Readymade Dashboards using R3 Connection

Dear All
Is there any readymade dashboards avaialble in Service Market Place or any SAP site, which uses R3 as connection and not BW.
If so kindly provide details. I was instructed that SAP already provides some readymade dashboards to the customers..
I searched for it but not able to locate.
Kindly indicate if it is so..
Regards,
Venkat

Hi,
I guess you are talking about dashboard using web services consuming R/3 data. But from a demo dashboard you cannot view the underlying data connection. Refer below links for demo dashboards. But those dashboards would be either exported version or XLF file. You can open XLF file with source excel data in your designer and view.
You can search for details about creating dashboard using R/3 data.
links to dashboard demo.
[http://www.sdn.sap.com/irj/boc/xcelsius-samples]
[http://www.businessobjects.com/campaigns/esri/demos.asp]
Regards,
Nikhil Joy

Similar Messages

Error in Dashboard using XML connection

Hi Experts,
I have developed one Dashboard using XML connection but getting bellow attached error can any one guide me how to solve it.
I know that error is related to cross domain.xml please explain the what is cross domain.xml and guide me to solve issue.
Regards
Mahantesh(Monty)

Hello,
Please check if below notes are relevant:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…

Performance Issue in Dashboard using SAP BW NetWeaver Connection

HI Experts ,
We developed Dashboard which is based on BW Queries, However it is taking considerable amount time while executing.
We are using BO Dashboard SP2 version ,BO 4.1 and BI system 7.01 .
We are looking for few clarifications on SAP BO Xcelsius Dashboards.
Though we know limitations on component number and data volumes which could badly affect performance of the dashboard, We do have a requirement to handle huge data volumes and multiple components. Our source data lies in SAP BI system and we are using BICS connectivity/ Webi with QAAWS for updating data in BO dashboard .
Our requirement is too complex where we should be in a position to meet user expectations for complete view 75 KPI’s in a single Dashboard.
We have scenarios like YTD ,QTD and MTD other complex calculations in Bex Query.
Here are my questions,
Is there any way to provide complete functionality using large data sets to the users with the current architecture without any performance issues?
Are there any third party tools which can be used with BO Dashboard for the performance improvement and handling huge volumes?
Do you suggest any alternate solution for complete functionality?
Many thanks for your inputs in advance!
Regards
Venkat

Hi Rajesh,
Thank you so much for your response.
I have tried the way you suggested. But here my issue is , I have a prompt in my webi report based on months selection and it is a single valued prompt.
so I was able to schedule my report only for one month;whereas my dashboard needs to show values for one year data based on the months the user will select in the dashboard.
Though i use the WebI instance data in the dashboard , i getting only one month value, also I am not able to associate the selected month for the WebI instance in dashboard.
Is there any option to schedule webI report for different months and the dashboard has to pick the 12 months instance and the combo box selection in the dashboard must associate with it??
Please help me with your thoughts.

Saving Xcelsius Dashboard on 4.0 version using BICS connectivity

Hi All,
On the newly released SAP BO 4.0, could you tell if use BICS connectivity for Dashboards.... can we save the dashboard on BOBJ repository- CMS
and open this Dashboard in Infoview portal.?
(or)
do we have the Limitation of saving this Dashboard only in BW and use Enterprise Portal to view.
I know that in XI 3.1 version we have this limitation. Is this improved in 4.0?
Thanks!
-AK

Hi !
Dashboard Designer NW Connection + BI Launchpad(BO 4.0)

Business Objects Dashboard and Webi Connectivity

Hi All,
I am on BI 4.0 Sp6 and would like to create a BO Dashboard based on Webi Instance. What is the best approach to do the same.
1. I want the BO Dashboard data to be visible on Ipad ( hence no data source connections)
2. In case of live office , how does the refresh mechanism work
3. Does add on tools like XWIS help in mitigating the issue
Would like to hear best practices around the same.
Thanks
Vijay

