Reading the word doc from UI

Hi,
I have a requirement to open a word document in html and edit it and when he clicks a button on UI i have to take that document stream to the server and store it on the server. can anybody help me on this.

I'm not sure if there is any possibility to open a word document in html and edit it. You can take a look at this WYSIWYG Editor as it might help: http://tinymce.moxiecode.com/

Similar Messages

  • CPU Usage - Generating Word Docs from RoboHelp X5

    If you have generated a fair-sized document through RoboHelp,
    and you are having problems with your CPU usage pegging out around
    100%, bouncing up and down between 50% and 100%, the page
    repainting as you scroll through the document, etc., this solution
    is for you!
    I am using RoboHelp X5 to generate large Word documents
    (2003). This solution worked perfect for me. The problem is with
    document corruption, apparently. After you have generated your Word
    document and opened the document, be sure to display the paragraph
    marks. You will probably see the “]” mark at or near
    the end of the document. Select your entire document,
    except for the final paragraph mark, making sure to exclude
    this symbol, and copy everything else. Open a blank Word document
    and paste this content into the new document.
    You will now need to reattach your template (.dot) file for
    the generated document through Tools/Templates and Addins:
    1. Locate the applicable document template and attach it
    (it's typically in the base generated project directory in RoboHelp
    - .dot file). Click the OK button to save.
    2. Return to Tools/Templates and Addins. Click the Organizer
    button to display the Styles tab.
    3. In the right-hand list (In Normal.dot), Close the
    Normal.dot file
    4. Open the same RoboHelp .dot template as you selected
    previously.
    4. Select all of the styles once they display in the right
    pane and click the <<Copy button to copy them all over to the
    document template. Confirm that you want to replace all styles in
    the document.
    5. Close the menu using the Close button. The dialog closes
    and your styles should all be updated, if your styles were set up
    appropriately via template and style sheet settings.
    You may need to also adjust the Page Setup page width
    settings, if necessary.
    Good luck!
    Liz0259

    Peter:
    Thank you for responding to me, as I may not have been clear
    enough, and I apologize for that. I was trying to keep it short and
    sweet. This problem started when I began using RoboHelp X5 this
    year.
    To clarify...
    - I'm not concerned with CPU usage during document
    generation, that is to be expected. The document will need to be
    generated originally from a RoboHelp WebHelp project. This does not
    change. The problem takes place AFTER you generate a large document
    and then open it in MS Word.
    - My documents are large, 140-500 pages. It took forever to
    scroll through the Word document (RoboHelp-generated), the screen
    kept repainting, and the CPU usage stuck fluctuating frequently
    between 50% and 100%, not allowing me to do much else. Editing
    those documents was a nightmare. Even if I shut down all other
    programs.
    - Something translates to the Word doc from RoboHelp that
    maxes out the CPU usage, and I can't locate the exact culprit.
    However, it appears to be tied to the faded "]" symbol at the end
    of the document (there is a "[" at the beginning, too). So you have
    to omit more than the last paragraph mark; that symbol also needs
    to be left out.
    - The "corruption" information came from Microsoft; it could
    be something other than that, but this is what they said. I found
    nothing that would help on the RoboHelp forum, so I went to
    Microsoft to see if they had a solution. Apparently, this is a
    common problem with Word 2003, but the articles didn't mention
    RoboHelp in the issues. I tried this solution, adding the omission
    of the "[" symbol, with complete success.
    - When you copy the document without the last paragraph mark,
    it will still include the headers/footers when you paste it
    (although you may need to adjust them slightly). This is not the
    problem.
    - When a document is generated, you can select to use a MS
    Word template, which I do. I fully use the style sheets in
    RoboHelp, and they match my Word styles (template) to keep things
    in sync. Actually, this Word template remains in the project; it is
    not moved to the folder that holds your Normal.dot file. So the
    link to the template in RoboHelp from your document does in fact
    remain intact. However, you can copy that template to another
    folder outside the project and link it from there, but it won't
    matter.
    - The Word template (.dot) needs to be reapplied in order to
    restore your styles, as the Normal.dot styles are applied when you
    copy the content over to a new document. It doesn't matter where
    you store the template. I reapply this SAME template after I copy
    and paste the content into the new document. This is not the cause
    of the problem. Note: The application of a template is not the same
    thing as going back to the master copy. This is still a fresh
    document, with the content pasted in and the same template applied.
    - I have tried deleting the local copy and starting over. I
    have moved the file to another location. I have renamed or created
    a 'save-as' copy of the file. I tried editing out any extra
    un-necessary merge-tags in Word, looked for macros, etc. All of
    these things do not resolve the CPU Usage problem.
    I hope this makes more sense. You can try it out if you wish,
    but you will need to do this with a large document and use the
    Print View when looking at the document in Word. You'll have less
    of a problem in Normal View, or with a smaller document (under 50
    pages).
    Good luck!
    Liz0259

  • Why can't I edit the Word doc I converted from a PDF?

