Ready to print. Now, how to send this to the printer?

Hello Again,
The little program is 5.5 x 8 inch pages (letter size paper folded in half). They must to
print it in 4 pieces of paper letter size, put them together and then fold them in half, (staple it).
I am using 1/4 inches in bleed and I would like to have crops marks. Must to be PDF!
I have no idea how to send this to the printer. Any help?
Thanks a lot!!
Jesus

First, ask your printer.
Second, printers generally want unimposed PDF. IOW, export regular pages and let your printer arrange them the way they want it.
But definitely ask them first. And make sure you mention the bleed.
Ken Benson

Similar Messages

My Mac is set to print in grayscale by default and I am not sure how to change this. The print setup defaults to Colorsync under Color Management and Colorsync is stuck on Mode "Gray"

My Mac can print color if I change from Colorsync to "in printer" or if I manually change the colorsync profile, but this has to be done every print and is quite time consuming. Can someone help me change the default Colorsync profile or change Color Mangement to default to "in printer"? After 3 days of this I am already tired of this, And before it is asked I do not know what has changed to cause this. Wednesday was the first time I had needed to print on this particular Mac since March and it was already stuck in grayscale.

You can select your preferred set of printing perferences and "Save as Default".
Or you can blow it all away and "Reset the Printing System" which takes you back to NO printers installed, and add the Printers back in.
To reset the printing system (if necessary)
Control-click or right-click a print queue in the "Printers" pane.
Choose "Reset printing system..." from the contextual menu.
Click "OK" in the "Are you sure..." confirmation sheet
This un-installs all printers. You can then add them back in one at a time, and they should come in with default settings.

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

You're welcome.
But, no, don't look to Epson for fixes to their driver in newer versions, and Adobe has deprecated the TWAIN plug-in. Hoping for a solution there is futile. That has not happened and it's never going to happen. The consensus is that it's pretty foolish to tie up Photoshop to scan. Honestly.
Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever. When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software. If you think about it, its most inefficient.
VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist. VueScan is not free, but it's a pretty good value, IMO.
As for the Epson CD printing software, I have no clue. Sorry.

I change my computer. Now Photoshop element send this message erreur:150:30. How can I fix it?

I change my computer. Now Photoshop element send this message erreur:150:30. How can I fix it?

duplicate post, see:
my computer(mac) was broken, I buy a new one. Photoshop element (buyed on ligne from adobe) does not want to open now.

HOW TO SEND XML BACK TO PRINT? (See Inside thread for more info)

Hello Everybody,
Because there is not a lot of documentation on if_fp and if_fp_pdf_object
I found out that i can retrive my PDF from the ADS with the following code:
    data:
    lo_fp                 TYPE REF TO if_fp ,
    lo_pdfobj             TYPE REF TO if_fp_pdf_object,
pdf_xstring           TYPE xstring,
    xml_data              TYPE xstring,
    lv_xml_data_string    TYPE string.
            Get FP reference
lo_fp = cl_fp=>get_reference( ).
            Create PDF Object using destination 'ADS' (<-- this is how it is defined in SM59)
lo_pdfobj = lo_fp->create_pdf_object( connection = 'ADS' ).
            set document
lo_pdfobj->set_document(
EXPORTING
    pdfdata = fp_formoutput-pdf ). " fp_formoutput-pdf is of type xstring
            Tell PDF object to extract data
lo_pdfobj->set_extractdata( )." obsolate!!!
call METHOD lo_pdfobj->set_task_extractdata( ).
            Execute the call to ADS
lo_pdfobj->execute( ).
lo_pdfobj->get_data(
IMPORTING
    formdata = xml_data ).
After this i can manipulate xml_data but dont know how to send it back to print...
Can you direct me to the solution please?
Thank you in advance,
Eran Fox
p.s.:
Component version    SAP ECC 6.0
Unicode System         No
Database system      ORACLE
Release                     10.2.0.2.0
Kernel release           700

Hi Billy
Yikes - how embarassing ! Thanks for pointing out my beginners mistake there. I've fixed my code - and also implemented the substitutions of parameters like you suggested - I like that approach.
Unfortunately the end result is no better - the line
utl_http.read_text(resp,response_text);
Still returns nothing back
The headers that are coming back are
Date: Thu, 04 Jul 2013 08:31:56 GMT
Server: Apache/2.2.16 (Ubuntu)
X-Powered-By: PHP/5.3.3-1ubuntu9.3
Expires: Thu, 19 Nov 1981 08:52:00 GMT
Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0
Pragma: no-cache
Vary: Accept-Encoding
Content-Length: 0
Content-Type: text/html; charset=UTF-8
Connection: close
I guess I will need to try chasing it with the fastsms vendor so see if they can check my incoming request and see if there are any glaring problems. I know the xml is correct as I am now logging the xml string just before I send it and when I take that string and put it in their test form it works perfectly - something else in the puzzle is missing. I've had no experience using utl_http before - perhaps it's no possible to read the xml repsonse using this ?
Anyway, thanks for your help Billy.
ps - How do you paste your code into your message to get that formatting ?
Cheers,
Brent

HT3669 Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this opt

Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this option?

