Readline support in ngspice package?
This morning I installed the ngspice circuit simulator package from community and was suprised to note that it was compiled
without readline support.
It was fairly trivial to add it to the './configure' line in the pkgbuild and compile it by hand, but is there a reason it wouldn't be enabled by default? Command-line editing is a pretty basic/fundamental feature (for me at least).
Post a comment on the package's page in the AUR, or a feature request in the bugtracker. There is no guarantee that the maintainer will see your post here.
Similar Messages
-
I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - RickHi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Hi,
I just try to install the setup download from apple website for iTune and iCloud.
During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
Anyone can help on this??????
Thanks.
JustinI have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.
-
I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!
I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP! -
I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits
There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
what do i do when trying to install itunes to my windows vista home basic computer and a message appears saying
"There is a problem with this windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
Need to know because this is driving me nuts now!Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I accidentally removed the Bonjour service from my system a few weeks ago, but my iTunes continued to work. Now I have no iTunes and I don't know how to fix it. SOMEONE PLEASE HELP!!!!
a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
(i'm not on windows, so i can't test...)
good luck!
j.
Correct Answer by Peter Lepere on Oct 14, 2011 3:07 AM
Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I Tunes will not install. I get this error message: There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Does anyone have an answer?
TRy the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I got the iPod touch, when i went to connect it to my computer to upload my music to it, It said that I need to upgrade to 10.5 but when I did I got the message below. So I tried uninstalling itunes and quick time and I cant download it at all and still get the message below. I have NO itunes on my computer now. =(
The message I get is::
There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
I have no idea what this message means or what to do....There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
How to update ITunes on my PC (Windows XP)?? Repeated attempts produce this messsage: "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have an older version of ITunes on the computer. Why can't I update it?
MMettlerRepair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL/ > Add n Remove Programs, highlight ASU and click CHANGE then REPAIR
Maybe you are looking for
-
Hi, My RAW (.NEF) files will not open in Photoshop CS2. Everytime I try to open a raw image it says... "Could not complete your request because Photoshop does not recognize this type of file" Don't know what to do. CS2 on OSX 10.5.8 with Nikon D90 ph
-
Hi all, can anyone tell me how to keep 16:9 aspect ratio when burning a DVD in toast. It keeps the exported .mov squeezed. I have been using DVDSP but toast would be much more efficient if it can be done. Cheers for any input, Si
-
I need a bit of info with the below topics. Q1. What is a Rogue AP? Q2. WLC 4400 is detecting a number of rogue access points from neighboring buildings. How should the WLC 4400 deal with these rogue access points? Q3. Can the WLC 4400 block these ac
-
How to create Returns against an order for which Credit memos exist
Dear Gurus - I am getting error message 'Credit memos already exist for item 000010: 1 PC' when trying to create a return order against a standard order for which I have already created a credit memo request. Following are the detailed steps: 1) Crea
-
Best Terminal Emulator For Fluxbox?
What is the best terminal emulator for Fluxbox? What do you guys use? What looks the nicest? What has transparency? Right now I'm using gnome-terminal but I don't want gnome installed on my system. I'm also using thunar to manage files.