    Why can't I edit the Word doc I converted from a PDF?
    Help! That is why I bought this software!

    Hi linda007,
    If you can't edit the file once it's converted to Word, it could be that the PDF was created from a scanned page, and then image text wasn't converted to searchable text. ExportPDF should perform Optical Character Recognition by default, but it can be disabled in Reader. Do you know whether OCR was disabled when you converted the page? If it wasn't, make sure that the correct language was selected for OCR. This option appears at the bottom of the ExportPDF panel in Reader, and in the Document Language (for Text Recognition) pop-up menu that appears after you select your file to convert in the ExportPDF online service.
    If everything seems to have been set correctly, and you still can edit the text, please try triple-clicking to select the text in Word. Did that do the trick?
    Best,
    Sara

  • Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

    Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

    Where to begin... and why would you ask here? (workstation owners)
    Places I can think to try, after google of course....
    Forum devoted to something like Word / Mactopia or Pages.... whether you are using Office 2011, and no idea what browser or webmail (IMAP, Gmail, other)
    And then there really are notebook with subforum for MacBook Pro
    Apple Site Map
    Apple Support Mail
    Apple Support

  • Problem in opening MS Word doc from CRM back-end.

    Hi All:
    I have a MS Word document stored in my CRM system which opens by passing a transaction number as input. When we try to preview the word
    doc it opens properly from back-end.
    But the real problem exists when i'm trying to open it from my web-dynpro thru java, it never opens in a correct format(i mean it never opens at all). When I stored it in local machine to open it from notepad, i could see all the junk data along with original text.
    If any one have done this successfully before, plz do let me know the way or send me the code sample to read word from webdynpro java. I've implemented with couple of options which didnt worked.
    Munna_SAP

    Hi All:
         I've solved it by my own and it opens the word document properly.
    Solution: I didnt looked at the r\3 end that how it was coded, i've changed my code in java to meet the requirement.
    Tnx,
    Munna_SAP

  • Word docs from pc to iPad

    I can't figure out how to share a word doc from my pc to the iPad. I went through the steps in the manual but can't find the file share option they talk about in the app tab on iTunes. Any ideas?

    Do you have Pages installed on your iPad? If not, I'm not sure that file transfer option will appear, though I'm not certain; perhaps someone else here can confirm or refute. If that is indeed the case, then you'll have to email the document to an account your iPad can pick up, or get Pages or one of the other iPad apps that supports Word docs and provides a file transfer capability.
    Regards.

  • How to upload a Word doc from MacBook to iCloud?

    How to upload a Word doc from MacBook to iCloud?

    Just going to throw in again: iCloud is to keep's Apple's products on Apple's devices synced up between multiple devices. It isn't for sharing. It isn't for storage.
    iCloud is the Apple-branded cloud (see the "i"). It isn't meant to be a completely free-of-charge realization of the future that all the tech people keep calling "the cloud."
    It adds a lot of very nice functionality to Apple's own products, yet people are screaming their heads off about not getting free disk space and free bandwidth to use for whatever they want online. Apple added functionality, but tons of people seem to think they took away functionality. These things were never promised with iCloud.

  • This operation has been canceled due to restrictions in effect....opening Word docs from link in web page

    It's the ahla.org website.  It has both pdf files and Word docs.  The pdf links open in the browser or Adobe but the Word doc links open the option at the bottom of IE11 that just says "Open" or "Cancel".  When I choose
    open, it gives the error about policy restrictions or something similar depending on if it's Word 2007 or 2013.  If I could even find an option to have it "Save" and open after download that would be helpful.  I can right click the link
    and choose save as but this is an office full of attorneys and they can't find the download folder afterwards.
    This isn't the issue with Chrome being installed/uninstalled because it does it on computers where it's never been installed.  It's not a group policy setting as it does it at the office or home PC.