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Update my iPhone 5 to iOS 7 days ago and still neither my iMessage nor FaceTime will let me log in and I am only spastically getting even normal texts. Does anyone now how to fix this issue?

Update my iPhone 5 to iOS 7 days ago and still neither my iMessage nor FaceTime will let me log in and I am only spastically getting even normal texts. Does anyone now how to fix this issue?

ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367

I have changed my apple id, and its ok when i sync my Iphone with Itunes, but ON my Iphone still my old apple-ID is there. I can NOT buy things from Itunes or Upgrade anything now, how to fix this?

I have changed my apple id, and its ok when i sync my Iphone with Itunes, but ON my Iphone still my old apple-ID is there. I can NOT buy things from Itunes or Upgrade anything now, how to fix this?

I recently changed my email address and want to change my Apple ID account to match. I have created a new Apple ID to match the new account but now I can't sign into iCloud on our phones or computer with the old Apple ID. I can't make any changes on iCloud on our phones because it directs me to the old account, which I can't sign into. I also can't sign me in on my computer to make any changes. Help!!! Now I have two addresses and can't access the one that directly affects my devices.

I stupidly signed up for a dumb application ... my bad ... now how do I stop it from printing?

I have the B210, and wish HP had put more effort into better design and printing function that useless stuff. Anyway, I signed up for an app not realizing that it would print whether I wanted it to or not. I deleted the app from the printer, and cannot find any means of stopping this waste of paper. How do I (a) completely eliminate apps from the printer so it never shows again; and (b) stop this thing I signed up to receive? Yeah, I'm dumb and angry. Thanks HP.
This question was solved.
View Solution.

Hi,
I assume you have signed up to a Scheduled Delivery App,
Cancel the subscription by logging the HP ePrint Center:
Always cancel your subscription before removing a scheduled delivery print app from your printer. Log onto ePrintCenter and select the print app for which you wish to cancel the subscription. Click on “Setup,” then “Update Settings,” then choose “Cancel scheduled delivery.” This will cancel your scheduled delivery.
Please let me know if that helps
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I created a navigation page and published as portlet now how to add this pg

I created a navigation page and published as portlet now how to add this page... i dont see in the portlet staging area.... i left the check mark publish as portlet on when i created the page...
how do i add this to the page...

The Navigation Page Portlet should be available in the Portlet Repository - select Published Portal Content -> Your Page Group Name
Lisa

HT201210 my iphone is suddendly got switch off while playing game . now how to resolve this problem

my iphone is suddendly got switch off while playing game . now how to resolve this problem

please iphone guide me how shall i restart my phone

HT4623 i have download 6.1 update softwer now how i update this to my iphone 4

i have download 6.1 update softwer now how i update this to my iphone 4

Using itunes right? plug iphone 4 to your computer then pressing "Shift" and click restore iphone. Dialog would come out, just select your 6.1 file.

I was on the apple support site and typed my question in the small box at the bottom but couldn't figure out how to send it. The person at the other end couldn't read what I typed.

I was on the apple support site and typed my question in the small box at the bottom but couldn't figure out how to send it. The person at the other end couldn't read what I typed. I have a new OS10.8.4 and can't find "empty cache" when I'm ready to close Safari. How do I do this? Thanks

https://discussions.apple.com/thread/4448839

Since my printer only prints in black, how do I get all the print on the screen to change to black?

My color printer prints ONLY in BLACK. The screen I want to print is printed on the monitor in blue and red. How can I make all the print black on the monitor so it will print black on my printer?

Explore the settings for you printer to see if there is a setting for "gray-scale" to un-check so that you do not get the gray when printing the blue or red text that shows on your monitor. You can click Print, then click Properties on the Print screen to see if you can change it; while there, look to see if there is an option to use the black cartridge only if that is what you want to do. On my printer, making the change there was only temporary and I had to do it through the software that came with my HP printer to make it permanent. Your printer manual would be a place to look also.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How do a print a PDF of a brochure that the printer can use to print from?

I have a brochure that is in color .... I want to print it in brochure format as a high quality pdf and then send it to the printer ... he will then use it to print the brochure.
How do I do it?

From the File menu, choose Export. Choose PDF and the type of PDF you desire to create on that dialog box.
PDFX-1a and PDFX-4 are safe bets for your job. If your job has elements that bleed off the page, make sure you look at the section for printers marks, and that crop marks is set, along with any other options your printer specifies (like page info, color bars, etc).
Take care, Mike

Ready to print. Now, how to send this to the printer?

Similar Messages

Maybe you are looking for