Reagarding reports
Hi Genius,
Can we create an interactive report witout using the events
Thanks in advance
i think no
u have to use at line-selection
af pf
at user-command
it is not possible
but i m new to abap wait for someone else too.
reward points to all useful ans
Similar Messages
-
Clearity reagarding table which used in report..
Hi Everyone,
I have one querry regarding one report of material available in stock.My question is that to check material available in stock for only a prticular month which table i have to used, and my selection screen is only storage location and month.
Thanks & regard.Hello Everyone,
I generated one program to check the material available in stock but the data come out from my program is not matched with the TCODE -MCBA.In mcba s039 table is used but i used these MAKT,S031,MBEW,MARA,T001L because i didn't get data if i used S039 table. I am sending my program please check it and do need full correction.
Thanks&Regard.
<Garbled code removed by moderator. Post only relevant portion of source code using code tags>
Edited by: saketabap on Nov 9, 2011 8:11 AM
Edited by: Vinod Kumar on Nov 9, 2011 1:19 PM -
Hi,
I am trying to print the dunning report using F150 in Prod Server . I had even scheduled the run and I am getting in the status and printing complete, but when i go to SP01 for the spool I do not see the same.
Advice me what might be the reason.
Thanks ,
Vengal Rao.Hi
You may face this scenario, when Dunning has selected NO invoices for dunning.
If you need more assistance, please let us know dunning log with error details.
best reagards,
S. Habib Pasha. -
Right click not working on BI web report
Hi,
We are facing an issue while working with BI 7.0 on Web.
When we execute a report on the web and right-click anywhere on the characteristics, Menu options-Filter, Change Drilldown, Broadcast & Export etc - are displayed for the first time. After some time when we right click again, the menu options do not appear and even drag and drop does not work.Hi Nisha,
Could you help us with what GUI front end version and patch do u have, What BEx version are u using.
May be you should upgrade you gui to 7.10 and patch 11 or 12, and also install the corresponding BW and BI addOn.
Bim, Let us know what your version of BEX and GUI front end is.
reagards,
Sree.
Edited by: Sree Nair on Sep 8, 2009 7:19 AM -
Dear all,
How can I get a report of all Taxcode rates with tax jurisdiction if their no standard report what are the table from their I can get the data.
Thanks & reagards
Dipayan BoseHi
check foolowing link,it may usefull
[Tax Rate Table;
Regards
Kailas Ugale -
Tables for inventory report(proper sequence)---urgent
Hi all,
i want to write a report for physical inventory for both raw & finished goods.
in selection screen there will be customer, plant & date.
for this customer & current date, i have to extract the raw & finish goods (material & qty) from all storage locations under that plant.
can u plz tell me the proper sequence of the database tables , i need to use to achieve the above things?
it is urgent.
Thanks for ur help.
ur help will be appreaciated.
reagards
pabitraHi,
Please have a look at table:
LQUA - Quants
Krzys -
Hi Experts,
Where i can see the list of Held documents report of all users.
In SAP there is an option to see the own held documents..
But i need a single report, where i can see the list of all Held doc's posted by all other users.
Even i am not able find any particular table which stores all the held doc's.
Pls help me in this reagard.
Thanking you,
KannaHi Ravi,
Thanks for your quick response.
Now i am getting the required Held doc report.
Thanking you
Kanna -
PRODUCTION ORDER NO. DISPLAY IN QUERY REPORT
Hello Sir,
I need to display production order number in the following query, can you please reply that query,
select distinct t1.DocNum,t1.DocDate,t1.NumAtCard,t1.CardName,t4.U_desc,t4.DocEntry[GRNNO],t4.U_recqun[GRN-QTY],t6.U_PREACPT[Accepted],t6.U_BALQTY[Waiting for QC]
from OPDN t1 inner join PDN1 t2 on t1.DocEntry = t2.DocEntry inner join [@SU_SUBCONGRN] t3 on t1.DocNum= t3.U_grnno
inner join [@SU_SUBGRNLINES] t4 on t3.DocEntry = t4.DocEntry inner join [@TI_GRNINSPECTION] t5 on t3.DocNum = t5.U_SUBGRN
inner join [@TI_GRNLINE]t6 on t5.DocEntry = t6.DocEntry
where t1.DocDate>=[%0] and t1.DocDate<=[%1] and t1.CardName=[%2]
Reagards
PushpaHi Pushpa......
Is there any relation between Production Order table and any of the table taken in your query report?
If yes then please let me know.......
Then only you can get it linked with Production order......
Regards,
Rahul -
Display Report Title/Path in any place
Hi
I'd like to display the report name and path at any place of a report (f.e. a footer). Does anybody know if there's a variable where the report path/name is stored?
I only know how to display the name of the report in the title view and that's not flexible enough.