    Hi,
    ahla.org redirects to
    https://www.healthlawyers.org/Pages/home.aspx
    ... its a mess
    eg. the login link is http://admin.healthlawyers.org:8080/_login
    any error message with "Restriction" in it is from Group Policy.
    what you can try
    Tools>Internet Options>Security tab, click "Reset all zones to default"
    Trusted Sites icon, sites button, remove ANY reference to
    http://ahla.org or http(s)://www.healthlawyers.org (IE has security restrictions preventing navigation between sites of lower integrity).... Other userAgents do not use the same security model as MSIE.
    the https protocol (secure web sites) works in any IE security zone.... If a site uses https, you do not have to place it in the Trusted sites list. It should work (encrypt) just as well in the internet zone (default).
    Hover the mouse over the pdf/doc hyperlink... its uri will appear in the status bar or at the bottom of the IE window... note its address. IT MUST point to the healthlawers.org domain. It should also be using the same protocol as the current web page. If it
    uses the https protocol, check "Internet Options>Advanced tab, uncheck "Do not save encrypted files to disk"
    As I said.... it is likely that the above settings are controlled by Group Policy.
    Rob^_^

  • Opening up a Word Doc from a Link in Dreamever

    I am trying to Open up MS Word from a Button /hyperlink on a
    nav menu on the web site that is linked to a MS Word Template. I
    have tried many different ways but still can't accomplish this. Any
    Help would be greatly appreciated .
    TIA
    Guy

    what ways have you tried?
    what does or doesn't happen?
    suggestion:
    place a copy of the word .doc file within this site's Local
    Site Folder.
    Rename the file if needed, to get rid of blank spaces or
    punctuation marks.
    Make the link to it in the page with dw.
    upload the page.
    upload the word .doc file
    done.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Reading ams word doc and creating another ms word doc with this same data

    I have a ms word doc and i hav to create different word docs from it with different name.The docs will contain the same data as the mother document but some cases,some strings will be replaced by some new strings for each document to be created.plz help me out.
    File ReadDocFileInput = new File(inFilePath + "APX-DBEST.DOC");
    BufferedReader readXML = new BufferedReader(new InputStreamReader(new FileInputStream(outFile)));
              String FirstTag = null;
              String writeIntoDoc = null;
              String writeTagName = null;
              String writeTagSTEPName = null;
              File WriteDocFileOutput = new File(inFilePath + "APX-DBEST-" + writeTagName + ".RTF");
              BufferedReader fis = new BufferedReader(new InputStreamReader(
                        new FileInputStream(ReadDocFileInput)));
              //FileInputStream fis = new FileInputStream(ReadDocFileInput);
              //FileOutputStream fos = new FileOutputStream(WriteDocFileOutput);
              PrintWriter fos = new PrintWriter(new FileOutputStream(WriteDocFileOutput) );
              //int i =0;
              //char ch;
              while((writeIntoDoc = fis.readLine())!=null){
                   //ch = (char)i;
                   fos.write(writeIntoDoc);
              fis.close();
              fos.close();
              //WriteDocFileOutput.renameTo(new File(inFilePath + "APX-DBEST-" + writeTagName + ".DOC"));
    this is the code i hav written...anything wrong in it?...it does not working.

    I didn't read your code. But if you want to copy a file, commons has a neat tool for it:
    import org.apache.commons.io.IOUtils;
    import java.io.*;
    class CommonsFileCopy {
        public static void main(String[] args) {
            String fIn = "CommonsFileCopy.java";
            String fOut = "(copy) CommonsFileCopy.java";
            try {
                InputStream inStream = new BufferedInputStream(new FileInputStream(fIn));
                OutputStream outStream = new FileOutputStream(new File(fOut));
                IOUtils.copy(inStream, outStream);
                System.out.println("Copied \""+fIn+"\" to \""+fOut+"\" successful");
            catch(IOException ioe) { ioe.printStackTrace(); }
    }

  • Why can't I open word docs from mail anymore?

    Am on 10.8.2 on Macbook Air and doc and docx attachments tell me to choose application to open the doc with and won't open when I choose "Word"
    These used to be opened automatically by Word, not I have to manually choose Pages as the only option
    Am I missing something?