Hi Vijay,
I am on BI 4.0 Sp6 and would like to create a BO Dashboard based on Webi Instance. What is the best approach to do the same.
If you are using LO connection, then its not mobile supported connections & struggled a lot to make it stabilize. but still its a good connection to view the data in dashboard design time.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b02e31fb-3568-2e10-e78f-92412c3c0a96?quicklink=index&…
Take look at the below links for the up's & down for BIWS Connection.
Xcelsius and Business Intelligence Web Services (BIWS)
Xcelsius and Business Intelligence Web Services (BIWS)- Part 2
http://everythingxcelsius.com/topics/web-intelligence
How to create Xcelsius Dashboard based of BI Web Service ( BIWS )
I want the BO Dashboard data to be visible on Ipad ( hence no data source connections)
If you are looking for a connection which is specific to mobile supported, then look into the below links.
You can get all aspect of information which is necessary to create a dashboard.
How to Configure and Access Dashboards from IPad
Dashboards currently support only data manager connections defined using Query Browser as Live Data connections and QaaWS and Flash variable connections support is planned in BI 4.1
In case of live office , how does the refresh mechanism work
Refresh can be done webi side by scheduling the report in repository or you can keep a refresh button in dashboard to refresh the data. I hope automatic refresh is not possible here.
Does add on tools like XWIS help in mitigating the issue
I have no idea regarding this,
Hope this helps.

Call Web Applications from Xcelsius using LiveOffice connections

Hi,
I have read the HTG: "How To... Call BEx Web Applications from SAP BusinessObjects Dashboards (Xcelsius) and vice versa" here on SDN. Problem is that it is using BW Connection as connection.
Is it be possible to call web applications using Live Office connections?
Br,
Sonni

Hi Sonni,
If you are building dashboard using live office connection and you want to give a drill down to detailed webi or crystal report, you can use Open document interface. In the particular HTG you have mentioned, Open document approach is not possible because dashboard is based on SAP BW. Since you are using live office, i guess you have the source report published in BOE and you can use open document approach here.
If this is not your requirement please mention your exact requirement.
Hope it helps you.
Regards,
Nikhil Joy

Issue while connecting BW query using BICS Connection

Hi All,
I have an Issue with Xcelsius while using the BICS connection .when i select the query from the BW System its throwing an Error #2032 . Can some one please help with a Solution.
Regards,
Raj

Hai
Its due to Connectivity Issue
http://www.pieterverstraeten.com/blog/interval-selection-sap-bics-connection-xcelsius-dashboards/
Dashboards with BICS connectivity and Infoview (BO4.0 Information Platform)
http://www.youtube.com/watch?v=1jw8xqkSx6w
http://www.femkekooij.nl/?p=579
I hope it helps.Assign Points if it useful
Thank u
Naveen

Project Overview Dashboards using TFS data

I have an assignment creating project dashboards - the overall health listing the remaining work, completed work, comparison of estimates with completion, burn down , bug distribution, Earned value calculation - All based only on TFS data. Any experienced
guys can just give me a start to create such a Dashboard using SSRS. Any samples are welcome.
Thanks
Divya

hi divya
did you look at the TFS team portal which already display some types of reports.
if your TFS installation is connect to a SharePoint installation than you can use the TFS Sharepoint Web Portal and easily add preconfigured reports.
here a few interesting links:
View progress on the team dashboard (home page)
Customizing Team Foundation Server Project Portals (TFS 2010)
Configure or add a project portal
Please use Mark as Answer if my post solved your problem and use Vote As Helpful if a post was useful.

Xcelsisus Dashboard to BPC connectivity

Hi All
We are using GetReportDefinitaion() function to get the run time data for our Xcelsius dashboard, which is connected to BPC 10.0. It is not generating the swf file when we try to see the preview, it hangs and black out. Please advice if we are missing any step.
Many thanks in advance.

