u

I think you need to read this first:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/a0def745-4831-4de0-a040-63b63e7be7ae/posting-guidelines?forum=ITCG
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next

I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next time is launches. I get the same message the next and every subsequent time it launches so I can't launch LR at all now.
I get that the preview file got corrupted somehow. Is there some way to fix this problem without building a new catalog?

Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You need to delete that folder and then start Lightroom again. Lightroom will generate a new previews folder.

Not able to read the wsdl file from server Premature EOF encounter

Hi All,
I am facing issue while accessing a web Service from server. Here is the clear view about it.
I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
Now here i am facing peculiar behavior which i am not able to trace it out.
1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
Can someone please help in resolving the issue.
I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
Many thanks.
Tarak
Edited by: user11896572 on Jan 17, 2012 5:22 PM

Hi,
Setting default from the jdeveloper -
During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
Setting default from the em console -
After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
Refer -
http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
8.2 Managing the State of Deployed SOA Composite Applications
Thanks

In Vista, Applet isn�t able to read the property files

I�m working on internationalization; the Applet which I�m using wasn�t able to read the property files properly in windows Vista machine. But if I create a jar which contains all the classes and property files, Applet works fine.
This problem is only in Vista machine ,In XP the JVM is smart enough to read plain .property files and its works well without creating the jar
Is that related to any security enhancemence of vista over XP?
Below is a link about The Java Security Model break on Windows Vista
http://bugs.sun.com/view_bug.do?bug_id=6548078
I tried a simple ResourceBundle.getBundle() in my Applet in different ways but nothing work fine for me. It isn�t an issue related to path, I guess because I tried several ways like.
ResourceBundle labels = ResourceBundle.getBundle("LabelsBundle");
ResourceBundle labels = ResourceBundle.getBundle("LabelsBundle",currentLocale);
ResourceBundle labels = ResourceBundle.getBundle("com.test.LabelsBundle");
ResourceBundle labels = ResourceBundle.getBundle("com.test.LabelsBundle",currentLocale);The exception got in java console is
CONFIG: [2008-05-13 15:54:57.909]:(com.satm.insite.InsiteApplet$2@1696e4c):InisiteApplet: Exception: java.util.MissingResourceException: Can't find bundle for base name LabelsBundle, locale en
java.util.MissingResourceException: Can't find bundle for base name LabelsBundle, locale en
            at java.util.ResourceBundle.throwMissingResourceException(Unknown Source)
            at java.util.ResourceBundle.getBundleImpl(Unknown Source)
            at java.util.ResourceBundle.getBundle(Unknown Source)
            at com.satm.insite.InsiteApplet.displayValue(InsiteApplet.java:261)
            at com.satm.insite.InsiteApplet.callme(InsiteApplet.java:296)
            at com.satm.insite.InsiteApplet.initialize(InsiteApplet.java:327)
            at com.satm.insite.InsiteApplet$2.run(InsiteApplet.java:235)
            at com.satm.tools.languageTools.ThreadPool$ExceptionCatchingThread.run(ThreadPool.java:226)Is there any way to make it work in Windows Vista machine�? This could be a great help for me.
Thanks
Robert

Crossposted:
http://forum.java.sun.com/thread.jspa?threadID=5295743&messageID=10250558#10250558
http://forum.java.sun.com/thread.jspa?threadID=5295742&messageID=10250556#10250556

How can I read the bootstrap files and extract the fragment-URLs and fragment-numbers in plain text?

How can I read the bootstrap files of any HDS Live stream and extract the fragment-URLs and fragment-numbers in plain text?
Could it be that it is some kind of compressed format in the bootstrap? Can I uncompress it wirh f4fpackager.exe? Could not find any download for f4fpackager.exe. I would prefere less code to do so. Is there something in Java of JavaScript, that can extract the fragment-numbers?
Thank you!

Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

"Error: Final Cut Pro was unable to read the movie file just captured"

Hello everyone!
We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
We reinstalled the Final Cut Pro software all over again thinking that maybe the software got corrupted and we also rectified any disk permissions for the hard drives.
Any ideas?
Thanks
Efrain
G 5 Mac OS X (10.4.8)

We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.< </div>
You eventually want to figure out how that happened and make sure you fix it.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
<
You reformatted the external drive, yes? You might not have used the correct initialization setting. Should be Macintosh HFS, journalling is optional. Or you have a drive formatted for Winderz.
Aside from incorrect drive formatting, we have seen this error if the capture is incomplete or improperly terminated.
It's not an FCP issue, it's hardware.
bogiesan

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

Is there any way to read the pdf file in java

Hai,
i need some advice from anyone that is there anyway to read the pdf file directly from java...
Without converting to other files(txt,html)
if it is possible please help me..
Thank you

Or use the Adobe one (search the adobe site). Or search this forum, this is one of the Top Ten Qestions Asked here.

Please help me in reading the ascii file in encoded format

hi ,
iam trying to read the ascii file and i need to encode the text file, can u suggest me what arre the different methods are availble for me to encode the text file, please suggest me which is the effiecient method tto use?

This question has been answered before, please search the forums in future.
You could do something like this, it probably not the most efficient though.
If you don't need to do it in code then the native2ascii does this conversion see: http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/native2ascii.html
        public static void convert(String vsFile) throws IOException
          File f = new File(vsFile);
          FileReader fr = new FileReader(f);
          char[] buf;
          int bytesRead = 0;
          int startAt = 0;
          String content = "";
          do
               buf = new char[512];
               bytesRead = fr.read(buf, 0, 512);
               startAt += bytesRead;
               String tmp = new String(buf);
               content += tmp;
          while (bytesRead == 512);
          FileOutputStream fout = new FileOutputStream(f);
          OutputStreamWriter out = new OutputStreamWriter(fout, "UTF-8");
          out.write(content.trim());
          out.flush();
          out.close();
     }

Problem in reading the excel file path in WINDOWs machine from UNIX environ

Hello friends,
My requirement is to read each row of the excel sheet and sent that row to the database. I have implemented it by using jxl and apache poi framework. locally in my WINDOWS machine it is working fine..
But when i deploy the code in UNIX machine. My application runs on a Unix server , trying to read the excel file in WINDOWS environment. I am not able to retrieve the file path. for ex : C:\Documents and Settings\sabbanik\My Documents\KARUNAKAR\excel.xls
I am getting error in this line
workbook = Workbook.getWorkbook(filepath)
Error message : input file not found.
Thanks in advance..

You said: I am getting error in this line workbook = Workbook.getWorkbook(filepath) >
Based on this, I will assume you are trying to use OLE to access information about the Excel file. As mentioned by Andreas, your code will be executing on the server (Unix) and since Excel isn't on the server (and cannot be) an error will result. OLE can only be used in Windows environments (client or server). To access client side OLE calls and content, you need a java bean and Excel installed on the client machine. Oracle provides WebUtil as an option to writing your own Java Bean. To use this, you will need to be running Forms 10.1.2 or newer. Details can be found here along with a demo:
http://www.oracle.com/technetwork/developer-tools/forms/webutil-090641.htm

Reading the xml file in customized table.

Hi Experts ,
I have a requirement to read the xml file in one "z" table . Can anyone let me know the exact steps .
Thank you
Ashutosh