    Csound1 wrote:
    Andy Mt P wrote:
    Don't see how I can choose the file from within Word as it's not saved anywhere?
    I have now discovered if I drag the file from mail on to the WORD icon in the doc it will open....seems much clumsier than the old option of clicking on the file to open it
    Opening attached pics seems to require the same action as well using iphoto.
    A bit of a step back in my opinion....
    Save the word file from the email to your Mac (have you never saved an attachment before)?
    Post back when you can do as I asked you to.
    And remember that we are trying to find out what is wrong, don't be so snappy!
    haha...point taken. Wasn't feeling 'snappy' when I typed it, not intended as such...!
    If I save it somewhere as you suggested I can then open it
    also, as I mentioned if I drag the doc onto WORD in the dock it opens that way as well

  • Not able to read the wsdl file from server Premature EOF encounter

    Hi All,
    I am facing issue while accessing a web Service from server. Here is the clear view about it.
    I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
    Now here i am facing peculiar behavior which i am not able to trace it out.
    1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
    2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
    3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
    I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
    I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
    Can someone please help in resolving the issue.
    I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
    Many thanks.
    Tarak
    Edited by: user11896572 on Jan 17, 2012 5:22 PM

    Hi,
    Setting default from the jdeveloper -
    During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
    Setting default from the em console -
    After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
    Refer -
    http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
    8.2 Managing the State of Deployed SOA Composite Applications
    Thanks

  • How do I convert a read only word doc to a read only pdf file?

    How do I convert a read only word doc to a read only pdf file?
    Thanks, Linda

    Hi Linda,
    I just tried it, and was able to convert a Word .doc to to PDF, in spite of the fact that it was marked Read Only. Here are the instructions for uploading and converting to PDF with Acrobat.com:
    http://help.adobe.com/en_US/Acrobat.com/Acrobat/WS396AAA88-4AA4-4a40-87B8-004A5DC1E131.htm l
    Kind Regards,
    Michelle

  • Importing Word docs from a RH for Word project

    I have a HUGE RH for Word project that I'm trying to convert
    to RHTML (RH Office X5). We generate CHM with this project, and
    we've got map ids for all topics. I've been to Peter Grainge's site
    to get some ideas, but I don't think they're going to work. There
    are so many Word files and topics (537 and 2,974, respectively)
    that the more I think about it, the more I think that a conversion
    to RH HTML might not be worth it.
    When I tried to import all of the Word documents and also
    convert the TOC (converting the Index isn't an option since it
    never worked with our large number of Word docs) and use the
    HTMLHelp.css (using the Import wizard), RH HTML crashed twice after
    40 minutes.
    So, I created a new RH HTML project and tried to import just
    one Word doc from the RH for Word project, and selected the same
    wizard options. As I expected, the Word doc imported, but even
    though I told RH to split the topics on Heading 2, it also copied
    in the characters (#S+@) that preceded every topic heading and
    incorporated them into the Topic Title. AND, RH HTML did not
    "convert" the TOC - it was blank.
    In another post I saw a reference to this patch -
    http://www.adobe.com/support/security/bulletins/apsb07-10.html.
    I'm not sure it's related, although when I examined my second
    failed import attempt, the imported topics were visible in the
    project folder only by using Windows Explorer - RoboHelp HTML did
    not display them from within RoboHelp.
    Does anyone know if this is the patch that will fix this
    issue as well?
    By the way, based on the number of questions I've seen posted
    about RH for Word 7 with zero replies, I'm thinking I'm going to
    run into issues as well, even if we leave it in RH for Word when we
    upgrade to version 7. It seems that its size is an issue for RH
    HTML.
    Thanks,
    Jim
    Thanks,
    Jim

    Hi Jim,
    just as an encouragement: we sucessfully converted a HUGE RH
    for Word project (4,300 topics) to RH HTML a while ago, including
    TOC, index and everything. I must admit though that we had all
    those topics in only 25 word documents. Maybe you can reduce the
    number of documents by moving the topics? There will always be
    problems you run into and afterward, we had to go through every
    single topic and check the formatting, but I guess you'd always
    have to do this. But I think it's worth it, working in HTML is so
    much more convenient.
    Good luck!
    Kathrin

  • After having shut down after installing updates, when I restarted and tried to open a word file, it started opening ALL the word docs and the only way I could stop it was by"force quit"  arted  and tried to open

    After having shut down after installing updates, when I restarted and tried to open a word doc, it started opening ALL the word docs and the only way I could stop it was by"force quit"  . This is REALLY annoying!!

    May be it is the Resume feature.
    System Preference > General > Number of recent items
    Uncheck the box next to      "Restore windows when quitting and re-opening apps".
    Best.

Maybe you are looking for