ThanksCheck http://obiee101.blogspot.com/2008/02/obiee-adding-session-variables-to.html
Use dashboard.currentPage
reagards
John
http://obiee101.blogspot.com -
MC+E Report not giving results for One Plant
Dear All,
I am executing MC+E standard report for four plants but I am not getting the output for one plant. This report fetches data from the table S001 while executing VA01. I checked that there are no entries for that plant in this table hence obviously I cann't get the output.
Can anyone suggest me where lies the problem. My SD consultant is able to generate invoices, but the result of VA01 are not getting reflected in S001.
Regards,
Alok.Dear Alok,
Same was the problem with me, one of my seniors helped me with it. The report does not reflect data for the other one, as somebody may have made changes to the standard Info Structure.Probably a 'Z' or 'Y' update group is mainatined and proper update rules are not attached to the info structure. Ask you SD consultant to check out the update rules. It is a big risk to make changes to the info structure as it may lead to loss of Master and may stop functioning of SAP across modules. Ask a expert from SD to work onto it.
Reagards,
Ashutosh
[email protected] -
Hi,
Where we can see the daily reports(Standard) with Opening balance in GL accounts, Customers and Vendors.
Thanks in advanceHi
You can see in in Line Item Display reports
If thr anything else let me know
Reagards
Raju.k -
RE: How to use BIRT Reports in ADF
HI Experts,
I am using jdeveloper 11.1.2.3.0 ,
I need to integrate the BIRT Reports into ADF application,
Can anyone give a solution for this one..
With Reagards,
Satishkumar NAnd what is your question?
I don't have ready to use code. You know what to do and start working on it. When you have a specific problem you ask here for help.
I don't even know the BIRT API you need, so you have to look it up yourself.
For hte streaming the data back to the client you can refere to JDev11.1.2.1.0: Handling images/files in ADF (Part 3) | JDev &amp; ADF Goodies
Timo -
Formating MSA Excel Reports created in MSY
Hello All,
we want to format a excel report, that was created in MSY.
for example we use the Business Query BSACTIVITY with 'from' and 'to' date parameters.
The result is then in the Excle sheet BSACTIVITY.
We have created some programming in the sub "Workbook_BeforeSave"
to copy the data from BSACTIVITY to a new sheet called Calender.
When we run the report creation a second time, the data is written to the same file again, but is not creating a new workbook.
Has anyone experience with the formating of those excelreport ?
We run CRM 40 SP 09.
Thank you for your help.
Best reagards
FrankHi,
I just want to push this topic.
For me it's the same problem. I want to format a Excel report which was created in MSY.
How can it be done to save the customized design of the excel sheet? Is it possible to save the design in MSY or is it necessary to create an excel makro?
Thanks in advance!
Regards,
Christian -
Re: Column is not getting displayed in the BI report
Hello Gurus,
I have developed a BI report with more number of parameters.
Case 1:
When i run my report , I am able to see data for particular condition but one column doesn't show any thing. All the rows in the column are blank.
Case 2
I tried to put the blank column as parameter, The Program works with out displaying that column data.
I am not sure where it is going wrong. I tried running the code in toad and i am able to see the data.
I have checked the code, Parameter description, length, Template and data definition.
Please help.
Thanks,
SreekanthHi ,
For that column did u changed any alias name in the query...
check ur template once by loading the xml data...
check that column form field that matches with the xml tag or not..
Thanks,
Ananth -
Open and cancelled Quote Report
Hi,
Can anyone give me the information for getting open and cancelled Quote Report?I hope you are using reason for rejection for cancelling quotations. If that is the case, you can use transaction VA25 to view the list of quotations. Here you can filter on two columns status and reason for rejection to view the report as per your requirement.
Regards,
GSL.
Maybe you are looking for
-
I'm having problems with my AirPort Extreme , it's saying that I have a private IP and that I need a DNS. Can any one help me
-
Fullscreen mode on Youtube (using Safari) isn't working correctly. Help?
When ever I try to put a video on fullscreen, it will pause the video, and start from the beginning (it does the same when I put it back to what I guess you would call normal mode). The sound also stops, but end up working again when it is in fullscr
-
Ampersand character encoding in generated xml
Hi, I'm generating xml from my relational database tables using XSU. I'm having a problem where my table column contains data with the ampersand symbol as in 'Black & White'. XSU generates my xml but i can't parse the generated xml till i convert the
-
Populate GLPCA - VKBUR (Sales Office) upon PGI
Hi I was wondering if there is any standard way of populating VKBUR Field in GLPCA Table upon PGI I know that in order to populate VBELN (Sales Order No) in GLPCA - There is a workaround that PGI must not be posted in VL01N.. It must be posted via VL
-
Does anyone have any pointers on how I can integrate Flex with Drools. I want to build a sample app (for my own learning experience) that will integrate Flex with this Open Source Rule Engine. Can anyone point me to a website or book? Thanks!