Jeswin,
Below are few inputs...
Let us consider Approach 1:
BI -> SAP Auth -> Universe -> BOE -> BO Auth -> QAAWS -> BO Auth -> Xcelsius
We would like to have the swf generated to be refreshed every month with the latest data...
Anil- When ever data is refreshed in BI...Xcelsius dashboard refreshes with the current data..so you will always have the latest data displayed in your dashboard
The swf should also be available to be viewed outsite the organization network (Meaning it should have the latest data embedded within the file).
Anil- For this scenario best approach is to publish your dashboards onto portal and give access to the users to the portal.
I understand that to achive this the swf files have to be generated manually every month.
Anil- No, it is not necessary to generate every month, your dashboard refreshes with the current data.
Is there an dynamic way to acheive this like scheduling the xlf ?
Anil- No, there is no option as such to burst/Scheduling...
2. Also there is a Xcelsius Publishing Plugin from BO labs - Has any body tried this?
Xcelsius Publishing Plugin [original link is broken]
Anil- This plugin is for distributing the dashboard to multiple users...this is not like just plug and play. I had tried working on this, and it is not as easy as it is shown/explained...
P.S. Try publishing it onto InfoView.
Hope this helps...
-Anil

Another user of your computer is currently using this connection. This user must disconnect before you can log on.

Hello
I have a single computer that is going to be shared between 5 people. In an effort to save time. I wanted the users to have a single shared LOCAL login to the computer.
Then each user could pull up an RDS session through RDWEB on our 2012 r2 RDS farm.
However, when I attempt to log in more than one user through RDWEB I receive:
Another user of your computer is currently using this connection. This user must disconnect before you can log on.
I have done some research on this, and followed this advice, and did the following steps on all my RDS session host and broker servers
Enable Multiple RDP Sessions
- Log into the server using Remote Desktop.
- Open the start screen (press the Windows key) and type gpedit.msc and open it
- Go to Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections.
- Set Restrict Remote Desktop Services user to a single Remote Desktop Services session to Disabled.
- Double click Limit number of connections and set the RD Maximum Connections allowed to 999999.
However, it did not solve the problem. Anyone have suggestions?

Hi Michael,
In addition you can try below registry setting for multiple remote session.
HKEY_Local_Machine\SYSTEM\CurrentControlSet\Control\Terminal Server
fSingleSessionPerUser REG_DWORD 0x00000000
Note: By default the registry value is set to 1, but you need to change to 0.
Also if you are making connection through gateway then recheck whether the setting is enabled on gateway side for multiple session.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Transfering .csv file from SAP to NON-SAP using FTP connection

Dear All,
I am able to place the .CSV file successfully to other system using FTP connection, but when i open the file I could see the gaps between each record. I mean 1st line with the 1st record and 2nd line having a GAP and 3rd line with the 2nd record and so ..on as shown below
1     1/1/2009     0     41000027
2     1/1/2009     0     41000027
3     1/1/2009     0     41000027
I have declared an internal table as below
TYPES: BEGIN OF ty_charlist,
         line(5000) type c,
       END OF ty_charlist.
DATA: w_charlist TYPE ty_charlist,
             t_charlist TYPE TABLE OF ty_charlist.
And concatenating each field seperated by ','
CONCATENATE res1 res2 res3 res4 res5 res6 res7 res8 res9 res10 res11 res12 res13 res14 res15 res16 res17 res18 res19 res20 res21 res22 res23 res24 res25 res26 res27 res28 res29 res30 res31 res32 res33 res34 res35 res36 res37 res38 res39
INTO w_charlist-line SEPARATED BY ','.
APPEND w_charlist TO t_charlist.
Now T_CHARLIST contains 50 records which needs to be placed on other system. I can see 50 records but gap is coming
Here res1, res2 and so on are declared as TYPE STRING..
Please do help me this issue
Thanks
Prava

Hello dprava ,
Try to be assisted with these examples .
1. [http://wiki.sdn.sap.com/wiki/display/ABAP/FTPfiletransferinBackground]
2. [Reg: FTP Connection; - SAP examples programs
Thank you,
Boaz

WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" GETS OPENED.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECCT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT

WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???

Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options?

How to use JDBC Connection Pools in a standalone application?