Hi Ashutosh,
1. First read the file in BINARY MODE into an XSTRING.
2. Then use the method create_istream_xstring to create the input stream
3. Then you need to create the document tree and the parser
4. Once your Document tree and your parser are created now can use the document tree to access individual elements.
Some Class interfaces that maybe helpful to you are as follows: if_ixml_node, if_ixml_node_iterator, if_ixml_element....etc
DATA:o_ixml                    TYPE REF TO if_ixml,
           o_streamfactory   TYPE REF TO if_ixml_stream_factory,
           o_istream              TYPE REF TO if_ixml_istream.
           o_parser               TYPE REF TO if_ixml_parser
           o_document          TYPE REF TO if_ixml_document
o_ixml = cl_ixml=>create( ).
o_istream = o_streamfactory->create_istream_xstring( string = <give the xstring name here>).
o_document = o_ixml->create_document( ).
o_parser = o_ixml->create_parser( stream_factory = o_streamfactory
                                                                       istream = o_istream
                                                                   document = o_document ).
You can make the final code as dynamic as possible to read into an internal table.
Regards
-Joe

Elements 7 on windows 7, have downloaded a new version on raw for my new camera eos50d still unable to read the raw files help

Hi
Hope someone can help me with this one, have a new computer with windows 7 as the operating system, have installed elements 7 and have now purchased the 50d, as i shoot in raw have tried to open the file but elements is unable to read the raw file, have looked on various threads and have downloaded the new version of raw, this version is saved in my download file directory, have copied across these files to the elements folder but i still cannot read my raw file for the 50d, is there something i have missed.
collisa

please have a look at the folllowing link about the isntallation of the camera raw plugin.
http://kb2.adobe.com/cps/407/kb407344.html
be sure not to have the older version of camera raw plugin in the same folder as that of new one. dont even rename it. Remove it and store it in some other location in case you need to revert back the changes. The camera raw plugin is called : Camera Raw
thanks

Can I read the dd file without the device

Hello,
Is it possible to read the DD file in Configurator 3.1 without connecting to the device?
The short version of the story...... I have only used the configurator a few times and was walked through the process. Now I need to figure out how to control a positioner (DVC6000f), I just need to stroke a valve open, closed and position it somewhere between the two. I am not able to connect to a positioner right now, so I would like to load the DD file into the configurator and look around to see if I can figure out how to give it a position command signal. Once I am able to stroke the valve I will need to write a simple LabView program to make it easier than the configurator program.
What is the best way to figure out which block I need to position the valve? I am hoping when I actually connect to the positioner it will be obvious, but life is usually not that easy.
Bryan

Hello Josiane,
Thank you for the information, I was able to load the DD and look around the configuration blocks. Initially engineering only asked about simple control of the valve, today things have changed. I found out that there are to be many tests performed on the valve including sine wave response, step testing, Hysterisis, linearity, dead band, and some others.
So my question now is how well can I control the positioner by writing a Vi in LabView? I can perform the above tests on a positioner with a 4-20mA output signal from my DAQ. Would it be possible to write the 4-20mA output signal into an input block (instead of an analog output channel) and control the valve in real time? I could just change the mA signal into whatever units the positioner wants. Or what would be the best approach to control the valve for testing?
Is there a number I can reach for support? It might be easier than email.
Bryan

How to read the properties file available in Server File structure in webdy

hi all,
I have developed one webdynpro application. In this application i need to access mdm server to continue. For getting the connection i need to pass the IP addresses.
Can i have code how to read the properties file which is residing in the server file. with out included along with the application. keeping some where in the file structure in the server. I want to read that properties file by maintain the iP addresses and users in properties file based on the key i want to read like below.
servername="abcServer"
username="john"
password="test123"
Please send me the code how to read this properties file from the file structure and how to read this values by key in webdynpro application
Regards
Vijay

Hi Vijay,
You can try this piece of code too:
Properties props = new Properties();
//try retrieve data from file
//catch exception in case properties file does not exist
try {
         props.load(new FileInputStream("c:\property\Test.properties")); //File location
         String serverName = props.getProperty("servername"); //Similarly, you can access the other properties
         if(serverName==null)
           //....do appropriate handling
     }     catch(IOException e)
               e.printStackTrace();
Regards,
Alka.

Reading the .rno files

Similar Messages

Maybe you are looking for