Hi, there,
I have a question about how to use JDBC Connection Pools in an application. I know well about connection pool itself, but I am not quite sure how to keep the pool management object alive all the time to avoid being destroyed by garbage collection.
for example, at the website: http://www.developer.com/java/other/article.php/626291, there is a simple connection pool implementation. there are three classes:JDBCConnection, the application's gateway to the database; JDBCConnectionImpl, the real class/object to provide connection; and JDBCPool, the management class to manage connection pool composed by JDBCConnectionImpl. JDBCPool is designed by Singleton pattern to make sure only one instance. supposing there is only one client to use connection for many times, I guess it's ok because this client first needs instantiate JDBCPool and JDBCConnectionImpl and then will hold the reference to JDBCPool all the time. but how about many clients want to use this JDBCPool? supposing client1 finishes using JDBCPool and quits, then JDBCPool will be destroyed by garbage collection since there is no reference to it, also all the connections of JDBCConnectionImpl in this pool will be destroyed too. that means the next client needs recreate pool and connections! so my question is that if there is a way to keep pool management instance alive all the time to provide connection to any client at any time. I guess maybe I can set the pool management class as daemon thread to solve this problem, but I am not quite sure. besides, there is some other problems about daemon thread, for example, how to make sure there is only one daemon instance? how to quit it gracefully? because once the whole application quits, the daemon thread also quits by force. in that case, all the connections in the pool won't get chance to close.
I know there is another solution by JNDI if we develop servlet application. Tomcat provides an easy way to setup JNDI database pooling source that is available to JSP and Servlet. but how about a standalone application? I mean there is no JNDI service provider. it seems a good solution to combine Commons DBCP with JNID or Apache's Naming (http://jakarta.apache.org/commons/dbcp/index.html). but still, I don't know how to keep pool management instance alive all the time. once we create a JNDI enviroment or naming, if it will save in the memory automatically all the time? or we must implement it as a daemon thread?
any hint will be great apprieciated!
Sam

To my knoledge the pool management instance stays alive as long as the pool is alive. What you have to figure out is how to keep a reference to it if you need to later access it.

What is the best cable to use to connect my MacBook Pro to my LG HD TV

What is the best cable to use to connect my MacBook Pro to my LG HD TV?

Read the tv user manual to see what they recommend.

In the ReportDocument.Load method it tries to connect using the using the connection information embedded in the Report File

Post Author: bhaveshbusa
CA Forum: Crystal Reports
In the ReportDocument.Load method it tries to connect using the using the connection information embedded in the Report File. When the application calls ReportDocument.Load(reportFileName). This
tries to connect to the database using the connection information embedded in
the "reportFileName". This was only realised on checking the ODBC Trace
Log. The connection itself is not a problem. The problem is that the embedded
connection information is related to OLD production system. And failed
connections had raised some concerns.
Note: I am using
SetDataSource to populate the data for the report. So I don't need the
connection.
Is there any way I
can disable this auto-connect?
Thanks and
regards,
Bhavesh

960738 wrote:
I need a help in answering one of the issue encountered last week.
I have created a database link and tried to access the information from a table using the program written in another language. The password provided was incorrect for that user while creating database link. So we expected that,while retrieving the data, Database connection has to be errored out as password provided is incorrrect.
But unfortunately, user account was locked out. When i checked with DBAs they mentioned that it tries to connect 16 ports with in a min of time.we were shocked as it STOPS another scheduled jobs with that user. and affects production badly.
As per the program, it has to connect only one time and yesterday we tried to execute the program in DBAs observation and it errored out as expected. Didn't tried for multiple ports.
Now the question is, WHY the database connection established 16 times last week and caused user account locked. DBAs are unable to answer it. Any EXPERTs opinion on this would greatly appreciated.
I have verified managing ports in oracle documentation, it was mentioned that if one port is busy it will try to connect to another port in the range of ports mentioned during the installtion. DBAs verified ports related file and it was blank. and they are not agreeing with this reason. Please HELP me in finding the correct REASON for this.
is it a NETWORK issue or issue with DATABASE SERVER only?
Thanks
SSP
Edited by: 960738 on Sep 22, 2012 9:13 PMDBLINK is 100% oblivious to the fact any port exists.
DBLINK only contains username, password & TNS Alias.
can you post actual SQL & results?

Readymade Dashboards using R3 Connection

Similar Messages

Maybe you are looking for